SQUARE END

{"Number of Flutes":"2","Diameter - Inch (D)":["0.125","0.15625","0.1875","0.21875","0.25","0.28125","0.3125","0.34375","0.375","0.40625","0.4375","0.46875","0.5","0.625","0.75","1"],"Cutting Diameter Tolerance - Inch":"+0 / -0.002","Diameter - Fractional Size (D)":["1/8","5/32","3/16","7/32","1/4","9/32","5/16","11/32","3/8","13/32","7/16","15/32","1/2","5/8","3/4","1"],"Shank Diameter - Inch (d)":["0.125","0.1875","0.25","0.3125","0.375","0.4375","0.5","0.625","0.75","1"],"Product Overview":"2-Flute, Stub, Square & Corner Radius, Bright","Benefit 4":"3 - 5 times tool life","Overall Length - Inch (L)":["1.5","2","2.5","2.75","3","3.5","4"],"Length of Cut - Inch (Lc)":["0.25","0.3125","0.375","0.4375","0.5","0.5625","0.625","0.75","1","1.25"],"Helix Angle - Degree":"30","Benefit 2":"Enhances tool life by reducing BUE","List Name":["AERO BLIZZARD"],"Surface Treatment":["BRIGHT","Bright"],"Substrate":"Carbide","Benefit 3":"Ideal for rough and finish contouring","Units":"Inch","Cutting Type":"Center Cutting","Benefit 1":"Larger depth of cut and maximum feed per tooth","Shank Tolerance":"h6","Feature 3":"DLC available on request","Notes":"DLC coating available upon request. Additional corner radii available upon request.","Weldon Flat":"No","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Mill Type":"Single End","Full Description":"Performance Carbide End Mills For Aluminum","Short Description":"Performance Carbide End Mills For Aluminum","End Cut Type":["Square End","Corner Radius"],"Feature 1":"Refined geometry","Cutting Direction":"RH","Length of Cut - Specification":"STUB","Helix Direction":"RH","Feature 2":"Ultra smooth Flutes","Corner Radius - Inch (R)":["0.02","0.03","0.06","0.09","0.12"],"CategoryBrand":"EXOCARB","Diameter-Sizes":"1/8\" - 1\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"1.5\" - 4\"","Shank-Sizes":"0.125\" - 1\"","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202021/End_Mills_-_End_Mill_-_EXOCARB_AERO_Blizzard_-_List_2021_-_Catalog"],"Friendly Name":"2021"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202022/End_Mills_-_End_Mill_-_EXOCARB_AERO_Blizzard_-_List_2022_-_Catalog"],"Number of Flutes":"2","Diameter - Inch (D)":["0.125","0.15625","0.1875","0.21875","0.25","0.28125","0.3125","0.34375","0.375","0.40625","0.4375","0.46875","0.5","0.625","0.75","1"],"Cutting Diameter Tolerance - Inch":"+0 / -0.002","Diameter - Fractional Size (D)":["1/8","5/32","3/16","7/32","1/4","9/32","5/16","11/32","3/8","13/32","7/16","15/32","1/2","5/8","3/4","1"],"Shank Diameter - Inch (d)":["0.125","0.1875","0.25","0.3125","0.375","0.4375","0.5","0.625","0.75","1"],"Product Overview":"2-Flute, Regular, Square & Corner Radius, Bright","Benefit 4":"3 - 5 times tool life","Overall Length - Inch (L)":["1.5","2","2.5","2.75","3","3.5","4","5"],"Length of Cut - Inch (Lc)":["0.375","0.5625","0.75","0.8125","1","1.25","1.625","2"],"Helix Angle - Degree":"30","Benefit 2":"Enhances tool life by reducing BUE","List Name":"AERO BLIZZARD","Surface Treatment":"BRIGHT","Web Literature 1":"8002024CA-EM,85|8002024CA-EMT,45","Substrate":"Carbide","Benefit 3":"Ideal for rough and finish contouring","Units":"Inch","Web Literature 4":"800388CA","Cutting Type":"Center Cutting","Benefit 1":"Larger depth of cut and maximum feed per tooth","Shank Tolerance":"h6","Feature 3":"DLC available on request","Notes":"DLC coating available upon request. Additional corner radii available upon request.","View Speed and Feed Page":"Here","View Catalog Page":"Here","Weldon Flat":"No","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Mill Type":"Single End","Full Description":"Performance Carbide End Mills For Aluminum","Short Description":"Performance Carbide End Mills For Aluminum","End Cut Type":["Square End","Corner Radius"],"Feature 1":"Refined geometry","Length of Cut - Specification":"REGULAR","Cutting Direction":"RH","Helix Direction":"RH","Feature 2":"Ultra smooth Flutes","Corner Radius - Inch (R)":["0.01","0.02","0.03","0.06","0.09","0.12"],"Diameter-Sizes":"1/8\" - 1\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"1.5\" - 5\"","Shank-Sizes":"0.125\" - 1\"","Friendly Name":"2022","CategoryBrand":"EXOCARB"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202023/End_Mills_-_End_Mill_-_EXOCARB_AERO_Blizzard_-_List_2023_-_Catalog"],"Number of Flutes":"2","Neck Diameter - Inch (d1)":["0.246","0.496","0.621","0.746","0.992"],"Cutting Diameter Tolerance - Inch":"+0 / -0.002","Neck Length - Inch (L1)":["1.125","1.375","1.625","2","2.625"],"Diameter - Inch (D)":["0.25","0.5","0.625","0.75","1"],"Diameter - Fractional Size (D)":["1/4","1/2","5/8","3/4","1"],"Product Overview":"2-Flute, Reduced Neck, Square & Corner Radius, Bright","Benefit 4":"3 - 5 times tool life","Length of Cut - Inch (Lc)":["0.25","0.5","0.625","0.75","1"],"Shank Diameter - Inch (d)":["0.25","0.5","0.625","0.75","1"],"Helix Angle - Degree":"30","Overall Length - Inch (L)":["2.5","3","3.5","4","5"],"Benefit 2":"Enhances tool life by reducing BUE","List Name":"AERO BLIZZARD","Surface Treatment":"BRIGHT","Web Literature 1":"8002024CA-EM,86|8002024CA-EMT,45","Substrate":"Carbide","Benefit 3":"Ideal for rough and finish contouring","Units":"Inch","Web Literature 4":"800388CA","Cutting Type":"Center Cutting","Benefit 1":"Larger depth of cut and maximum feed per tooth","Shank Tolerance":"h6","Feature 3":"DLC available on request","Notes":"DLC coating available upon request.","View Speed and Feed Page":"Here","View Catalog Page":"Here","Weldon Flat":"No","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Mill Type":"Single End","Full Description":"Performance Carbide End Mills For Aluminum","Short Description":"Performance Carbide End Mills For Aluminum","Type (feature)":"Reduced Neck","End Cut Type":["Square End","Corner Radius"],"Feature 1":"Refined geometry","Cutting Direction":"RH","Length of Cut - Specification":"STUB","Helix Direction":"RH","Feature 2":"Ultra smooth Flutes","Corner Radius - Inch (R)":["0.02","0.03","0.06","0.09","0.12"],"Diameter-Sizes":"1/4\" - 1\"","Flute-Sizes":"-","Neck-Sizes":"1.125\" - 2.625\"","Taper-Sizes":"-","Overall-Sizes":"2.5\" - 5\"","Shank-Sizes":"0.25\" - 1\"","Friendly Name":"2023","CategoryBrand":"EXOCARB"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202024/End_Mills_-_End_Mill_-_EXOCARB_AERO_Blizzard_-_List_2024_-_Catalog"],"Number of Flutes":"2","Overall Length - Inch (L)":["4","6"],"Neck Diameter - Inch (d1)":["0.246","0.496","0.621","0.746","0.992"],"Cutting Diameter Tolerance - Inch":"+0 / -0.002","Diameter - Inch (D)":["0.25","0.5","0.625","0.75","1"],"Neck Length - Inch (L1)":["2.125","2.375","2.5","3.375"],"Diameter - Fractional Size (D)":["1/4","1/2","5/8","3/4","1"],"Product Overview":"2-Flute, Reduced Neck, Long Length, Square & Corner Radius, Bright","Benefit 4":"3 - 5 times tool life","Length of Cut - Inch (Lc)":["0.25","0.5","0.625","0.75","1"],"Shank Diameter - Inch (d)":["0.25","0.5","0.625","0.75","1"],"Helix Angle - Degree":"30","Benefit 2":"Enhances tool life by reducing BUE","List Name":"AERO BLIZZARD","Surface Treatment":"BRIGHT","Web Literature 1":"8002024CA-EM,87|8002024CA-EMT,45","Substrate":"Carbide","Benefit 3":"Ideal for rough and finish contouring","Units":"Inch","Web Literature 4":"800388CA","Cutting Type":"Center Cutting","Benefit 1":"Larger depth of cut and maximum feed per tooth","Shank Tolerance":"h6","Feature 3":"DLC available on request","Notes":"DLC coating available upon request.","View Speed and Feed Page":"Here","View Catalog Page":"Here","Weldon Flat":"No","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Mill Type":"Single End","Full Description":"Performance Carbide End Mills For Aluminum","Short Description":"Performance Carbide End Mills For Aluminum","Type (feature)":"Reduced Neck","End Cut Type":["Square End","Corner Radius"],"Feature 1":"Refined geometry","Cutting Direction":"RH","Length of Cut - Specification":"STUB","Helix Direction":"RH","Feature 2":"Ultra smooth Flutes","Corner Radius - Inch (R)":["0.02","0.03","0.06","0.09","0.12"],"Diameter-Sizes":"1/4\" - 1\"","Flute-Sizes":"-","Neck-Sizes":"2.125\" - 3.375\"","Taper-Sizes":"-","Overall-Sizes":"4\" - 6\"","Shank-Sizes":"0.25\" - 1\"","Friendly Name":"2024","CategoryBrand":"EXOCARB"}

{"Number of Flutes":"3","Corner Radius - Inch (R)":["0.01","0.02","0.03","0.06","0.09","0.12"],"Diameter - Inch (D)":["0.125","0.1875","0.25","0.3125","0.375","0.4375","0.5","0.625","0.75","1"],"Cutting Diameter Tolerance - Inch":"+0 / -0.002","Diameter - Fractional Size (D)":["1/8","3/16","1/4","5/16","3/8","7/16","1/2","5/8","3/4","1"],"Shank Diameter - Inch (d)":["0.125","0.1875","0.25","0.3125","0.375","0.4375","0.5","0.625","0.75","1"],"Benefit 4":"3 - 5 times tool life","Overall Length - Inch (L)":["1.5","2","2.5","2.75","3","3.5","4"],"Length of Cut - Inch (Lc)":["0.25","0.3125","0.375","0.4375","0.5","0.5625","0.625","0.75","1","1.25"],"Product Overview":"3-Flute, Stub, Square & Corner Radius, Bright","Benefit 2":"Enhances tool life by reducing BUE","Helix Angle - Degree":"45","List Name":["AERO BLIZZARD"],"Surface Treatment":"BRIGHT","Substrate":"Carbide","Benefit 3":"Ideal for rough and finish contouring","Units":"Inch","Cutting Type":"Center Cutting","Benefit 1":"Larger depth of cut and maximum feed per tooth","Shank Tolerance":"h6","End Cut Type":["Corner Radius","Square End"],"Feature 3":"DLC available on request","Notes":"DLC coating available upon request.","Weldon Flat":"No","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Mill Type":"Single End","Full Description":"Performance Carbide End Mills For Aluminum","Short Description":"Performance Carbide End Mills For Aluminum","Feature 1":"Refined geometry","Cutting Direction":"RH","Length of Cut - Specification":"STUB","Helix Direction":"RH","Feature 2":"Ultra smooth Flutes","CategoryBrand":"EXOCARB","Diameter-Sizes":"1/8\" - 1\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"1.5\" - 4\"","Shank-Sizes":"0.125\" - 1\"","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202041/End_Mills_-_End_Mill_-_EXOCARB_AERO_Blizzard_-_List_2041_-_Catalog"],"Friendly Name":"2041"}

{"Surface Treatment":["Bright","BRIGHT"],"Alloy Steels : 4140; 4340":[],"Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Aramid Fiber (AFRP)":"-","Benefit 1":"Larger depth of cut and maximum feed per tooth","Benefit 2":"Enhances tool life by reducing BUE","Benefit 3":"Ideal for rough and finish contouring","Benefit 4":"3 - 5 times tool life","Bottom Edge Radius - Metric (R2)":"-","Brass, Bronze":"-","Carbon Fiber (CFRP)":"-","Carbon Fiber / Al / Ti / CRES Stack":"-","Carbon Fiber / Aluminum Stack":"-","Carbon Fiber / Titanium Stack":"-","Carbon/Carbon":"-","Cast Iron":"-","Coating Thickness (µm)":"-","Cobalt-Chrome":"-","Compatible Machine":"-","Compression Length - Inch (L2)":"-","Contour Milling":"-","Coolant Thru":"No","Corner Chamfer - Inch (C)":"-","Corner Chamfer - Metric (C)":"-","Corner Radius - Inch (R)":["0.01","0.02","0.06","0.03","0.09","0.12"],"Corner Radius - Metric (R)":"-","Cut Incline Angle - Degree (α)":"-","Cut Incline Angle Tolerance - Degree":"-","Cutting Diameter Tolerance - Inch":"+0 / -0.002","Cutting Diameter Tolerance - Metric":"-","Cutting Direction":"RH","Cutting Type":"Center Cutting","Deep Side Milling":"-","Diameter - Fractional Size (D)":["1/8","3/16","1/4","5/16","3/8","7/16","1/2","5/8","3/4","1"],"Diameter - Inch (D)":["0.125","0.1875","0.25","0.3125","0.375","0.4375","0.5","0.625","0.75","1"],"Diameter - Metric (D)":"-","Diameter at Center of Radius - Metric (dm)":"-","Die Steels":"-","Edge Radius - Metric (R3)":"-","Effective Diameter - Inch (DCF)":"-","Effective Diameter - Metric (DCF)":"-","Effective Draft Angle - Degree (α)":"-","Effective Neck Length by Incline Angle 0.5° - Inch":"-","Effective Neck Length by Incline Angle 0.5° - Metric":"-","Effective Neck Length by Incline Angle 0° - Inch":"-","Effective Neck Length by Incline Angle 0° - Metric":"-","Effective Neck Length by Incline Angle 1.5° - Inch":"-","Effective Neck Length by Incline Angle 1.5° - Metric":"-","Effective Neck Length by Incline Angle 1° - Inch":"-","Effective Neck Length by Incline Angle 1° - Metric":"-","Effective Neck Length by Incline Angle 2.5° - Metric":"-","Effective Neck Length by Incline Angle 2° - Inch":"-","Effective Neck Length by Incline Angle 2° - Metric":"-","Effective Neck Length by Incline Angle 3° - Inch":"-","Effective Neck Length by Incline Angle 3° - Metric":"-","Effective Radius - Metric (rt)":"-","End Cut Type":["Square End","Corner Radius"],"Feature 1":"Refined geometry","Feature 2":"Ultra smooth Flutes","Feature 3":"DLC available on request","Feature 4":"-","Form Tolerance - Metric":"-","Full Description":"Performance Carbide End Mills For Aluminum","Glass Ceramics":"-","Glass Fiber (GFRP)":"-","Graphite":"-","Hardened Steels : 35 HRC":"-","Hardened Steels : 35-45 HRC":"-","Hardened Steels : 45-50 HRC":"-","Hardened Steels : 50-70 HRC":"-","Helical Milling":"-","Helix Angle - Degree":"45","Helix Direction":"RH","High Carbon Steel : 1065":"-","Honeycomb: AFRP":"-","Honeycomb: AI/AI":"-","Honeycomb: CFRP/AI":"-","Honeycomb: CFRP/Nomex":"-","Honeycomb: GFRP/Nomex":"-","Hybrid Ceramic / Composite":"-","Included Angle - Degree (α)":"-","Interference Angle - Degree (α)":"-","L/D Ratio":"-","Length of Cut - Inch (Lc)":["0.375","0.5625","0.625","0.8125","1","1.25","1.625","2"],"Length of Cut - Metric (Lc)":"-","Length of Cut - Specification":"REGULAR","Length to Center of Radius - Metric (Lm)":"-","List Name":"AERO BLIZZARD","Low Carbon Steel : 1010; 1018":"-","Magnesium":"-","Medium Carbon Steel : 1035; 1045":"-","Mill Type":"Single End","Neck Diameter - Inch (d1)":"-","Neck Diameter - Metric (d1)":"-","Neck Diameter Max - Inch (d1 Max)":"-","Neck Diameter Max - Metric (d1 Max)":"-","Neck Diameter Min - Inch (d1 Min)":"-","Neck Diameter Min - Metric (d1 Min)":"-","Neck Draft Angle - Degree (ß)":"-","Neck Length - Inch (L1)":"-","Neck Length - Metric (L1)":"-","Neck Taper Angle - Degree (α)":"-","Nickel Alloy : Inconel":"-","Non-Taper Neck Length - Inch (L2)":"-","Non-Taper Neck Length - Metric (L2)":"-","Notes":"DLC coating available upon request.","Number of Flutes":"3","Overall Length - Inch (L)":["1.5","2","2.5","2.75","3","3.5","4","5"],"Overall Length - Metric (L)":"-","PEEK":"-","Peripheral Edge Radius - Metric (R2)":"-","Plunging":"-","Product Overview":"3-Flute, Regular, Square & Corner Radius, Bright","Radius Tolerance - Inch":"-","Radius Tolerance - Metric":"-","Ramping":"-","Shank Diameter - Inch (d)":["0.125","0.1875","0.25","0.3125","0.375","0.4375","0.5","0.625","0.75","1"],"Shank Diameter - Metric (d)":"-","Shank Tolerance":"h6","Short Description":"Performance Carbide End Mills For Aluminum","Side Milling":"-","Slotting":"-","Stainless Steels : 17-4PH":"-","Stainless Steels : 300":"-","Stainless Steels : 400":"-","Substrate":"Carbide","Taper Angle Tolerance - Degree":"-","Taper Diameter - Metric (Ds)":"-","Taper per Side - Degree (α)":"-","Tilt Angle - Degree (α/2)":"-","Tip Radius - Metric (R1)":"-","Titanium":"-","Titanium : 6AL4V (30HRC)":"-","Trochoidal Milling":"-","Type":"-","Type (feature)":"-","Units":"Inch","Wax/PMMA":"-","Web Literature 1":"-","Web Literature 2":"-","Web Literature 3":"-","Web Literature 4":"-","Web Video 1":"-","Web Video 2":"-","Web Video 3":"-","Weldon Flat":"No","Zirconia":"-","View Speed and Feed Page":"-","View Catalog Page":"-","CategoryBrand":"EXOCARB","Diameter-Sizes":"1/8\" - 1\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"1.5\" - 5\"","Shank-Sizes":"0.125\" - 1\"","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202042/End_Mills_-_End_Mill_-_EXOCARB_AERO_Blizzard_-_List_2042_-_Catalog"],"Friendly Name":"2042"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202043/End_Mills_-_End_Mill_-_EXOCARB_AERO_Blizzard_-_List_2043_-_Catalog"],"Number of Flutes":"3","Neck Diameter - Inch (d1)":["0.246","0.496","0.621","0.746","0.992"],"Cutting Diameter Tolerance - Inch":"+0 / -0.002","Neck Length - Inch (L1)":["1.125","1.375","1.625","2","2.625"],"Diameter - Inch (D)":["0.25","0.5","0.625","0.75","1"],"Diameter - Fractional Size (D)":["1/4","1/2","5/8","3/4","1"],"Benefit 4":"3 - 5 times tool life","Length of Cut - Inch (Lc)":["0.25","0.5","0.625","0.75","1"],"Shank Diameter - Inch (d)":["0.25","0.5","0.625","0.75","1"],"Overall Length - Inch (L)":["2.5","3","3.5","4","5"],"Product Overview":"3-Flute, Reduced Neck, Square & Corner Radius, Bright","Benefit 2":"Enhances tool life by reducing BUE","Helix Angle - Degree":"45","List Name":"AERO BLIZZARD","Surface Treatment":"BRIGHT","Web Literature 1":"8002024CA-EM,88|8002024CA-EMT,47","Substrate":"Carbide","Benefit 3":"Ideal for rough and finish contouring","Units":"Inch","Web Literature 4":"800388CA","Cutting Type":"Center Cutting","Benefit 1":"Larger depth of cut and maximum feed per tooth","Shank Tolerance":"h6","Feature 3":"DLC available on request","Notes":"DLC coating available upon request.","View Speed and Feed Page":"Here","View Catalog Page":"Here","Weldon Flat":"No","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Mill Type":"Single End","Full Description":"Performance Carbide End Mills For Aluminum","Short Description":"Performance Carbide End Mills For Aluminum","Type (feature)":"Reduced Neck","End Cut Type":["Square End","Corner Radius"],"Feature 1":"Refined geometry","Cutting Direction":"RH","Length of Cut - Specification":"STUB","Helix Direction":"RH","Feature 2":"Ultra smooth Flutes","Corner Radius - Inch (R)":["0.02","0.03","0.06","0.09","0.12"],"Diameter-Sizes":"1/4\" - 1\"","Flute-Sizes":"-","Neck-Sizes":"1.125\" - 2.625\"","Taper-Sizes":"-","Overall-Sizes":"2.5\" - 5\"","Shank-Sizes":"0.25\" - 1\"","Friendly Name":"2043","CategoryBrand":"EXOCARB"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202048/End_Mills_-_End_Mill_-_EXOCARB_AERO_Blizzard_-_List_2048_-_Catalog"],"Overall Length - Inch (L)":["4","6"],"Number of Flutes":"3","Neck Diameter - Inch (d1)":["0.246","0.496","0.621","0.746","0.992"],"Cutting Diameter Tolerance - Inch":"+0 / -0.002","Diameter - Inch (D)":["0.25","0.5","0.625","0.75","1"],"Neck Length - Inch (L1)":["2.125","2.375","2.5","3.375"],"Diameter - Fractional Size (D)":["1/4","1/2","5/8","3/4","1"],"Benefit 4":"3 - 5 times tool life","Length of Cut - Inch (Lc)":["0.25","0.5","0.625","0.75","1"],"Shank Diameter - Inch (d)":["0.25","0.5","0.625","0.75","1"],"Product Overview":"3-Flute, Reduced Neck, Long Length, Square & Corner Radius, Bright","Benefit 2":"Enhances tool life by reducing BUE","Helix Angle - Degree":"45","List Name":"AERO BLIZZARD","Surface Treatment":"BRIGHT","Web Literature 1":"8002024CA-EM,89|8002024CA-EMT,47","Substrate":"Carbide","Benefit 3":"Ideal for rough and finish contouring","Units":"Inch","Web Literature 4":"800388CA","Cutting Type":"Center Cutting","Benefit 1":"Larger depth of cut and maximum feed per tooth","Shank Tolerance":"h6","Feature 3":"DLC available on request","Notes":"DLC coating available upon request.","View Speed and Feed Page":"Here","View Catalog Page":"Here","Weldon Flat":"No","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Mill Type":"Single End","Full Description":"Performance Carbide End Mills For Aluminum","Short Description":"Performance Carbide End Mills For Aluminum","Type (feature)":"Reduced Neck","End Cut Type":["Square End","Corner Radius"],"Feature 1":"Refined geometry","Cutting Direction":"RH","Length of Cut - Specification":"STUB","Helix Direction":"RH","Feature 2":"Ultra smooth Flutes","Corner Radius - Inch (R)":["0.02","0.03","0.06","0.09","0.12"],"Diameter-Sizes":"1/4\" - 1\"","Flute-Sizes":"-","Neck-Sizes":"2.125\" - 3.375\"","Taper-Sizes":"-","Overall-Sizes":"4\" - 6\"","Shank-Sizes":"0.25\" - 1\"","Friendly Name":"2048","CategoryBrand":"EXOCARB"}

{"Number of Flutes":"4","Diameter - Inch (D)":["0.125","0.25","0.3125","0.375","0.4375","0.5","0.625"],"Diameter - Fractional Size (D)":["1/8","1/4","5/16","3/8","7/16","1/2","5/8"],"Shank Diameter - Inch (d)":["0.125","0.25","0.3125","0.375","0.4375","0.5","0.625"],"Overall Length - Inch (L)":["1.5","2.5","2.75","3","3.5"],"Length of Cut - Inch (Lc)":["0.375","0.4375","0.8125","0.875","1","0.625","1.25"],"Helix Angle - Degree":"36-39","Benefit 2":"Enables smooth chip evacuation and depth of cut","Surface Treatment":"EXO","Product Overview":"4-Flute, Multiple Lengths, Square","List Name":["AERO UVX"],"Hardened Steels : 35 HRC":"H; Best","Substrate":"Carbide","Feature 2":"Ideal Flute Shape","Alloy Steels : 4140; 4340":"P; Best","Units":"Inch","Die Steels":"P; Best","Hardened Steels : 35-45 HRC":"H; Good","High Carbon Steel : 1065":"P; Best","Cutting Type":"Center Cutting","Cast Iron":"K; Good","Low Carbon Steel : 1010; 1018":"P; Best","Medium Carbon Steel : 1035; 1045":"P; Best","Shank Tolerance":"h6","Stainless Steels : 17-4PH":"M; Best","Stainless Steels : 300":"M; Best","Stainless Steels : 400":"M; Best","Full Description":"High Performance Variable Helix Carbide End Mills for Stainless Steel","Short Description":"High Performance Variable Helix Carbide End Mills for Stainless Steel","Weldon Flat":["No","Yes"],"Coolant Thru":"No","Feature 3":"Multi-layered TiAlN Coating","Benefit 3":"Multiple layers provide superior resistance to thermal cracking from heat, versus other mono-layered coatings","Mill Type":"Single End","Benefit 1":"Provides efficient milling and suppresses vibration","Benefit 4":"Smaller grain size yield more wear resistance and better coating adhesion properties for extended tool life","End Cut Type":"Square End","Length of Cut - Specification":["REGULAR","STUB"],"Cutting Direction":"RH","Helix Direction":"RH","Cutting Diameter Tolerance - Inch":"+0 / -0.0015","Feature 4":"Ultra-fine micrograin carbide","Nickel Alloy : Inconel":"S; Best","Titanium : 6AL4V (30HRC)":"S; Best","Feature 1":"Variable lead of the peripheral cutting edge and unequal spacing of end teeth","Aluminum : 6061; 7075":"-","Aluminum : Casting":"-","Aramid Fiber (AFRP)":"-","Bottom Edge Radius - Metric (R2)":"-","Brass, Bronze":"-","Carbon Fiber (CFRP)":"-","Carbon Fiber / Al / Ti / CRES Stack":"-","Carbon Fiber / Aluminum Stack":"-","Carbon Fiber / Titanium Stack":"-","Carbon/Carbon":"-","Coating Thickness (µm)":"-","Cobalt-Chrome":"-","Compatible Machine":"-","Compression Length - Inch (L2)":"-","Contour Milling":"-","Corner Chamfer - Inch (C)":"-","Corner Chamfer - Metric (C)":"-","Corner Radius - Inch (R)":"-","Corner Radius - Metric (R)":"-","Cut Incline Angle - Degree (α)":"-","Cut Incline Angle Tolerance - Degree":"-","Cutting Diameter Tolerance - Metric":"-","Deep Side Milling":"-","Diameter - Metric (D)":"-","Diameter at Center of Radius - Metric (dm)":"-","Edge Radius - Metric (R3)":"-","Effective Diameter - Inch (DCF)":"-","Effective Diameter - Metric (DCF)":"-","Effective Draft Angle - Degree (α)":"-","Effective Neck Length by Incline Angle 0.5° - Inch":"-","Effective Neck Length by Incline Angle 0.5° - Metric":"-","Effective Neck Length by Incline Angle 0° - Inch":"-","Effective Neck Length by Incline Angle 0° - Metric":"-","Effective Neck Length by Incline Angle 1.5° - Inch":"-","Effective Neck Length by Incline Angle 1.5° - Metric":"-","Effective Neck Length by Incline Angle 1° - Inch":"-","Effective Neck Length by Incline Angle 1° - Metric":"-","Effective Neck Length by Incline Angle 2.5° - Metric":"-","Effective Neck Length by Incline Angle 2° - Inch":"-","Effective Neck Length by Incline Angle 2° - Metric":"-","Effective Neck Length by Incline Angle 3° - Inch":"-","Effective Neck Length by Incline Angle 3° - Metric":"-","Effective Radius - Metric (rt)":"-","Form Tolerance - Metric":"-","Glass Ceramics":"-","Glass Fiber (GFRP)":"-","Graphite":"-","Hardened Steels : 45-50 HRC":"-","Hardened Steels : 50-70 HRC":"-","Helical Milling":"-","Honeycomb: AFRP":"-","Honeycomb: AI/AI":"-","Honeycomb: CFRP/AI":"-","Honeycomb: CFRP/Nomex":"-","Honeycomb: GFRP/Nomex":"-","Hybrid Ceramic / Composite":"-","Included Angle - Degree (α)":"-","Interference Angle - Degree (α)":"-","L/D Ratio":"-","Length of Cut - Metric (Lc)":"-","Length to Center of Radius - Metric (Lm)":"-","Magnesium":"-","Neck Diameter - Inch (d1)":"-","Neck Diameter - Metric (d1)":"-","Neck Diameter Max - Inch (d1 Max)":"-","Neck Diameter Max - Metric (d1 Max)":"-","Neck Diameter Min - Inch (d1 Min)":"-","Neck Diameter Min - Metric (d1 Min)":"-","Neck Draft Angle - Degree (ß)":"-","Neck Length - Inch (L1)":"-","Neck Length - Metric (L1)":"-","Neck Taper Angle - Degree (α)":"-","Non-Taper Neck Length - Inch (L2)":"-","Non-Taper Neck Length - Metric (L2)":"-","Notes":"-","Overall Length - Metric (L)":"-","PEEK":"-","Peripheral Edge Radius - Metric (R2)":"-","Plunging":"-","Radius Tolerance - Inch":"-","Radius Tolerance - Metric":"-","Ramping":"-","Shank Diameter - Metric (d)":"-","Side Milling":"-","Slotting":"-","Taper Angle Tolerance - Degree":"-","Taper Diameter - Metric (Ds)":"-","Taper per Side - Degree (α)":"-","Tilt Angle - Degree (α/2)":"-","Tip Radius - Metric (R1)":"-","Titanium":"-","Trochoidal Milling":"-","Type":"-","Type (feature)":"-","Wax/PMMA":"-","Web Literature 1":"-","Web Literature 2":"-","Web Literature 3":"-","Web Literature 4":"-","Web Video 1":"-","Web Video 2":"-","Web Video 3":"-","Zirconia":"-","View Speed and Feed Page":"-","View Catalog Page":"-","CategoryBrand":"EXOCARB","Diameter-Sizes":"1/8\" - 0.625\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"1.5\" - 3.5\"","Shank-Sizes":"0.125\" - 0.625\"","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202050/End_Mills_-_End_Mill_-_EXOCARB_AERO_UVX_-_List_2050_-_Catalog"],"Friendly Name":"2050"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FRouters%2FList%202064/Composites_-_Router_-_EXOPRO_AERO-HBC_45_-_List_2064_-_Catalog"],"Overall Length - Inch (L)":["3","4"],"Number of Flutes":"4","Compression Length - Inch (L2)":["0.25","0.375","0.5"],"Cutting Diameter Tolerance - Inch":"+0 / -0.002","Diameter - Inch (D)":["0.25","0.375","0.5"],"Diameter - Fractional Size (D)":["1/4","3/8","1/2"],"Shank Diameter - Inch (d)":["0.25","0.375","0.5"],"Length of Cut - Inch (Lc)":["0.75","2","1"],"Helix Angle - Degree":"45","Product Overview":"4-Flute, Herringbone, OSG CVD Diamond, 45 Degree","List Name":"AERO-HBC 45","Web Literature 1":"8002024CA-EM,330|8002024CA-EMT,172","Web Literature 2":"800212CA-V4","Carbon Fiber (CFRP)":"Other; Best","Glass Fiber (GFRP)":"Other; Best","Aramid Fiber (AFRP)":"Other; Good","Honeycomb: AFRP":"Other; Good","Honeycomb: AI/AI":"Other; Good","Honeycomb: CFRP/AI":"Other; Good","Honeycomb: CFRP/Nomex":"Other; Good","Honeycomb: GFRP/Nomex":"Other; Good","Substrate":"Carbide","Units":"Inch","Web Literature 4":"800388CA","Cutting Type":"Center Cutting","Feature 1":"Compression mechanism","Type (feature)":"Compression Router","Benefit 2":"Long tool life","Feature 2":"Low cutting force","Shank Tolerance":"h6","Surface Treatment":"DIAMOND","View Speed and Feed Page":"Here","View Catalog Page":"Here","Weldon Flat":"No","Benefit 1":"Neutralizes cutting forces to prevent delamination on both top and bottom laminates.","Coolant Thru":"No","Mill Type":"Single End","Full Description":"Premium High Performance Routers for Composites (CFRP)","Short Description":"Premium High Performance Routers for Composites (CFRP)","End Cut Type":"Square End","Length of Cut - Specification":["REGULAR","EXTRA LONG","LONG"],"Cutting Direction":"RH","Diameter-Sizes":"1/4\" - 0.5\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"3\" - 4\"","Shank-Sizes":"0.25\" - 0.5\"","Friendly Name":"2064","CategoryBrand":"EXOPRO"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FRouters%2FList%202066/Composites_-_Router_-_EXOPRO_AERO-HBC_-_List_2066_-_Catalog","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FRouters%2FList%202066/Composites_-_Router_-_EXOPRO_AERO-HBC_-_List_2066_-_30_-_Angle_1","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FRouters%2FList%202066/Composites_-_Router_-_EXOPRO_AERO-HBC_-_List_2066_-_30_-_Face_1","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FRouters%2FList%202066/Composites_-_Router_-_EXOPRO_AERO-HBC_-_List_2066_-_30_-_Extra_1","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FRouters%2FList%202066/Composites_-_Router_-_EXOPRO_AERO-HBC_-_List_2066_-_30_-_Extra_2"],"Number of Flutes":"4","Compression Length - Inch (L2)":["0.125","0.25","0.375","0.5"],"Diameter - Inch (D)":["0.125","0.25","0.375","0.5"],"Cutting Diameter Tolerance - Inch":"+0 / -0.002","Diameter - Fractional Size (D)":["1/8","1/4","3/8","1/2"],"Shank Diameter - Inch (d)":["0.125","0.25","0.375","0.5"],"Overall Length - Inch (L)":["1.5","2.5","3"],"Helix Angle - Degree":"30","Length of Cut - Inch (Lc)":["0.56","0.75","0.875","1.5"],"Product Overview":"4-Flute, Herringbone, OSG CVD Diamond","List Name":"AERO-HBC","Web Literature 1":"8002024CA-EM,329|8002024CA-EMT,172","Web Literature 2":"800212CA-V4","Carbon Fiber (CFRP)":"Other; Best","Glass Fiber (GFRP)":"Other; Best","Aramid Fiber (AFRP)":"Other; Good","Honeycomb: AFRP":"Other; Good","Honeycomb: AI/AI":"Other; Good","Honeycomb: CFRP/AI":"Other; Good","Honeycomb: CFRP/Nomex":"Other; Good","Honeycomb: GFRP/Nomex":"Other; Good","Substrate":"Carbide","Units":"Inch","Web Literature 4":"800388CA","Cutting Type":"Center Cutting","Length of Cut - Specification":["LONG","REGULAR"],"Feature 1":"Compression mechanism","Type (feature)":"Compression Router","Benefit 2":"Long tool life","Feature 2":"Low cutting force","Shank Tolerance":"h6","Surface Treatment":"DIAMOND","View Speed and Feed Page":"Here","View Catalog Page":"Here","Weldon Flat":"No","Benefit 1":"Neutralizes cutting forces to prevent delamination on both top and bottom laminates.","Coolant Thru":"No","Mill Type":"Single End","Full Description":"Premium High Performance Routers for Composites (CFRP)","Short Description":"Premium High Performance Routers for Composites (CFRP)","End Cut Type":"Square End","Cutting Direction":"RH","Diameter-Sizes":"1/8\" - 0.5\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"1.5\" - 3\"","Shank-Sizes":"0.125\" - 0.5\"","Friendly