EXOCARB® AERO BLIZZARD® (2021)

Performance Carbide End Mills For Aluminum

Overview

The EXOCARB® Aero Blizzard® series is part of the OSG premium line of carbide high performance end mills specifically designed for either Aluminum or Copper alloys. Special end cut gashing and offset teeth permit large depths of cut and maximum feed per tooth. Made with polished flutes to enhance tool life and reduce BUE, this end mill yields 45-50% higher metal removal rates in roughing applications, and superior finishing capability.

Features

Refined geometry

Larger depth of cut and maximum feed per tooth

Ultra smooth Flutes

Enhances tool life by reducing BUE

DLC available on request

Ideal for rough and finish contouring

Application Guide

ISO Work Material Recommended
P Low Carbon Steel : 1010, 1018
P Medium Carbon Steel : 1035, 1045
P High Carbon Steel : 1065
P Alloy Steels : 4140, 4340
P Die Steels
M Stainless Steels : 300
M Stainless Steels : 400
M Stainless Steels : 17-4PH
K Cast Iron
N Aluminum : 6061, 7075
N Aluminum : Casting
S Nickel Alloy : Inconel
S Titanium : 6AL4V (30HRC)
Other Magnesium
Other Brass, Bronze
Other Graphite
Other Cobalt-Chrome

good best

Lineup

Series

List 2010 - 2-Flute, Ball, Regular Length View Offering >   View Overview >

List 2021 - 2-Flute, Stub, Square and Corner Radius View Offering >   View Overview >

List 2022 - 2-Flute, Regular, Square and Corner Radius View Offering >   View Overview >

List 2023 - 2-Flute, Reduced Neck, Square and Corner Radius View Offering >   View Overview >

List 2024 - 2-Flute, Reduced Neck, Long , Square and Corner Radius View Offering >   View Overview >

List 2041 - 3-Flute, Stub, Square and Corner Radius View Offering >   View Overview >

List 2042 - 3-Flute, Regular, Square and Corner Radius View Offering >   View Overview >

List 2043 - 3-Flute, Reduced Neck, Square and Corner Radius View Offering >   View Overview >

List 2048 - 3-Flute, Reduced Neck, Long , Square and Corner Radius View Offering >   View Overview >

Applications

 

Aluminum and Copper alloys

 

Any application where productivity and the lowest cost-per-unit is the goal

 

When spindle speed is limited (< 10,000 rpm)

 

Aerospace, Job Shops

 

Roughing, Finishing and Contouring

Additional Information

WARNING:
When grinding or regrinding industrial cutting tools, residual grinding dust may occur. This dust may contain chemicals known to the state of California to cause cancer, birth defects, or other reproductive harm.
For more information go to www.P65Warnings.ca.gov