EXOTAP® DC OIL Taps (11057)

Premium Threading Solution for Cast Iron & Aluminum Castings

Overview

The EXOTAP®-DC taps are the industry leading tap for processing threads in Cast Iron, Ductile Iron and Cast Aluminum. The combination of ultra-strong rake with our VC10 powdered metal substrate makes this tap the absolute best soltion for threading ductile castings.

Features

Eccentic thread relief

Reduces friction during cutting, thereby minimizing heat generation and extending life.

Straight flute design

Most rigid cut tap design, suitable for both through and blind holes.

Multi-layered TiCN (V) coating from OSG

The layered configuration resists thermal cracking while increasing surface hardness to extend life up to 3X vs monolayered TiCN.

Available DIN or ANSI oberall lengths, coolant-through or solid, metric and inch, up to 1" or M24.

Absolute versatility for any machining operation in Ductile Iron.

Application Guide

ISO Work Material Recommended
P Low Carbon Steel : 1010, 1018
P Medium Carbon Steel : 1035, 1045
P High Carbon Steel : 1065
P Alloy Steels : 4140, 4340
P Die Steels
M Stainless Steels : 300
M Stainless Steels : 400
M Stainless Steels : 17-4PH
K Cast Iron
N Aluminum : 6061, 7075
N Aluminum : Casting
S Nickel Alloy : Inconel
S Titanium : 6AL4V (30HRC)
H Hardened Steels : ~35 HRC
H Hardened Steels : 35-45 HRC
H Hardened Steels : 45-50 HRC
H Hardened Steels : 50-70 HRC

good best

Lineup

Series

List 10052 - EXOTAP® DC View Offering >   View Overview >

List 10053 - EXOTAP® DC OIL View Offering >   View Overview >

List 10056 - EXOTAP® DC View Offering >   View Overview >

List 10057 - EXOTAP® DC OIL View Offering >   View Overview >

List 11052 - EXOTAP® DC View Offering >   View Overview >

List 11053 - EXOTAP® DC OIL View Offering >   View Overview >

List 11054 - EXOTAP® DC View Offering >   View Overview >

List 11055 - EXOTAP® DC OIL View Offering >   View Overview >

List 11056 - EXOTAP® DC View Offering >   View Overview >

List 11057 - EXOTAP® DC OIL View Offering >   View Overview >

Applications

 

Cast Iron, Ductile Iron, Cast Aluminum, Powdered Metal, Ductile Castings.

 

Utilize the coolant-thru the tool option for machines with spindle-through coolant to further optimize performance.

 

Combine with synchronized tapping and tap at speeds of 200~300 SFM in Cast Iron and beyond in Aluminum.

Literature

Additional Information

WARNING:
When grinding or regrinding industrial cutting tools, residual grinding dust may occur. This dust may contain chemicals known to the state of California to cause cancer, birth defects, or other reproductive harm.
For more information go to www.P65Warnings.ca.gov