Name":"2066","CategoryBrand":"EXOPRO"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FRouters%2FList%202068/Composites_-_Router_-_EXOPRO_AERO-HBC_60_-_List_2068_-_Catalog","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FRouters%2FList%202068/Composites_-_Router_-_EXOPRO_AERO-HBC_60_-_List_2068_-_Angle"],"Overall Length - Inch (L)":["3","4"],"Number of Flutes":"2","Compression Length - Inch (L2)":["0.188","0.281","0.375"],"Cutting Diameter Tolerance - Inch":"+0 / -0.002","Diameter - Inch (D)":["0.25","0.375","0.5"],"Diameter - Fractional Size (D)":["1/4","3/8","1/2"],"Product Overview":"2-Flute, Herringbone, OSG CVD Diamond, 60 Degree","Shank Diameter - Inch (d)":["0.25","0.375","0.5"],"Length of Cut - Inch (Lc)":["0.75","2","1"],"Helix Angle - Degree":"60","List Name":"AERO-HBC 60","Web Literature 1":"8002024CA-EM,331|8002024CA-EMT,173","Web Literature 2":"800212CA-V4","Carbon Fiber (CFRP)":"Other; Best","Glass Fiber (GFRP)":"Other; Best","Honeycomb: AFRP":"Other; Best","Honeycomb: AI/AI":"Other; Best","Honeycomb: CFRP/AI":"Other; Best","Honeycomb: CFRP/Nomex":"Other; Best","Honeycomb: GFRP/Nomex":"Other; Best","Aramid Fiber (AFRP)":"Other; Good","Substrate":"Carbide","Units":"Inch","Web Literature 4":"800388CA","Cutting Type":"Center Cutting","Feature 1":"Compression mechanism","Type (feature)":"Compression Router","Benefit 2":"Long tool life","Feature 2":"Low cutting force","Shank Tolerance":"h6","Surface Treatment":"DIAMOND","View Speed and Feed Page":"Here","View Catalog Page":"Here","Weldon Flat":"No","Benefit 1":"Neutralizes cutting forces to prevent delamination on both top and bottom laminates.","Coolant Thru":"No","Mill Type":"Single End","Full Description":"Premium High Performance Routers for Composites (CFRP)","Short Description":"Premium High Performance Routers for Composites (CFRP)","End Cut Type":"Square End","Length of Cut - Specification":["REGULAR","EXTRA LONG","LONG"],"Cutting Direction":"RH","Diameter-Sizes":"1/4\" - 0.5\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"3\" - 4\"","Shank-Sizes":"0.25\" - 0.5\"","Friendly Name":"2068","CategoryBrand":"EXOPRO"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202100/End_Mills_-_End_Mill_-_List_2100_-_EXOCARB_AERO_UVX-Ti_-_Catalog"],"Number of Flutes":"5","Cutting Diameter Tolerance - Inch":"+0 / -0.002","Diameter - Fractional Size (D)":["1/2","5/8","3/4","1","1-1/4"],"Diameter - Inch (D)":["0.5","0.625","0.75","1","1.25"],"Length of Cut - Inch (Lc)":["0.625","1","1.25","1.625","1.875","1.5","2.25","3","4"],"Overall Length - Inch (L)":["2.5","3","3.5","4","5","6","7"],"Shank Diameter - Inch (d)":["0.5","0.625","0.75","1","1.25"],"Stainless Steels : 300":"M; Good","Helix Angle - Degree":"41-42-43","Surface Treatment":"EXO","Stainless Steels : 400":"M; Good","Benefit 2":"For efficient milling and suppressed vibration","List Name":"AERO UVX-TI-5FL","Benefit 4":"For increased rigidity and high efficient milling","Benefit 3":"For smooth chip evacuation","Benefit 1":"For stable, vibration-free milling","Web Literature 1":"8002024CA-EM,74|8002024CA-EMT,40","Substrate":"Carbide","Feature 3":"Ideal Flute Shape","Units":"Inch","Web Literature 4":"800388CA","Product Overview":"Carbide, EXO Coating, 5 Flute","Cutting Type":"Center Cutting","Shank Tolerance":"h6","Stainless Steels : 17-4PH":"M; Good","View Speed and Feed Page":"Here","View Catalog Page":"Here","Weldon Flat":"No","Coolant Thru":"No","Mill Type":"Single End","End Cut Type":"Square End","Cutting Direction":"RH","Length of Cut - Specification":["STUB","REGULAR","LONG"],"Helix Direction":"RH","Feature 1":"Unequal Spacing of End Teeth","Feature 2":"Variable Lead","Full Description":"Variable Lead End Mill for Titanium Alloy","Short Description":"Variable Lead End Mill for Titanium Alloy","Titanium : 6AL4V (30HRC)":"S; Best","Feature 4":"Web Taper","Diameter-Sizes":"1/2\" - 1.25\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"2.5\" - 7\"","Shank-Sizes":"0.5\" - 1.25\"","Friendly Name":"2100","CategoryBrand":"EXOCARB"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202102/End_Mills_-_End_Mill_-_List_2102_-_EXOCARB_AERO_UVX-Ti_-_Reduced_Neck_-_Catalog"],"Overall Length - Inch (L)":["3.5","4","6.5","5.5","6"],"Number of Flutes":"5","Neck Diameter - Inch (d1)":["0.48","0.605","0.73","0.98","1.23"],"Cutting Diameter Tolerance - Inch":"+0 / -0.002","Neck Length - Inch (L1)":["1.5","1.875","2.25","3","3.75"],"Diameter - Fractional Size (D)":["1/2","5/8","3/4","1","1-1/4"],"Diameter - Inch (D)":["0.5","0.625","0.75","1","1.25"],"Length of Cut - Inch (Lc)":["1","1.25","1.5","2","2.5"],"Shank Diameter - Inch (d)":["0.5","0.625","0.75","1","1.25"],"Stainless Steels : 300":"M; Good","Helix Angle - Degree":"41-42-43","Surface Treatment":"EXO","Stainless Steels : 400":"M; Good","Benefit 2":"For efficient milling and suppressed vibration","List Name":"AERO UVX-TI-LN-5FL","Benefit 4":"For increased rigidity and high efficient milling","Benefit 3":"For smooth chip evacuation","Benefit 1":"For stable, vibration-free milling","Web Literature 1":"8002024CA-EM,75|8002024CA-EMT,40","Substrate":"Carbide","Feature 3":"Ideal Flute Shape","Units":"Inch","Web Literature 4":"800388CA","Product Overview":"Carbide, EXO Coating, 5 Flute, Regular Length, Reduced Neck, Square End","Cutting Type":"Center Cutting","Shank Tolerance":"h6","Stainless Steels : 17-4PH":"M; Good","View Speed and Feed Page":"Here","View Catalog Page":"Here","Weldon Flat":"No","Coolant Thru":"No","Mill Type":"Single End","Type (feature)":"Reduced Neck","End Cut Type":"Square End","Length of Cut - Specification":"REGULAR","Cutting Direction":"RH","Helix Direction":"RH","Feature 1":"Unequal Spacing of End Teeth","Feature 2":"Variable Lead","Full Description":"Variable Lead End Mill for Titanium Alloy","Short Description":"Variable Lead End Mill for Titanium Alloy","Titanium : 6AL4V (30HRC)":"S; Best","Feature 4":"Web Taper","Diameter-Sizes":"1/2\" - 1.25\"","Flute-Sizes":"-","Neck-Sizes":"1.5\" - 3.75\"","Taper-Sizes":"-","Overall-Sizes":"3.5\" - 6.5\"","Shank-Sizes":"0.5\" - 1.25\"","Friendly Name":"2102","CategoryBrand":"EXOCARB"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202104/End_Mills_-_End_Mill_-_List_2104_-_EXOCARB_AERO_UVX-Ti_-_Reduced_Neck_-_Catalog"],"Length of Cut - Metric (Lc)":["24","32","40","50"],"Number of Flutes":"5","Shank Diameter - Metric (d)":["12","16","20","25"],"Neck Diameter - Metric (d1)":["11.5","15.5","19.5","24.5"],"Cutting Diameter Tolerance - Metric":"+0 / -0.050","Overall Length - Metric (L)":["90","100","120","140"],"Neck Length - Metric (L1)":["36","48","60","75"],"Diameter - Metric (D)":["12","16","20","25"],"Stainless Steels : 17-4PH":"M; Good","Helix Angle - Degree":"41-42-43","Surface Treatment":"EXO","Web Literature 4":"800388CA","Stainless Steels : 300":"M; Good","Benefit 2":"For efficient milling and suppressed vibration","List Name":"AERO UVX-TI-LN-5FL","Benefit 4":"For increased rigidity and high efficient milling","Benefit 3":"For smooth chip evacuation","Benefit 1":"For stable, vibration-free milling","Web Literature 1":"8002024CA-EM,76|8002024CA-EMT,41","Feature 3":"Ideal Flute Shape","Substrate":"Carbide","Product Overview":"Carbide, EXO Coating, 5 Flute, Regular Length, Reduced Neck, Square End","Cutting Type":"Center Cutting","Shank Tolerance":"h6","View Speed and Feed Page":"Here","View Catalog Page":"Here","Stainless Steels : 400":"M; Good","Units":"Metric","Weldon Flat":"No","Coolant Thru":"No","Mill Type":"Single End","Type (feature)":"Reduced Neck","End Cut Type":"Square End","Length of Cut - Specification":"REGULAR","Cutting Direction":"RH","Helix Direction":"RH","Feature 1":"Unequal Spacing of End Teeth","Feature 2":"Variable Lead","Full Description":"Variable Lead End Mill for Titanium Alloy","Short Description":"Variable Lead End Mill for Titanium Alloy","Titanium : 6AL4V (30HRC)":"S; Best","Feature 4":"Web Taper","Diameter-Sizes":"12mm - 25mm","Flute-Sizes":"-","Neck-Sizes":"36mm - 75mm","Taper-Sizes":"-","Overall-Sizes":"90mm - 140mm","Shank-Sizes":"12mm - 25mm","Friendly Name":"2104","CategoryBrand":"EXOCARB"}

{"Surface Treatment":"DLC-IGUSS","Alloy Steels : 4140; 4340":[],"Aluminum : 6061; 7075":"-","Aluminum : Casting":"-","Aramid Fiber (AFRP)":"-","Benefit 1":"Combines microscopic tool sharpness & tool wear resistance while achieving a good surface finish in a range of plastics from engineering plastics to super engineering plastics.","Benefit 2":"Cutting tool design allows for low cutting forces, reduced heat generation, and burr free machining.","Benefit 3":"High accuracy tooling designed for the demanding needs of the semiconductor industry.","Benefit 4":"Resulting in a sharp cutting edge for free machining in resins.","Bottom Edge Radius - Metric (R2)":"-","Brass, Bronze":"-","Carbon Fiber (CFRP)":"-","Carbon Fiber / Al / Ti / CRES Stack":"-","Carbon Fiber / Aluminum Stack":"-","Carbon Fiber / Titanium Stack":"-","Carbon/Carbon":"-","Cast Iron":"-","Coating Thickness (µm)":"-","Cobalt-Chrome":"-","Compatible Machine":"-","Compression Length - Inch (L2)":"-","Contour Milling":"-","Coolant Thru":"No","Corner Chamfer - Inch (C)":"-","Corner Chamfer - Metric (C)":"-","Corner Radius - Inch (R)":"-","Corner Radius - Metric (R)":"-","Cut Incline Angle - Degree (α)":"-","Cut Incline Angle Tolerance - Degree":"-","Cutting Diameter Tolerance - Inch":"-","Cutting Diameter Tolerance - Metric":["+0 / -0.015","-0.005 / -0.02"],"Cutting Direction":"RH","Cutting Type":"Center Cutting","Deep Side Milling":"-","Diameter - Fractional Size (D)":"-","Diameter - Inch (D)":"-","Diameter - Metric (D)":["0.5","1","2","3","4","6"],"Diameter at Center of Radius - Metric (dm)":"-","Die Steels":"-","Edge Radius - Metric (R3)":"-","Effective Diameter - Inch (DCF)":"-","Effective Diameter - Metric (DCF)":"-","Effective Draft Angle - Degree (α)":"-","Effective Neck Length by Incline Angle 0.5° - Inch":"-","Effective Neck Length by Incline Angle 0.5° - Metric":"-","Effective Neck Length by Incline Angle 0° - Inch":"-","Effective Neck Length by Incline Angle 0° - Metric":"-","Effective Neck Length by Incline Angle 1.5° - Inch":"-","Effective Neck Length by Incline Angle 1.5° - Metric":"-","Effective Neck Length by Incline Angle 1° - Inch":"-","Effective Neck Length by Incline Angle 1° - Metric":"-","Effective Neck Length by Incline Angle 2.5° - Metric":"-","Effective Neck Length by Incline Angle 2° - Inch":"-","Effective Neck Length by Incline Angle 2° - Metric":"-","Effective Neck Length by Incline Angle 3° - Inch":"-","Effective Neck Length by Incline Angle 3° - Metric":"-","Effective Radius - Metric (rt)":"-","End Cut Type":"Square End","Feature 1":"DLC-IGUSS Coated","Feature 2":"3 Flute with low helix, Specialized for resins","Feature 3":"Strict dimensional control with tool diameter tolerances of 0.015mm or better","Feature 4":"Cutting edge ground to a point","Form Tolerance - Metric":"-","Full Description":"OSG's advanced DLC coated carbide end mill, designed for super engineering plastics. This tool is ideal for precise resin machining, ensuring micro-features with high accuracy. \n\nIt boasts a long tool life thanks to the DLC-IGUSS coating, combining exceptional cutting performance with efficient chip evacuation. The sharp cutting edge ensures a smooth machined surface without chatter, while the optimized flute design allows for aggressive cutting parameters. The SEP-EL's three flute configuration for tools larger than 1mm excels in high heat-resistant thermoplastic resin processing, reducing wear on the cutting edge for continuous use. \n\nExperience unmatched efficiency and durability with our DLC coated carbide end mill, your ultimate tool for high-performance resin applications. \n","Glass Ceramics":"-","Glass Fiber (GFRP)":"-","Graphite":"-","Hardened Steels : 35 HRC":"-","Hardened Steels : 35-45 HRC":"-","Hardened Steels : 45-50 HRC":"-","Hardened Steels : 50-70 HRC":"-","Helical Milling":"-","Helix Angle - Degree":"25","Helix Direction":"RH","High Carbon Steel : 1065":"-","Honeycomb: AFRP":"-","Honeycomb: AI/AI":"-","Honeycomb: CFRP/AI":"-","Honeycomb: CFRP/Nomex":"-","Honeycomb: GFRP/Nomex":"-","Hybrid Ceramic / Composite":"-","Included Angle - Degree (α)":"-","Interference Angle - Degree (α)":"-","L/D Ratio":["3","5"],"Length of Cut - Inch (Lc)":"-","Length of Cut - Metric (Lc)":["1.5","3","6","9","12","18","2.5","5","10","15","20","30"],"Length of Cut - Specification":["Long","Extra Long"],"Length to Center of Radius - Metric (Lm)":"-","List Name":"SEP-EL","Low Carbon Steel : 1010; 1018":"-","Magnesium":"-","Medium Carbon Steel : 1035; 1045":"-","Mill Type":"Single End","Neck Diameter - Inch (d1)":"-","Neck Diameter - Metric (d1)":"-","Neck Diameter Max - Inch (d1 Max)":"-","Neck Diameter Max - Metric (d1 Max)":"-","Neck Diameter Min - Inch (d1 Min)":"-","Neck Diameter Min - Metric (d1 Min)":"-","Neck Draft Angle - Degree (ß)":"-","Neck Length - Inch (L1)":"-","Neck Length - Metric (L1)":["8.7","9.4","11.2","16.9","18.1","9.7","11.4","15.2","22.9","26.1"],"Neck Taper Angle - Degree (α)":"-","Nickel Alloy : Inconel":"-","Non-Taper Neck Length - Inch (L2)":"-","Non-Taper Neck Length - Metric (L2)":"-","Notes":"-","Number of Flutes":["2","3"],"Overall Length - Inch (L)":"-","Overall Length - Metric (L)":["45","55","60","50","75"],"PEEK":"-","Peripheral Edge Radius - Metric (R2)":"-","Plunging":"-","Product Overview":"Carbide, 2 & 3-Flute, Square End, DLC, Long Lengths","Radius Tolerance - Inch":"-","Radius Tolerance - Metric":"-","Ramping":"-","Shank Diameter - Inch (d)":"-","Shank Diameter - Metric (d)":["4","6"],"Shank Tolerance":"h6","Short Description":"DLC Coated Carbide End Mill for Super Engineering Plastics","Side Milling":"-","Slotting":"-","Stainless Steels : 17-4PH":"-","Stainless Steels : 300":"-","Stainless Steels : 400":"-","Substrate":"Carbide","Taper Angle Tolerance - Degree":"-","Taper Diameter - Metric (Ds)":"-","Taper per Side - Degree (α)":"-","Tilt Angle - Degree (α/2)":"-","Tip Radius - Metric (R1)":"-","Titanium":"-","Titanium : 6AL4V (30HRC)":"-","Trochoidal Milling":"-","Type":["1","2"],"Type (feature)":"-","Units":"Metric","Wax/PMMA":"-","Web Literature 1":"-","Web Literature 2":"-","Web Literature 3":"-","Web Literature 4":"-","Web Video 1":"-","Web Video 2":"-","Web Video 3":"-","Weldon Flat":"No","Zirconia":"-","View Speed and Feed Page":"Here","View Catalog Page":"Here","Thermo Plastics":"Other; Best","Thermosetting Plastics":"Other; Best","STP Drawing":["Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download"],"DXF Drawing":["Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download"],"CategoryBrand":"EXOCARB","Diameter-Sizes":"0.5mm - 6mm","Flute-Sizes":"-","Neck-Sizes":"8.7mm - 26.1mm","Taper-Sizes":"-","Overall-Sizes":"45mm - 75mm","Shank-Sizes":"4mm - 6mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202430/End_Mills_-_End_Mill_-_EXOCARB_SEP-EL_-_List_2430_-_Catalog_-_DLC-ETL_6X30","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202430/SEP-EL_-_Group_-_002","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202430/SEP-EL_-_Machining_-_001","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202430/SEP-EL_-_Machining_-_002","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202430/SEP-EL_-_Workpiece_-_003"],"Friendly Name":"2430"}

{"Surface Treatment":"DLC-IGUSS","Alloy Steels : 4140; 4340":[],"Aluminum : 6061; 7075":"-","Aluminum : Casting":"-","Aramid Fiber (AFRP)":"-","Benefit 1":"Combines microscopic tool sharpness & tool wear resistance while achieving a good surface finish in a range of plastics from engineering plastics to super engineering plastics.","Benefit 2":"Cutting tool design allows for low cutting forces, reduced heat generation, and burr free machining.","Benefit 3":"High accuracy tooling designed for the demanding needs of the semiconductor industry.","Benefit 4":"Resulting in a sharp cutting edge for free machining in resins.","Bottom Edge Radius - Metric (R2)":"-","Brass, Bronze":"-","Carbon Fiber (CFRP)":"-","Carbon Fiber / Al / Ti / CRES Stack":"-","Carbon Fiber / Aluminum Stack":"-","Carbon Fiber / Titanium Stack":"-","Carbon/Carbon":"-","Cast Iron":"-","Coating Thickness (µm)":"-","Cobalt-Chrome":"-","Compatible Machine":"-","Compression Length - Inch (L2)":"-","Contour Milling":"-","Coolant Thru":"No","Corner Chamfer - Inch (C)":"-","Corner Chamfer - Metric (C)":"-","Corner Radius - Inch (R)":"-","Corner Radius - Metric (R)":"-","Cut Incline Angle - Degree (α)":"-","Cut Incline Angle Tolerance - Degree":"-","Cutting Diameter Tolerance - Inch":["+0 / -0.0006","-0.0002 / -0.0006"],"Cutting Diameter Tolerance - Metric":"-","Cutting Direction":"RH","Cutting Type":"Center Cutting","Deep Side Milling":"-","Diameter - Fractional Size (D)":["1/16","1/8","3/16","1/4"],"Diameter - Inch (D)":["0.0625","0.125","0.1875","0.25"],"Diameter - Metric (D)":"-","Diameter at Center of Radius - Metric (dm)":"-","Die Steels":"-","Edge Radius - Metric (R3)":"-","Effective Diameter - Inch (DCF)":"-","Effective Diameter - Metric (DCF)":"-","Effective Draft Angle - Degree (α)":"-","Effective Neck Length by Incline Angle 0.5° - Inch":"-","Effective Neck Length by Incline Angle 0.5° - Metric":"-","Effective Neck Length by Incline Angle 0° - Inch":"-","Effective Neck Length by Incline Angle 0° - Metric":"-","Effective Neck Length by Incline Angle 1.5° - Inch":"-","Effective Neck Length by Incline Angle 1.5° - Metric":"-","Effective Neck Length by Incline Angle 1° - Inch":"-","Effective Neck Length by Incline Angle 1° - Metric":"-","Effective Neck Length by Incline Angle 2.5° - Metric":"-","Effective Neck Length by Incline Angle 2° - Inch":"-","Effective Neck Length by Incline Angle 2° - Metric":"-","Effective Neck Length by Incline Angle 3° - Inch":"-","Effective Neck Length by Incline Angle 3° - Metric":"-","Effective Radius - Metric (rt)":"-","End Cut Type":"Square End","Feature 1":"DLC-IGUSS Coated","Feature 2":"3 Flute with low helix, Specialized for resins","Feature 3":"Strict dimensional control with tool diameter tolerances of 0.001\" or better ","Feature 4":"Cutting edge ground to a point","Form Tolerance - Metric":"-","Full Description":"OSG's advanced DLC coated carbide end mill, designed for super engineering plastics. This tool is ideal for precise resin machining, ensuring micro-features with high accuracy. \n\nIt boasts a long tool life thanks to the DLC-IGUSS coating, combining exceptional cutting performance with efficient chip evacuation. The sharp cutting edge ensures a smooth machined surface without chatter, while the optimized flute design allows for aggressive cutting parameters. The SEP-EL's three flute configuration for tools larger than 1mm excels in high heat-resistant thermoplastic resin processing, reducing wear on the cutting edge for continuous use. \n\nExperience unmatched efficiency and durability with our DLC coated carbide end mill, your ultimate tool for high-performance resin applications. \n","Glass Ceramics":"-","Glass Fiber (GFRP)":"-","Graphite":"-","Hardened Steels : 35 HRC":"-","Hardened Steels : 35-45 HRC":"-","Hardened Steels : 45-50 HRC":"-","Hardened Steels : 50-70 HRC":"-","Helical Milling":"-","Helix Angle - Degree":"25","Helix Direction":"RH","High Carbon Steel : 1065":"-","Honeycomb: AFRP":"-","Honeycomb: AI/AI":"-","Honeycomb: CFRP/AI":"-","Honeycomb: CFRP/Nomex":"-","Honeycomb: GFRP/Nomex":"-","Hybrid Ceramic / Composite":"-","Included Angle - Degree (α)":"-","Interference Angle - Degree (α)":"-","L/D Ratio":["3","5"],"Length of Cut - Inch (Lc)":["0.1875","0.3125","0.375","0.625","0.5625","0.9375","0.75","1.25"],"Length of Cut - Metric (Lc)":"-","Length of Cut - Specification":["Long","Extra Long"],"Length to Center of Radius - Metric (Lm)":"-","List Name":"SEP-EL","Low Carbon Steel : 1010; 1018":"-","Magnesium":"-","Medium Carbon Steel : 1035; 1045":"-","Mill Type":"Single End","Neck Diameter - Inch (d1)":"-","Neck Diameter - Metric (d1)":"-","Neck Diameter Max - Inch (d1 Max)":"-","Neck Diameter Max - Metric (d1 Max)":"-","Neck Diameter Min - Inch (d1 Min)":"-","Neck Diameter Min - Metric (d1 Min)":"-","Neck Draft Angle - Degree (ß)":"-","Neck Length - Inch (L1)":["0.2","0.32"],"Neck Length - Metric (L1)":"-","Neck Taper Angle - Degree (α)":"-","Nickel Alloy : Inconel":"-","Non-Taper Neck Length - Inch (L2)":"-","Non-Taper Neck Length - Metric (L2)":"-","Notes":"-","Number of Flutes":["2","3"],"Overall Length - Inch (L)":["2","2.5","3"],"Overall Length - Metric (L)":"-","PEEK":"-","Peripheral Edge Radius - Metric (R2)":"-","Plunging":"-","Product Overview":"Carbide, 2 & 3-Flute, Square End, DLC, Long Lengths","Radius Tolerance - Inch":"-","Radius Tolerance - Metric":"-","Ramping":"-","Shank Diameter - Inch (d)":["0.125","0.1875","0.25"],"Shank Diameter - Metric (d)":"-","Shank Tolerance":"h6","Short Description":"DLC Coated Carbide End Mill for Super Engineering Plastics","Side Milling":"-","Slotting":"-","Stainless Steels : 17-4PH":"-","Stainless Steels : 300":"-","Stainless Steels : 400":"-","Substrate":"Carbide","Taper Angle Tolerance - Degree":"-","Taper Diameter - Metric (Ds)":"-","Taper per Side - Degree (α)":"-","Tilt Angle - Degree (α/2)":"-","Tip Radius - Metric (R1)":"-","Titanium":"-","Titanium : 6AL4V (30HRC)":"-","Trochoidal Milling":"-","Type":["1","2"],"Type (feature)":"-","Units":"Inch","Wax/PMMA":"-","Web Literature 1":"-","Web Literature 2":"-","Web Literature 3":"-","Web Literature 4":"-","Web Video 1":"-","Web Video 2":"-","Web Video 3":"-","Weldon Flat":"No","Zirconia":"-","View Speed and Feed Page":"Here","View Catalog Page":"Here","Thermo Plastics":"Other; Best","Thermosetting Plastics":"Other; Best","STP Drawing":["Download","Download","Download","Download","Download","Download","Download","Download"],"DXF Drawing":["Download","Download","Download","Download","Download","Download","Download","Download"],"CategoryBrand":"EXOCARB","Diameter-Sizes":"1/16\" - 0.25\"","Flute-Sizes":"-","Neck-Sizes":"0.2\" - 0.32\"","Taper-Sizes":"-","Overall-Sizes":"2\" - 3\"","Shank-Sizes":"0.125\" - 0.25\"","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202530/End_Mills_-_End_Mill_-_EXOCARB_SEP-EL_-_List_2530_-_Catalog_-_DLC-ETL_6X30","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202530/SEP-EL_-_Group_-_001","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202530/SEP-EL_-_Group_-_002","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202530/SEP-EL_-_Machining_-_001","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202530/SEP-EL_-_Machining_-_002","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202530/SEP-EL_-_Workpiece_-_003"],"Friendly Name":"2530"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FRouters%2FList%202680/Composites_-_Router_-_EXOPRO_AERO-REC_-_List_2680_-_Catalog","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FRouters%2FList%202680/Composites_-_Router_-_EXOPRO_AERO-REC_-_List_2680_-_Extra_2","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FRouters%2FList%202680/Composites_-_Router_-_EXOPRO_AERO-REC_-_List_2680_-_Face","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FRouters%2FList%202680/Composites_-_Router_-_EXOPRO_AERO-REC_-_List_2680_-_Group_1","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FRouters%2FList%202680/Composites_-_Router_-_EXOPRO_AERO-REC_-_List_2680_-_Material_1","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FRouters%2FList%202680/Composites_-_Router_-_EXOPRO_AERO-REC_-_List_2680_-_Material_2"],"Number of Flutes":["4","6","8"],"Cutting Diameter Tolerance - Inch":"+0 / -0.002","Diameter - Inch (D)":["0.25","0.375","0.5","0.234375","0.3125","0.359375","0.4375","0.484375"],"Diameter - Fractional Size (D)":["1/4","3/8","1/2","15/64","5/16","23/64","7/16","31/64"],"Helix Angle - Degree":"15","Shank Diameter - Inch (d)":["0.25","0.375","0.5"],"Length of Cut - Inch (Lc)":["0.75","1.125","1.5","0.5","1","0.9375","1.3125"],"Overall Length - Inch (L)":["2.5","3"],"Benefit 1":"Enables efficient milling with extremely low cutting forces","Benefit 3":"Ensures smoother and sharper cutting edges providing up to 50 times longer tool life","List Name":"AERO-REC","Feature 3":"OSG's patented diamond coating","Web Literature 1":"8002024CA-EM,332|8002024CA-EMT,174","Web Literature 2":"800212CA-V4","Carbon Fiber (CFRP)":"Other; Best","Carbon/Carbon":"Other; Best","Glass Fiber (GFRP)":"Other; Best","Honeycomb: AI/AI":"Other; Good","Honeycomb: CFRP/AI":"Other; Good","Honeycomb: CFRP/Nomex":"Other; Good","Honeycomb: GFRP/Nomex":"Other; Good","Substrate":"Carbide","Units":"Inch","Web Literature 4":"800388CA","Benefit 2":"Increases tool life","Cutting Type":"Center Cutting","Shank Tolerance":"h6","Surface Treatment":"DIAMOND","View Speed and Feed Page":"Here","View Catalog Page":"Here","Weldon Flat":"No","Coolant Thru":"No","Feature 2":"Simplified flute management by changing the milling position at the flute","Mill Type":"Single End","Full Description":"Premium High Performance Routers for Composites (CFRP)","Short Description":"Premium High Performance Routers for Composites (CFRP)","End Cut Type":"Square End","Length of Cut - Specification":["REGULAR","LONG"],"Cutting Direction":"RH","Product Overview":"Rougher, Multiple Flute, OSG CVD Diamond","Feature 1":"Roughing nicks","Type (feature)":"Roughing Router","Diameter-Sizes":"15/64\" - 0.5\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"2.5\" - 3\"","Shank-Sizes":"0.25\" - 0.5\"","Friendly Name":"2680","CategoryBrand":"EXOPRO"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202843/End_Mills_-_Ens_Mill_-_EXOCARB_AERO_DLC-AERO_-_List_2843_-_Catalog","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202843/DLC-CR-ETL_-_002","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202843/DLC-CR-ETL_-_001","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202843/DLC_with_Haimer_Holder_-_007","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202843/DLC-CR-ETL_-_003"],"Overall Length - Inch (L)":["4.5"],"Number of Flutes":"3","Diameter - Fractional Size (D)":["1/2","5/8","3/4","7/8","1"],"Diameter - Inch (D)":["0.5","0.625","0.75","0.875","1"],"Length of Cut - Inch (Lc)":"2.0236","Helix Angle - Degree":"35","Shank Diameter - Inch (d)":["0.5","0.625","0.75","0.875","1"],"Feature 1":"High Rigidity","Benefit 2":"Excellent chip evacuation","Benefit 3":"Excellent Welding Resistance and Lubricity","Benefit 4":"Exceptional Performance in Aluminum Alloy","Full Description":"High Speed Carbide End Mills for Aluminum Alloy","Short Description":"High Speed Carbide End Mills for Aluminum Alloy","Product Overview":"5/8\" to 1\", Corner Radius/Square, DLC Coating, Inch Sizes","Feature 2":"Optimal Flute Shape","List Name":"AERO-ETL","Benefit 1":"Applicable for High Power Equipment","Web Literature 1":"8002024CA-EM,81|8002024CA-EMT,43","Substrate":"Carbide","Units":"Inch","Web Literature 4":"800388CA","Cutting Type":"Center Cutting","Length of Cut - Specification":"LONG","Shank Tolerance":"h6","Surface Treatment":"DLC","Feature 3":"DLC Coating","View Speed and Feed Page":"Here","View Catalog Page":"Here","Weldon Flat":"No","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Mill Type":"Single End","End Cut Type":["Square End","Corner Radius"],"Cutting Direction":"RH","Helix Direction":"RH","Cutting Diameter Tolerance - Inch":"+0 / -0.0008","Feature 4":"Sharp Cutting Edge","Corner Radius - Inch (R)":["0.03","0.06","0.09","0.12","0.15","0.19"],"Diameter-Sizes":"1/2\" - 1\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"4.5\"","Shank-Sizes":"0.5\" - 1\"","Friendly Name":"2843","CategoryBrand":"EXOCARB"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202853/End_Mills_-_End_Mill_-_List_2853_-_EXOCARB_AERO-DLC_-_Extra_Long_Length_-_Catalog","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202853/DLC-CR-ETL_-_002","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202853/DLC_with_Haimer_Holder_-_007","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202853/DLC_-_Part_-_005","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202853/DLC_-_Machine_-_008","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202853/DLC_-_Part_-_001"],"Number of Flutes":"3","Overall Length - Inch (L)":["6.5"],"Shank Diameter - Inch (d)":["0.75"],"Diameter - Inch (D)":["0.75"],"Diameter - Fractional Size (D)":["3/4"],"Helix Angle - Degree":"35","Length of Cut - Inch (Lc)":"4","Feature 1":"High Rigidity","Benefit 2":"Excellent chip evacuation","Benefit 3":"Excellent Welding Resistance and Lubricity","Benefit 4":"Exceptional Performance in Aluminum Alloy","Full Description":"High Speed Carbide End Mills for Aluminum Alloy","Short Description":"High Speed Carbide End Mills for Aluminum Alloy","Feature 2":"Optimal Flute Shape","Length of Cut - Specification":"EXTRA LONG","List Name":"AERO-ETXL","Benefit 1":"Applicable for High Power Equipment","Web Literature 1":"8002024CA-EM,83|8002024CA-EMT,44","Substrate":"Carbide","Units":"Inch","Web Literature 4":"800388CA","Product Overview":"Carbide, DLC Coating, 3 Flute, Extra Long Length, Square and Corner Radius","Cutting Type":"Center Cutting","Shank Tolerance":"h6","Surface Treatment":"DLC","Feature 3":"DLC Coating","View Speed and Feed Page":"Here","View Catalog Page":"Here","Weldon Flat":"No","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Mill Type":"Single End","End Cut Type":["Square End","Corner Radius"],"Cutting Direction":"RH","Helix Direction":"RH","Cutting Diameter Tolerance - Inch":"+0 / -0.0008","Feature 4":"Sharp Cutting Edge","Corner Radius - Inch (R)":["0.03","0.06","0.09","0.12","0.15","0.19"],"Diameter-Sizes":"3/4\" - 0.75\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"6.5\"","Shank-Sizes":"0.75\"","Friendly Name":"2853","CategoryBrand":"EXOCARB"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202873/End_Mills_-_End_Mill_-_EXOCARB_AERO_DLC-AERO_-_List_2873_-_Catalog","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202873/DLC-CR-ETL_-_003","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202873/DLC-CR-ETL_-_001","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202873/DLC-CR-ETL_-_002","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202873/DLC_with_Haimer_Holder_-_007"],"Overall Length - Inch (L)":["4"],"Number of Flutes":"3","Corner Radius - Inch (R)":["0.03","0.06","0.09","0.12","0.19"],"Neck Diameter - Inch (d1)":["0.4606","0.559","0.669","0.787","0.921"],"Neck Length - Inch (L1)":["2.205"],"Diameter - Fractional Size (D)":["1/2","5/8","3/4","7/8","1"],"Diameter - Inch (D)":["0.5","0.625","0.75","0.875","1"],"Helix Angle - Degree":"30","Length of Cut - Inch (Lc)":["0.75","1","1.125","1.3125","1.5"],"Shank Diameter - Inch (d)":["0.5","0.625","0.75","0.875","1"],"Feature 1":"High Rigidity","Benefit 2":"Excellent chip evacuation","Benefit 3":"Excellent Welding Resistance and Lubricity","Benefit 4":"Exceptional Performance in Aluminum Alloy","Full Description":"High Speed Carbide End Mills for Aluminum Alloy","Short Description":"High Speed Carbide End Mills for Aluminum Alloy","Product Overview":"5/8\" to 1\", Corner Radius/Square, DLC Coating, Inch Sizes","Feature 2":"Optimal Flute Shape","List Name":"AERO-ETS","Benefit 1":"Applicable for High Power Equipment","Web Literature 1":"8002024CA-EM,77|8002024CA-EMT,42","Substrate":"Carbide","Units":"Inch","Web Literature 4":"800388CA","Cutting Type":"Center Cutting","Shank Tolerance":"h6","End Cut Type":["Corner Radius","Square End"],"Surface Treatment":"DLC","Feature 3":"DLC Coating","View Speed and Feed Page":"Here","View Catalog Page":"Here","Weldon Flat":"No","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Mill Type":"Single End","Type (feature)":"Reduced Neck","Cutting Direction":"RH","Length of Cut - Specification":"STUB","Helix Direction":"RH","Cutting Diameter Tolerance - Inch":"+0 / -0.0008","Feature 4":"Sharp Cutting Edge","Diameter-Sizes":"1/2\" - 1\"","Flute-Sizes":"-","Neck-Sizes":"2.205\"","Taper-Sizes":"-","Overall-Sizes":"4\"","Shank-Sizes":"0.5\" - 1\"","Friendly Name":"2873","CategoryBrand":"EXOCARB"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202874/End_Mills_-_End_Mill_-_EXOCARB_AERO_DLC-AERO_-_List_2874_-_Catalog","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202874/End_Mills_-_End_Mill_-_List_2874_-_EXOCARB_AERO-DLC_-_Coolant-Through_-_Catalog","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202874/DLC_with_Haimer_Holder_-_007","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202874/DLC-CR-ETL_-_001","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202874/DLC-CR-ETL_-_002","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202874/DLC_-_Machine_-_008","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202874/DLC_-_Background_Image","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202874/DLC_-_Part_-_005","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202874/DLC_-_Part_-_002","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202874/DLC_-_Part_-_004","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202874/DLC_-_Part_-_003","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202874/DLC_-_Part_-_001"],"Overall Length - Inch (L)":["4"],"Number of Flutes":"3","Shank Diameter - Inch (d)":["0.75","0.625","1","0.875"],"Corner Radius - Inch (R)":["0.03","0.06","0.09","0.12","0.19"],"Neck Diameter - Inch (d1)":["0.669","0.559","0.921","0.787"],"Neck Length - Inch (L1)":["2.205"],"Diameter - Inch (D)":["0.75","0.625","1","0.875"],"Diameter - Fractional Size (D)":["3/4","5/8","1","7/8"],"Helix Angle - Degree":"30","Length of Cut - Inch (Lc)":["1.1417","1.0157","1.523","1.3268"],"Feature 1":"High Rigidity","Benefit 2":"Excellent chip evacuation","Benefit 3":"Excellent Welding Resistance and Lubricity","Benefit 4":"Exceptional Performance in Aluminum Alloy","Full Description":"High Speed Carbide End Mills for Aluminum Alloy","Short Description":"High Speed Carbide End Mills for Aluminum Alloy","Product Overview":"5/8\" to 1\", Corner Radius/Square, DLC Coating, Inch Sizes, Coolant Through","Feature 2":"Optimal Flute Shape","List Name":"AERO-O-ETS","Benefit 1":"Applicable for High Power Equipment","Web Literature 1":"8002024CA-EM,79|8002024CA-EMT,42","Substrate":"Carbide","Units":"Inch","Web Literature 4":"800388CA","Shank Tolerance":"h6","End Cut Type":["Corner Radius","Square End"],"Surface Treatment":"DLC","Feature 3":"DLC Coating","View Speed and Feed Page":"Here","View Catalog Page":"Here","Weldon Flat":"No","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Cutting Type":"Non-Center Cutting","Mill Type":"Single End","Coolant Thru":"Yes","Type (feature)":"Reduced Neck","Cutting Direction":"RH","Length of Cut - Specification":"STUB","Helix Direction":"RH","Cutting Diameter Tolerance - Inch":"+0 / -0.0008","Feature 4":"Sharp Cutting Edge","Diameter-Sizes":"5/8\" - 1\"","Flute-Sizes":"-","Neck-Sizes":"2.205\"","Taper-Sizes":"-","Overall-Sizes":"4\"","Shank-Sizes":"0.625\" - 1\"","Friendly Name":"2874","CategoryBrand":"EXOCARB"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202943/End_Mills_-_End_Mill_-_List_2943_-_EXOCARB_AERO-DLC_-_Long_Length_-_Catalog","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202943/DLC-CR-ETL_-_002","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202943/DLC_with_Haimer_Holder_-_007","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202943/DLC_-_Machine_-_008","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202943/DLC_-_Background_Image","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202943/DLC_-_Part_-_005","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202943/DLC_-_Part_-_002","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202943/DLC_-_Part_-_001"],"Number of Flutes":"3","Length of Cut - Metric (Lc)":"50","Overall Length - Metric (L)":["110"],"Shank Diameter - Metric (d)":["12","16","20"],"Cutting Diameter Tolerance - Metric":"+0 / -0.020","Product Overview":"16mm to 25mm, Corner Radius/Square End, DLC Coating, Metric Sizes","Diameter - Metric (D)":["12","16","20"],"Helix Angle - Degree":"35","Feature 1":"High Rigidity","Benefit 2":"Excellent chip evacuation","Benefit 3":"Excellent Welding Resistance and Lubricity","Benefit 4":"Exceptional Performance in Aluminum Alloy","Full Description":"High Speed Carbide End Mills for Aluminum Alloy","Short Description":"High Speed Carbide End Mills for Aluminum Alloy","Web Literature 4":"800388CA","Feature 2":"Optimal Flute Shape","List Name":"AERO-ETL","Benefit 1":"Applicable for High Power Equipment","Web Literature 1":"8002024CA-EM,82|8002024CA-EMT,43","Substrate":"Carbide","Cutting Type":"Center Cutting","Length of Cut - Specification":"LONG","Shank Tolerance":"h6","Surface Treatment":"DLC","Feature 3":"DLC Coating","View Speed and Feed Page":"Here","View Catalog Page":"Here","Units":"Metric","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Weldon Flat":"No","Coolant Thru":"No","Mill Type":"Single End","End Cut Type":["Square End","Corner Radius"],"Cutting Direction":"RH","Helix Direction":"RH","Feature 4":"Sharp Cutting Edge","Corner Radius - Metric (R)":["1","1.6","3","4","5"],"Diameter-Sizes":"12mm - 20mm","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"110mm","Shank-Sizes":"12mm - 20mm","Friendly Name":"2943","CategoryBrand":"EXOCARB"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202953/End_Mills_-_End_Mill_-_List_2953_-_EXOCARB_AERO-DLC_-_Extra_Long_Length_-_Catalog","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202953/DLC-CR-ETL_-_002","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202953/DLC_with_Haimer_Holder_-_007","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202953/DLC_-_Machine_-_008","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202953/DLC_-_Background_Image","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202953/DLC_-_Part_-_001"],"Number of Flutes":"3","Overall Length - Metric (L)":["160"],"Shank Diameter - Metric (d)":["20"],"Cutting Diameter Tolerance - Metric":"+0 / -0.020","Helix Angle - Degree":"35","Diameter - Metric (D)":["20"],"Length of Cut - Metric (Lc)":"100","Feature 1":"High Rigidity","Benefit 2":"Excellent chip evacuation","Benefit 3":"Excellent Welding Resistance and Lubricity","Benefit 4":"Exceptional Performance in Aluminum Alloy","Full Description":"High Speed Carbide End Mills for Aluminum Alloy","Short Description":"High Speed Carbide End Mills for Aluminum Alloy","Web Literature 4":"800388CA","Feature 2":"Optimal Flute Shape","Length of Cut - Specification":"EXTRA LONG","List Name":"AERO-ETXL","Benefit 1":"Applicable for High Power Equipment","Web Literature 1":"8002024CA-EM,84|8002024CA-EMT,44","Substrate":"Carbide","Product Overview":"Carbide, DLC Coating, 3 Flute, Extra Long Length, Square and Corner Radius","Cutting Type":"Center Cutting","Shank Tolerance":"h6","Surface Treatment":"DLC","Feature 3":"DLC Coating","View Speed and Feed Page":"Here","View Catalog Page":"Here","Units":"Metric","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Weldon Flat":"No","Coolant Thru":"No","Mill Type":"Single End","End Cut Type":["Square End","Corner Radius"],"Cutting Direction":"RH","Helix Direction":"RH","Feature 4":"Sharp Cutting Edge","Corner Radius - Metric (R)":["1","1.6","3","4","5"],"Diameter-Sizes":"20mm","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"160mm","Shank-Sizes":"20mm","Friendly Name":"2953","CategoryBrand":"EXOCARB"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202973/End_Mills_-_End_Mill_-_List_2973_-_EXOCARB_AERO-DLC_-_Catalog","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202973/DLC-CR-ETL_-_002","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202973/DLC_with_Haimer_Holder_-_007","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202973/DLC_-_Machine_-_008","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202973/DLC_-_Background_Image","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202973/DLC_-_Part_-_005","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202973/DLC_-_Part_-_002","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202973/DLC_-_Part_-_001"],"Length of Cut - Metric (Lc)":["18","24","30","37.5"],"Number of Flutes":"3","Overall Length - Metric (L)":["100"],"Shank Diameter - Metric (d)":["12","16","20","25"],"Neck Diameter - Metric (d1)":["11","14.4","18","23"],"Cutting Diameter Tolerance - Metric":"+0 / -0.020","Product Overview":"16mm to 25mm, Corner Radius/Square, DLC Coating, Metric Sizes","Neck Length - Metric (L1)":["55"],"Diameter - Metric (D)":["12","16","20","25"],"Helix Angle - Degree":"30","Feature 1":"High Rigidity","Benefit 2":"Excellent chip evacuation","Benefit 3":"Excellent Welding Resistance and Lubricity","Benefit 4":"Exceptional Performance in Aluminum Alloy","Full Description":"High Speed Carbide End Mills for Aluminum Alloy","Short Description":"High Speed Carbide End Mills for Aluminum Alloy","Web Literature 4":"800388CA","Feature 2":"Optimal Flute Shape","List Name":"AERO-ETS","Benefit 1":"Applicable for High Power Equipment","Web Literature 1":"8002024CA-EM,78|8002024CA-EMT,42","Substrate":"Carbide","Cutting Type":"Center Cutting","Shank Tolerance":"h6","Surface Treatment":"DLC","Feature 3":"DLC Coating","View Speed and Feed Page":"Here","View Catalog Page":"Here","Units":"Metric","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Weldon Flat":"No","Coolant Thru":"No","Mill Type":"Single End","Type (feature)":"Reduced Neck","End Cut Type":["Square End","Corner Radius"],"Cutting Direction":"RH","Length of Cut - Specification":"STUB","Helix Direction":"RH","Feature 4":"Sharp Cutting Edge","Corner Radius - Metric (R)":["1","1.6","3","4","5"],"Diameter-Sizes":"12mm - 25mm","Flute-Sizes":"-","Neck-Sizes":"55mm","Taper-Sizes":"-","Overall-Sizes":"100mm","Shank-Sizes":"12mm - 25mm","Friendly Name":"2973","CategoryBrand":"EXOCARB"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202974/End_Mills_-_End_Mill_-_List_2974_-_EXOCARB_AERO-DLC_-_Coolant-Through_-_Catalog","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202974/DLC-CR-ETL_-_002","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202974/DLC_with_Haimer_Holder_-_007","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202974/DLC_-_Machine_-_008","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202974/DLC_-_Background_Image","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202974/DLC_-_Part_-_002","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202974/DLC_-_Part_-_005","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202974/DLC_-_Part_-_001"],"Number of Flutes":"3","Length of Cut - Metric (Lc)":["30","37.5"],"Overall Length - Metric (L)":["100"],"Neck Diameter - Metric (d1)":["18","23"],"Shank Diameter - Metric (d)":["20","25"],"Cutting Diameter Tolerance - Metric":"+0 / -0.020","Product Overview":"16mm to 25mm, Corner Radius/Square, DLC Coating, Metric Sizes, Coolant Through","Neck Length - Metric (L1)":["55"],"Helix Angle - Degree":"30","Diameter - Metric (D)":["20","25"],"Benefit 2":"Excellent chip evacuation","Full Description":"High Speed Carbide End Mills for Aluminum Alloy","Short Description":"High Speed Carbide End Mills for Aluminum Alloy","Web Literature 4":"800388CA","Feature 2":"Optimal Flute Shape","List Name":"AERO-O-ETS","Web Literature 1":"8002024CA-EM,80|8002024CA-EMT,43","Substrate":"Carbide","Shank Tolerance":"h6","Surface Treatment":"DLC","Feature 1":"DLC Coating","View Speed and Feed Page":"Here","View Catalog Page":"Here","Units":"Metric","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Weldon Flat":"No","Cutting Type":"Non-Center Cutting","Coolant Thru":"Yes","Mill Type":"Single End","Benefit 1":"Provides welding resistance and lubricity with optimal performance in aluminum alloys","Benefit 3":"Reduced cutting forces","Type (feature)":"Reduced Neck","End Cut Type":["Square End","Corner Radius"],"Cutting Direction":"RH","Length of Cut - Specification":"STUB","Helix Direction":"RH","Feature 3":"Sharp Cutting Edge","Corner Radius - Metric (R)":["1","1.6","3","4","5"],"Diameter-Sizes":"20mm - 25mm","Flute-Sizes":"-","Neck-Sizes":"55mm","Taper-Sizes":"-","Overall-Sizes":"100mm","Shank-Sizes":"20mm - 25mm","Friendly Name":"2974","CategoryBrand":"EXOCARB"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%203604/End_Mills_-_End_Mill_-_EXOCARB_WXL_-_List_3604_-_Catalog","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%203604/End_Mills_-_End_Mill_-_EXOCARB_WXL_-_List_3604_-_Extra_4","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%203604/End_Mills_-_End_Mill_-_EXOCARB_WXL_-_List_3604_-_Extra_5","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%203604/End_Mills_-_End_Mill_-_EXOCARB_WXL_-_List_3604_-_Extra_6"],"Number of Flutes":"4","Diameter - Inch (D)":["0.0625","0.078125","0.09375","0.109375","0.125","0.15625","0.1875","0.21875","0.25","0.28125","0.3125","0.375","0.4375","0.5","0.625","0.75","1"],"Diameter - Fractional Size (D)":["1/16","5/64","3/32","7/64","1/8","5/32","3/16","7/32","1/4","9/32","5/16","3/8","7/16","1/2","5/8","3/4","1"],"Shank Diameter - Inch (d)":["0.125","0.1875","0.25","0.3125","0.375","0.4375","0.5","0.625","0.75","1"],"Overall Length - Inch (L)":["1.5","2","2.5","2.75","3","3.5","4"],"Length of Cut - Inch (Lc)":["0.1875","0.25","0.375","0.5","0.5625","0.625","0.75","0.8125","1","1.25","1.5"],"Helix Angle - Degree":"30","Web Literature 4":"800388CA","Product Overview":"4 Flute, Regular Length, WXL","Feature 2":"High Precision geometry","Feature 3":"High strength core diameter","Benefit 4":"Higher coating oxidation temp & hardness dramatically improve wear resistance.","Web Video 1":"https://youtu.be/dNdGq78-DvA","Hardened Steels : 35 HRC":"H; Best","Web Literature 1":"8002024CA-EM,68|8002024CA-EMT,34","Web Literature 2":"800304CA","Hardened Steels : 35-45 HRC":"H; Best","Alloy Steels : 4140; 4340":"P; Best","Units":"Inch","Substrate":"Carbide","Web Literature 3":"800366CA|800365CA","Die Steels":"P; Best","Cast Iron":"K; Best","High Carbon Steel : 1065":"P; Best","Cutting Type":"Center Cutting","Low Carbon Steel : 1010; 1018":"P; Best","Hardened Steels : 45-50 HRC":"H; Good","Medium Carbon Steel : 1035; 1045":"P; Best","Stainless Steels : 17-4PH":"M; Best","Shank Tolerance":"h6","Stainless Steels : 300":"M; Best","Benefit 2":"High accuracy all but eliminates need for benching and rework for mold makers.","Stainless Steels : 400":"M; Best","View Speed and Feed Page":"Here","View Catalog Page":"Here","Aluminum : Casting":"N; Good","Weldon Flat":"No","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Good","Mill Type":"Single End","Full Description":"Premium High Performance Carbide End Mills for Pre-hardened & Hardened Steels","Short Description":"Premium High Performance Carbide End Mills for Pre-hardened & Hardened Steels","End Cut Type":"Square End","Length of Cut - Specification":["REGULAR","LONG","STUB"],"Cutting Direction":"RH","Benefit 1":"The hardest most wear resistant carbide possible for incredible wear resistance.","Helix Direction":"RH","Benefit 3":"Tools utilize thicker core diameters for the ultimate in strength and rigidity.","Cutting Diameter Tolerance - Inch":"+0 / -0.0008","Feature 1":"Ultra-fine micrograin carbide","Nickel Alloy : Inconel":"S; Good","Surface Treatment":"WXL","Feature 4":"WXL coating - +1100 Celsius Oxidation Temp. & +3100Hv in hardness","List Name":"WXL-EMS","Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"1/16\" - 1\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"1.5\" - 4\"","Shank-Sizes":"0.125\" - 1\"","Friendly Name":"3604","CategoryBrand":"EXOCARB"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%203619/End_Mills_-_End_Mill_-_EXOCARB_WXL_-_List_3619_-_Catalog"],"Number of Flutes":"2","Diameter - Inch (D)":["0.0625","0.078125","0.09375","0.109375","0.125","0.15625","0.1875","0.25","0.3125","0.375","0.4375","0.5"],"Diameter - Fractional Size (D)":["1/16","5/64","3/32","7/64","1/8","5/32","3/16","1/4","5/16","3/8","7/16","1/2"],"Shank Diameter - Inch (d)":["0.125","0.1875","0.25","0.3125","0.375","0.4375","0.5"],"Product Overview":"2 Flute, Stub Length, WXL","Length of Cut - Inch (Lc)":["0.09375","0.125","0.140625","0.171875","0.1875","0.234375","0.28125","0.375","0.46875","0.5625","0.65625","0.75"],"Overall Length - Inch (L)":["2","2.5","2.75","3"],"Helix Angle - Degree":"30","Web Literature 4":"800388CA","Feature 2":"High Precision geometry","Feature 3":"High strength core diameter","Benefit 4":"Higher coating oxidation temp & hardness dramatically improve wear resistance.","Web Video 1":"https://youtu.be/dNdGq78-DvA","Hardened Steels : 35 HRC":"H; Best","Web Literature 1":"8002024CA-EM,59|8002024CA-EMT,20","Hardened Steels : 35-45 HRC":"H; Best","Alloy Steels : 4140; 4340":"P; Best","Units":"Inch","Substrate":"Carbide","Web Literature 3":"800366CA|800365CA","Hardened Steels : 45-50 HRC":"H; Best","Die Steels":"P; Best","Cast Iron":"K; Best","High Carbon Steel : 1065":"P; Best","Cutting Type":"Center Cutting","Low Carbon Steel : 1010; 1018":"P; Best","Hardened Steels : 50-70 HRC":"H; Good","Medium Carbon Steel : 1035; 1045":"P; Best","Stainless Steels : 17-4PH":"M; Best","Shank Tolerance":"h6","Stainless Steels : 300":"M; Best","Benefit 2":"High accuracy all but eliminates need for benching and rework for mold makers.","Stainless Steels : 400":"M; Best","View Speed and Feed Page":"Here","View Catalog Page":"Here","Aluminum : Casting":"N; Good","Weldon Flat":"No","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Good","Mill Type":"Single End","Full Description":"Premium High Performance Carbide End Mills for Pre-hardened & Hardened Steels","Short Description":"Premium High Performance Carbide End Mills for Pre-hardened & Hardened Steels","End Cut Type":"Square End","Cutting Direction":"RH","Length of Cut - Specification":"STUB","Benefit 1":"The hardest ost wear resistant carbide possible for incredible wear resistance.","Helix Direction":"RH","Benefit 3":"Tools utilize thicker core diameters for the ultimate in strength and rigidity.","Cutting Diameter Tolerance - Inch":["+0 / -0.0008","+0 / -0.0012"],"Feature 1":"Ultra-fine micrograin carbide","Nickel Alloy : Inconel":"S; Good","Surface Treatment":"WXL","Feature 4":"WXL coating - +1100 Celsius Oxidation Temp. & +3100Hv in hardness","List Name":"WXL-1.5D-DE","Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"1/16\" - 0.5\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"2\" - 3\"","Shank-Sizes":"0.125\" - 0.5\"","Friendly Name":"3619","CategoryBrand":"EXOCARB"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%203620/List_3620","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%203620/End_Mills_-_End_Mill_-_EXOCARB_WXL_-_List_3620_-_Catalog"],"Number of Flutes":"2","Diameter - Inch (D)":["0.0625","0.078125","0.09375","0.109375","0.125","0.15625","0.1875","0.21875","0.25","0.28125","0.3125","0.375","0.4375","0.5","0.625","0.75"],"Diameter - Fractional Size (D)":["1/16","5/64","3/32","7/64","1/8","5/32","3/16","7/32","1/4","9/32","5/16","3/8","7/16","1/2","5/8","3/4"],"Shank Diameter - Inch (d)":["0.125","0.1875","0.25","0.3125","0.375","0.4375","0.5","0.625","0.75"],"Product Overview":"2 Flute, Stub Length, WXL","Length of Cut - Inch (Lc)":["0.125","0.15625","0.1875","0.21875","0.25","0.3125","0.375","0.4375","0.5","0.5625","0.625","0.75","0.875","1","1.25","1.5"],"Overall Length - Inch (L)":["2","2.5","2.75","3","3.5","4"],"Helix Angle - Degree":"30","Web Literature 4":"800388CA","Feature 2":"High Precision geometry","Feature 3":"High strength core diameter","Benefit 4":"Higher coating oxidation temp & hardness dramatically improve wear resistance.","Web Video 1":"https://youtu.be/dNdGq78-DvA","Hardened Steels : 35 HRC":"H; Best","Web Literature 1":"8002024CA-EM,61|8002024CA-EMT,23","Web Literature 2":"800304CA","Hardened Steels : 35-45 HRC":"H; Best","Alloy Steels : 4140; 4340":"P; Best","Units":"Inch","Substrate":"Carbide","Web Literature 3":"800366CA|800365CA","Hardened Steels : 45-50 HRC":"H; Best","Die Steels":"P; Best","Cast Iron":"K; Best","High Carbon Steel : 1065":"P; Best","Cutting Type":"Center Cutting","Low Carbon Steel : 1010; 1018":"P; Best","Hardened Steels : 50-70 HRC":"H; Good","Medium Carbon Steel : 1035; 1045":"P; Best","Stainless Steels : 17-4PH":"M; Best","Shank Tolerance":"h6","Stainless Steels : 300":"M; Best","Benefit 2":"High accuracy all but eliminates need for benching and rework for mold makers.","Stainless Steels : 400":"M; Best","View Speed and Feed Page":"Here","View Catalog Page":"Here","Aluminum : Casting":"N; Good","Weldon Flat":"No","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Good","Mill Type":"Single End","Full Description":"Premium High Performance Carbide End Mills for Pre-hardened & Hardened Steels","Short Description":"Premium High Performance Carbide End Mills for Pre-hardened & Hardened Steels","End Cut Type":"Square End","Length of Cut - Specification":"REGULAR","Cutting Direction":"RH","Benefit 1":"The hardest ost wear resistant carbide possible for incredible wear resistance.","Helix Direction":"RH","Benefit 3":"Tools utilize thicker core diameters for the ultimate in strength and rigidity.","Cutting Diameter Tolerance - Inch":["+0 / -0.0008","+0 / -0.0012"],"Feature 1":"Ultra-fine micrograin carbide","Nickel Alloy : Inconel":"S; Good","Surface Treatment":"WXL","Feature 4":"WXL coating - +1100 Celsius Oxidation Temp. & +3100Hv in hardness","List Name":"WXL-2D-DE","Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"1/16\" - 0.75\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"2\" - 4\"","Shank-Sizes":"0.125\" - 0.75\"","Friendly Name":"3620","CategoryBrand":"EXOCARB"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%203621/End_Mills_-_End_Mill_-_EXOCARB_WXL_-_List_3621_-_Catalog"],"Number of Flutes":"2","Diameter - Inch (D)":["0.0625","0.078125","0.09375","0.109375","0.125","0.15625","0.1875","0.21875","0.25","0.28125","0.3125","0.375","0.4375","0.5","0.625","0.75"],"Diameter - Fractional Size (D)":["1/16","5/64","3/32","7/64","1/8","5/32","3/16","7/32","1/4","9/32","5/16","3/8","7/16","1/2","5/8","3/4"],"Shank Diameter - Inch (d)":["0.125","0.1875","0.25","0.3125","0.375","0.4375","0.5","0.625","0.75"],"Product Overview":"2 Flute, Regular Length, WXL","Length of Cut - Inch (Lc)":["0.1875","0.234375","0.28125","0.328125","0.375","0.46875","0.5625","0.65625","0.75","0.84375","0.9375","1.125","1.3125","1.5","1.875","2.25"],"Overall Length - Inch (L)":["2","2.25","2.5","2.75","3","3.25","3.5","4.25","5"],"Helix Angle - Degree":"35","Web Literature 4":"800388CA","Feature 2":"High Precision geometry","Feature 3":"High strength core diameter","Benefit 4":"Higher coating oxidation temp & hardness dramatically improve wear resistance.","Web Video 1":"https://youtu.be/dNdGq78-DvA","Hardened Steels : 35 HRC":"H; Best","Web Literature 1":"8002024CA-EM,63|8002024CA-EMT,23","Web Literature 2":"800304CA","Hardened Steels : 35-45 HRC":"H; Best","Alloy Steels : 4140; 4340":"P; Best","Units":"Inch","Substrate":"Carbide","Web Literature 3":"800366CA|800365CA","Hardened Steels : 45-50 HRC":"H; Best","Die Steels":"P; Best","Cast Iron":"K; Best","High Carbon Steel : 1065":"P; Best","Cutting Type":"Center Cutting","Low Carbon Steel : 1010; 1018":"P; Best","Hardened Steels : 50-70 HRC":"H; Good","Medium Carbon Steel : 1035; 1045":"P; Best","Stainless Steels : 17-4PH":"M; Best","Shank Tolerance":"h6","Stainless Steels : 300":"M; Best","Benefit 2":"High accuracy all but eliminates need for benching and rework for mold makers.","Stainless Steels : 400":"M; Best","View Speed and Feed Page":"Here","View Catalog Page":"Here","Aluminum : Casting":"N; Good","Weldon Flat":"No","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Good","Mill Type":"Single End","Full Description":"Premium High Performance Carbide End Mills for Pre-hardened & Hardened Steels","Short Description":"Premium High Performance Carbide End Mills for Pre-hardened & Hardened Steels","End Cut Type":"Square End","Length of Cut - Specification":"REGULAR","Cutting Direction":"RH","Benefit 1":"The hardest ost wear resistant carbide possible for incredible wear resistance.","Helix Direction":"RH","Benefit 3":"Tools utilize thicker core diameters for the ultimate in strength and rigidity.","Cutting Diameter Tolerance - Inch":["+0 / -0.0008","+0 / -0.0012"],"Feature 1":"Ultra-fine micrograin carbide","Nickel Alloy : Inconel":"S; Good","Surface Treatment":"WXL","Feature 4":"WXL coating - +1100 Celsius Oxidation Temp. & +3100Hv in hardness","List Name":"WXL-3D-DE","Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"1/16\" - 0.75\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"2\" - 5\"","Shank-Sizes":"0.125\" - 0.75\"","Friendly Name":"3621","CategoryBrand":"EXOCARB"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%203642/End_Mills_-_End_Mill_-_EXOCARB_WXL_-_List_3642_-_WXL-EML_-_Catalog"],"Number of Flutes":"4","Diameter - Inch (D)":["0.0625","0.078125","0.09375","0.109375","0.125","0.15625","0.1875","0.21875","0.25","0.3125","0.375","0.5","0.625"],"Diameter - Fractional Size (D)":["1/16","5/64","3/32","7/64","1/8","5/32","3/16","7/32","1/4","5/16","3/8","1/2","5/8"],"Shank Diameter - Inch (d)":["0.125","0.1875","0.25","0.3125","0.375","0.5","0.625"],"Overall Length - Inch (L)":["1.5","2","2.5","3","4","5"],"Length of Cut - Inch (Lc)":["0.25","0.3125","0.5","0.625","0.6875","0.75","0.875","1","1.125","1.375","1.625","2"],"Helix Angle - Degree":"30","Web Literature 4":"800388CA","Product Overview":"4 Flute, Long Length, WXL","Feature 2":"High Precision geometry","Feature 3":"High strength core diameter","Benefit 4":"Higher coating oxidation temp & hardness dramatically improve wear resistance.","Web Video 1":"https://youtu.be/dNdGq78-DvA","Hardened Steels : 35 HRC":"H; Best","Web Literature 1":"8002024CA-EM,71|8002024CA-EMT,38","Hardened Steels : 35-45 HRC":"H; Best","Web Literature 2":"800355CA","Alloy Steels : 4140; 4340":"P; Best","Units":"Inch","Substrate":"Carbide","Web Literature 3":"800366CA|800365CA","Die Steels":"P; Best","Cast Iron":"K; Best","High Carbon Steel : 1065":"P; Best","Cutting Type":"Center Cutting","Low Carbon Steel : 1010; 1018":"P; Best","Hardened Steels : 45-50 HRC":"H; Good","Length of Cut - Specification":["LONG","EXTRA LONG"],"Medium Carbon Steel : 1035; 1045":"P; Best","Stainless Steels : 17-4PH":"M; Best","Shank Tolerance":"h6","Stainless Steels : 300":"M; Best","Benefit 2":"High accuracy all but eliminates need for benching and rework for mold makers.","Stainless Steels : 400":"M; Best","View Speed and Feed Page":"Here","View Catalog Page":"Here","Aluminum : Casting":"N; Good","Weldon Flat":"No","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Good","Mill Type":"Single End","Full Description":"Premium High Performance Carbide End Mills for Pre-hardened & Hardened Steels","Short Description":"Premium High Performance Carbide End Mills for Pre-hardened & Hardened Steels","End Cut Type":"Square End","Cutting Direction":"RH","Benefit 1":"The hardest most wear resistant carbide possible for incredible wear resistance.","Helix Direction":"RH","Benefit 3":"Tools utilize thicker core diameters for the ultimate in strength and rigidity.","Cutting Diameter Tolerance - Inch":["+0 / -0.0008","+0 / -0.0012"],"Feature 1":"Ultra-fine micrograin carbide","Nickel Alloy : Inconel":"S; Good","Surface Treatment":"WXL","Feature 4":"WXL coating - +1100 Celsius Oxidation Temp. & +3100Hv in hardness","List Name":"WXL-EML","Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"1/16\" - 0.625\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"1.5\" - 5\"","Shank-Sizes":"0.125\" - 0.625\"","Friendly Name":"3642","CategoryBrand":"EXOCARB"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%203704/End_Mills_-_End_Mill_-_EXOCARB_WXL_-_List_3704_-_Catalog"],"Length of Cut - Metric (Lc)":["2.5","4","6","8","10","11","13","16","19","22","26"],"Number of Flutes":"4","Overall Length - Metric (L)":["40","45","50","60","70","75"],"Shank Diameter - Metric (d)":["4","6","8","10","12"],"Cutting Diameter Tolerance - Metric":"+0 / -0.020","Diameter - Metric (D)":["1","1.5","2","2.5","3","3.5","4","4.5","5","6","7","8","9","10","12"],"Helix Angle - Degree":"30","Web Literature 4":"800388CA","Feature 2":"High Precision geometry","Product Overview":"4 Flute, Stub Length, WXL","Feature 3":"High strength core diameter","Benefit 4":"Higher coating oxidation temp & hardness dramatically improve wear resistance.","Web Video 1":"https://youtu.be/dNdGq78-DvA","Hardened Steels : 35 HRC":"H; Best","Web Literature 1":"8002024CA-EM,69|8002024CA-EMT,35","Web Literature 2":"800304CA","Hardened Steels : 35-45 HRC":"H; Best","Alloy Steels : 4140; 4340":"P; Best","Substrate":"Carbide","Web Literature 3":"800366CA|800365CA","Die Steels":"P; Best","Cast Iron":"K; Best","High Carbon Steel : 1065":"P; Best","Cutting Type":"Center Cutting","Low Carbon Steel : 1010; 1018":"P; Best","Hardened Steels : 45-50 HRC":"H; Good","Medium Carbon Steel : 1035; 1045":"P; Best","Stainless Steels : 17-4PH":"M; Best","Shank Tolerance":"h6","Stainless Steels : 300":"M; Best","Benefit 2":"High accuracy all but eliminates need for benching and rework for mold makers.","Stainless Steels : 400":"M; Best","View Speed and Feed Page":"Here","View Catalog Page":"Here","Aluminum : Casting":"N; Good","Units":"Metric","Weldon Flat":"No","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Good","Mill Type":"Single End","Full Description":"Premium High Performance Carbide End Mills for Pre-hardened & Hardened Steels","Short Description":"Premium High Performance Carbide End Mills for Pre-hardened & Hardened Steels","End Cut Type":"Square End","Length of Cut - Specification":["REGULAR","LONG"],"Cutting Direction":"RH","Benefit 1":"The hardest ost wear resistant carbide possible for incredible wear resistance.","Helix Direction":"RH","Benefit 3":"Tools utilize thicker core diameters for the ultimate in strength and rigidity.","Feature 1":"Ultra-fine micrograin carbide","Nickel Alloy : Inconel":"S; Good","Surface Treatment":"WXL","Feature 4":"WXL coating - +1100 Celsius Oxidation Temp. & +3100Hv in hardness","Titanium : 6AL4V (30HRC)":"S; Good","List Name":"WXL-EMS","Diameter-Sizes":"1mm - 12mm","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"40mm - 75mm","Shank-Sizes":"4mm - 12mm","Friendly Name":"3704","CategoryBrand":"EXOCARB"}

