EXOCARB® AERO BLIZZARD® (2043)
Performance Carbide End Mills For Aluminum
Overview
The EXOCARB® Aero Blizzard® series is part of the OSG premium line of carbide high performance end mills specifically designed for either Aluminum or Copper alloys. Special end cut gashing and offset teeth permit large depths of cut and maximum feed per tooth. Made with polished flutes to enhance tool life and reduce BUE, this end mill yields 45-50% higher metal removal rates in roughing applications, and superior finishing capability.
Features
Refined geometry
Larger depth of cut and maximum feed per tooth
Ultra smooth Flutes
Enhances tool life by reducing BUE
DLC available on request
Ideal for rough and finish contouring
Lineup
Series
List 2010 - 2-Flute, Ball, Regular Length View Offering > View Overview >
List 2021 - 2-Flute, Stub, Square and Corner Radius View Offering > View Overview >
List 2022 - 2-Flute, Regular, Square and Corner Radius View Offering > View Overview >
List 2023 - 2-Flute, Reduced Neck, Square and Corner Radius View Offering > View Overview >
List 2024 - 2-Flute, Reduced Neck, Long , Square and Corner Radius View Offering > View Overview >
List 2041 - 3-Flute, Stub, Square and Corner Radius View Offering > View Overview >
List 2042 - 3-Flute, Regular, Square and Corner Radius View Offering > View Overview >
List 2043 - 3-Flute, Reduced Neck, Square and Corner Radius View Offering > View Overview >
List 2048 - 3-Flute, Reduced Neck, Long , Square and Corner Radius View Offering > View Overview >
Applications
Aluminum and Copper alloys
Any application where productivity and the lowest cost-per-unit is the goal
When spindle speed is limited (< 10,000 rpm)
Aerospace, Job Shops
Roughing, Finishing and Contouring
Application Guide
| ISO | Work Material | Recommended |
|---|---|---|
| P | Low Carbon Steel : 1010, 1018 |
|
| P | Medium Carbon Steel : 1035, 1045 |
|
| P | High Carbon Steel : 1065 |
|
| P | Alloy Steels : 4140, 4340 |
|
| P | Die Steels |
|
| M | Stainless Steels : 300 |
|
| M | Stainless Steels : 400 |
|
| M | Stainless Steels : 17-4PH |
|
| K | Cast Iron |
|
| N | Aluminum : 6061, 7075 |
|
| N | Aluminum : Casting |
|
| S | Nickel Alloy : Inconel |
|
| S | Titanium : 6AL4V (30HRC) |
|
| Other | Magnesium |
|
| Other | Brass, Bronze |
|
| Other | Graphite |
|
| Other | Cobalt-Chrome |
|
good best
Contact Us 
Product Search 