{"Number of Flutes":"2","Overall Length - Metric (L)":["45","50"],"Shank Diameter - Metric (d)":["4","6"],"Cutting Diameter Tolerance - Metric":"+0 / -0.020","Product Overview":"2 Flute, Stub Length, WXL","Diameter - Metric (D)":["0.1","0.2","0.3","0.4","0.5","0.6","0.7","0.8","0.9","1","1.1","1.2","1.3","1.4","1.5","1.6","1.7","1.8","1.9","2","2.1","2.2","2.3","2.4","2.5","2.6","2.7","2.8","2.9","3","3.1","3.2","3.3","3.4","3.5","3.6","3.7","3.8","3.9","4","4.1","4.2","4.3","4.4","4.5","4.6","4.7","4.8","4.9","5","5.1","5.2","5.3","5.4","5.5","5.6","5.7","5.8","5.9","5.999999"],"Helix Angle - Degree":"30","Length of Cut - Metric (Lc)":["0.15","0.3","0.45","0.6","0.75","0.9","1.1","1.2","1.4","1.5","1.7","1.8","2","2.1","2.3","2.4","2.6","2.7","2.9","3","3.2","3.3","3.5","3.6","3.8","3.9","4.1","4.2","4.4","4.5","4.7","4.8","5","5.1","5.3","5.4","5.6","5.7","5.9","6","6.2","6.3","6.5","6.6","6.8","6.9","7.1","7.2","7.4","7.5","7.7","7.8","8","8.1","8.3","8.4","8.6","8.7","8.9","9"],"Web Literature 4":"800388CA","Feature 2":"High Precision geometry","Feature 3":"High strength core diameter","Benefit 4":"Higher coating oxidation temp & hardness dramatically improve wear resistance.","Web Video 1":["https://youtu.be/dNdGq78-DvA"],"Hardened Steels : 35 HRC":"H; Best","Web Literature 1":"8002024CA-EM,60|8002024CA-EMT,21","Web Literature 2":"800304CA","Hardened Steels : 35-45 HRC":"H; Best","Alloy Steels : 4140; 4340":"P; Best","Substrate":"Carbide","Web Literature 3":"800366CA|800365CA","Hardened Steels : 45-50 HRC":"H; Best","Die Steels":"P; Best","Cast Iron":"K; Best","High Carbon Steel : 1065":"P; Best","Cutting Type":"Center Cutting","Low Carbon Steel : 1010; 1018":"P; Best","Hardened Steels : 50-70 HRC":"H; Good","Medium Carbon Steel : 1035; 1045":"P; Best","Stainless Steels : 17-4PH":"M; Best","Shank Tolerance":"h6","Stainless Steels : 300":"M; Best","Benefit 2":"High accuracy all but eliminates need for benching and rework for mold makers.","Stainless Steels : 400":"M; Best","View Speed and Feed Page":"Here","View Catalog Page":"Here","Aluminum : Casting":"N; Good","Units":"Metric","Weldon Flat":"No","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Good","Mill Type":"Single End","Full Description":"Premium High Performance Carbide End Mills for Pre-hardened & Hardened Steels","Short Description":"Premium High Performance Carbide End Mills for Pre-hardened & Hardened Steels","End Cut Type":"Square End","Cutting Direction":"RH","Length of Cut - Specification":"STUB","Benefit 1":"The hardest ost wear resistant carbide possible for incredible wear resistance.","Helix Direction":"RH","Benefit 3":"Tools utilize thicker core diameters for the ultimate in strength and rigidity.","Feature 1":"Ultra-fine micrograin carbide","Nickel Alloy : Inconel":"S; Good","Surface Treatment":"WXL","Feature 4":"WXL coating - +1100 Celsius Oxidation Temp. & +3100Hv in hardness","List Name":"WXL-1.5D-DE","Titanium : 6AL4V (30HRC)":"S; Good","STP Drawing":["Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download"],"DXF Drawing":["Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download"],"Catalog Page Number(s)":"855","CategoryBrand":"EXOCARB","Diameter-Sizes":"0.1mm - 5.999999mm","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"45mm - 50mm","Shank-Sizes":"4mm - 6mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%203720/End_Mills_-_End_Mill_-_EXOCARB_WXL_-_List_3720_-_Catalog"],"Friendly Name":"3720"}

{"Number of Flutes":"2","Overall Length - Metric (L)":["45","50","60","70","75","90","100"],"Shank Diameter - Metric (d)":["4","6","8","10","12","16","20"],"Cutting Diameter Tolerance - Metric":["+0 / -0.020","+0 / -0.030"],"Product Overview":"2 Flute, Regular Length, WXL","Diameter - Metric (D)":["0.1","0.2","0.3","0.4","0.5","0.6","0.7","0.8","0.9","1","1.1","1.2","1.3","1.4","1.5","1.6","1.7","1.8","1.9","2","2.1","2.2","2.3","2.4","2.5","2.6","2.7","2.8","2.9","3","3.1","3.2","3.3","3.4","3.5","3.6","3.7","3.8","3.9","4","4.1","4.2","4.3","4.4","4.5","4.6","4.7","4.8","4.9","5","5.1","5.2","5.3","5.4","5.5","5.6","5.7","5.8","5.9","5.999999","6.5","7","7.5","8","8.5","9","9.5","10","11","12","16","18","20"],"Helix Angle - Degree":"30","Length of Cut - Metric (Lc)":["0.2","0.4","0.6","0.8","1","1.2","1.4","1.6","1.8","2","2.2","2.4","2.6","2.8","3","3.2","3.4","3.6","3.8","4","4.2","4.4","4.6","4.8","5","5.2","5.4","5.6","5.8","6","6.2","6.4","6.6","6.8","7","7.2","7.4","7.6","7.8","8","8.2","8.4","8.6","8.8","9","9.2","9.4","9.6","9.8","10","10.2","10.4","10.6","10.8","11","11.2","11.4","11.6","11.8","12","13","14","15","16","17","18","19","20","22","24","32","36","40"],"Web Literature 4":"800388CA","Feature 2":"High Precision geometry","Feature 3":"High strength core diameter","Benefit 4":"Higher coating oxidation temp & hardness dramatically improve wear resistance.","Web Video 1":["https://youtu.be/dNdGq78-DvA"],"Hardened Steels : 35 HRC":"H; Best","Web Literature 1":"8002024CA-EM,62|8002024CA-EMT,24","Web Literature 2":"800304CA","Hardened Steels : 35-45 HRC":"H; Best","Alloy Steels : 4140; 4340":"P; Best","Substrate":"Carbide","Web Literature 3":"800366CA|800365CA","Hardened Steels : 45-50 HRC":"H; Best","Die Steels":"P; Best","Cast Iron":"K; Best","High Carbon Steel : 1065":"P; Best","Cutting Type":"Center Cutting","Low Carbon Steel : 1010; 1018":"P; Best","Hardened Steels : 50-70 HRC":"H; Good","Medium Carbon Steel : 1035; 1045":"P; Best","Stainless Steels : 17-4PH":"M; Best","Shank Tolerance":"h6","Stainless Steels : 300":"M; Best","Benefit 2":"High accuracy all but eliminates need for benching and rework for mold makers.","Stainless Steels : 400":"M; Best","View Speed and Feed Page":"Here","View Catalog Page":"Here","Aluminum : Casting":"N; Good","Units":"Metric","Weldon Flat":"No","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Good","Mill Type":"Single End","Full Description":"Premium High Performance Carbide End Mills for Pre-hardened & Hardened Steels","Short Description":"Premium High Performance Carbide End Mills for Pre-hardened & Hardened Steels","End Cut Type":"Square End","Length of Cut - Specification":"REGULAR","Cutting Direction":"RH","Benefit 1":"The hardest ost wear resistant carbide possible for incredible wear resistance.","Helix Direction":"RH","Benefit 3":"Tools utilize thicker core diameters for the ultimate in strength and rigidity.","Feature 1":"Ultra-fine micrograin carbide","Nickel Alloy : Inconel":"S; Good","Surface Treatment":"WXL","Feature 4":"WXL coating - +1100 Celsius Oxidation Temp. & +3100Hv in hardness","List Name":"WXL-2D-DE","Titanium : 6AL4V (30HRC)":"S; Good","STP Drawing":["Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download"],"DXF Drawing":["Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download"],"Catalog Page Number(s)":"857","CategoryBrand":"EXOCARB","Diameter-Sizes":"0.1mm - 20mm","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"45mm - 100mm","Shank-Sizes":"4mm - 20mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%203721/End_Mills_-_End_Mill_-_EXOCARB_WXL_-_List_3721_-_Catalog"],"Friendly Name":"3721"}

{"Number of Flutes":"2","Overall Length - Metric (L)":["45","50","55","60","65","70","75","80","90","110","130"],"Shank Diameter - Metric (d)":["4","6","8","10","12","16","20"],"Cutting Diameter Tolerance - Metric":["+0 / -0.020","+0 / -0.030"],"Product Overview":"2 Flute, Regular Length, WXL","Diameter - Metric (D)":["0.1","0.2","0.3","0.4","0.5","0.6","0.7","0.8","0.9","1","1.1","1.2","1.3","1.4","1.5","1.6","1.7","1.8","1.9","2","2.1","2.2","2.3","2.4","2.5","2.6","2.7","2.8","2.9","3","3.1","3.2","3.3","3.4","3.5","3.6","3.7","3.8","3.9","4","4.1","4.2","4.3","4.4","4.5","4.6","4.7","4.8","4.9","5","5.1","5.2","5.3","5.4","5.5","5.6","5.7","5.8","5.9","6","6.5","7","7.5","8","8.5","9","9.5","10","11","12","16","18","20"],"Helix Angle - Degree":"35","Length of Cut - Metric (Lc)":["0.3","0.6","0.9","1.2","1.5","1.8","2.1","2.4","2.7","3","3.3","3.6","3.9","4.2","4.5","4.8","5.1","5.4","5.7","6","6.3","6.6","6.9","7.2","7.5","7.8","8.1","8.4","8.7","9","9.3","9.6","9.9","10.2","10.5","10.8","11.1","11.4","11.7","12","12.3","12.6","12.9","13.2","13.5","13.8","14.1","14.4","14.7","15","15.3","15.6","15.9","16.2","16.5","16.8","17.1","17.4","17.7","18","19.5","21","22.5","24","27","28.5","30","33","36","48","54","60"],"Web Literature 4":"800388CA","Feature 2":"High Precision geometry","Feature 3":"High strength core diameter","Benefit 4":"Higher coating oxidation temp & hardness dramatically improve wear resistance.","Web Video 1":["https://youtu.be/dNdGq78-DvA"],"Hardened Steels : 35 HRC":"H; Best","Web Literature 1":"8002024CA-EM,64|8002024CA-EMT,26","Web Literature 2":"800304CA","Hardened Steels : 35-45 HRC":"H; Best","Alloy Steels : 4140; 4340":"P; Best","Substrate":"Carbide","Web Literature 3":"800366CA|800365CA","Hardened Steels : 45-50 HRC":"H; Best","Die Steels":"P; Best","Cast Iron":"K; Best","High Carbon Steel : 1065":"P; Best","Cutting Type":"Center Cutting","Low Carbon Steel : 1010; 1018":"P; Best","Hardened Steels : 50-70 HRC":"H; Good","Medium Carbon Steel : 1035; 1045":"P; Best","Stainless Steels : 17-4PH":"M; Best","Shank Tolerance":"h6","Stainless Steels : 300":"M; Best","Benefit 2":"High accuracy all but eliminates need for benching and rework for mold makers.","Stainless Steels : 400":"M; Best","View Speed and Feed Page":"Here","View Catalog Page":"Here","Aluminum : Casting":"N; Good","Units":"Metric","Weldon Flat":"No","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Good","Mill Type":"Single End","Full Description":"Premium High Performance Carbide End Mills for Pre-hardened & Hardened Steels","Short Description":"Premium High Performance Carbide End Mills for Pre-hardened & Hardened Steels","End Cut Type":"Square End","Length of Cut - Specification":"REGULAR","Cutting Direction":"RH","Benefit 1":"The hardest ost wear resistant carbide possible for incredible wear resistance.","Helix Direction":"RH","Benefit 3":"Tools utilize thicker core diameters for the ultimate in strength and rigidity.","Feature 1":"Ultra-fine micrograin carbide","Nickel Alloy : Inconel":"S; Good","Surface Treatment":"WXL","Feature 4":"WXL coating - +1100 Celsius Oxidation Temp. & +3100Hv in hardness","List Name":"WXL-3D-DE","Titanium : 6AL4V (30HRC)":"S; Good","STP Drawing":["Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download"],"DXF Drawing":["Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download"],"Catalog Page Number(s)":"859","CategoryBrand":"EXOCARB","Diameter-Sizes":"0.1mm - 20mm","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"45mm - 130mm","Shank-Sizes":"4mm - 20mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%203722/End_Mills_-_End_Mill_-_EXOCARB_WXL_-_List_3722_-_Catalog"],"Friendly Name":"3722"}

{"Number of Flutes":"2","Overall Length - Metric (L)":["45","50","55","60","65","80","90","100"],"Shank Diameter - Metric (d)":["4","6","8","10","12"],"Cutting Diameter Tolerance - Metric":"+0 / -0.020","Product Overview":"2 Flute, Long Length, WXL","Diameter - Metric (D)":["0.2","0.3","0.4","0.5","0.6","0.7","0.8","0.9","1","1.1","1.2","1.3","1.4","1.5","1.6","1.7","1.8","1.9","2","2.1","2.2","2.3","2.4","2.5","2.6","2.7","2.8","2.9","3","3.1","3.2","3.3","3.4","3.5","3.6","3.7","3.8","3.9","4","4.1","4.2","4.3","4.4","4.5","4.6","4.7","4.8","4.9","5","5.1","5.2","5.3","5.4","5.5","5.6","5.7","5.8","5.9","6","8","10","12"],"Length of Cut - Metric (Lc)":["0.8","1.2","1.6","2","2.4","2.8","3.2","3.6","4","4.4","4.8","5.2","5.6","6","6.4","6.8","7.2","7.6","8","8.4","8.8","9.2","9.6","10","10.4","10.8","11.2","11.6","12","12.4","12.8","13.2","13.6","14","14.4","14.8","15.2","15.6","16","16.4","16.8","17.2","17.6","18","18.4","18.8","19.2","19.6","20","20.4","20.8","21.2","21.6","22","22.4","22.8","23.2","23.6","24","32","40","48"],"Web Literature 4":"800388CA","Feature 2":"High Precision geometry","Helix Angle - Degree":"40","Feature 3":"High strength core diameter","Benefit 4":"Higher coating oxidation temp & hardness dramatically improve wear resistance.","Web Video 1":["https://youtu.be/dNdGq78-DvA"],"Hardened Steels : 35 HRC":"H; Best","Web Literature 1":"8002024CA-EM,65|8002024CA-EMT,28","Web Literature 2":"800304CA","Hardened Steels : 35-45 HRC":"H; Best","Alloy Steels : 4140; 4340":"P; Best","Substrate":"Carbide","Web Literature 3":"800366CA|800365CA","Hardened Steels : 45-50 HRC":"H; Best","Die Steels":"P; Best","Cast Iron":"K; Best","High Carbon Steel : 1065":"P; Best","Cutting Type":"Center Cutting","Low Carbon Steel : 1010; 1018":"P; Best","Length of Cut - Specification":"LONG","Hardened Steels : 50-70 HRC":"H; Good","Medium Carbon Steel : 1035; 1045":"P; Best","Stainless Steels : 17-4PH":"M; Best","Shank Tolerance":"h6","Stainless Steels : 300":"M; Best","Benefit 2":"High accuracy all but eliminates need for benching and rework for mold makers.","Stainless Steels : 400":"M; Best","View Speed and Feed Page":"Here","View Catalog Page":"Here","Aluminum : Casting":"N; Good","Units":"Metric","Weldon Flat":"No","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Good","Mill Type":"Single End","Full Description":"Premium High Performance Carbide End Mills for Pre-hardened & Hardened Steels","Short Description":"Premium High Performance Carbide End Mills for Pre-hardened & Hardened Steels","End Cut Type":"Square End","Cutting Direction":"RH","Benefit 1":"The hardest ost wear resistant carbide possible for incredible wear resistance.","Helix Direction":"RH","Benefit 3":"Tools utilize thicker core diameters for the ultimate in strength and rigidity.","Feature 1":"Ultra-fine micrograin carbide","Nickel Alloy : Inconel":"S; Good","Surface Treatment":"WXL","Feature 4":"WXL coating - +1100 Celsius Oxidation Temp. & +3100Hv in hardness","List Name":"WXL-4D-DE","Titanium : 6AL4V (30HRC)":"S; Good","STP Drawing":["Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download"],"DXF Drawing":["Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download"],"Catalog Page Number(s)":"860","CategoryBrand":"EXOCARB","Diameter-Sizes":"0.2mm - 12mm","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"45mm - 100mm","Shank-Sizes":"4mm - 12mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%203723/End_Mills_-_End_Mill_-_EXOCARB_WXL_-_List_3723_-_Catalog"],"Friendly Name":"3723"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%203742/End_Mills_-_End_Mill_-_EXOCARB_WXL_-_List_3742_-_Catalog"],"Diameter - Metric (D)":["3","3.5","4","4.5","5","5.5","6","6.5","7","7.5","8","8.5","9","9.5","10","10.5","11","11.5","12","13","14","15","16","18","20","23","24","25","26"],"Number of Flutes":"4","Overall Length - Metric (L)":["50","60","70","80","90","100","105","115","125","140"],"Cutting Diameter Tolerance - Metric":"+0 / -0.030","Shank Diameter - Metric (d)":["6","8","10","12","16","20","25"],"Helix Angle - Degree":"30","Web Literature 4":"800388CA","Length of Cut - Metric (Lc)":["12","14","17","20","24","28","34","40","48","56","67"],"Product Overview":"4 Flute, Long Length, WXL","Feature 2":"High Precision geometry","Feature 3":"High strength core diameter","Benefit 4":"Higher coating oxidation temp & hardness dramatically improve wear resistance.","Web Video 1":"https://youtu.be/dNdGq78-DvA","Hardened Steels : 35 HRC":"H; Best","Web Literature 1":"8002024CA-EM,72|8002024CA-EMT,38","Hardened Steels : 35-45 HRC":"H; Best","Web Literature 2":"800355CA|800304CA","Alloy Steels : 4140; 4340":"P; Best","Substrate":"Carbide","Web Literature 3":"800366CA|800365CA","Die Steels":"P; Best","Cast Iron":"K; Best","High Carbon Steel : 1065":"P; Best","Cutting Type":"Center Cutting","Low Carbon Steel : 1010; 1018":"P; Best","Hardened Steels : 45-50 HRC":"H; Good","Length of Cut - Specification":["LONG","REGULAR"],"Medium Carbon Steel : 1035; 1045":"P; Best","Stainless Steels : 17-4PH":"M; Best","Shank Tolerance":"h6","Stainless Steels : 300":"M; Best","Benefit 2":"High accuracy all but eliminates need for benching and rework for mold makers.","Stainless Steels : 400":"M; Best","View Speed and Feed Page":"Here","View Catalog Page":"Here","Aluminum : Casting":"N; Good","Units":"Metric","Weldon Flat":"No","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Good","Mill Type":"Single End","Full Description":"Premium High Performance Carbide End Mills for Pre-hardened & Hardened Steels","Short Description":"Premium High Performance Carbide End Mills for Pre-hardened & Hardened Steels","End Cut Type":"Square End","Cutting Direction":"RH","Benefit 1":"The hardest most wear resistant carbide possible for incredible wear resistance.","Helix Direction":"RH","Benefit 3":"Tools utilize thicker core diameters for the ultimate in strength and rigidity.","Feature 1":"Ultra-fine micrograin carbide","Nickel Alloy : Inconel":"S; Good","Surface Treatment":"WXL","Feature 4":"WXL coating - +1100 Celsius Oxidation Temp. & +3100Hv in hardness","List Name":"WXL-EML","Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"3mm - 26mm","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"50mm - 140mm","Shank-Sizes":"6mm - 25mm","Friendly Name":"3742","CategoryBrand":"EXOCARB"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%203791/End_Mills_-_End_Mill_-_EXOCARB_WXL_-_List_3791_-_Catalog"],"Number of Flutes":"2","Overall Length - Metric (L)":["45","50","55","60","70","80","90","100","110","65","120"],"Shank Diameter - Metric (d)":["4","6"],"Cutting Diameter Tolerance - Metric":"+0 / -0.015","Neck Length - Metric (L1)":["0.5","1","1.5","2","2.5","3","3.5","4","5","6","9","7","8","10","12","15","18","14","16","20","24","22","25","30","38","40","45","35","50","60"],"Product Overview":"2 Flute, Stub Length, Long Neck, Rib Processing, WXL","Diameter - Metric (D)":["0.2","0.3","0.4","0.5","0.6","0.7","0.8","0.9","1","1.2","1.4","1.5","1.6","1.8","2","2.5","3","4","5"],"Helix Angle - Degree":"30","Length of Cut - Metric (Lc)":["0.3","0.45","0.6","0.7","0.9","1","1.2","1.35","1.5","1.8","2.1","2.3","2.4","2.7","3","3.7","4.5","6","7.5","2.5"],"Web Literature 4":"800388CA","Feature 2":"High Precision geometry","Stainless Steels : 300":"M; Good","Feature 3":"High strength core diameter","Benefit 4":"Higher coating oxidation temp & hardness dramatically improve wear resistance.","Stainless Steels : 400":"M; Good","Web Video 1":"https://youtu.be/dNdGq78-DvA","Hardened Steels : 35 HRC":"H; Best","Web Literature 1":["8002024CA-EM,66|8002024CA-EMT,30","8002024CA-EM,67|8002024CA-EMT,30"],"Hardened Steels : 35-45 HRC":"H; Best","Web Literature 2":"800304CA|800291CA","Alloy Steels : 4140; 4340":"P; Best","Substrate":"Carbide","Web Literature 3":"800366CA|800365CA","Die Steels":"P; Best","Cast Iron":"K; Best","High Carbon Steel : 1065":"P; Best","Cutting Type":"Center Cutting","Low Carbon Steel : 1010; 1018":"P; Best","Hardened Steels : 45-50 HRC":"H; Good","Medium Carbon Steel : 1035; 1045":"P; Best","Type (feature)":"Long Neck","Shank Tolerance":"h6","Benefit 2":"High accuracy all but eliminates need for benching and rework for mold makers.","Stainless Steels : 17-4PH":"M; Good","View Speed and Feed Page":"Here","View Catalog Page":"Here","Aluminum : Casting":"N; Good","Units":"Metric","Weldon Flat":"No","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Good","Mill Type":"Single End","Full Description":"Premium High Performance Carbide End Mills for Pre-hardened & Hardened Steels","Short Description":"Premium High Performance Carbide End Mills for Pre-hardened & Hardened Steels","End Cut Type":"Square End","Cutting Direction":"RH","Length of Cut - Specification":"STUB","Benefit 1":"The hardest ost wear resistant carbide possible for incredible wear resistance.","Helix Direction":"RH","Benefit 3":"Tools utilize thicker core diameters for the ultimate in strength and rigidity.","Feature 1":"Ultra-fine micrograin carbide","Nickel Alloy : Inconel":"S; Good","Surface Treatment":"WXL","Feature 4":"WXL coating - +1100 Celsius Oxidation Temp. & +3100Hv in hardness","Titanium : 6AL4V (30HRC)":"S; Good","List Name":"WXL-LN-EDS","Neck Diameter - Metric (d1)":["1.45","0.95"],"Diameter-Sizes":"0.2mm - 5mm","Flute-Sizes":"-","Neck-Sizes":"0.5mm - 60mm","Taper-Sizes":"-","Overall-Sizes":"45mm - 120mm","Shank-Sizes":"4mm - 6mm","Friendly Name":"3791","CategoryBrand":"EXOCARB"}

{"Number of Flutes":"4","Neck Diameter - Metric (d1)":["0.95","1.15","1.35","1.45","1.55","1.75","1.95","2.4","2.85"],"Overall Length - Metric (L)":["45","50","60","55","70","65","80"],"Shank Diameter - Metric (d)":["4","6"],"Cutting Diameter Tolerance - Metric":"+0 / -0.015","Neck Length - Metric (L1)":["4","6","8","10","12","16","14","22","18","20","25","30","5"],"Diameter - Metric (D)":["1","1.2","1.4","1.5","1.6","1.8","2","2.5","3"],"Helix Angle - Degree":"35","Web Literature 4":"800388CA","Length of Cut - Metric (Lc)":["1.5","1.8","2.1","2.3","2.4","2.7","3","3.7","4.5"],"Product Overview":"4 Flute, Long Neck, Rib Processing, WXL","Feature 2":"High Precision geometry","Stainless Steels : 300":"M; Good","Feature 3":"High strength core diameter","Benefit 4":"Higher coating oxidation temp & hardness dramatically improve wear resistance.","Stainless Steels : 400":"M; Good","Web Video 1":["https://youtu.be/dNdGq78-DvA"],"Hardened Steels : 35 HRC":"H; Best","Web Literature 1":"8002024CA-EM,70|8002024CA-EMT,36","Hardened Steels : 35-45 HRC":"H; Best","Web Literature 2":"800304CA|800291CA","Alloy Steels : 4140; 4340":"P; Best","Substrate":"Carbide","Web Literature 3":"800366CA|800365CA","Die Steels":"P; Best","Cast Iron":"K; Best","High Carbon Steel : 1065":"P; Best","Cutting Type":"Center Cutting","Low Carbon Steel : 1010; 1018":"P; Best","Hardened Steels : 45-50 HRC":"H; Good","Medium Carbon Steel : 1035; 1045":"P; Best","Type (feature)":"Long Neck","Shank Tolerance":"h6","Benefit 2":"High accuracy all but eliminates need for benching and rework for mold makers.","Stainless Steels : 17-4PH":"M; Good","View Speed and Feed Page":"Here","View Catalog Page":"Here","Aluminum : Casting":"N; Good","Units":"Metric","Weldon Flat":"No","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Good","List Name":"WXL-LN-EMS","Mill Type":"Single End","Full Description":"Premium High Performance Carbide End Mills for Pre-hardened & Hardened Steels","Short Description":"Premium High Performance Carbide End Mills for Pre-hardened & Hardened Steels","End Cut Type":"Square End","Cutting Direction":"RH","Length of Cut - Specification":"STUB","Benefit 1":"The hardest ost wear resistant carbide possible for incredible wear resistance.","Helix Direction":"RH","Benefit 3":"Tools utilize thicker core diameters for the ultimate in strength and rigidity.","Feature 1":"Ultra-fine micrograin carbide","Nickel Alloy : Inconel":"S; Good","Surface Treatment":"WXL","Feature 4":"WXL coating - +1100 Celsius Oxidation Temp. & +3100Hv in hardness","Titanium : 6AL4V (30HRC)":"S; Good","STP Drawing":["Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download"],"DXF Drawing":["Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download"],"Catalog Page Number(s)":"865","CategoryBrand":"EXOCARB","Diameter-Sizes":"1mm - 3mm","Flute-Sizes":"-","Neck-Sizes":"4mm - 30mm","Taper-Sizes":"-","Overall-Sizes":"45mm - 80mm","Shank-Sizes":"4mm - 6mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%203794/End_Mills_-_End_Mill_-_EXOCARB_WXL_-_List_3794_-_Catalog"],"Friendly Name":"3794"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20402/End_Mills_-_End_Mill_-_Carbide_-_List_402_-_Standard_Square_Corner_Radius_-_Catalog"],"Number of Flutes":"2","Overall Length - Metric (L)":["39","51","64","70","76","89","102"],"Shank Diameter - Metric (d)":["3","4","5","6","8","10","11","12","14","16","18","20","22","25"],"Cutting Diameter Tolerance - Metric":"+0 / -0.050","Product Overview":"2 Flute","Diameter - Metric (D)":["0.5","1","1.5","2","2.5","3","3.5","4","4.5","5","6","7","8","9","10","11","12","14","16","18","20","22","25"],"Helix Angle - Degree":"30","Length of Cut - Metric (Lc)":["1.5","3","5","7","8","10","12","14","16","19","21","22","25","30","32","35","38"],"Web Literature 4":"800388CA","Stainless Steels : 300":"M; Good","Stainless Steels : 400":"M; Good","Web Literature 1":["8002024CA-EM,125|8002024CA-EMT,68","8002024CA-EM,127|8002024CA-EMT,68","8002024CA-EM,126|8002024CA-EMT,68"],"Notes":"Other coatings available upon request.","Surface Treatment":["BRIGHT","TiAlN","TiCN"],"Substrate":"Carbide","Hardened Steels : 35 HRC":"H; Good","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":"Center Cutting","Cast Iron":"K; Good","Alloy Steels : 4140; 4340":"P; Good","Die Steels":"P; Good","High Carbon Steel : 1065":"P; Good","Low Carbon Steel : 1010; 1018":"P; Good","Medium Carbon Steel : 1035; 1045":"P; Good","View Speed and Feed Page":"Here","View Catalog Page":"Here","Aluminum : Casting":"N; Good","Deep Side Milling":"No","Plunging":"No","Trochoidal Milling":"No","Units":["Metric","Inch"],"Weldon Flat":"No","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Good","Contour Milling":"Yes","Helical Milling":"Yes","Ramping":"Yes","Side Milling":"Yes","Slotting":"Yes","Mill Type":"Single End","End Cut Type":"Square End","Length of Cut - Specification":["REGULAR","LONG","STUB"],"Full Description":"Standard Carbide End Mills for General Milling Applications","Short Description":"Standard Carbide End Mills for General Milling Applications","Cutting Direction":"RH","List Name":"STANDARD CARBIDE SQ","Helix Direction":"RH","Diameter - Inch (D)":["0.03125","0.046875","0.0625","0.078125","0.09375","1","0.109375","0.125","0.140625","0.15625","0.171875","0.1875","0.203125","0.21875","0.234375","0.25","0.265625","0.28125","0.296875","0.3125","0.328125","0.34375","0.359375","0.375","0.390625","0.40625","0.421875","0.4375","0.453125","0.46875","0.484375","0.5","0.5625","0.625","0.6875","0.75","0.875"],"Cutting Diameter Tolerance - Inch":"+0 / -0.002","Diameter - Fractional Size (D)":["1/32","3/64","1/16","5/64","3/32","1","7/64","1/8","9/64","5/32","11/64","3/16","13/64","7/32","15/64","1/4","17/64","9/32","19/64","5/16","21/64","11/32","23/64","3/8","25/64","13/32","27/64","7/16","29/64","15/32","31/64","1/2","9/16","5/8","11/16","3/4","7/8"],"Shank Diameter - Inch (d)":["0.125","1","0.1875","0.25","0.3125","0.375","0.4375","0.5","0.5625","0.625","0.75","0.875"],"Length of Cut - Inch (Lc)":["0.125","0.140625","0.1875","0.25","0.3125","0.375","1.5","0.5","0.5625","0.625","0.75","0.8125","0.875","1","1.125","1.25","1.375"],"Overall Length - Inch (L)":["1.5","4","2","2.5","2.75","3","3.5"],"Diameter-Sizes":"0.5mm - 1\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"1.5\" - 102mm","Shank-Sizes":"3mm - 1\"","Friendly Name":"402","CategoryBrand":"OSG"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20403/End_Mills_-_End_Mill_-_Carbide_-_List_403_-_Standard_Square_Corner_Radius_-_Catalog"],"Number of Flutes":"3","Length of Cut - Metric (Lc)":["3","5","7","8","10","12","14","16","19","21","22","25","30","32","35","38"],"Overall Length - Metric (L)":["39","51","64","70","76","89","102"],"Shank Diameter - Metric (d)":["3","4","5","6","8","10","11","12","14","16","18","20","22","25"],"Cutting Diameter Tolerance - Metric":"+0 / -0.050","Product Overview":"3 Flute","Diameter - Metric (D)":["1","1.5","2","2.5","3","3.5","4","4.5","5","6","7","8","9","10","11","12","14","16","18","20","22","25"],"Helix Angle - Degree":"30","Web Literature 4":"800388CA","Stainless Steels : 300":"M; Good","Stainless Steels : 400":"M; Good","Web Literature 1":["8002024CA-EM,128|8002024CA-EMT,68","8002024CA-EM,130|8002024CA-EMT,68","8002024CA-EM,129|8002024CA-EMT,68"],"Notes":"Other coatings available upon request.","Surface Treatment":["BRIGHT","TiAlN"],"Substrate":"Carbide","Hardened Steels : 35 HRC":"H; Good","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":"Center Cutting","Cast Iron":"K; Good","Hardened Steels : 45-50 HRC":"H; Good","Alloy Steels : 4140; 4340":"P; Good","Die Steels":"P; Good","High Carbon Steel : 1065":"P; Good","Low Carbon Steel : 1010; 1018":"P; Good","Medium Carbon Steel : 1035; 1045":"P; Good","View Speed and Feed Page":"Here","View Catalog Page":"Here","Aluminum : Casting":"N; Good","Deep Side Milling":"No","Plunging":"No","Trochoidal Milling":"No","Units":["Metric","Inch"],"Weldon Flat":"No","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Good","Contour Milling":"Yes","Helical Milling":"Yes","Ramping":"Yes","Side Milling":"Yes","Slotting":"Yes","Mill Type":"Single End","End Cut Type":"Square End","Length of Cut - Specification":["REGULAR","LONG","STUB"],"Full Description":"Standard Carbide End Mills for General Milling Applications","Short Description":"Standard Carbide End Mills for General Milling Applications","Cutting Direction":"RH","List Name":"STANDARD CARBIDE SQ","Helix Direction":"RH","Diameter - Inch (D)":["0.0625","0.078125","0.09375","1","0.109375","0.125","0.140625","0.15625","0.171875","0.1875","0.203125","0.21875","0.234375","0.25","0.265625","0.28125","0.296875","0.3125","0.375","0.4375","0.5","0.5625","0.625","0.6875","0.75","0.875"],"Cutting Diameter Tolerance - Inch":"+0 / -0.002","Diameter - Fractional Size (D)":["1/16","5/64","3/32","1","7/64","1/8","9/64","5/32","11/64","3/16","13/64","7/32","15/64","1/4","17/64","9/32","19/64","5/16","3/8","7/16","1/2","9/16","5/8","11/16","3/4","7/8"],"Shank Diameter - Inch (d)":["0.125","1","0.1875","0.25","0.3125","0.375","0.4375","0.5","0.5625","0.625","0.75","0.875"],"Overall Length - Inch (L)":["1.5","4","2","2.5","2.75","3","3.5"],"Length of Cut - Inch (Lc)":["0.1875","0.25","0.3125","0.375","1.5","0.5","0.5625","0.625","0.75","0.8125","1","1.125","1.25","1.375"],"Diameter-Sizes":"1mm - 1\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"1.5\" - 102mm","Shank-Sizes":"3mm - 1\"","Friendly Name":"403","CategoryBrand":"OSG"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20404/End_Mills_-_End_Mill_-_Carbide_-_List_404_-_Standard_Square_Corner_Radius_-_Catalog"],"Number of Flutes":"4","Diameter - Inch (D)":["0.03125","0.046875","0.0625","0.078125","0.09375","1","0.109375","0.125","0.140625","0.15625","0.171875","0.1875","0.203125","0.21875","0.234375","0.25","0.265625","0.28125","0.296875","0.3125","0.328125","0.34375","0.359375","0.375","0.390625","0.40625","0.421875","0.4375","0.453125","0.46875","0.484375","0.5","0.5625","0.625","0.6875","0.75","0.875"],"Cutting Diameter Tolerance - Inch":"+0 / -0.002","Diameter - Fractional Size (D)":["1/32","3/64","1/16","5/64","3/32","1","7/64","1/8","9/64","5/32","11/64","3/16","13/64","7/32","15/64","1/4","17/64","9/32","19/64","5/16","21/64","11/32","23/64","3/8","25/64","13/32","27/64","7/16","29/64","15/32","31/64","1/2","9/16","5/8","11/16","3/4","7/8"],"Shank Diameter - Inch (d)":["0.125","1","0.1875","0.25","0.3125","0.375","0.4375","0.5","0.5625","0.625","0.75","0.875"],"Length of Cut - Inch (Lc)":["0.125","0.140625","0.1875","0.25","0.3125","0.375","1.5","0.5","0.5625","0.625","0.75","0.8125","0.875","1","1.125","1.25","1.375"],"Overall Length - Inch (L)":["1.5","4","2","2.5","2.75","3","3.5"],"Helix Angle - Degree":"30","Web Literature 4":"800388CA","Product Overview":"4 Flute","Stainless Steels : 300":"M; Good","Stainless Steels : 400":"M; Good","Web Literature 1":["8002024CA-EM,131|8002024CA-EMT,72","8002024CA-EM,133|8002024CA-EMT,72","8002024CA-EM,132|8002024CA-EMT,72"],"Notes":"Other coatings available upon request.","Surface Treatment":["BRIGHT","TiAlN"],"Units":["Inch","Metric"],"Substrate":"Carbide","Hardened Steels : 35 HRC":"H; Good","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":"Center Cutting","Cast Iron":"K; Good","Hardened Steels : 45-50 HRC":"H; Good","Length of Cut - Specification":["LONG","REGULAR","STUB"],"Alloy Steels : 4140; 4340":"P; Good","Die Steels":"P; Good","High Carbon Steel : 1065":"P; Good","Low Carbon Steel : 1010; 1018":"P; Good","Medium Carbon Steel : 1035; 1045":"P; Good","View Speed and Feed Page":"Here","View Catalog Page":"Here","Aluminum : Casting":"N; Good","Deep Side Milling":"No","Plunging":"No","Trochoidal Milling":"No","Weldon Flat":"No","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Good","Contour Milling":"Yes","Helical Milling":"Yes","Ramping":"Yes","Side Milling":"Yes","Slotting":"Yes","Mill Type":"Single End","End Cut Type":"Square End","Full Description":"Standard Carbide End Mills for General Milling Applications","Short Description":"Standard Carbide End Mills for General Milling Applications","Cutting Direction":"RH","List Name":"STANDARD CARBIDE SQ","Helix Direction":"RH","Length of Cut - Metric (Lc)":["3","5","7","8","10","12","14","16","19","21","22","25","30","32","35","38"],"Overall Length - Metric (L)":["39","51","64","70","76","89","102"],"Shank Diameter - Metric (d)":["3","4","5","6","8","10","11","12","14","16","18","20","22","25"],"Cutting Diameter Tolerance - Metric":"+0 / -0.050","Diameter - Metric (D)":["1","1.5","2","2.5","3","3.5","4","4.5","5","6","7","8","9","10","11","12","14","16","18","20","22","25"],"Diameter-Sizes":"1/32\" - 1\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"1.5\" - 102mm","Shank-Sizes":"3mm - 1\"","Friendly Name":"404","CategoryBrand":"OSG"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20410/End_Mills_-_End_Mill_-_Roughing_Cut_-_List_410_-_Roughing_End_Mills_-_Catalog"],"Number of Flutes":"3","Diameter - Fractional Size (D)":["1/2","5/8","3/4","1"],"Diameter - Inch (D)":["0.5","0.625","0.75","1"],"Helix Angle - Degree":"25","Product Overview":"3 Flute, HSS-Co, Regular Pitch, Stub, Roughing Cut","Length of Cut - Inch (Lc)":["0.5","0.625","0.75","1"],"Overall Length - Inch (L)":["2.5","2.75","2.875","3.5"],"Web Literature 4":"800388CA","Shank Diameter - Inch (d)":["0.5","0.625","0.75","1"],"Stainless Steels : 300":"M; Good","Substrate":"HSS-CO","Stainless Steels : 400":"M; Good","Web Literature 1":"8002024CA-EM,178|8002024CA-EMT,88","Notes":"Other coatings available upon request.","Surface Treatment":"BRIGHT","Units":"Inch","Hardened Steels : 35 HRC":"H; Good","Cutting Type":"Center Cutting","Cast Iron":"K; Good","List Name":"COBALT HSS ROUGHER SQ","Full Description":"Cobalt-HSS Roughing Cut End Mills for Ferrous and Non-Ferrous Materials","Short Description":"Cobalt-HSS Roughing Cut End Mills for Ferrous and Non-Ferrous Materials","Alloy Steels : 4140; 4340":"P; Good","Die Steels":"P; Good","High Carbon Steel : 1065":"P; Good","Stainless Steels : 17-4PH":"M; Good","Low Carbon Steel : 1010; 1018":"P; Good","Medium Carbon Steel : 1035; 1045":"P; Good","View Speed and Feed Page":"Here","View Catalog Page":"Here","Aluminum : Casting":"N; Good","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Good","Weldon Flat":"Yes","Mill Type":"Single End","End Cut Type":"Square End","Cutting Direction":"RH","Length of Cut - Specification":"STUB","Helix Direction":"RH","Type (feature)":"Roughing","Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"1/2\" - 1\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"2.5\" - 3.5\"","Shank-Sizes":"0.5\" - 1\"","Friendly Name":"410","CategoryBrand":"OSG"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20412/End_Mills_-_End_Mill_-_Carbide_-_List_412_-_Standard_Square_Corner_Radius_-_Catalog"],"Number of Flutes":"2","Diameter - Inch (D)":["0.03125","0.046875","0.0625","0.078125","0.09375","0.109375","0.125","0.140625","0.15625","0.1875","0.21875","0.25","0.3125","0.375","0.4375","0.5","0.625","0.75"],"Cutting Diameter Tolerance - Inch":"+0 / -0.002","Diameter - Fractional Size (D)":["1/32","3/64","1/16","5/64","3/32","7/64","1/8","9/64","5/32","3/16","7/32","1/4","5/16","3/8","7/16","1/2","5/8","3/4"],"Product Overview":"2 Flute","Shank Diameter - Inch (d)":["0.125","0.1875","0.25","0.3125","0.375","0.4375","0.5","0.625","0.75"],"Length of Cut - Inch (Lc)":["0.078125","0.09375","0.125","0.15625","0.1875","0.21875","0.25","0.28125","0.3125","0.375","0.4375","0.5","0.625","0.75","1"],"Overall Length - Inch (L)":["1.5","2","2.5","3"],"Helix Angle - Degree":"30","Web Literature 4":"800388CA","Stainless Steels : 300":"M; Good","Stainless Steels : 400":"M; Good","Web Literature 1":"8002024CA-EM,122|8002024CA-EMT,68","Notes":"Other coatings available upon request.","Surface Treatment":["BRIGHT","TiCN","TiAlN"],"Units":["Inch","Metric"],"Substrate":"Carbide","Hardened Steels : 35 HRC":"H; Good","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":"Center Cutting","Cast Iron":"K; Good","Hardened Steels : 45-50 HRC":"H; Good","Alloy Steels : 4140; 4340":"P; Good","Die Steels":"P; Good","High Carbon Steel : 1065":"P; Good","Low Carbon Steel : 1010; 1018":"P; Good","Medium Carbon Steel : 1035; 1045":"P; Good","View Speed and Feed Page":"Here","View Catalog Page":"Here","Aluminum : Casting":"N; Good","Weldon Flat":"No","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Good","Mill Type":"Single End","End Cut Type":"Square End","Length of Cut - Specification":["REGULAR","STUB"],"Full Description":"Standard Carbide End Mills for General Milling Applications","Short Description":"Standard Carbide End Mills for General Milling Applications","Cutting Direction":"RH","List Name":"STANDARD CARBIDE SQ","Helix Direction":"RH","Length of Cut - Metric (Lc)":["2","3","4","5","6","7","8","9","10","12","14","16"],"Overall Length - Metric (L)":["39","51","64"],"Shank Diameter - Metric (d)":["3","4","5","6","8","10","11","12"],"Cutting Diameter Tolerance - Metric":"+0 / -0.050","Diameter - Metric (D)":["1","1.5","2","2.5","3","3.5","4","4.5","5","6","7","8","9","10","11","12"],"Diameter-Sizes":"1/32\" - 0.75\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"1.5\" - 3\"","Shank-Sizes":"3mm - 0.75\"","Friendly Name":"412","CategoryBrand":"OSG"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20414/End_Mills_-_End_Mill_-_Carbide_-_List_414_-_Standard_Square_Corner_Radius_-_Catalog"],"Number of Flutes":"4","Diameter - Inch (D)":["0.03125","0.046875","0.0625","0.078125","0.09375","0.109375","0.125","0.140625","0.15625","0.1875","0.21875","0.25","0.3125","0.375","0.4375","0.5","0.625","0.75"],"Cutting Diameter Tolerance - Inch":"+0 / -0.002","Diameter - Fractional Size (D)":["1/32","3/64","1/16","5/64","3/32","7/64","1/8","9/64","5/32","3/16","7/32","1/4","5/16","3/8","7/16","1/2","5/8","3/4"],"Shank Diameter - Inch (d)":["0.125","0.1875","0.25","0.3125","0.375","0.4375","0.5","0.625","0.75"],"Length of Cut - Inch (Lc)":["0.078125","0.09375","0.125","0.15625","0.1875","0.21875","0.25","0.28125","0.3125","0.375","0.4375","0.5","0.625","0.75","1"],"Overall Length - Inch (L)":["1.5","2","2.5","3"],"Helix Angle - Degree":"30","Web Literature 4":"800388CA","Product Overview":"4 Flute, Stub Length","Stainless Steels : 300":"M; Good","Stainless Steels : 400":"M; Good","Web Literature 1":["8002024CA-EM,123|8002024CA-EMT,72","8002024CA-EM,124|8002024CA-EMT,72"],"Notes":"Other coatings available upon request.","Surface Treatment":["BRIGHT","TiAlN"],"Units":["Inch","Metric"],"Substrate":"Carbide","Hardened Steels : 35 HRC":"H; Good","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":"Center Cutting","Cast Iron":"K; Good","Hardened Steels : 45-50 HRC":"H; Good","Alloy Steels : 4140; 4340":"P; Good","Die Steels":"P; Good","High Carbon Steel : 1065":"P; Good","Low Carbon Steel : 1010; 1018":"P; Good","Medium Carbon Steel : 1035; 1045":"P; Good","View Speed and Feed Page":"Here","View Catalog Page":"Here","Aluminum : Casting":"N; Good","Weldon Flat":"No","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Good","Mill Type":"Single End","End Cut Type":"Square End","Length of Cut - Specification":["REGULAR","STUB"],"Full Description":"Standard Carbide End Mills for General Milling Applications","Short Description":"Standard Carbide End Mills for General Milling Applications","Cutting Direction":"RH","List Name":"STANDARD CARBIDE SQ","Helix Direction":"RH","Length of Cut - Metric (Lc)":["2","3","4","5","6","7","8","9","10","12","14","16"],"Overall Length - Metric (L)":["39","51","64"],"Shank Diameter - Metric (d)":["3","4","5","6","8","10","11","12"],"Cutting Diameter Tolerance - Metric":"+0 / -0.050","Diameter - Metric (D)":["1","1.5","2","2.5","3","3.5","4","4.5","5","6","7","8","9","10","11","12"],"Diameter-Sizes":"1/32\" - 0.75\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"1.5\" - 3\"","Shank-Sizes":"3mm - 0.75\"","Friendly Name":"414","CategoryBrand":"OSG"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20415/End_Mills_-_End_Mill_-_Carbide_-_List_415_-_Standard_Square_Corner_Radius_-_Catalog"],"Overall Length - Inch (L)":["4","1.5","2","2.5","2.75","3","3.5"],"Shank Diameter - Inch (d)":["1","0.125","0.1875","0.25","0.3125","0.375","0.4375","0.5","0.5625","0.625","0.75","0.875"],"Cutting Diameter Tolerance - Inch":["+0 / -0.005","+0 / -0.003","+0 / -0.004"],"Diameter - Fractional Size (D)":["1","1/8","5/32","3/16","7/32","1/4","5/16","3/8","7/16","1/2","9/16","5/8","3/4","7/8"],"Helix Angle - Degree":"15","Diameter - Inch (D)":["1","0.125","0.15625","0.1875","0.21875","0.25","0.3125","0.375","0.4375","0.5","0.5625","0.625","0.75","0.875"],"Length of Cut - Inch (Lc)":["1.5","0.5","0.5625","0.625","0.75","0.8125","1","1.125","1.25"],"Web Literature 4":"800388CA","Cutting Type":"End Cutting","Web Literature 1":"8002024CA-EM,140","Notes":"Other coatings available upon request.","Surface Treatment":"BRIGHT","Units":"Inch","Substrate":"Carbide","Hardened Steels : 35 HRC":"H; Good","Hardened Steels : 35-45 HRC":"H; Good","Hardened Steels : 45-50 HRC":"H; Good","Alloy Steels : 4140; 4340":"P; Good","High Carbon Steel : 1065":"P; Good","View Catalog Page":"Here","Weldon Flat":"No","Coolant Thru":"No","Mill Type":"Single End","End Cut Type":"Square End","Full Description":"Standard Carbide End Mills for General Milling Applications","Short Description":"Standard Carbide End Mills for General Milling Applications","Cutting Direction":"RH","List Name":"STANDARD CARBIDE TOUGHY MILLS","Length of Cut - Specification":["STUB","LONG","REGULAR"],"Helix Direction":"RH","Type (feature)":"Toughy Mill","Product Overview":"Toughy Mills","Diameter-Sizes":"1/8\" - 1\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"1.5\" - 4\"","Shank-Sizes":"0.125\" - 1\"","Friendly Name":"415","CategoryBrand":"OSG"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20420/End_Mills_-_End_Mill_-_Roughing_Cut_-_List_420_-_Roughing_End_Mills_-_Catalog"],"Number of Flutes":["3","4","6"],"Diameter - Inch (D)":["0.25","0.375","0.5","0.625","0.75","0.875","1","1.25","1.5"],"Diameter - Fractional Size (D)":["1/4","3/8","1/2","5/8","3/4","7/8","1","1-1/4","1-1/2"],"Helix Angle - Degree":"25","Length of Cut - Inch (Lc)":["0.25","0.375","0.5","0.625","0.75","0.875","1","1.25"],"Overall Length - Inch (L)":["2.0625","2.15625","2.5","2.75","2.875","3.125","3.5","3.75"],"Shank Diameter - Inch (d)":["0.375","0.5","0.625","0.75","1","1.25"],"Web Literature 4":"800388CA","Substrate":"HSS-CO","Stainless Steels : 400":"M; Good","Web Literature 1":"8002024CA-EM,176|8002024CA-EMT,85","Notes":"Other coatings available upon request.","Surface Treatment":"BRIGHT","Units":"Inch","Hardened Steels : 35 HRC":"H; Good","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":"Center Cutting","Cast Iron":"K; Good","List Name":"COBALT HSS ROUGHER SQ","Full Description":"Cobalt-HSS Roughing Cut End Mills for Ferrous and Non-Ferrous Materials","Short Description":"Cobalt-HSS Roughing Cut End Mills for Ferrous and Non-Ferrous Materials","Alloy Steels : 4140; 4340":"P; Good","Stainless Steels : 300":"M; Best","Die Steels":"P; Good","High Carbon Steel : 1065":"P; Good","Stainless Steels : 17-4PH":"M; Good","Low Carbon Steel : 1010; 1018":"P; Good","View Speed and Feed Page":"Here","View Catalog Page":"Here","Aluminum : Casting":"N; Good","Product Overview":"Multiple Flute, HSS-Co, Fine Pitch, Stub, Roughing Cut","Coolant Thru":"No","Medium Carbon Steel : 1035; 1045":"P; Good","Weldon Flat":"Yes","Mill Type":"Single End","End Cut Type":"Square End","Cutting Direction":"RH","Length of Cut - Specification":"STUB","Helix Direction":"RH","Type (feature)":"Roughing, Fine Pitch","Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"1/4\" - 1.5\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"2.0625\" - 3.75\"","Shank-Sizes":"0.375\" - 1.25\"","Friendly Name":"420","CategoryBrand":"OSG"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20424/End_Mills_-_End_Mill_-_Carbide_-_List_424_-_Standard_Double_End_-_Catalog"],"Number of Flutes":"4","Diameter - Inch (D)":["0.03125","0.046875","0.0625","0.078125","0.09375","0.109375","0.125","0.140625","0.15625","0.1875","0.21875","0.25","0.3125","0.375","0.4375","0.5"],"Cutting Diameter Tolerance - Inch":"+0 / -0.002","Diameter - Fractional Size (D)":["1/32","3/64","1/16","5/64","3/32","7/64","1/8","9/64","5/32","3/16","7/32","1/4","5/16","3/8","7/16","1/2"],"Shank Diameter - Inch (d)":["0.125","0.1875","0.25","0.3125","0.375","0.4375","0.5"],"Length of Cut - Inch (Lc)":["0.078125","0.09375","0.125","0.15625","0.1875","0.21875","0.25","0.28125","0.3125","0.375","0.5","0.5625","0.625"],"Overall Length - Inch (L)":["1.5","2","2.5","2.75","3"],"Helix Angle - Degree":"30","Web Literature 4":"800388CA","Product Overview":"4 Flute, Stub Length, Double End","Stainless Steels : 300":"M; Good","Stainless Steels : 400":"M; Good","Web Literature 1":"8002024CA-EM,141|8002024CA-EMT,72","Notes":"Other coatings available upon request.","Surface Treatment":["BRIGHT","TiAlN"],"Units":"Inch","Substrate":"Carbide","Hardened Steels : 35 HRC":"H; Good","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":"Center Cutting","Cast Iron":"K; Good","Hardened Steels : 45-50 HRC":"H; Good","Alloy Steels : 4140; 4340":"P; Good","Mill Type":"Double End","Die Steels":"P; Good","High Carbon Steel : 1065":"P; Good","Low Carbon Steel : 1010; 1018":"P; Good","View Speed and Feed Page":"Here","View Catalog Page":"Here","Aluminum : Casting":"N; Good","Weldon Flat":"No","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Good","Medium Carbon Steel : 1035; 1045":"P; Good","End Cut Type":"Square End","Length of Cut - Specification":["REGULAR","STUB"],"List Name":"STANDARD CARBIDE DOUBLE END SQ","Full Description":"Standard Carbide End Mills for General Milling Applications","Short Description":"Standard Carbide End Mills for General Milling Applications","Cutting Direction":"RH","Helix Direction":"RH","Diameter-Sizes":"1/32\" - 0.5\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"1.5\" - 3\"","Shank-Sizes":"0.125\" - 0.5\"","Friendly Name":"424","CategoryBrand":"OSG"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20430E/End_Mills_-_End_Mill_-_Roughing_Cut_-_List_430_-_Roughing_End_Mills_-_Catalog"],"Number of Flutes":"3","Overall Length - Inch (L)":["3.25","4","3.75","4.625","3","3.875","5.25","4.125","2.625","4.25","3.5","4.5","5.5","6.5"],"Diameter - Fractional Size (D)":["1/2","5/8","3/4","7/8","3/8","1","1-1/4","1-1/2"],"Diameter - Inch (D)":["0.5","0.625","0.75","0.875","0.375","1","1.25","1.5"],"Product Overview":"3 Flute, HSS-Co, Roughing Cut for Aluminum","Length of Cut - Inch (Lc)":["1.25","2","1.625","2.5","0.75","3","1.875","0.875","1","4"],"Helix Angle - Degree":"35","Web Literature 4":"800388CA","Shank Diameter - Inch (d)":["0.5","0.625","0.75","0.875","0.375","1","1.25"],"Substrate":"HSS-CO","Web Literature 1":"8002024CA-EM,179|8002024CA-EMT,89","Notes":"Other coatings available upon request.","Surface Treatment":"BRIGHT","Units":"Inch","Cutting Type":"Center Cutting","List Name":"COBALT HSS ROUGHER SQ","Full Description":"Cobalt-HSS Roughing Cut End Mills for Aluminum","Short Description":"Cobalt-HSS Roughing Cut End Mills for Aluminum","View Speed and Feed Page":"Here","View Catalog Page":"Here","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Coolant Thru":"No","Weldon Flat":"Yes","Mill Type":"Single End","End Cut Type":"Square End","Length of Cut - Specification":["REGULAR","LONG","STUB"],"Cutting Direction":"RH","Helix Direction":"RH","Type (feature)":"Roughing","Diameter-Sizes":"3/8\" - 1.5\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"2.625\" - 6.5\"","Shank-Sizes":"0.375\" - 1.25\"","Friendly Name":"430E","CategoryBrand":"OSG"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20444/End_Mills_-_End_Mill_-_Carbide_-_List_444_-_Standard_Double_End_-_Catalog"],"Overall Length - Inch (L)":["3.0625","3.125","3.25","3.375","3.5","4"],"Number of Flutes":"4","Diameter - Inch (D)":["0.125","0.15625","0.1875","0.21875","0.25","0.28125","0.3125","0.34375","0.375","0.4375","0.5"],"Cutting Diameter Tolerance - Inch":"+0 / -0.002","Diameter - Fractional Size (D)":["1/8","5/32","3/16","7/32","1/4","9/32","5/16","11/32","3/8","7/16","1/2"],"Length of Cut - Inch (Lc)":["0.375","0.4375","0.5","0.5625","0.625","0.6875","0.75","0.875","1"],"Helix Angle - Degree":"30","Shank Diameter - Inch (d)":["0.375","0.5"],"Product Overview":"4 Flute, Double End","Web Literature 4":"800388CA","Stainless Steels : 300":"M; Good","Stainless Steels : 400":"M; Good","Web Literature 1":"8002024CA-EM,142|8002024CA-EMT,72","Surface Treatment":["BRIGHT","TiAlN"],"Units":"Inch","Substrate":"Carbide","Hardened Steels : 35 HRC":"H; Good","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":"Center Cutting","Cast Iron":"K; Good","Hardened Steels : 45-50 HRC":"H; Good","Alloy Steels : 4140; 4340":"P; Good","Mill Type":"Double End","Die Steels":"P; Good","High Carbon Steel : 1065":"P; Good","Low Carbon Steel : 1010; 1018":"P; Good","View Speed and Feed Page":"Here","View Catalog Page":"Here","Aluminum : Casting":"N; Good","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Good","Medium Carbon Steel : 1035; 1045":"P; Good","Weldon Flat":"Yes","End Cut Type":"Square End","Length of Cut - Specification":"REGULAR","List Name":"STANDARD CARBIDE DOUBLE END SQ","Full Description":"Standard Carbide End Mills for General Milling Applications","Short Description":"Standard Carbide End Mills for General Milling Applications","Cutting Direction":"RH","Helix Direction":"RH","Diameter-Sizes":"1/8\" - 0.5\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"3.0625\" - 4\"","Shank-Sizes":"0.375\" - 0.5\"","Friendly Name":"444","CategoryBrand":"OSG"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20447/End_Mills_-_End_Mill_-_Carbide_-_List_447_-_Standard_Square_End_-_Catalog"],"Number of Flutes":"4","Diameter - Inch (D)":["0.0625","1","0.125","0.1875","0.25","0.3125","0.375","0.5","0.625","0.75"],"Cutting Diameter Tolerance - Inch":"+0 / -0.002","Diameter - Fractional Size (D)":["1/16","1","1/8","3/16","1/4","5/16","3/8","1/2","5/8","3/4"],"Shank Diameter - Inch (d)":["0.125","1","0.1875","0.25","0.3125","0.375","0.5","0.625","0.75"],"Length of Cut - Inch (Lc)":["0.1875","1.5","0.5","0.625","0.75","0.8125","1","1.25"],"Overall Length - Inch (L)":["1.5","4","2","2.5","3","3.5"],"Helix Angle - Degree":"30","Web Literature 4":"800388CA","Feature 1":"4 Flute, LHS/RHS 45º","Product Overview":"4 Flute, LHS/RHS 45º","Stainless Steels : 300":"M; Good","Stainless Steels : 400":"M; Good","Web Literature 1":"8002024CA-EM,134|8002024CA-EMT,72","Notes":"Other coatings available upon request.","Surface Treatment":["BRIGHT","TiAlN"],"Units":"Inch","Substrate":"Carbide","Hardened Steels : 35 HRC":"H; Good","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":"Center Cutting","Cast Iron":"K; Good","Helix Direction":"LH","Hardened Steels : 45-50 HRC":"H; Good","Alloy Steels : 4140; 4340":"P; Good","High Carbon Steel : 1065":"P; Good","Low Carbon Steel : 1010; 1018":"P; Good","View Speed and Feed Page":"Here","View Catalog Page":"Here","Aluminum : Casting":"N; Good","Weldon Flat":"No","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Good","Medium Carbon Steel : 1035; 1045":"P; Good","Mill Type":"Single End","End Cut Type":"Square End","Length of Cut - Specification":["REGULAR","STUB","LONG"],"Full Description":"Standard Carbide End Mills for General Milling Applications, LHS/RHS","Short Description":"Standard Carbide End Mills for General Milling Applications, LHS/RHS","List Name":"STANDARD CARBIDE LHS/RHC","Cutting Direction":"RH","Diameter-Sizes":"1/16\" - 1\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"1.5\" - 4\"","Shank-Sizes":"0.125\" - 1\"","Friendly Name":"447","CategoryBrand":"OSG"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20450/End_Mills_-_End_Mill_-_Roughing_Cut_-_List_450_-_Roughing_End_Mills_-_Catalog"],"Overall Length - Inch (L)":["3.25","4","3.75","4.625","5.125","3.875","4.5","5.25","6.25","4.125","5.75","2.375","2.5","3.0625","3.125","2.625","2.6875","4.25","5.5","6.5","7.5","6.75","7.75","9.75","11.75"],"Number of Flutes":["4","5","3","6","8"],"Diameter - Inch (D)":["0.4375","0.5","0.625","0.75","0.875","0.1875","0.25","0.3125","0.375","1","1.125","1.25","1.5","1.75","2"],"Helix Angle - Degree":"30","Length of Cut - Inch (Lc)":["1.25","2","1.625","2.5","3","2.25","4","1.875","3.5","0.5","0.75","1.375","0.875","1.5","1","5","6","8"],"Shank Diameter - Inch (d)":["0.5","0.625","0.75","0.875","0.375","1","1.25","2"],"Web Literature 4":"800388CA","Substrate":"HSS-CO","Diameter - Fractional Size (D)":["7/16","1/2","5/8","3/4","7/8","3/16","1/4","5/16","3/8","1","1-1/8","1-1/4","1-1/2","1-3/4","2"],"Stainless Steels : 400":"M; Good","Web Literature 1":"8002024CA-EM,173|8002024CA-EMT,85","Surface Treatment":["BRIGHT","TiCN"],"Notes":"Other coatings available upon request. 2\" diameter shanks have combination drive.","Units":"Inch","Hardened Steels : 35 HRC":"H; Good","Hardened Steels : 35-45 HRC":"H; Good","Cast Iron":"K; Good","List Name":"COBALT HSS EX-REEF","Full Description":"Cobalt-HSS Roughing Cut End Mills for Ferrous and Non-Ferrous Materials","Short Description":"Cobalt-HSS Roughing Cut End Mills for Ferrous and Non-Ferrous Materials","Alloy Steels : 4140; 4340":"P; Good","Stainless Steels : 300":"M; Best","Die Steels":"P; Good","High Carbon Steel : 1065":"P; Good","Stainless Steels : 17-4PH":"M; Good","Low Carbon Steel : 1010; 1018":"P; Good","View Speed and Feed Page":"Here","View Catalog Page":"Here","Aluminum : Casting":"N; Good","Product Overview":"Multiple Flute, HSS-Co, Fine Pitch, Stub, Regular, Long, Roughing Cut","Coolant Thru":"No","Cutting Type":"Non-Center Cutting","Medium Carbon Steel : 1035; 1045":"P; Good","Weldon Flat":"Yes","Mill Type":"Single End","End Cut Type":"Square End","Length of Cut - Specification":["REGULAR","LONG","EXTRA LONG","STUB"],"Cutting Direction":"RH","Helix Direction":"RH","Type (feature)":"Roughing, Fine Pitch","Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"3/16\" - 2\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"2.375\" - 11.75\"","Shank-Sizes":"0.375\" - 2\"","Friendly Name":"450","CategoryBrand":"OSG"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20455/End_Mills_-_End_Mill_-_Roughing_Cut_-_List_455_-_Roughing_End_Mills_-_Catalog"],"Number of Flutes":["3","4","5","6","8"],"Diameter - Fractional Size (D)":["1/2","5/8","3/4","1/4","5/16","3/8","7/16","1","1-1/4","1-1/2","2"],"Diameter - Inch (D)":["0.5","0.625","0.75","0.25","0.3125","0.375","0.4375","1","1.25","1.5","2"],"Length of Cut - Inch (Lc)":["0.5","1.25","2","0.625","1.625","2.5","0.75","3","4","2.25","0.25","0.3125","1.375","0.375","0.875","1.5","1","6","8"],"Helix Angle - Degree":"30","Overall Length - Inch (L)":["2.5","3.25","4","2.75","3.75","4.125","4.625","2.875","3.875","4.5","5.25","6.25","2.0625","3.0625","3.125","2.15625","2.625","5","5.5","6.5","3.5","2.4375","6.75","7.75","9.75","11.75"],"Shank Diameter - Inch (d)":["0.5","0.625","0.75","0.375","1","1.25","2"],"Web Literature 4":"800388CA","Substrate":"HSS-CO","Web Literature 1":["8002024CA-EM,174|8002024CA-EMT,86","8002024CA-EM,175|8002024CA-EMT,86"],"Hardened Steels : 35 HRC":"H; Best","Units":"Inch","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":["Center Cutting","Non-Center Cutting"],"Cast Iron":"K; Good","Notes":"Center cutting available in stub length only.","List Name":"COBALT HSS ROUGHER SQ","Full Description":"Cobalt-HSS Roughing Cut End Mills for Ferrous and Non-Ferrous Materials","Short Description":"Cobalt-HSS Roughing Cut End Mills for Ferrous and Non-Ferrous Materials","Alloy Steels : 4140; 4340":"P; Good","Stainless Steels : 300":"M; Best","Die Steels":"P; Good","Stainless Steels : 400":"M; Best","High Carbon Steel : 1065":"P; Good","Stainless Steels : 17-4PH":"M; Good","Low Carbon Steel : 1010; 1018":"P; Good","View Speed and Feed Page":"Here","View Catalog Page":"Here","Aluminum : Casting":"N; Good","Product Overview":"Multiple Flute, HSS-Co, Fine Pitch, Stub, Regular Long, Roughing Cut, TiCN, TiALN","Coolant Thru":"No","Medium Carbon Steel : 1035; 1045":"P; Good","Weldon Flat":"Yes","Mill Type":"Single End","End Cut Type":"Square End","Cutting Direction":"RH","Length of Cut - Specification":["STUB","REGULAR","LONG","EXTRA LONG"],"Surface Treatment":["TiCN","TiAlN"],"Helix Direction":"RH","Type (feature)":"Roughing, Fine Pitch","Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"1/4\" - 2\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"2.0625\" - 11.75\"","Shank-Sizes":"0.375\" - 2\"","Friendly Name":"455","CategoryBrand":"OSG"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20460/End_Mills_-_End_Mill_-_Roughing_Cut_-_List_460_-_Roughing_End_Mills_-_Catalog"],"Overall Length - Inch (L)":["3.25","4","3.75","2.5","4.625","2.875","3.875","5.25","3.5","4.5","6.5","5.5"],"Number of Flutes":["4","5","6"],"Diameter - Fractional Size (D)":["1/2","5/8","7/16","3/4","1","1-1/4","1-1/2"],"Diameter - Inch (D)":["0.5","0.625","0.4375","0.75","1","1.25","1.5"],"Helix Angle - Degree":"30","Length of Cut - Inch (Lc)":["1.25","2","1.625","0.5","2.5","0.75","3","1","4"],"Shank Diameter - Inch (d)":["0.5","0.625","0.75","1","1.25"],"Web Literature 4":"800388CA","Substrate":"HSS-CO","Stainless Steels : 400":"M; Good","Web Literature 1":"8002024CA-EM,177|8002024CA-EMT,87","Notes":"Other coatings available upon request.","Surface Treatment":"BRIGHT","Units":"Inch","Hardened Steels : 35 HRC":"H; Good","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":"Center Cutting","Cast Iron":"K; Good","List Name":"COBALT HSS ROUGHER SQ","Full Description":"Cobalt-HSS Roughing Cut End Mills for Ferrous and Non-Ferrous Materials","Short Description":"Cobalt-HSS Roughing Cut End Mills for Ferrous and Non-Ferrous Materials","Alloy Steels : 4140; 4340":"P; Good","Stainless Steels : 300":"M; Best","Die Steels":"P; Good","High Carbon Steel : 1065":"P; Good","Stainless Steels : 17-4PH":"M; Good","Low Carbon Steel : 1010; 1018":"P; Good","View Speed and Feed Page":"Here","View Catalog Page":"Here","Aluminum : Casting":"N; Good","Product Overview":"Multiple Flute, HSS-Co, Fine Pitch, Regular, Roughing Cut","Coolant Thru":"No","Medium Carbon Steel : 1035; 1045":"P; Good","Weldon Flat":"Yes","Mill Type":"Single End","End Cut Type":"Square End","Length of Cut - Specification":["REGULAR","LONG","STUB"],"Cutting Direction":"RH","Helix Direction":"RH","Type (feature)":"Roughing, Fine Pitch","Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"7/16\" - 1.5\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"2.5\" - 6.5\"","Shank-Sizes":"0.5\" - 1.25\"","Friendly Name":"460","CategoryBrand":"OSG"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20462/End_Mills_-_End_Mill_-_Carbide_-_List_462_-_Standard_Square_Corner_Radius_-_Catalog"],"Overall Length - Inch (L)":["5","2.25","3","4"],"Number of Flutes":"2","Shank Diameter - Inch (d)":["1","0.125","0.1875","0.25","0.3125","0.375","0.4375","0.5","0.625","0.75"],"Cutting Diameter Tolerance - Inch":"+0 / -0.002","Diameter - Fractional Size (D)":["1","1/8","3/16","1/4","5/16","3/8","7/16","1/2","5/8","3/4"],"Product Overview":"2 Flute, Long Length","Diameter - Inch (D)":["1","0.125","0.1875","0.25","0.3125","0.375","0.4375","0.5","0.625","0.75"],"Helix Angle - Degree":"30","Length of Cut - Inch (Lc)":["2.25","0.75","1.125","2","1"],"Web Literature 4":"800388CA","Stainless Steels : 300":"M; Good","Web Literature 1":"8002024CA-EM,135|8002024CA-EMT,68","Notes":"Other coatings available upon request.","Surface Treatment":["BRIGHT","TiAlN","TiCN"],"Units":["Inch","Metric"],"Substrate":"Carbide","Hardened Steels : 35 HRC":"H; Good","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":"Center Cutting","Cast Iron":"K; Good","Hardened Steels : 45-50 HRC":"H; Good","Alloy Steels : 4140; 4340":"P; Good","Die Steels":"P; Good","High Carbon Steel : 1065":"P; Good","Low Carbon Steel : 1010; 1018":"P; Good","View Speed and Feed Page":"Here","View Catalog Page":"Here","Stainless Steels : 400":"M; Good","Aluminum : Casting":"N; Good","Weldon Flat":"No","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Good","Medium Carbon Steel : 1035; 1045":"P; Good","Mill Type":"Single End","End Cut Type":"Square End","Length of Cut - Specification":["REGULAR","EXTRA LONG","LONG"],"Full Description":"Standard Carbide End Mills for General Milling Applications","Short Description":"Standard Carbide End Mills for General Milling Applications","List Name":"STANDARD CARBIDE SQ","Cutting Direction":"RH","Helix Direction":"RH","Length of Cut - Metric (Lc)":["19","25","28","29","32","51","57"],"Diameter - Metric (D)":["3","4","5","6","8","10","12","14","16","18","20","25"],"Shank Diameter - Metric (d)":["3","4","5","6","8","10","12","14","16","18","20","25"],"Overall Length - Metric (L)":["57","64","76","102","127"],"Cutting Diameter Tolerance - Metric":"+0 / -0.050","Diameter-Sizes":"3mm - 1\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"57mm - 127mm","Shank-Sizes":"3mm - 1\"","Friendly Name":"462","CategoryBrand":"OSG"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20464/End_Mills_-_End_Mill_-_Carbide_-_List_464_-_Standard_Square_Corner_Raidus_-_Catalog"],"Number of Flutes":"4","Overall Length - Inch (L)":["5","2.25","3","4"],"Shank Diameter - Inch (d)":["1","0.125","0.1875","0.25","0.3125","0.375","0.4375","0.5","0.625","0.75"],"Cutting Diameter Tolerance - Inch":"+0 / -0.002","Diameter - Fractional Size (D)":["1","1/8","3/16","1/4","5/16","3/8","7/16","1/2","5/8","3/4"],"Diameter - Inch (D)":["1","0.125","0.1875","0.25","0.3125","0.375","0.4375","0.5","0.625","0.75"],"Helix Angle - Degree":"30","Length of Cut - Inch (Lc)":["2.25","0.75","1.125","2","1"],"Product Overview":"4 Flute, Long Length","Web Literature 4":"800388CA","Stainless Steels : 300":"M; Good","Web Literature 1":"8002024CA-EM,136|8002024CA-EMT,72","Notes":"Other coatings available upon request.","Surface Treatment":["BRIGHT","TiCN","TiAlN"],"Units":["Inch","Metric"],"Substrate":"Carbide","Hardened Steels : 35 HRC":"H; Good","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":"Center Cutting","Cast Iron":"K; Good","Hardened Steels : 45-50 HRC":"H; Good","Hardened Steels : 50-70 HRC":"H; Good","Alloy Steels : 4140; 4340":"P; Good","Die Steels":"P; Good","High Carbon Steel : 1065":"P; Good","Low Carbon Steel : 1010; 1018":"P; Good","View Speed and Feed Page":"Here","View Catalog Page":"Here","Stainless Steels : 400":"M; Good","Aluminum : Casting":"N; Good","Weldon Flat":"No","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Good","Medium Carbon Steel : 1035; 1045":"P; Good","Mill Type":"Single End","End Cut Type":"Square End","Length of Cut - Specification":["REGULAR","EXTRA LONG","LONG"],"Full Description":"Standard Carbide End Mills for General Milling Applications","Short Description":"Standard Carbide End Mills for General Milling Applications","List Name":"STANDARD CARBIDE SQ","Cutting Direction":"RH","Helix Direction":"RH","Length of Cut - Metric (Lc)":["19","25","28","29","32","51","57"],"Diameter - Metric (D)":["3","4","5","6","8","10","12","14","16","18","20","25"],"Shank Diameter - Metric (d)":["3","4","5","6","8","10","12","14","16","18","20","25"],"Overall Length - Metric (L)":["57","64","76","102","127"],"Cutting Diameter Tolerance - Metric":"+0 / -0.050","Diameter-Sizes":"3mm - 1\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"57mm - 127mm","Shank-Sizes":"3mm - 1\"","Friendly Name":"464","CategoryBrand":"OSG"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20470/End_Mills_-_End_Mill_-_Roughing_Cut_-_List_470_-_Roughing_End_Mills_-_Catalog"],"Number of Flutes":["4","5","6","8"],"Diameter - Fractional Size (D)":["1/2","3/8","5/8","3/4","7/8","1/4","5/16","1","1-1/8","1-1/4","1-1/2","2"],"Diameter - Inch (D)":["0.5","0.375","0.625","0.75","0.875","0.25","0.3125","1","1.125","1.25","1.5","2"],"Helix Angle - Degree":"25","Length of Cut - Inch (Lc)":["0.5","1.25","1.5","2","1.625","2.5","2.25","3","1.875","3.5","0.75","0.375","0.875","1","4","5","6","8"],"Overall Length - Inch (L)":["2.5","3.25","4","3.75","4.125","4.625","3.875","4.5","5.25","5.75","2.15625","2.625","3.5","4.25","6.5","5.5","7.5","7.75","9.75","11.75","6.75"],"Shank Diameter - Inch (d)":["0.5","0.375","0.625","0.75","0.875","1","1.25","2"],"Web Literature 4":"800388CA","Stainless Steels : 300":"M; Good","Substrate":"HSS-CO","Web Literature 1":"8002024CA-EM,181|8002024CA-EMT,90","Surface Treatment":"BRIGHT","Notes":"Other coatings available upon request. 2\" diameter shanks have combination drive.","Units":"Inch","Hardened Steels : 35 HRC":"H; Good","Cutting Type":"Center Cutting","Cast Iron":"K; Good","List Name":"COBALT HSS CC-RFE","Full Description":"Cobalt-HSS Roughing Cut End Mills for Ferrous and Non-Ferrous Materials","Short Description":"Cobalt-HSS Roughing Cut End Mills for Ferrous and Non-Ferrous Materials","Alloy Steels : 4140; 4340":"P; Good","Die Steels":"P; Good","Stainless Steels : 17-4PH":"M; Good","High Carbon Steel : 1065":"P; Good","Low Carbon Steel : 1010; 1018":"P; Good","View Speed and Feed Page":"Here","View Catalog Page":"Here","Stainless Steels : 400":"M; Good","Aluminum : Casting":"N; Good","Product Overview":"Multiple Flute, HSS-Co, Rough & Finish Cut","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Good","Medium Carbon Steel : 1035; 1045":"P; Good","Weldon Flat":"Yes","Mill Type":"Single End","End Cut Type":"Square End","Cutting Direction":"RH","Length of Cut - Specification":["STUB","REGULAR","LONG"],"Helix Direction":"RH","Type (feature)":"Roughing, Finishing","Diameter-Sizes":"1/4\" - 2\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"2.15625\" - 11.75\"","Shank-Sizes":"0.375\" - 2\"","Friendly Name":"470","CategoryBrand":"OSG"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20482/End_Mills_-_End_Mill_-_Carbide_-_List_482_-_Standard_Square_Corner_Radius"],"Number of Flutes":"2","Overall Length - Inch (L)":["6","3","4"],"Shank Diameter - Inch (d)":["1","0.125","0.1875","0.25","0.3125","0.375","0.4375","0.5","0.625","0.75"],"Cutting Diameter Tolerance - Inch":"+0 / -0.002","Diameter - Fractional Size (D)":["1","1/8","3/16","1/4","5/16","3/8","7/16","1/2","5/8","3/4"],"Product Overview":"2 Flute, Extra Long Length","Diameter - Inch (D)":["1","0.125","0.1875","0.25","0.3125","0.375","0.4375","0.5","0.625","0.75"],"Helix Angle - Degree":"30","Length of Cut - Inch (Lc)":["3","1","1.125","1.5","1.625","1.75"],"Web Literature 4":"800388CA","Web Literature 1":"8002024CA-EM,137|8002024CA-EMT,68","Notes":"Other coatings available upon request.","Surface Treatment":["BRIGHT","TiAlN","TiCN"],"Units":["Inch","Metric"],"Substrate":"Carbide","Hardened Steels : 35 HRC":"H; Good","Cutting Type":"Center Cutting","Cast Iron":"K; Good","High Carbon Steel : 1065":"P; Good","Low Carbon Steel : 1010; 1018":"P; Good","View Speed and Feed Page":"Here","View Catalog Page":"Here","Aluminum : Casting":"N; Good","Weldon Flat":"No","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Good","Medium Carbon Steel : 1035; 1045":"P; Good","Mill Type":"Single End","End Cut Type":"Square End","Length of Cut - Specification":["REGULAR","EXTRA LONG","LONG"],"Full Description":"Standard Carbide End Mills for General Milling Applications","Short Description":"Standard Carbide End Mills for General Milling Applications","List Name":"STANDARD CARBIDE SQ","Cutting Direction":"RH","Helix Direction":"RH","Diameter - Metric (D)":["3","4","5","6","8","10","12","14","16","18","20","25"],"Length of Cut - Metric (Lc)":["25","28","32","38","42","45","76"],"Shank Diameter - Metric (d)":["3","4","5","6","8","10","12","14","16","18","20","25"],"Overall Length - Metric (L)":["76","102","153"],"Cutting Diameter Tolerance - Metric":"+0 / -0.050","Diameter-Sizes":"3mm - 1\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"76mm - 153mm","Shank-Sizes":"3mm - 1\"","Friendly Name":"482","CategoryBrand":"OSG"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20484/End_Mills_-_End_Mill_-_Carbide_-_List_484_-_Standard_Square_Corner_Radius_-_Catalog"],"Number of Flutes":"4","Overall Length - Inch (L)":["6","3","4"],"Shank Diameter - Inch (d)":["1","0.125","0.1875","0.25","0.3125","0.375","0.4375","0.5","0.625","0.75"],"Cutting Diameter Tolerance - Inch":"+0 / -0.002","Diameter - Fractional Size (D)":["1","1/8","3/16","1/4","5/16","3/8","7/16","1/2","5/8","3/4"],"Diameter - Inch (D)":["1","0.125","0.1875","0.25","0.3125","0.375","0.4375","0.5","0.625","0.75"],"Helix Angle - Degree":"30","Length of Cut - Inch (Lc)":["3","1","1.125","1.5","1.625","1.75","2"],"Product Overview":"4 Flute, Extra Long Length","Web Literature 4":"800388CA","Stainless Steels : 300":"M; Good","Web Literature 1":["8002024CA-EM,139|8002024CA-EMT,72","8002024CA-EM,138|8002024CA-EMT,72"],"Notes":"Other coatings available upon request.","Surface Treatment":["BRIGHT","TiCN","TiAlN"],"Units":["Inch","Metric"],"Substrate":"Carbide","Hardened Steels : 35 HRC":"H; Good","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":"Center Cutting","Cast Iron":"K; Good","Alloy Steels : 4140; 4340":"P; Good","Die Steels":"P; Good","High Carbon Steel : 1065":"P; Good","Low Carbon Steel : 1010; 1018":"P; Good","View Speed and Feed Page":"Here","View Catalog Page":"Here","Stainless Steels : 400":"M; Good","Aluminum : Casting":"N; Good","Weldon Flat":"No","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Good","Medium Carbon Steel : 1035; 1045":"P; Good","Mill Type":"Single End","End Cut Type":"Square End","Length of Cut - Specification":["REGULAR","EXTRA LONG","LONG"],"Full Description":"Standard Carbide End Mills for General Milling Applications","Short Description":"Standard Carbide End Mills for General Milling Applications","List Name":"STANDARD CARBIDE SQ","Cutting Direction":"RH","Helix Direction":"RH","Diameter - Metric (D)":["3","4","5","6","8","10","12","14","16","18","20","25"],"Length of Cut - Metric (Lc)":["25","28","32","38","42","45","76"],"Shank Diameter - Metric (d)":["3","4","5","6","8","10","12","14","16","18","20","25"],"Overall Length - Metric (L)":["76","102","153"],"Cutting Diameter Tolerance - Metric":"+0 / -0.050","Diameter-Sizes":"3mm - 1\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"76mm - 153mm","Shank-Sizes":"3mm - 1\"","Friendly Name":"484","CategoryBrand":"OSG"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20490/End_Mills_-_End_Mill_-_Roughing_Cut_-_List_490_-_Roughing_End_Mills"],"Overall Length - Inch (L)":["3.25","4","3.75","4.125","4.625","5.125","3.875","5.25","4.5","5.75","2.4375","2.5","3.0625","3.125","2.625","2.6875","4.25","5.5","6.5","6.25","7.5","6.75","7.75","9.75","11.75"],"Number of Flutes":["4","5","6","8"],"Diameter - Fractional Size (D)":["1/2","5/8","3/4","7/8","1/4","5/16","3/8","7/16","1","1-1/8","1-1/4","1-1/2","1-3/4","2"],"Diameter - Inch (D)":["0.5","0.625","0.75","0.875","0.25","0.3125","0.375","0.4375","1","1.125","1.25","1.5","1.75","2"],"Length of Cut - Inch (Lc)":["1.25","2","1.625","2.5","3","2.25","1.875","3.5","0.625","0.75","1.375","0.875","1.5","1","4","5","6","8"],"Helix Angle - Degree":"30","Shank Diameter - Inch (d)":["0.5","0.625","0.75","0.875","0.375","1","1.25","2"],"Web Literature 4":"800388CA","Stainless Steels : 300":"M; Good","Substrate":"HSS-CO","Web Literature 1":"8002024CA-EM,180|8002024CA-EMT,88","Surface Treatment":"BRIGHT","Notes":"Other coatings available upon request. 2\" diameter shanks have combination drive.","Units":"Inch","Hardened Steels : 35 HRC":"H; Good","Cast Iron":"K; Good","List Name":"COBALT HSS ROUGHER SQ","Full Description":"Cobalt-HSS Roughing Cut End Mills for Ferrous and Non-Ferrous Materials","Short Description":"Cobalt-HSS Roughing Cut End Mills for Ferrous and Non-Ferrous Materials","Alloy Steels : 4140; 4340":"P; Good","Die Steels":"P; Good","Stainless Steels : 17-4PH":"M; Good","High Carbon Steel : 1065":"P; Good","Low Carbon Steel : 1010; 1018":"P; Good","View Speed and Feed Page":"Here","View Catalog Page":"Here","Stainless Steels : 400":"M; Good","Aluminum : Casting":"N; Good","Product Overview":"Multiple Flute, HSS-Co, Regular Pitch, Roughing Cut","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Good","Cutting Type":"Non-Center Cutting","Medium Carbon Steel : 1035; 1045":"P; Good","Weldon Flat":"Yes","Mill Type":"Single End","End Cut Type":"Square End","Length of Cut - Specification":["REGULAR","LONG","STUB"],"Cutting Direction":"RH","Helix Direction":"RH","Type (feature)":"Roughing","Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"1/4\" - 2\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"2.4375\" - 11.75\"","Shank-Sizes":"0.375\" - 2\"","Friendly Name":"490","CategoryBrand":"OSG"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20520/End_Mills_-_End_Mill_-_Single_End_Mills_-_List_520_-_Catalog"],"Number of Flutes":"2","Diameter - Inch (D)":["0.125","0.1875","0.25","0.3125","0.375","0.4375","0.5","0.5625","0.625","0.6875","0.75","0.53125","0.59375","0.65625","0.71875","0.8125","0.875","0.9375","1","0.78125","0.84375","0.90625","0.96875","1.125","1.25","1.375","1.5","1.75","2","0.15625","0.21875","0.28125","0.34375","0.40625","0.46875"],"Cutting Diameter Tolerance - Inch":"+0.003 / -0","Diameter - Fractional Size (D)":["1/8","3/16","1/4","5/16","3/8","7/16","1/2","9/16","5/8","11/16","3/4","17/32","19/32","21/32","23/32","13/16","7/8","15/16","1","25/32","27/32","29/32","31/32","1-1/8","1-1/4","1-3/8","1-1/2","1-3/4","2","5/32","7/32","9/32","11/32","13/32","15/32"],"Product Overview":"2 Flute, HSS-Co, Regular Length","Length of Cut - Inch (Lc)":["0.375","0.4375","0.5","0.5625","0.8125","1","1.125","1.3125","1.5","1.625","2"],"Overall Length - Inch (L)":["2.3125","2.5","3","3.125","3.3125","3.4375","3.625","3.5625","3.75","3.875","4.125","5.75"],"Helix Angle - Degree":"30","Shank Diameter - Inch (d)":["0.375","0.5","0.625","0.75","0.875","1","1.25","2"],"Web Literature 4":"800388CA","Stainless Steels : 300":"M; Good","Substrate":"HSS-CO","Web Literature 1":"8002024CA-EM,154|8002024CA-EMT,74","Surface Treatment":["BRIGHT","TiN"],"Notes":"Other coatings available upon request. 2\" diameter shanks have combination drive.","Units":"Inch","Hardened Steels : 35 HRC":"H; Good","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":"Center Cutting","Cast Iron":"K; Good","Low Carbon Steel : 1010; 1018":"P; Best","List Name":"COBALT HSS SQ","Medium Carbon Steel : 1035; 1045":"P; Best","Alloy Steels : 4140; 4340":"P; Good","Full Description":"High Performance Cobalt HSS End Mills for General Milling Applications","Short Description":"High Performance Cobalt HSS End Mills for General Milling Applications","Die Steels":"P; Good","Stainless Steels : 17-4PH":"M; Good","High Carbon Steel : 1065":"P; Good","View Speed and Feed Page":"Here","View Catalog Page":"Here","Stainless Steels : 400":"M; Good","Aluminum : Casting":"N; Good","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Good","Weldon Flat":"Yes","Mill Type":"Single End","End Cut Type":"Square End","Length of Cut - Specification":["REGULAR","STUB"],"Cutting Direction":"RH","Helix Direction":"RH","Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"1/8\" - 2\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"2.3125\" - 5.75\"","Shank-Sizes":"0.375\" - 2\"","Friendly Name":"520","CategoryBrand":"OSG"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20522/End_Mills_-_End_Mill_-_Double_End_Mills_-_List_522_-_Catalog"],"Overall Length - Inch (L)":["3.0625","3.125","3.75","4.5","5","5.5","5.875"],"Number of Flutes":"2","Diameter - Inch (D)":["0.125","0.1875","0.25","0.3125","0.375","0.5","0.625","0.75","0.875","1","0.140625","0.171875","0.203125","0.234375","0.265625","0.296875","0.328125","0.359375","0.390625","0.421875","0.453125","0.484375","0.53125","0.59375","0.65625","0.71875","0.78125","0.8125","0.84375","0.90625","0.9375","0.96875","0.15625","0.21875","0.28125","0.34375","0.40625","0.4375","0.46875","0.5625","0.6875"],"Diameter - Fractional Size (D)":["1/8","3/16","1/4","5/16","3/8","1/2","5/8","3/4","7/8","1","9/64","11/64","13/64","15/64","17/64","19/64","21/64","23/64","25/64","27/64","29/64","31/64","17/32","19/32","21/32","23/32","25/32","13/16","27/32","29/32","15/16","31/32","5/32","7/32","9/32","11/32","13/32","7/16","15/32","9/16","11/16"],"Product Overview":"2 Flute, HSS-Co, Regular Length, Two Flute","Length of Cut - Inch (Lc)":["0.375","0.4375","0.5","0.5625","0.8125","1.125","1.3125","1.5625","1.625"],"Helix Angle - Degree":"30","Shank Diameter - Inch (d)":["0.375","0.5","0.625","0.75","0.875","1"],"Web Literature 4":"800388CA","Stainless Steels : 300":"M; Good","Substrate":"HSS-CO","Web Literature 1":["8002024CA-EM,182|8002024CA-EMT,74","8002024CA-EM,183|8002024CA-EMT,74"],"Notes":"Other coatings available upon request.","Surface Treatment":["BRIGHT","TiN"],"Units":"Inch","Hardened Steels : 35 HRC":"H; Good","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":"Center Cutting","Cast Iron":"K; Good","Low Carbon Steel : 1010; 1018":"P; Best","List Name":"COBALT HSS DOUBLE END SQ","Medium Carbon Steel : 1035; 1045":"P; Best","Alloy Steels : 4140; 4340":"P; Good","Mill Type":"Double End","Full Description":"High Performance Cobalt HSS End Mills for General Milling Applications","Short Description":"High Performance Cobalt HSS End Mills for General Milling Applications","Die Steels":"P; Good","Stainless Steels : 17-4PH":"M; Good","High Carbon Steel : 1065":"P; Good","View Speed and Feed Page":"Here","View Catalog Page":"Here","Stainless Steels : 400":"M; Good","Aluminum : Casting":"N; Good","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Good","Weldon Flat":"Yes","End Cut Type":"Square End","Length of Cut - Specification":["REGULAR","STUB","LONG"],"Cutting Direction":"RH","Helix Direction":"RH","Cutting Diameter Tolerance - Inch":"+0 / -0.0011","Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"1/8\" - 1\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"3.0625\" - 5.875\"","Shank-Sizes":"0.375\" - 1\"","Friendly Name":"522","CategoryBrand":"OSG"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20525/End_Mills_-_End_Mill_-_Single_End_Mills_-_List_525_-_Catalog"],"Overall Length - Inch (L)":["3.25","4","4.125","4.5","4.75","5.5","6.75"],"Number of Flutes":"2","Cutting Diameter Tolerance - Inch":"+0.0011 / -0","Diameter - Inch (D)":["0.375","0.5","0.625","0.75","0.875","1","1.125","1.25","1.5","1.75","2"],"Product Overview":"2 Flute, HSS-Co, Long Length, Two Flute, Non-Extension Type","Diameter - Fractional Size (D)":["3/8","1/2","5/8","3/4","7/8","1","1-1/8","1-1/4","1-1/2","1-3/4","2"],"Helix Angle - Degree":"30","Length of Cut - Inch (Lc)":["1.5","2","2.25","2.5","3"],"Shank Diameter - Inch (d)":["0.375","0.5","0.625","0.75","0.875","1","1.25","2"],"Web Literature 4":"800388CA","Stainless Steels : 300":"M; Good","Substrate":"HSS-CO","Web Literature 1":"8002024CA-EM,156|8002024CA-EMT,74","Surface Treatment":"BRIGHT","Notes":"Other coatings available upon request. 2\" diameter shanks have combination drive.","Units":"Inch","Hardened Steels : 35 HRC":"H; Good","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":"Center Cutting","Cast Iron":"K; Good","Low Carbon Steel : 1010; 1018":"P; Best","Length of Cut - Specification":["LONG","REGULAR","STUB"],"List Name":"COBALT HSS EDL","Medium Carbon Steel : 1035; 1045":"P; Best","Alloy Steels : 4140; 4340":"P; Good","Full Description":"High Performance Cobalt HSS End Mills for General Milling Applications","Short Description":"High Performance Cobalt HSS End Mills for General Milling Applications","Die Steels":"P; Good","Stainless Steels : 17-4PH":"M; Good","High Carbon Steel : 1065":"P; Good","View Speed and Feed Page":"Here","View Catalog Page":"Here","Stainless Steels : 400":"M; Good","Aluminum : Casting":"N; Good","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Good","Weldon Flat":"Yes","Mill Type":"Single End","End Cut Type":"Square End","Cutting Direction":"RH","Helix Direction":"RH","Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"3/8\" - 2\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"3.25\" - 6.75\"","Shank-Sizes":"0.375\" - 2\"","Friendly Name":"525","CategoryBrand":"OSG"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20527/End_Mills_-_End_Mill_-_Single_End_Mills_-_List_527_-_Catalog"],"Number of Flutes":"2","Neck Length - Inch (L1)":["0.8125","1.125","1.5","1.75","2.25","2.75","3.375","4","5"],"Diameter - Inch (D)":["0.125","0.1875","0.25","0.3125","0.375","0.5","0.625","0.75","0.875","1","1.25"],"Cutting Diameter Tolerance - Inch":"+0.0011 / -0","Diameter - Fractional Size (D)":["1/8","3/16","1/4","5/16","3/8","1/2","5/8","3/4","7/8","1","1-1/4"],"Product Overview":"2 Flute, HSS-Co, Extension Type, Two Flute, Extension Type","Length of Cut - Inch (Lc)":["0.375","0.5","0.625","0.75","1","1.375","1.625","2","2.5","3"],"Overall Length - Inch (L)":["2.375","2.6875","3.0625","3.3125","4","4.625","5.375","6","7.25"],"Helix Angle - Degree":"30","Shank Diameter - Inch (d)":["0.375","0.5","0.625","0.75","0.875","1","1.25"],"Web Literature 4":"800388CA","Stainless Steels : 300":"M; Good","Substrate":"HSS-CO","Web Literature 1":"8002024CA-EM,157|8002024CA-EMT,74","Notes":"Other coatings available upon request.","Surface Treatment":"BRIGHT","Units":"Inch","Hardened Steels : 35 HRC":"H; Good","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":"Center Cutting","Cast Iron":"K; Good","Low Carbon Steel : 1010; 1018":"P; Best","List Name":"COBALT HSS LS-EDS","Medium Carbon Steel : 1035; 1045":"P; Best","Alloy Steels : 4140; 4340":"P; Good","Full Description":"High Performance Cobalt HSS End Mills for General Milling Applications","Short Description":"High Performance Cobalt HSS End Mills for General Milling Applications","Die Steels":"P; Good","Stainless Steels : 17-4PH":"M; Good","High Carbon Steel : 1065":"P; Good","View Speed and Feed Page":"Here","View Catalog Page":"Here","Stainless Steels : 400":"M; Good","Aluminum : Casting":"N; Good","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Good","Weldon Flat":"Yes","Mill Type":"Single End","Type (feature)":"Reduced Neck","End Cut Type":"Square End","Length of Cut - Specification":"REGULAR","Cutting Direction":"RH","Helix Direction":"RH","Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"1/8\" - 1.25\"","Flute-Sizes":"-","Neck-Sizes":"0.8125\" - 5\"","Taper-Sizes":"-","Overall-Sizes":"2.375\" - 7.25\"","Shank-Sizes":"0.375\" - 1.25\"","Friendly Name":"527","CategoryBrand":"OSG"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20530/End_Mills_-_End_Mill_-_Single_End_Mills_-_List_530_-_Catalog"],"Number of Flutes":"2","Diameter - Inch (D)":["0.25","0.3125","0.375","0.4375","0.5","0.625","0.75","0.875","1","1.25","1.5","1.75","2"],"Cutting Diameter Tolerance - Inch":"+0.0011 / -0","Diameter - Fractional Size (D)":["1/4","5/16","3/8","7/16","1/2","5/8","3/4","7/8","1","1-1/4","1-1/2","1-3/4","2"],"Product Overview":"2 Flute, HSS-Co, Regular Length Two Flute, High Helix, Center Cutting for Aluminum","Length of Cut - Inch (Lc)":["0.625","0.75","1","1.25","1.625","1.875","2"],"Overall Length - Inch (L)":["2.4375","2.5","2.6875","3.25","3.75","3.875","4.125","4.5"],"Shank Diameter - Inch (d)":["0.375","0.5","0.625","0.75","0.875","1","1.25"],"Helix Angle - Degree":"40","Web Literature 4":"800388CA","Stainless Steels : 300":"M; Good","Substrate":"HSS-CO","Web Literature 1":"8002024CA-EM,158|8002024CA-EMT,74","Notes":"Other coatings available upon request.","Surface Treatment":"BRIGHT","Units":"Inch","Cutting Type":"Center Cutting","List Name":"COBALT HSS AL-EDS","Full Description":"High Performance Cobalt HSS End Mills for General Milling Applications","Short Description":"High Performance Cobalt HSS End Mills for General Milling Applications","Low Carbon Steel : 1010; 1018":"P; Good","View Speed and Feed Page":"Here","View Catalog Page":"Here","Stainless Steels : 400":"M; Good","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Coolant Thru":"No","Weldon Flat":"Yes","Mill Type":"Single End","End Cut Type":"Square End","Length of Cut - Specification":["REGULAR","STUB"],"Cutting Direction":"RH","Helix Direction":"RH","Diameter-Sizes":"1/4\" - 2\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"2.4375\" - 4.5\"","Shank-Sizes":"0.375\" - 1.25\"","Friendly Name":"530","CategoryBrand":"OSG"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20531/End_Mills_-_End_Mill_-_Single_End_Multiple_Flute_-_List_531_-_Catalog"],"Number of Flutes":"3","Diameter - Inch (D)":["0.125","0.1875","0.25","0.3125","0.375","0.4375","0.5","0.5625","0.625","0.75","0.875","1","1.125","1.25","1.5","1.75","2"],"Cutting Diameter Tolerance - Inch":"+0.0011 / -0","Diameter - Fractional Size (D)":["1/8","3/16","1/4","5/16","3/8","7/16","1/2","9/16","5/8","3/4","7/8","1","1-1/8","1-1/4","1-1/2","1-3/4","2"],"Product Overview":"3 Flute, HSS-Co, Regular Length","Length of Cut - Inch (Lc)":["0.375","0.5","0.625","0.75","1","1.25","1.375","1.625","1.875","2"],"Overall Length - Inch (L)":["2.3125","2.375","2.4375","2.5","2.6875","3.25","3.375","3.625","3.75","4","3.875","4.125","4.5"],"Helix Angle - Degree":"30","Shank Diameter - Inch (d)":["0.375","0.5","0.625","0.75","0.875","1","1.25"],"Web Literature 4":"800388CA","Stainless Steels : 300":"M; Good","Substrate":"HSS-CO","Web Literature 1":"8002024CA-EM,160|8002024CA-EMT,83","Notes":"Other coatings available upon request.","Surface Treatment":"BRIGHT","Alloy Steels : 4140; 4340":"P; Best","Units":"Inch","Die Steels":"P; Best","Hardened Steels : 35 HRC":"H; Good","High Carbon Steel : 1065":"P; Best","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":"Center Cutting","Cast Iron":"K; Good","Low Carbon Steel : 1010; 1018":"P; Best","List Name":"COBALT HSS ETS","Medium Carbon Steel : 1035; 1045":"P; Best","Full Description":"High Performance Cobalt HSS End Mills for General Milling Applications","Short Description":"High Performance Cobalt HSS End Mills for General Milling Applications","Stainless Steels : 17-4PH":"M; Good","View Speed and Feed Page":"Here","View Catalog Page":"Here","Stainless Steels : 400":"M; Good","Aluminum : Casting":"N; Good","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Good","Weldon Flat":"Yes","Mill Type":"Single End","End Cut Type":"Square End","Length of Cut - Specification":["REGULAR","STUB"],"Cutting Direction":"RH","Helix Direction":"RH","Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"1/8\" - 2\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"2.3125\" - 4.5\"","Shank-Sizes":"0.375\" - 1.25\"","Friendly Name":"531","CategoryBrand":"OSG"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20532/End_Mills_-_End_Mill_-_Double_End_Mills_-_List_532_-_Catalog"],"Number of Flutes":"3","Overall Length - Inch (L)":["3.0625","3.25","3.375","3.5","4.125","5","5.625","6.125","6.375"],"Diameter - Inch (D)":["0.125","0.1875","0.25","0.3125","0.375","0.5","0.625","0.75","0.875","1","0.4375","0.5625"],"Cutting Diameter Tolerance - Inch":["+0.0011 / -0","-0.0004 / -0.0015"],"Diameter - Fractional Size (D)":["1/8","3/16","1/4","5/16","3/8","1/2","5/8","3/4","7/8","1","7/16","9/16"],"Product Overview":"3 Flute, HSS-Co, Regular Length","Length of Cut - Inch (Lc)":["0.375","0.5","0.625","0.75","1","1.375","1.625","1.875"],"Helix Angle - Degree":"30","Shank Diameter - Inch (d)":["0.375","0.5","0.625","0.75","0.875","1"],"Web Literature 4":"800388CA","Stainless Steels : 300":"M; Good","Substrate":"HSS-CO","Web Literature 1":"8002024CA-EM,185|8002024CA-EMT,83","Notes":"Other coatings available upon request.","Surface Treatment":"BRIGHT","Alloy Steels : 4140; 4340":"P; Best","Units":"Inch","Die Steels":"P; Best","Hardened Steels : 35 HRC":"H; Good","High Carbon Steel : 1065":"P; Best","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":"Center Cutting","Cast Iron":"K; Good","Low Carbon Steel : 1010; 1018":"P; Best","List Name":"COBALT HSS DOUBLE END TDE","Medium Carbon Steel : 1035; 1045":"P; Best","Mill Type":"Double End","Full Description":"High Performance Cobalt HSS End Mills for General Milling Applications","Short Description":"High Performance Cobalt HSS End Mills for General Milling Applications","Stainless Steels : 17-4PH":"M; Good","View Speed and Feed Page":"Here","View Catalog Page":"Here","Stainless Steels : 400":"M; Good","Aluminum : Casting":"N; Good","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Good","Weldon Flat":"Yes","End Cut Type":"Square End","Length of Cut - Specification":["REGULAR","STUB"],"Cutting Direction":"RH","Helix Direction":"RH","Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"1/8\" - 1\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"3.0625\" - 6.375\"","Shank-Sizes":"0.375\" - 1\"","Friendly Name":"532","CategoryBrand":"OSG"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20535/End_Mills_-_End_Mill_-_Single_End_Mills_-_List_535_-_Catalog"],"Overall Length - Inch (L)":["3.0625","3.125","3.25","3.75","4","4.625","5.25","6.5"],"Number of Flutes":"2","Diameter - Inch (D)":["0.25","0.3125","0.375","0.4375","0.5","0.625","0.75","1","1.25","1.5","2"],"Cutting Diameter Tolerance - Inch":"+0.0011 / -0","Diameter - Fractional Size (D)":["1/4","5/16","3/8","7/16","1/2","5/8","3/4","1","1-1/4","1-1/2","2"],"Product Overview":"2 Flute, HSS-Co, Long Length, High Helix","Length of Cut - Inch (Lc)":["1.25","1.375","1.5","1.75","2","2.5","3","4"],"Shank Diameter - Inch (d)":["0.375","0.5","0.625","0.75","1","1.25"],"Helix Angle - Degree":"40","Web Literature 4":"800388CA","Stainless Steels : 300":"M; Good","Substrate":"HSS-CO","Web Literature 1":"8002024CA-EM,159|8002024CA-EMT,74","Notes":"Other coatings available upon request.","Surface Treatment":"BRIGHT","Units":"Inch","Cutting Type":"Center Cutting","Length of Cut - Specification":["LONG","REGULAR"],"List Name":"COBALT HSS AL-EDL","Full Description":"High Performance Cobalt HSS End Mills for Aluminum","Short Description":"High Performance Cobalt HSS End Mills for Aluminum","Low Carbon Steel : 1010; 1018":"P; Good","View Speed and Feed Page":"Here","View Catalog Page":"Here","Stainless Steels : 400":"M; Good","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Coolant Thru":"No","Weldon Flat":"Yes","Mill Type":"Single End","End Cut Type":"Square End","Cutting Direction":"RH","Helix Direction":"RH","Diameter-Sizes":"1/4\" - 2\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"3.0625\" - 6.5\"","Shank-Sizes":"0.375\" - 1.25\"","Friendly Name":"535","CategoryBrand":"OSG"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20536/End_Mills_-_End_Mill_-_Single_End_Multiple_Flute_-_List_536_-_Catalog"],"Number of Flutes":"3","Overall Length - Inch (L)":["3.0625","3.125","3.25","3.75","4","4.625","5.25","5.75","6.5"],"Diameter - Inch (D)":["0.25","0.3125","0.375","0.4375","0.5","0.625","0.75","0.875","1","1.25","1.5","2"],"Cutting Diameter Tolerance - Inch":"+0.0011 / -0","Diameter - Fractional Size (D)":["1/4","5/16","3/8","7/16","1/2","5/8","3/4","7/8","1","1-1/4","1-1/2","2"],"Product Overview":"3 Flute, HSS-Co, Long Length","Length of Cut - Inch (Lc)":["1.25","1.375","1.5","1.75","2","2.5","3","3.5","4"],"Helix Angle - Degree":"30","Shank Diameter - Inch (d)":["0.375","0.5","0.625","0.75","0.875","1","1.25"],"Web Literature 4":"800388CA","Stainless Steels : 300":"M; Good","Substrate":"HSS-CO","Web Literature 1":"8002024CA-EM,162|8002024CA-EMT,83","Notes":"Other coatings available upon request.","Surface Treatment":"BRIGHT","Alloy Steels : 4140; 4340":"P; Best","Units":"Inch","Die Steels":"P; Best","Hardened Steels : 35 HRC":"H; Good","High Carbon Steel : 1065":"P; Best","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":"Center Cutting","Cast Iron":"K; Good","Low Carbon Steel : 1010; 1018":"P; Best","Length of Cut - Specification":["LONG","REGULAR"],"List Name":"COBALT HSS ETL","Medium Carbon Steel : 1035; 1045":"P; Best","Full Description":"High Performance Cobalt HSS End Mills for General Milling Applications","Short Description":"High Performance Cobalt HSS End Mills for General Milling Applications","Stainless Steels : 17-4PH":"M; Good","View Speed and Feed Page":"Here","View Catalog Page":"Here","Stainless Steels : 400":"M; Good","Aluminum : Casting":"N; Good","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Good","Weldon Flat":"Yes","Mill Type":"Single End","End Cut Type":"Square End","Cutting Direction":"RH","Helix Direction":"RH","Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"1/4\" - 2\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"3.0625\" - 6.5\"","Shank-Sizes":"0.375\" - 1.25\"","Friendly Name":"536","CategoryBrand":"OSG"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20540/End_Mills_-_End_Mill_-_Single_End_Multiple_Flute_-_List_540_-_Catalog"],"Number of Flutes":["4","6","8"],"Diameter - Inch (D)":["0.125","0.1875","0.25","0.3125","0.375","0.4375","0.5","0.5625","0.625","0.6875","0.75","0.53125","0.59375","0.65625","0.71875","0.8125","0.875","0.9375","1","0.78125","0.84375","0.90625","0.96875","1.125","1.25","1.375","1.5","1.75","2","0.15625","0.21875","0.28125","0.34375","0.40625","0.46875"],"Cutting Diameter Tolerance - Inch":"+0.003 / -0","Diameter - Fractional Size (D)":["1/8","3/16","1/4","5/16","3/8","7/16","1/2","9/16","5/8","11/16","3/4","17/32","19/32","21/32","23/32","13/16","7/8","15/16","1","25/32","27/32","29/32","31/32","1-1/8","1-1/4","1-3/8","1-1/2","1-3/4","2","5/32","7/32","9/32","11/32","13/32","15/32"],"Length of Cut - Inch (Lc)":["0.375","0.5","0.625","0.75","1","1.25","1.375","1.625","1.875","2","0.4375","0.5625","0.6875"],"Overall Length - Inch (L)":["2.3125","2.375","2.4375","2.5","2.6875","3.25","3.375","3.625","3.75","4","3.875","4.125","4.25","4.5","5.75"],"Helix Angle - Degree":"30","Shank Diameter - Inch (d)":["0.375","0.5","0.625","0.75","0.875","1","1.25","2"],"Web Literature 4":"800388CA","Stainless Steels : 300":"M; Good","Substrate":"HSS-CO","Product Overview":"HSS-Co, Regular Length, Multiple Flute","Web Literature 1":["8002024CA-EM,168|8002024CA-EMT,76","8002024CA-EM,169|8002024CA-EMT,76"],"Surface Treatment":["BRIGHT","TiN"],"Notes":"Other coatings available upon request. 2\" diameter shanks have combination drive.","Alloy Steels : 4140; 4340":"P; Best","Units":"Inch","Die Steels":"P; Best","Hardened Steels : 35 HRC":"H; Good","High Carbon Steel : 1065":"P; Best","Hardened Steels : 35-45 HRC":"H; Good","Cast Iron":"K; Good","Low Carbon Steel : 1010; 1018":"P; Best","List Name":"COBALT HSS SQ","Medium Carbon Steel : 1035; 1045":"P; Best","Full Description":"High Performance Cobalt HSS End Mills for General Milling Applications","Short Description":"High Performance Cobalt HSS End Mills for General Milling Applications","Stainless Steels : 17-4PH":"M; Good","View Speed and Feed Page":"Here","View Catalog Page":"Here","Stainless Steels : 400":"M; Good","Aluminum : Casting":"N; Good","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Good","Cutting Type":"Non-Center Cutting","Weldon Flat":"Yes","Mill Type":"Single End","End Cut Type":"Square End","Length of Cut - Specification":["REGULAR","STUB"],"Cutting Direction":"RH","Helix Direction":"RH","Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"1/8\" - 2\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"2.3125\" - 5.75\"","Shank-Sizes":"0.375\" - 2\"","Friendly Name":"540","CategoryBrand":"OSG"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20541/End_Mills_-_End_Mill_-_Single_End_Multiple_Flute_-_List_541_-_Catalog"],"Number of Flutes":["4","6"],"Diameter - Inch (D)":["0.125","0.1875","0.25","0.3125","0.375","0.4375","0.5","0.5625","0.625","0.6875","0.75","0.875","1","1.125","1.25","1.5","2"],"Cutting Diameter Tolerance - Inch":"+0.0011 / -0","Diameter - Fractional Size (D)":["1/8","3/16","1/4","5/16","3/8","7/16","1/2","9/16","5/8","11/16","3/4","7/8","1","1-1/8","1-1/4","1-1/2","2"],"Length of Cut - Inch (Lc)":["0.375","0.5","0.625","0.75","1.25","1.375","1.625","1.875","2","0.25"],"Overall Length - Inch (L)":["2.3125","2.375","2.4375","2.5","3.25","3.375","2.75","3.75","3","3.875","4.125","4.5","2.0625","2.125","5.75"],"Helix Angle - Degree":"30","Shank Diameter - Inch (d)":["0.375","0.5","0.625","0.75","0.875","1","1.25","2"],"Web Literature 4":"800388CA","Stainless Steels : 300":"M; Good","Substrate":"HSS-CO","Product Overview":"HSS-Co, Regular Length, Multiple Flute","Web Literature 1":["8002024CA-EM,163|8002024CA-EMT,76","8002024CA-EM,164|8002024CA-EMT,76"],"Notes":"Other coatings available upon request.","Surface Treatment":["BRIGHT","TiN","TiCN","TiAlN"],"Alloy Steels : 4140; 4340":"P; Best","Units":"Inch","Die Steels":"P; Best","Hardened Steels : 35 HRC":"H; Good","High Carbon Steel : 1065":"P; Best","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":"Center Cutting","Cast Iron":"K; Good","Low Carbon Steel : 1010; 1018":"P; Best","List Name":"COBALT HSS SQ","Medium Carbon Steel : 1035; 1045":"P; Best","Full Description":"High Performance Cobalt HSS End Mills for General Milling Applications","Short Description":"High Performance Cobalt HSS End Mills for General Milling Applications","Stainless Steels : 17-4PH":"M; Good","View Speed and Feed Page":"Here","View Catalog Page":"Here","Aluminum : 6061; 7075":"N; Good","Stainless Steels : 400":"M; Good","Aluminum : Casting":"N; Good","Coolant Thru":"No","Weldon Flat":"Yes","Mill Type":"Single End","End Cut Type":"Square End","Length of Cut - Specification":["REGULAR","STUB"],"Cutting Direction":"RH","Helix Direction":"RH","Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"1/8\" - 2\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"2.0625\" - 5.75\"","Shank-Sizes":"0.375\" - 2\"","Friendly Name":"541","CategoryBrand":"OSG"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20542/End_Mills_-_End_Mill_-_Double_End_Mills_-_List_542_-_Catalog"],"Overall Length - Inch (L)":["3.0625","3.25","3.375","3.5","4.125","5","5.625","6.125","6.375","3.125"],"Number of Flutes":"4","Diameter - Inch (D)":["0.125","0.1875","0.25","0.3125","0.375","0.5","0.625","0.75","0.875","1","0.140625","0.171875","0.203125","0.234375","0.265625","0.296875","0.328125","0.359375","0.390625","0.421875","0.453125","0.484375","0.53125","0.59375","0.65625","0.71875","0.78125","0.90625","0.8125","0.9375","0.96875","0.15625","0.21875","0.28125","0.34375","0.40625","0.4375","0.46875","0.5625","0.6875"],"Cutting Diameter Tolerance - Inch":["+0.0011 / -0","-0.0004 / -0.0015"],"Diameter - Fractional Size (D)":["1/8","3/16","1/4","5/16","3/8","1/2","5/8","3/4","7/8","1","9/64","11/64","13/64","15/64","17/64","19/64","21/64","23/64","25/64","27/64","29/64","31/64","17/32","19/32","21/32","23/32","25/32","29/32","13/16","15/16","31/32","5/32","7/32","9/32","11/32","13/32","7/16","15/32","9/16","11/16"],"Length of Cut - Inch (Lc)":["0.375","0.5","0.625","0.75","1","1.375","1.625","1.875","0.4375","0.5625","0.6875"],"Helix Angle - Degree":"30","Shank Diameter - Inch (d)":["0.375","0.5","0.625","0.75","0.875","1"],"Web Literature 4":"800388CA","Stainless Steels : 300":"M; Good","Substrate":"HSS-CO","Product Overview":"HSS-Co, Regular Length, Multiple Flute, Center Hole","Web Literature 1":"8002024CA-EM,186|8002024CA-EMT,76","Notes":"Other coatings available upon request.","Surface Treatment":["BRIGHT","TiN"],"Alloy Steels : 4140; 4340":"P; Best","Units":"Inch","Die Steels":"P; Best","Hardened Steels : 35 HRC":"H; Good","High Carbon Steel : 1065":"P; Best","Hardened Steels : 35-45 HRC":"H; Good","Cast Iron":"K; Good","Low Carbon Steel : 1010; 1018":"P; Best","List Name":"COBALT HSS DOUBLE END SQ","Medium Carbon Steel : 1035; 1045":"P; Best","Mill Type":"Double End","Full Description":"High Performance Cobalt HSS End Mills for General Milling Applications","Short Description":"High Performance Cobalt HSS End Mills for General Milling Applications","Stainless Steels : 17-4PH":"M; Good","View Speed and Feed Page":"Here","View Catalog Page":"Here","Aluminum : 6061; 7075":"N; Good","Stainless Steels : 400":"M; Good","Aluminum : Casting":"N; Good","Coolant Thru":"No","Cutting Type":"Non-Center Cutting","Weldon Flat":"Yes","End Cut Type":"Square End","Length of Cut - Specification":["REGULAR","STUB","LONG"],"Cutting Direction":"RH","Helix Direction":"RH","Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"1/8\" - 1\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"3.0625\" - 6.375\"","Shank-Sizes":"0.375\" - 1\"","Friendly Name":"542","CategoryBrand":"OSG"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20543/End_Mills_-_End_Mill_-_Double_End_Mills_-_List_543_-_Catalog"],"Overall Length - Inch (L)":["3.0625","3.25","3.375","3.5","4.125","5","5.625","6.125","6.375"],"Number of Flutes":"4","Diameter - Inch (D)":["0.125","0.1875","0.25","0.3125","0.375","0.5","0.625","0.75","0.875","1"],"Diameter - Fractional Size (D)":["1/8","3/16","1/4","5/16","3/8","1/2","5/8","3/4","7/8","1"],"Length of Cut - Inch (Lc)":["0.375","0.5","0.625","0.75","1","1.375","1.625","1.875"],"Helix Angle - Degree":"30","Shank Diameter - Inch (d)":["0.375","0.5","0.625","0.75","0.875","1"],"Product Overview":"4 Flute, HSS-Co, Regular Length","Web Literature 4":"800388CA","Stainless Steels : 300":"M; Good","Substrate":"HSS-CO","Web Literature 1":"8002024CA-EM,187|8002024CA-EMT,76","Notes":"Other coatings available upon request.","Surface Treatment":"BRIGHT","Alloy Steels : 4140; 4340":"P; Best","Units":"Inch","Die Steels":"P; Best","Hardened Steels : 35 HRC":"H; Good","High Carbon Steel : 1065":"P; Best","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":"Center Cutting","Cast Iron":"K; Good","Low Carbon Steel : 1010; 1018":"P; Best","List Name":"COBALT HSS DOUBLE END SQ","Medium Carbon Steel : 1035; 1045":"P; Best","Mill Type":"Double End","Full Description":"High Performance Cobalt HSS End Mills for General Milling Applications","Short Description":"High Performance Cobalt HSS End Mills for General Milling Applications","Stainless Steels : 17-4PH":"M; Good","View Speed and Feed Page":"Here","View Catalog Page":"Here","Aluminum : 6061; 7075":"N; Good","Stainless Steels : 400":"M; Good","Aluminum : Casting":"N; Good","Coolant Thru":"No","Weldon Flat":"Yes","End Cut Type":"Square End","Length of Cut - Specification":["REGULAR","STUB"],"Cutting Direction":"RH","Helix Direction":"RH","Cutting Diameter Tolerance - Inch":["+0 / -0.0011","-0.0004 / -0.0015"],"Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"1/8\" - 1\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"3.0625\" - 6.375\"","Shank-Sizes":"0.375\" - 1\"","Friendly Name":"543","CategoryBrand":"OSG"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20545/End_Mills_-_End_Mill_-_Single_End_Multiple_Flute_-_List_545_-_Catalog"],"Overall Length - Inch (L)":["3.0625","3.125","3.25","3.75","4","4.625","5.25","5.75","6.5","7.75"],"Number of Flutes":["4","6","8"],"Diameter - Inch (D)":["0.25","0.3125","0.375","0.4375","0.5","0.625","0.75","0.875","1","1.125","1.25","1.5","1.75","2"],"Cutting Diameter Tolerance - Inch":"+0.0011 / -0","Diameter - Fractional Size (D)":["1/4","5/16","3/8","7/16","1/2","5/8","3/4","7/8","1","1-1/8","1-1/4","1-1/2","1-3/4","2"],"Length of Cut - Inch (Lc)":["1.25","1.375","1.5","1.75","2","2.5","3","3.5","4"],"Helix Angle - Degree":"30","Shank Diameter - Inch (d)":["0.375","0.5","0.625","0.75","0.875","1","1.25","2"],"Web Literature 4":"800388CA","Stainless Steels : 300":"M; Good","Substrate":"HSS-CO","Product Overview":"HSS-Co, Long Length, Multiple Flute","Web Literature 1":"8002024CA-EM,171|8002024CA-EMT,76","Surface Treatment":"BRIGHT","Notes":"Other coatings available upon request. 2\" diameter shanks have combination drive.","Alloy Steels : 4140; 4340":"P; Best","Units":"Inch","Die Steels":"P; Best","Hardened Steels : 35 HRC":"H; Good","High Carbon Steel : 1065":"P; Best","Hardened Steels : 35-45 HRC":"H; Good","Cast Iron":"K; Good","Low Carbon Steel : 1010; 1018":"P; Best","Length of Cut - Specification":["LONG","REGULAR"],"List Name":"COBALT HSS EML","Medium Carbon Steel : 1035; 1045":"P; Best","Full Description":"High Performance Cobalt HSS End Mills for General Milling Applications","Short Description":"High Performance Cobalt HSS End Mills for General Milling Applications","Stainless Steels : 17-4PH":"M; Good","View Speed and Feed Page":"Here","View Catalog Page":"Here","Aluminum : 6061; 7075":"N; Good","Stainless Steels : 400":"M; Good","Aluminum : Casting":"N; Good","Coolant Thru":"No","Cutting Type":"Non-Center Cutting","Weldon Flat":"Yes","Mill Type":"Single End","End Cut Type":"Square End","Cutting Direction":"RH","Helix Direction":"RH","Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"1/4\" - 2\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"3.0625\" - 7.75\"","Shank-Sizes":"0.375\" - 2\"","Friendly Name":"545","CategoryBrand":"OSG"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20546/End_Mills_-_End_Mill_-_Single_End_Multiple_Flute_-_List_546_-_Catalog"],"Overall Length - Inch (L)":["3.0625","3.125","3.25","4","4.625","5.25","5.75","6.5","7.75","9.75"],"Number of Flutes":["4","6"],"Diameter - Inch (D)":["0.25","0.3125","0.375","0.5","0.625","0.75","0.875","1","1.25","2","1.5"],"Cutting Diameter Tolerance - Inch":"+0.0011 / -0","Diameter - Fractional Size (D)":["1/4","5/16","3/8","1/2","5/8","3/4","7/8","1","1-1/4","2","1-1/2"],"Length of Cut - Inch (Lc)":["1.25","1.375","1.5","2","2.5","3","3.5","4","6"],"Helix Angle - Degree":"30","Shank Diameter - Inch (d)":["0.375","0.5","0.625","0.75","0.875","1","1.25","2"],"Web Literature 4":"800388CA","Stainless Steels : 300":"M; Good","Substrate":"HSS-CO","Product Overview":"HSS-Co, Long Length, Multiple Flute","Web Literature 1":"8002024CA-EM,166|8002024CA-EMT,76","Notes":"Other coatings available upon request.","Surface Treatment":["BRIGHT","TiCN"],"Alloy Steels : 4140; 4340":"P; Best","Units":"Inch","Die Steels":"P; Best","Hardened Steels : 35 HRC":"H; Good","High Carbon Steel : 1065":"P; Best","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":"Center Cutting","Cast Iron":"K; Good","Low Carbon Steel : 1010; 1018":"P; Best","Length of Cut - Specification":["LONG","REGULAR"],"List Name":"COBALT HSS CC-EML","Medium Carbon Steel : 1035; 1045":"P; Best","Full Description":"High Performance Cobalt HSS End Mills for General Milling Applications","Short Description":"High Performance Cobalt HSS End Mills for General Milling Applications","Stainless Steels : 17-4PH":"M; Good","View Speed and Feed Page":"Here","View Catalog Page":"Here","Aluminum : 6061; 7075":"N; Good","Stainless Steels : 400":"M; Good","Aluminum : Casting":"N; Good","Coolant Thru":"No","Weldon Flat":"Yes","Mill Type":"Single End","End Cut Type":"Square End","Cutting Direction":"RH","Helix Direction":"RH","Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"1/4\" - 2\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"3.0625\" - 9.75\"","Shank-Sizes":"0.375\" - 2\"","Friendly Name":"546","CategoryBrand":"OSG"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20547/End_Mills_-_End_Mill_-_Single_End_Multiple_Flute_-_List_547_-_Catalog"],"Number of Flutes":["4","6","8"],"Overall Length - Inch (L)":["5.5"],"Shank Diameter - Inch (d)":["1","1.25"],"Cutting Diameter Tolerance - Inch":"+0.0011 / -0","Diameter - Fractional Size (D)":["1","1-1/4","1-1/2","1-3/4","2"],"Diameter - Inch (D)":["1","1.25","1.5","1.75","2"],"Helix Angle - Degree":"30","Length of Cut - Inch (Lc)":"3","Web Literature 4":"800388CA","Stainless Steels : 300":"M; Good","Substrate":"HSS-CO","Product Overview":"HSS-Co, Medium Length, Multiple Flute","Web Literature 1":"8002024CA-EM,170|8002024CA-EMT,76","Notes":"Other coatings available upon request.","Surface Treatment":"BRIGHT","Alloy Steels : 4140; 4340":"P; Best","Units":"Inch","Die Steels":"P; Best","Hardened Steels : 35 HRC":"H; Good","High Carbon Steel : 1065":"P; Best","Hardened Steels : 35-45 HRC":"H; Good","Cast Iron":"K; Good","Low Carbon Steel : 1010; 1018":"P; Best","List Name":"COBALT HSS CC-EMS","Medium Carbon Steel : 1035; 1045":"P; Best","Full Description":"High Performance Cobalt HSS End Mills for General Milling Applications","Short Description":"High Performance Cobalt HSS End Mills for General Milling Applications","Stainless Steels : 17-4PH":"M; Good","View Speed and Feed Page":"Here","View Catalog Page":"Here","Aluminum : 6061; 7075":"N; Good","Stainless Steels : 400":"M; Good","Aluminum : Casting":"N; Good","Coolant Thru":"No","Cutting Type":"Non-Center Cutting","Weldon Flat":"Yes","Mill Type":"Single End","End Cut Type":"Square End","Length of Cut - Specification":["REGULAR","STUB"],"Cutting Direction":"RH","Helix Direction":"RH","Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"1\" - 2\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"5.5\"","Shank-Sizes":"1\" - 1.25\"","Friendly Name":"547","CategoryBrand":"OSG"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20548/End_Mills_-_End_Mill_-_Single_End_Multiple_Flute_-_List_548_-_Catalog"],"Number of Flutes":"4","Overall Length - Inch (L)":["4.125","4.5","5.5"],"Shank Diameter - Inch (d)":["0.625","0.75","1","1.25"],"Cutting Diameter Tolerance - Inch":"+0.0011 / -0","Diameter - Inch (D)":["0.625","0.75","1","1.25","1.5"],"Helix Angle - Degree":"30","Length of Cut - Inch (Lc)":["2","2.25","3"],"Web Literature 4":"800388CA","Diameter - Fractional Size (D)":["5/8","3/4","1","1-1/4","1-1/2"],"Stainless Steels : 300":"M; Good","Substrate":"HSS-CO","Product Overview":"HSS-Co, Medium Length, Multiple Flute","Web Literature 1":"8002024CA-EM,165|8002024CA-EMT,76","Notes":"Other coatings available upon request.","Surface Treatment":["BRIGHT","TiCN"],"Alloy Steels : 4140; 4340":"P; Best","Units":"Inch","Die Steels":"P; Best","Hardened Steels : 35 HRC":"H; Good","High Carbon Steel : 1065":"P; Best","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":"Center Cutting","Cast Iron":"K; Good","Low Carbon Steel : 1010; 1018":"P; Best","Length of Cut - Specification":["LONG","REGULAR"],"List Name":"COBALT HSS CC-EMN","Medium Carbon Steel : 1035; 1045":"P; Best","Full Description":"High Performance Cobalt HSS End Mills for General Milling Applications","Short Description":"High Performance Cobalt HSS End Mills for General Milling Applications","Stainless Steels : 17-4PH":"M; Good","View Speed and Feed Page":"Here","View Catalog Page":"Here","Aluminum : 6061; 7075":"N; Good","Stainless Steels : 400":"M; Good","Aluminum : Casting":"N; Good","Coolant Thru":"No","Weldon Flat":"Yes","Mill Type":"Single End","End Cut Type":"Square End","Cutting Direction":"RH","Helix Direction":"RH","Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"5/8\" - 1.5\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"4.125\" - 5.5\"","Shank-Sizes":"0.625\" - 1.25\"","Friendly Name":"548","CategoryBrand":"OSG"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20557/End_Mills_-_End_Mill_-_Single_End_Multiple_Flute_-_List_557_-_Catalog"],"Overall Length - Inch (L)":["3.5625","3.75","4.25","5","6.125","6.25","7.25","8.5","10.5","11.75"],"Number of Flutes":["4","6"],"Diameter - Inch (D)":["0.25","0.3125","0.375","0.5","0.625","0.75","0.875","1","1.25","1.5","2"],"Cutting Diameter Tolerance - Inch":"+0.0011 / -0","Diameter - Fractional Size (D)":["1/4","5/16","3/8","1/2","5/8","3/4","7/8","1","1-1/4","1-1/2","2"],"Helix Angle - Degree":"30","Length of Cut - Inch (Lc)":["1.75","2","2.5","3","4","5","6","8"],"Shank Diameter - Inch (d)":["0.375","0.5","0.625","0.75","0.875","1","1.25","2"],"Web Literature 4":"800388CA","Stainless Steels : 300":"M; Good","Substrate":"HSS-CO","Product Overview":"HSS-Co, Extra-Long Length, Multiple Flute","Length of Cut - Specification":["EXTRA LONG","LONG"],"Web Literature 1":"8002024CA-EM,172|8002024CA-EMT,76","Notes":"Other coatings available upon request.","Surface Treatment":"BRIGHT","Alloy Steels : 4140; 4340":"P; Best","Units":"Inch","Die Steels":"P; Best","Hardened Steels : 35 HRC":"H; Good","High Carbon Steel : 1065":"P; Best","Hardened Steels : 35-45 HRC":"H; Good","Cast Iron":"K; Good","Low Carbon Steel : 1010; 1018":"P; Best","List Name":"COBALT HSS CE-EXML","Medium Carbon Steel : 1035; 1045":"P; Best","Full Description":"High Performance Cobalt HSS End Mills for General Milling Applications","Short Description":"High Performance Cobalt HSS End Mills for General Milling Applications","Stainless Steels : 17-4PH":"M; Good","View Speed and Feed Page":"Here","View Catalog Page":"Here","Aluminum : 6061; 7075":"N; Good","Stainless Steels : 400":"M; Good","Aluminum : Casting":"N; Good","Coolant Thru":"No","Cutting Type":"Non-Center Cutting","Weldon Flat":"Yes","Mill Type":"Single End","End Cut Type":"Square End","Cutting Direction":"RH","Helix Direction":"RH","Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"1/4\" - 2\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"3.5625\" - 11.75\"","Shank-Sizes":"0.375\" - 2\"","Friendly Name":"557","CategoryBrand":"OSG"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20558/End_Mills_-_End_Mill_-_Single_End_Multiple_Flute_-_List_558_-_Catalog"],"Overall Length - Inch (L)":["3.5625","3.75","4.25","5","6.125","6.25","7.25","8.5","10.5","11.75"],"Number of Flutes":["4","6"],"Diameter - Inch (D)":["0.25","0.3125","0.375","0.5","0.625","0.75","0.875","1","1.25","1.5","2"],"Cutting Diameter Tolerance - Inch":"+0.0011 / -0","Diameter - Fractional Size (D)":["1/4","5/16","3/8","1/2","5/8","3/4","7/8","1","1-1/4","1-1/2","2"],"Helix Angle - Degree":"30","Length of Cut - Inch (Lc)":["1.75","2","2.5","3","4","5","6","8"],"Shank Diameter - Inch (d)":["0.375","0.5","0.625","0.75","0.875","1","1.25","2"],"Web Literature 4":"800388CA","Stainless Steels : 300":"M; Good","Substrate":"HSS-CO","Product Overview":"HSS-Co, Extra-Long Length, Multiple Flute","Length of Cut - Specification":["EXTRA LONG","LONG"],"Web Literature 1":"8002024CA-EM,167|8002024CA-EMT,76","Notes":"Other coatings available upon request.","Surface Treatment":["BRIGHT","TiCN"],"Alloy Steels : 4140; 4340":"P; Best","Units":"Inch","Die Steels":"P; Best","Hardened Steels : 35 HRC":"H; Good","High Carbon Steel : 1065":"P; Best","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":"Center Cutting","Cast Iron":"K; Good","Low Carbon Steel : 1010; 1018":"P; Best","List Name":"COBALT HSS CC-EXML","Medium Carbon Steel : 1035; 1045":"P; Best","Full Description":"High Performance Cobalt HSS End Mills for General Milling Applications","Short Description":"High Performance Cobalt HSS End Mills for General Milling Applications","Stainless Steels : 17-4PH":"M; Good","View Speed and Feed Page":"Here","View Catalog Page":"Here","Aluminum : 6061; 7075":"N; Good","Stainless Steels : 400":"M; Good","Aluminum : Casting":"N; Good","Coolant Thru":"No","Weldon Flat":"Yes","Mill Type":"Single End","End Cut Type":"Square End","Cutting Direction":"RH","Helix Direction":"RH","Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"1/4\" - 2\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"3.5625\" - 11.75\"","Shank-Sizes":"0.375\" - 2\"","Friendly Name":"558","CategoryBrand":"OSG"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20562/End_Mills_-_End_Mill_-_Double_End_Mills_-_List_562_-_Catalog"],"Number of Flutes":"2","Diameter - Inch (D)":["0.03125","0.046875","0.0625","0.078125","0.09375","0.109375","0.125","0.140625","0.15625","0.171875","0.1875"],"Diameter - Fractional Size (D)":["1/32","3/64","1/16","5/64","3/32","7/64","1/8","9/64","5/32","11/64","3/16"],"Product Overview":"2 Flute, HSS-Co, Stub Length, Miniature","Shank Diameter - Inch (d)":["0.1875"],"Length of Cut - Inch (Lc)":["0.046875","0.0625","0.09375","0.125","0.140625","0.15625","0.1875","0.21875","0.234375","0.25","0.28125"],"Overall Length - Inch (L)":["2"],"Helix Angle - Degree":"30","Web Literature 4":"800388CA","Stainless Steels : 300":"M; Good","Substrate":"HSS-CO","Web Literature 1":"8002024CA-EM,188","Notes":"Other coatings available upon request.","Surface Treatment":"BRIGHT","Units":"Inch","Hardened Steels : 35 HRC":"H; Good","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":"Center Cutting","Cast Iron":"K; Good","Low Carbon Steel : 1010; 1018":"P; Best","List Name":"COBALT HSS DOUBLE END M-DDE","Medium Carbon Steel : 1035; 1045":"P; Best","Alloy Steels : 4140; 4340":"P; Good","Mill Type":"Double End","Full Description":"High Performance Cobalt HSS End Mills for General Milling Applications","Short Description":"High Performance Cobalt HSS End Mills for General Milling Applications","Die Steels":"P; Good","High Carbon Steel : 1065":"P; Good","Stainless Steels : 17-4PH":"M; Good","View Catalog Page":"Here","Aluminum : 6061; 7075":"N; Good","Stainless Steels : 400":"M; Good","Aluminum : Casting":"N; Good","Weldon Flat":"No","Coolant Thru":"No","End Cut Type":"Square End","Cutting Direction":"RH","Length of Cut - Specification":"STUB","Helix Direction":"RH","Cutting Diameter Tolerance - Inch":["+0 / -0.0011","-0.0004 / -0.0015"],"Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"1/32\" - 0.1875\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"2\"","Shank-Sizes":"0.1875\"","Friendly Name":"562","CategoryBrand":"OSG"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20563/End_Mills_-_End_Mill_-_Double_End_Mills_-_List_563_-_Catalog"],"Number of Flutes":"2","Diameter - Inch (D)":["0.03125","0.046875","0.0625","0.078125","0.09375","0.109375","0.125","0.140625","0.15625","0.171875","0.1875"],"Diameter - Fractional Size (D)":["1/32","3/64","1/16","5/64","3/32","7/64","1/8","9/64","5/32","11/64","3/16"],"Product Overview":"2 Flute, HSS-Co, Regular Length, Miniature","Shank Diameter - Inch (d)":["0.1875"],"Length of Cut - Inch (Lc)":["0.09375","0.140625","0.1875","0.234375","0.28125","0.328125","0.375","0.40625","0.4375","0.5"],"Overall Length - Inch (L)":["2.25"],"Helix Angle - Degree":"30","Web Literature 4":"800388CA","Stainless Steels : 300":"M; Good","Substrate":"HSS-CO","Web Literature 1":"8002024CA-EM,189","Notes":"Other coatings available upon request.","Surface Treatment":"BRIGHT","Units":"Inch","Hardened Steels : 35 HRC":"H; Good","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":"Center Cutting","Cast Iron":"K; Good","Low Carbon Steel : 1010; 1018":"P; Best","List Name":"COBALT HSS DOUBLE END M-DDE","Medium Carbon Steel : 1035; 1045":"P; Best","Alloy Steels : 4140; 4340":"P; Good","Mill Type":"Double End","Full Description":"High Performance Cobalt HSS End Mills for General Milling Applications","Short Description":"High Performance Cobalt HSS End Mills for General Milling Applications","Die Steels":"P; Good","High Carbon Steel : 1065":"P; Good","Stainless Steels : 17-4PH":"M; Good","View Catalog Page":"Here","Aluminum : 6061; 7075":"N; Good","Stainless Steels : 400":"M; Good","Aluminum : Casting":"N; Good","Weldon Flat":"No","Coolant Thru":"No","End Cut Type":"Square End","Length of Cut - Specification":"REGULAR","Cutting Direction":"RH","Helix Direction":"RH","Cutting Diameter Tolerance - Inch":["+0 / -0.0011","-0.0004 / -0.0015"],"Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"1/32\" - 0.1875\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"2.25\"","Shank-Sizes":"0.1875\"","Friendly Name":"563","CategoryBrand":"OSG"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20564/End_Mills_-_End_Mill_-_Double_End_Mills_-_List_564_-_Catalog"],"Number of Flutes":"2","Diameter - Inch (D)":["0.0625","0.09375","0.125","0.15625","0.1875"],"Cutting Diameter Tolerance - Inch":["+0.0011 / -0","-0.0004 / -0.0015"],"Diameter - Fractional Size (D)":["1/16","3/32","1/8","5/32","3/16"],"Product Overview":"2 Flute, HSS-Co, Long Length, Miniature","Shank Diameter - Inch (d)":["0.1875"],"Length of Cut - Inch (Lc)":["0.21875","0.28125","0.75","0.875","1"],"Helix Angle - Degree":"30","Overall Length - Inch (L)":["2.5","2.625","3.125","3.25","3.375"],"Web Literature 4":"800388CA","Stainless Steels : 300":"M; Good","Substrate":"HSS-CO","Web Literature 1":"8002024CA-EM,190","Notes":"Other coatings available upon request.","Surface Treatment":"BRIGHT","Units":"Inch","Hardened Steels : 35 HRC":"H; Good","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":"Center Cutting","Cast Iron":"K; Good","Low Carbon Steel : 1010; 1018":"P; Best","Length of Cut - Specification":["LONG","REGULAR","EXTRA LONG"],"List Name":"COBALT HSS DOUBLE END M-DDEL","Medium Carbon Steel : 1035; 1045":"P; Best","Alloy Steels : 4140; 4340":"P; Good","Mill Type":"Double End","Full Description":"High Performance Cobalt HSS End Mills for General Milling Applications","Die Steels":"P; Good","Short Description":"High Performance Cobalt HSS End Mills for General Milling Applications","High Carbon Steel : 1065":"P; Good","Stainless Steels : 17-4PH":"M; Good","View Catalog Page":"Here","Aluminum : 6061; 7075":"N; Good","Stainless Steels : 400":"M; Good","Aluminum : Casting":"N; Good","Weldon Flat":"No","Coolant Thru":"No","End Cut Type":"Square End","Cutting Direction":"RH","Helix Direction":"RH","Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"1/16\" - 0.1875\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"2.5\" - 3.375\"","Shank-Sizes":"0.1875\"","Friendly Name":"564","CategoryBrand":"OSG"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20566/End_Mills_-_End_Mill_-_Double_End_Mills_-_List_566_-_Catalog"],"Number of Flutes":"4","Diameter - Inch (D)":["0.0625","0.09375","0.125","0.15625","0.1875"],"Cutting Diameter Tolerance - Inch":["+0.0011 / -0","-0.0004 / -0.0015"],"Diameter - Fractional Size (D)":["1/16","3/32","1/8","5/32","3/16"],"Shank Diameter - Inch (d)":["0.1875"],"Length of Cut - Inch (Lc)":["0.09375","0.140625","0.1875","0.234375","0.28125"],"Overall Length - Inch (L)":["2"],"Helix Angle - Degree":"30","Product Overview":"4 Flute, HSS-Co, Stub Length, Miniature","Web Literature 4":"800388CA","Stainless Steels : 300":"M; Good","Substrate":"HSS-CO","Web Literature 1":"8002024CA-EM,191","Notes":"Other coatings available upon request.","Surface Treatment":"BRIGHT","Units":"Inch","Hardened Steels : 35 HRC":"H; Good","High Carbon Steel : 1065":"P; Best","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":"Center Cutting","Cast Iron":"K; Good","Low Carbon Steel : 1010; 1018":"P; Best","List Name":"COBALT HSS DOUBLE END M-FDE","Medium Carbon Steel : 1035; 1045":"P; Best","Alloy Steels : 4140; 4340":"P; Good","Mill Type":"Double End","Full Description":"High Performance Cobalt HSS End Mills for General Milling Applications","Short Description":"High Performance Cobalt HSS End Mills for General Milling Applications","Die Steels":"P; Good","Stainless Steels : 17-4PH":"M; Good","View Catalog Page":"Here","Aluminum : 6061; 7075":"N; Good","Stainless Steels : 400":"M; Good","Aluminum : Casting":"N; Good","Weldon Flat":"No","Coolant Thru":"No","End Cut Type":"Square End","Cutting Direction":"RH","Length of Cut - Specification":"STUB","Helix Direction":"RH","Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"1/16\" - 0.1875\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"2\"","Shank-Sizes":"0.1875\"","Friendly Name":"566","CategoryBrand":"OSG"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20567/End_Mills_-_End_Mill_-_Double_End_Mills_-_List_567_-_Catalog"],"Number of Flutes":"4","Diameter - Inch (D)":["0.0625","0.09375","0.125","0.15625","0.1875"],"Cutting Diameter Tolerance - Inch":["+0.0011 / -0","-0.0004 / -0.0015"],"Diameter - Fractional Size (D)":["1/16","3/32","1/8","5/32","3/16"],"Shank Diameter - Inch (d)":["0.1875"],"Length of Cut - Inch (Lc)":["0.177","0.267","0.362","0.417","0.48"],"Overall Length - Inch (L)":["2.25"],"Helix Angle - Degree":"30","Product Overview":"4 Flute, HSS-Co, Regular Length, Miniature","Web Literature 4":"800388CA","Stainless Steels : 300":"M; Good","Substrate":"HSS-CO","Web Literature 1":"8002024CA-EM,192","Notes":"Other coatings available upon request.","Surface Treatment":"BRIGHT","Units":"Inch","Hardened Steels : 35 HRC":"H; Good","High Carbon Steel : 1065":"P; Best","Hardened Steels : 35-45 HRC":"H; Good","Cast Iron":"K; Good","Low Carbon Steel : 1010; 1018":"P; Best","List Name":"COBALT HSS DOUBLE END M-FDE","Medium Carbon Steel : 1035; 1045":"P; Best","Alloy Steels : 4140; 4340":"P; Good","Mill Type":"Double End","Full Description":"High Performance Cobalt HSS End Mills for General Milling Applications","Short Description":"High Performance Cobalt HSS End Mills for General Milling Applications","Die Steels":"P; Good","Stainless Steels : 17-4PH":"M; Good","View Catalog Page":"Here","Aluminum : 6061; 7075":"N; Good","Stainless Steels : 400":"M; Good","Aluminum : Casting":"N; Good","Weldon Flat":"No","Coolant Thru":"No","Cutting Type":"Non-Center Cutting","End Cut Type":"Square End","Length of Cut - Specification":"REGULAR","Cutting Direction":"RH","Helix Direction":"RH","Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"1/16\" - 0.1875\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"2.25\"","Shank-Sizes":"0.1875\"","Friendly Name":"567","CategoryBrand":"OSG"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20568/End_Mills_-_End_Mill_-_Double_End_Mills_-_List_568_-_Catalog"],"Number of Flutes":"4","Diameter - Inch (D)":["0.0625","0.09375","0.125","0.15625","0.1875"],"Cutting Diameter Tolerance - Inch":["+0.0011 / -0","-0.0004 / -0.0015"],"Diameter - Fractional Size (D)":["1/16","3/32","1/8","5/32","3/16"],"Shank Diameter - Inch (d)":["0.1875"],"Length of Cut - Inch (Lc)":["0.22","0.279","0.732","0.854","0.98"],"Helix Angle - Degree":"30","Overall Length - Inch (L)":["2.5","2.625","3.125","3.25","3.375"],"Product Overview":"4 Flute, HSS-Co, Long Length, Miniature","Web Literature 4":"800388CA","Stainless Steels : 300":"M; Good","Substrate":"HSS-CO","Web Literature 1":"8002024CA-EM,193","Notes":"Other coatings available upon request.","Surface Treatment":"BRIGHT","Units":"Inch","Hardened Steels : 35 HRC":"H; Good","High Carbon Steel : 1065":"P; Best","Hardened Steels : 35-45 HRC":"H; Good","Cast Iron":"K; Good","Low Carbon Steel : 1010; 1018":"P; Best","Length of Cut - Specification":["LONG","REGULAR","EXTRA LONG"],"List Name":"COBALT HSS DOUBLE END M-FDEL","Medium Carbon Steel : 1035; 1045":"P; Best","Alloy Steels : 4140; 4340":"P; Good","Mill Type":"Double End","Full Description":"High Performance Cobalt HSS End Mills for General Milling Applications","Short Description":"High Performance Cobalt HSS End Mills for General Milling Applications","Die Steels":"P; Good","Stainless Steels : 17-4PH":"M; Good","View Catalog Page":"Here","Aluminum : 6061; 7075":"N; Good","Stainless Steels : 400":"M; Good","Aluminum : Casting":"N; Good","Weldon Flat":"No","Coolant Thru":"No","Cutting Type":"Non-Center Cutting","End Cut Type":"Square End","Cutting Direction":"RH","Helix Direction":"RH","Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"1/16\" - 0.1875\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"2.5\" - 3.375\"","Shank-Sizes":"0.1875\"","Friendly Name":"568","CategoryBrand":"OSG"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20573/End_Mills_-_End_Mill_-_HY-PRO_V_-_List_573_-_Catalog"],"Number of Flutes":"2","Diameter - Inch (D)":["0.125","0.15625","0.1875","0.21875","0.25","0.28125","0.3125","0.34375","0.375","0.40625","0.4375","0.46875","0.5","0.53125","0.5625","0.59375","0.65625","0.6875","0.71875","0.625","0.78125","0.8125","0.84375","0.9375","0.75","0.90625","0.96875","0.875","1"],"Cutting Diameter Tolerance - Inch":"+0.0011 / -0","Diameter - Fractional Size (D)":["1/8","5/32","3/16","7/32","1/4","9/32","5/16","11/32","3/8","13/32","7/16","15/32","1/2","17/32","9/16","19/32","21/32","11/16","23/32","5/8","25/32","13/16","27/32","15/16","3/4","29/32","31/32","7/8","1"],"Product Overview":"2 Flute, HSS-Va, Regular Length","Length of Cut - Inch (Lc)":["0.375","0.4375","0.5","0.5625","0.8125","1","1.125","1.3125","1.5","1.625"],"Overall Length - Inch (L)":["2.3125","2.5","3","3.125","3.3125","3.4375","3.625","3.5625","3.75","4.125"],"Helix Angle - Degree":"30","Shank Diameter - Inch (d)":["0.375","0.5","0.625","0.75","0.875","1"],"Web Literature 4":"800388CA","Stainless Steels : 300":"M; Good","Substrate":"HSSE","Web Literature 1":"8002024CA-EM,151|8002024CA-EMT,80","Notes":"Other coatings available upon request.","Surface Treatment":["BRIGHT","TiCN"],"Alloy Steels : 4140; 4340":"P; Best","Units":"Inch","Die Steels":"P; Best","Hardened Steels : 35 HRC":"H; Good","Cast Iron":"K; Best","High Carbon Steel : 1065":"P; Best","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":"Center Cutting","Low Carbon Steel : 1010; 1018":"P; Best","Medium Carbon Steel : 1035; 1045":"P; Best","View Speed and Feed Page":"Here","View Catalog Page":"Here","Stainless Steels : 400":"M; Good","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Coolant Thru":"No","Full Description":"Performance HSSE End Mills for Ferrous and Non-Ferrous Materials","Short Description":"Performance HSSE End Mills for Ferrous and Non-Ferrous Materials","Weldon Flat":"Yes","Mill Type":"Single End","End Cut Type":"Square End","Length of Cut - Specification":["REGULAR","STUB"],"Cutting Direction":"RH","Helix Direction":"RH","List Name":"V EDS","Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"1/8\" - 1\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"2.3125\" - 4.125\"","Shank-Sizes":"0.375\" - 1\"","Friendly Name":"573","CategoryBrand":"HY-PRO"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20574/End_Mills_-_End_Mill_-_HY-PRO_V_-_List_574_-_Catalog"],"Number of Flutes":["4","6"],"Diameter - Inch (D)":["0.125","0.15625","0.1875","0.21875","0.25","0.28125","0.3125","0.34375","0.375","0.40625","0.4375","0.46875","0.5","0.53125","0.5625","0.59375","0.65625","0.6875","0.71875","0.625","0.78125","0.8125","0.84375","0.9375","0.75","0.90625","0.96875","0.875","1"],"Cutting Diameter Tolerance - Inch":"+0.0011 / -0","Diameter - Fractional Size (D)":["1/8","5/32","3/16","7/32","1/4","9/32","5/16","11/32","3/8","13/32","7/16","15/32","1/2","17/32","9/16","19/32","21/32","11/16","23/32","5/8","25/32","13/16","27/32","15/16","3/4","29/32","31/32","7/8","1"],"Length of Cut - Inch (Lc)":["0.375","0.4375","0.5","0.5625","0.625","0.6875","0.75","1","1.25","1.375","1.625","1.875","2"],"Overall Length - Inch (L)":["2.3125","2.375","2.4375","2.5","2.6875","3.25","3.375","3.625","3.75","4","3.875","4.125","4.5"],"Helix Angle - Degree":"30","Shank Diameter - Inch (d)":["0.375","0.5","0.625","0.75","0.875","1"],"Web Literature 4":"800388CA","Stainless Steels : 300":"M; Good","Substrate":"HSSE","Web Literature 1":["8002024CA-EM,152|8002024CA-EMT,80","8002024CA-EM,153|8002024CA-EMT,80"],"Notes":"Other coatings available upon request.","Surface Treatment":["BRIGHT","TiCN"],"Alloy Steels : 4140; 4340":"P; Best","Units":"Inch","Die Steels":"P; Best","Hardened Steels : 35 HRC":"H; Good","Cast Iron":"K; Best","High Carbon Steel : 1065":"P; Best","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":"Center Cutting","Low Carbon Steel : 1010; 1018":"P; Best","Medium Carbon Steel : 1035; 1045":"P; Best","View Speed and Feed Page":"Here","View Catalog Page":"Here","Stainless Steels : 400":"M; Good","Product Overview":"Multiple Flute, HSS-Va, Regular Length","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Coolant Thru":"No","Full Description":"Performance HSSE End Mills for Ferrous and Non-Ferrous Materials","Short Description":"Performance HSSE End Mills for Ferrous and Non-Ferrous Materials","Weldon Flat":"Yes","Mill Type":"Single End","End Cut Type":"Square End","Length of Cut - Specification":["REGULAR","STUB"],"Cutting Direction":"RH","Helix Direction":"RH","List Name":"V CC-EMS","Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"1/8\" - 1\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"2.3125\" - 4.5\"","Shank-Sizes":"0.375\" - 1\"","Friendly Name":"574","CategoryBrand":"HY-PRO"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20580/End_Mills_-_End_Mill_-_Single_End_Mills_-_List_580_-_Catalog"],"Diameter - Metric (D)":["3","4","5","6","7","8","9","10","11","12","13","14","15","16","17","18","19","20","21","22","23","24","25","28","32","36","40","45","50","3.5","4.5","5.5","6.5","7.5","8.5","9.5","10.5","11.5","12.5","13.5","14.5"],"Length of Cut - Metric (Lc)":["9.52","11.11","12.7","14.28","20.63","25.4","28.57","33.33","38.1","41.27"],"Number of Flutes":"2","Overall Length - Metric (L)":["58.7","63.5","76.2","79.3","87.3","90.4","95.2","104.7"],"Cutting Diameter Tolerance - Metric":"+0.028 / -0","Shank Diameter - Metric (d)":["9.52","12.7","15.87","19.05","22.22","25.4","31.75"],"Product Overview":"2 Flute, HSS-Co, Regular Length","Helix Angle - Degree":"30","Web Literature 4":"800388CA","Stainless Steels : 300":"M; Good","Substrate":"HSS-CO","Web Literature 1":"8002024CA-EM,155|8002024CA-EMT,82","Notes":"Other coatings available upon request.","Surface Treatment":"BRIGHT","Hardened Steels : 35 HRC":"H; Good","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":"Center Cutting","Cast Iron":"K; Good","Low Carbon Steel : 1010; 1018":"P; Best","Length of Cut - Specification":["LONG","REGULAR","STUB"],"List Name":"COBALT HSS EDS","Medium Carbon Steel : 1035; 1045":"P; Best","Alloy Steels : 4140; 4340":"P; Good","Full Description":"High Performance Cobalt HSS End Mills for General Milling Applications","Die Steels":"P; Good","Short Description":"High Performance Cobalt HSS End Mills for General Milling Applications","High Carbon Steel : 1065":"P; Good","Stainless Steels : 17-4PH":"M; Good","View Speed and Feed Page":"Here","View Catalog Page":"Here","Aluminum : 6061; 7075":"N; Good","Stainless Steels : 400":"M; Good","Units":"Metric","Aluminum : Casting":"N; Good","Coolant Thru":"No","Weldon Flat":"Yes","Mill Type":"Single End","End Cut Type":"Square End","Cutting Direction":"RH","Helix Direction":"RH","Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"3mm - 50mm","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"58.7mm - 104.7mm","Shank-Sizes":"9.52mm - 31.75mm","Friendly Name":"580","CategoryBrand":"OSG"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20581/End_Mills_-_End_Mill_-_Single_End_Multiple_Flute_-_List_581_-_Catalog"],"Diameter - Metric (D)":["3","4","5","6","7","8","9","10","11","12","13","14","15","16","17","18","19","20","21","22","23","24","25","28","32","36","40","45","3.5","4.5","5.5","6.5","7.5","8.5","9.5","10.5","11.5","12.5","13.5","14.5"],"Length of Cut - Metric (Lc)":["9.52","11.11","14.28","15.87","17.46","19.05","25.4","31.75","34.92","41.27","47.62","50.8","12.7"],"Number of Flutes":["4","6"],"Overall Length - Metric (L)":["58.7","60.3","61.9","63.5","68.2","82.5","85.7","95.2","98.4","104.7","114.3"],"Cutting Diameter Tolerance - Metric":"+0.028 / -0","Shank Diameter - Metric (d)":["9.52","12.7","15.87","19.05","22.22","25.4","31.75"],"Product Overview":"3 Flute, HSS-Co, Regular Length, Center Cutting & Center Hole","Helix Angle - Degree":"30","Web Literature 4":"800388CA","Stainless Steels : 300":"M; Good","Substrate":"HSS-CO","Web Literature 1":"8002024CA-EM,161|8002024CA-EMT,84","Notes":"Other coatings available upon request.","Surface Treatment":"BRIGHT","Alloy Steels : 4140; 4340":"P; Best","Die Steels":"P; Best","Hardened Steels : 35 HRC":"H; Good","High Carbon Steel : 1065":"P; Best","Hardened Steels : 35-45 HRC":"H; Good","Cast Iron":"K; Good","Low Carbon Steel : 1010; 1018":"P; Best","Length of Cut - Specification":["LONG","REGULAR","STUB"],"List Name":"COBALT HSS CE-EMS","Medium Carbon Steel : 1035; 1045":"P; Best","Full Description":"High Performance Cobalt HSS End Mills for General Milling Applications","Short Description":"High Performance Cobalt HSS End Mills for General Milling Applications","Stainless Steels : 17-4PH":"M; Good","View Speed and Feed Page":"Here","View Catalog Page":"Here","Aluminum : 6061; 7075":"N; Good","Stainless Steels : 400":"M; Good","Units":"Metric","Aluminum : Casting":"N; Good","Coolant Thru":"No","Cutting Type":"Non-Center Cutting","Weldon Flat":"Yes","Mill Type":"Single End","End Cut Type":"Square End","Cutting Direction":"RH","Helix Direction":"RH","Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"3mm - 45mm","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"58.7mm - 114.3mm","Shank-Sizes":"9.52mm - 31.75mm","Friendly Name":"581","CategoryBrand":"OSG"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20582/End_Mills_-_End_Mill_-_Double_End_Mills_-_List_582_-_Catalog"],"Diameter - Metric (D)":["3","4","5","6","7","8","9","10","11","12","13","14","15","16","17","18","19","20","21","22","23","24","25","1","1.5","2","2.5","3.5","4.5","5.5","6.5","7.5","8.5","9.5","10.5","11.5","12.5","13.5","14.5"],"Length of Cut - Metric (Lc)":["9.52","11.11","12.7","14.28","20.63","28.57","33.33","39.68","41.27","2.38","4.76","5.95","7.14"],"Number of Flutes":"2","Cutting Diameter Tolerance - Metric":"+0 / -0.028","Overall Length - Metric (L)":["77.7","79.3","95.2","114.3","127","139.7","149.2","57.1"],"Shank Diameter - Metric (d)":["9.52","12.7","15.87","19.05","22.22","25.4","4.76"],"Helix Angle - Degree":"30","Stainless Steels : 17-4PH":"M; Good","Web Literature 4":"800388CA","Stainless Steels : 300":"M; Good","Substrate":"HSS-CO","Product Overview":"HSS-Co, Multiple Flute, Inch Shank","Web Literature 1":"8002024CA-EM,184|8002024CA-EMT,82","Notes":"Other coatings available upon request. 4.76mm diameter shanks have straight shanks.","Surface Treatment":"BRIGHT","Hardened Steels : 35 HRC":"H; Good","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":"Center Cutting","Cast Iron":"K; Good","Low Carbon Steel : 1010; 1018":"P; Best","Length of Cut - Specification":["LONG","REGULAR","STUB"],"List Name":"COBALT HSS DOUBLE END DDE","Medium Carbon Steel : 1035; 1045":"P; Best","Alloy Steels : 4140; 4340":"P; Good","Mill Type":"Double End","Full Description":"High Performance Cobalt HSS End Mills for General Milling Applications","Die Steels":"P; Good","Short Description":"High Performance Cobalt HSS End Mills for General Milling Applications","High Carbon Steel : 1065":"P; Good","View Speed and Feed Page":"Here","View Catalog Page":"Here","Aluminum : 6061; 7075":"N; Good","Stainless Steels : 400":"M; Good","Units":"Metric","Aluminum : Casting":"N; Good","Coolant Thru":"No","Weldon Flat":"Yes","End Cut Type":"Square End","Cutting Direction":"RH","Helix Direction":"RH","Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"1mm - 25mm","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"57.1mm - 149.2mm","Shank-Sizes":"4.76mm - 25.4mm","Friendly Name":"582","CategoryBrand":"OSG"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FTapered%2FList%20591/End_Mills_-_End_Mill_-_Single_End_Tapered_-_List_591"],"Number of Flutes":"3","Diameter - Inch (D)":["0.0625","0.078125","0.09375","0.125","0.1875","0.25","0.375","0.5","0.625"],"Taper Angle Tolerance - Degree":"+0 / -10'","Taper per Side - Degree (α)":"1","Diameter - Fractional Size (D)":["1/16","5/64","3/32","1/8","3/16","1/4","3/8","1/2","5/8"],"Helix Angle - Degree":"25","Product Overview":"3 Flute, HSS-Co, 1 degree taper","Shank Diameter - Inch (d)":["0.1875","0.375","0.5","0.625","0.75"],"Overall Length - Inch (L)":["1.75","2.25","2","2.6875","1.625","2.625","3.125","2.5","3","4","5","3.25","4.25","5.25","5.375","6.5"],"Length of Cut - Inch (Lc)":["0.5","1","0.75","1.5","0.375","1.25","2.25","3.25","4.25"],"Stainless Steels : 17-4PH":"M; Good","Web Literature 4":"800388CA","Stainless Steels : 300":"M; Good","Substrate":"HSS-CO","Length of Cut - Specification":["EXTRA LONG","REGULAR","LONG"],"Web Literature 1":"8002024CA-EM,337|8002024CA-EMT,177","Notes":"Other coatings available upon request.","Surface Treatment":"BRIGHT","Alloy Steels : 4140; 4340":"P; Best","Units":"Inch","Die Steels":"P; Best","Hardened Steels : 35 HRC":"H; Good","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":"Center Cutting","Cast Iron":"K; Good","List Name":"COBALT HSS TPET","Full Description":"High Performance Cobalt HSS End Mills for General Milling Applications","Short Description":"High Performance Cobalt HSS End Mills for General Milling Applications","High Carbon Steel : 1065":"P; Good","Low Carbon Steel : 1010; 1018":"P; Good","View Speed and Feed Page":"Here","View Catalog Page":"Here","Aluminum : 6061; 7075":"N; Good","Stainless Steels : 400":"M; Good","Aluminum : Casting":"N; Good","Coolant Thru":"No","Medium Carbon Steel : 1035; 1045":"P; Good","Weldon Flat":"Yes","Mill Type":"Single End","End Cut Type":"Square End","Cutting Direction":"RH","Type (feature)":"Tapered","Helix Direction":"RH","Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"1/16\" - 0.625\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"1.625\" - 6.5\"","Shank-Sizes":"0.1875\" - 0.75\"","Friendly Name":"591","CategoryBrand":"OSG"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FTapered%2FList%20593/End_Mills_-_End_Mill_-_Single_End_Tapered_-_List_593"],"Number of Flutes":"3","Diameter - Inch (D)":["0.0625","0.078125","0.09375","0.125","0.1875","0.25","0.375","0.5","0.625"],"Taper Angle Tolerance - Degree":"+0 / -10'","Diameter - Fractional Size (D)":["1/16","5/64","3/32","1/8","3/16","1/4","3/8","1/2","5/8"],"Taper per Side - Degree (α)":"2","Helix Angle - Degree":"25","Shank Diameter - Inch (d)":["0.1875","0.375","0.5","0.625","0.75"],"Product Overview":"3 Flute, HSS-Co, 2 degree taper","Overall Length - Inch (L)":["1.75","2.25","2.6875","2","2.5","2.875","2.625","3.125","3","4.375","5.25","3.25","4.25","5.375","6.5"],"Length of Cut - Inch (Lc)":["0.5","1","1.5","0.75","1.25","2.25","3.25","4.25"],"Stainless Steels : 17-4PH":"M; Good","Web Literature 4":"800388CA","Stainless Steels : 300":"M; Good","Substrate":"HSS-CO","Length of Cut - Specification":["EXTRA LONG","LONG","REGULAR"],"Web Literature 1":"8002024CA-EM,338|8002024CA-EMT,178","Notes":"Other coatings available upon request.","Surface Treatment":"BRIGHT","Alloy Steels : 4140; 4340":"P; Best","Units":"Inch","Die Steels":"P; Best","Hardened Steels : 35 HRC":"H; Good","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":"Center Cutting","Cast Iron":"K; Good","List Name":"COBALT HSS TPET","Full Description":"High Performance Cobalt HSS End Mills for General Milling Applications","Short Description":"High Performance Cobalt HSS End Mills for General Milling Applications","High Carbon Steel : 1065":"P; Good","Low Carbon Steel : 1010; 1018":"P; Good","View Speed and Feed Page":"Here","View Catalog Page":"Here","Aluminum : 6061; 7075":"N; Good","Stainless Steels : 400":"M; Good","Aluminum : Casting":"N; Good","Coolant Thru":"No","Medium Carbon Steel : 1035; 1045":"P; Good","Weldon Flat":"Yes","Mill Type":"Single End","End Cut Type":"Square End","Cutting Direction":"RH","Type (feature)":"Tapered","Helix Direction":"RH","Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"1/16\" - 0.625\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"1.75\" - 6.5\"","Shank-Sizes":"0.1875\" - 0.75\"","Friendly Name":"593","CategoryBrand":"OSG"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FTapered%2FList%20594/End_Mills_-_End_Mill_-_Single_End_Tapered_-_List_594"],"Number of Flutes":"3","Overall Length - Inch (L)":["2.875","3.125","3.375","3.75","4.25","2.625","3","4.5","5","5.375","6.125","2.5","2.75","3.25","5.25","6.25","4.375"],"Diameter - Inch (D)":["0.09375","0.109375","0.125","0.1875","0.25","0.375","0.5"],"Taper Angle Tolerance - Degree":"+0 / -10'","Helix Angle - Degree":"25","Taper per Side - Degree (α)":"3","Product Overview":"3 Flute, HSS-Co, 3 degree taper","Diameter - Fractional Size (D)":["3/32","7/64","1/8","3/16","1/4","3/8","1/2"],"Length of Cut - Inch (Lc)":["1","1.25","1.5","2","2.5","0.75","1.125","3","3.25","4","2.25"],"Shank Diameter - Inch (d)":["0.375","0.5","0.625","0.75"],"Stainless Steels : 17-4PH":"M; Good","Web Literature 4":"800388CA","Stainless Steels : 300":"M; Good","Substrate":"HSS-CO","Length of Cut - Specification":["EXTRA LONG","LONG","REGULAR"],"Web Literature 1":"8002024CA-EM,339|8002024CA-EMT,178","Notes":"Other coatings available upon request.","Surface Treatment":"BRIGHT","Alloy Steels : 4140; 4340":"P; Best","Units":"Inch","Die Steels":"P; Best","Hardened Steels : 35 HRC":"H; Good","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":"Center Cutting","Cast Iron":"K; Good","List Name":"COBALT HSS TPET","Full Description":"High Performance Cobalt HSS End Mills for General Milling Applications","Short Description":"High Performance Cobalt HSS End Mills for General Milling Applications","High Carbon Steel : 1065":"P; Good","Low Carbon Steel : 1010; 1018":"P; Good","View Speed and Feed Page":"Here","View Catalog Page":"Here","Aluminum : 6061; 7075":"N; Good","Stainless Steels : 400":"M; Good","Aluminum : Casting":"N; Good","Coolant Thru":"No","Medium Carbon Steel : 1035; 1045":"P; Good","Weldon Flat":"Yes","Mill Type":"Single End","End Cut Type":"Square End","Cutting Direction":"RH","Type (feature)":"Tapered","Helix Direction":"RH","Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"3/32\" - 0.5\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"2.5\" - 6.25\"","Shank-Sizes":"0.375\" - 0.75\"","Friendly Name":"594","CategoryBrand":"OSG"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FTapered%2FList%20595/End_Mills_-_End_Mill_-_Single_End_Tapered_-_List_595"],"Number of Flutes":"3","Diameter - Inch (D)":["0.09375","0.109375","0.125","0.1875","0.25","0.375","0.5"],"Taper Angle Tolerance - Degree":"+0 / -10'","Helix Angle - Degree":"25","Product Overview":"3 Flute, HSS-Co, 5 degree taper","Diameter - Fractional Size (D)":["3/32","7/64","1/8","3/16","1/4","3/8","1/2"],"Length of Cut - Inch (Lc)":["0.75","1","1.25","1.5","2","2.5","1.125","3","3.25","4","2.25"],"Overall Length - Inch (L)":["2.625","2.875","3","3.3125","4","4.625","3.25","3.75","4.5","5.25","2.5625","3.375","5.5","6.25","2.5","4.375"],"Shank Diameter - Inch (d)":["0.375","0.5","0.625","0.75"],"Stainless Steels : 17-4PH":"M; Good","Web Literature 4":"800388CA","Taper per Side - Degree (α)":"5","Stainless Steels : 300":"M; Good","Substrate":"HSS-CO","Length of Cut - Specification":["EXTRA LONG","LONG","REGULAR"],"Web Literature 1":"8002024CA-EM,340|8002024CA-EMT,179","Notes":"Other coatings available upon request.","Surface Treatment":"BRIGHT","Alloy Steels : 4140; 4340":"P; Best","Units":"Inch","Die Steels":"P; Best","Hardened Steels : 35 HRC":"H; Good","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":"Center Cutting","Cast Iron":"K; Good","List Name":"COBALT HSS TPET","Full Description":"High Performance Cobalt HSS End Mills for General Milling Applications","Short Description":"High Performance Cobalt HSS End Mills for General Milling Applications","High Carbon Steel : 1065":"P; Good","Low Carbon Steel : 1010; 1018":"P; Good","View Speed and Feed Page":"Here","View Catalog Page":"Here","Aluminum : 6061; 7075":"N; Good","Stainless Steels : 400":"M; Good","Aluminum : Casting":"N; Good","Coolant Thru":"No","Medium Carbon Steel : 1035; 1045":"P; Good","Weldon Flat":"Yes","Mill Type":"Single End","End Cut Type":"Square End","Cutting Direction":"RH","Type (feature)":"Tapered","Helix Direction":"RH","Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"3/32\" - 0.5\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"2.5\" - 6.25\"","Shank-Sizes":"0.375\" - 0.75\"","Friendly Name":"595","CategoryBrand":"OSG"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FTapered%2FList%20596/End_Mills_-_End_Mill_-_Single_End_Tapered_-_List_596"],"Number of Flutes":"3","Overall Length - Inch (L)":["2.75","3","3.5","2.5625","3.25","2.5","4.5","3.375"],"Diameter - Inch (D)":["0.078125","0.09375","0.125","0.1875","0.25","0.375","0.5"],"Taper Angle Tolerance - Degree":"+0 / -10'","Helix Angle - Degree":"25","Product Overview":"3 Flute, HSS-Co, 7 degree taper","Length of Cut - Inch (Lc)":["1","1.25","1.5","0.75","2.25"],"Shank Diameter - Inch (d)":["0.375","0.5","0.75","0.625"],"Stainless Steels : 17-4PH":"M; Good","Web Literature 4":"800388CA","Diameter - Fractional Size (D)":["5/64","3/32","1/8","3/16","1/4","3/8","1/2"],"Stainless Steels : 300":"M; Good","Taper per Side - Degree (α)":"7","Substrate":"HSS-CO","Length of Cut - Specification":["EXTRA LONG","REGULAR","LONG"],"Web Literature 1":"8002024CA-EM,341|8002024CA-EMT,179","Notes":"Other coatings available upon request.","Surface Treatment":"BRIGHT","Alloy Steels : 4140; 4340":"P; Best","Units":"Inch","Die Steels":"P; Best","Hardened Steels : 35 HRC":"H; Good","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":"Center Cutting","Cast Iron":"K; Good","List Name":"COBALT HSS TPET","Full Description":"High Performance Cobalt HSS End Mills for General Milling Applications","Short Description":"High Performance Cobalt HSS End Mills for General Milling Applications","High Carbon Steel : 1065":"P; Good","Low Carbon Steel : 1010; 1018":"P; Good","View Speed and Feed Page":"Here","View Catalog Page":"Here","Aluminum : 6061; 7075":"N; Good","Stainless Steels : 400":"M; Good","Aluminum : Casting":"N; Good","Coolant Thru":"No","Medium Carbon Steel : 1035; 1045":"P; Good","Weldon Flat":"Yes","Mill Type":"Single End","End Cut Type":"Square End","Cutting Direction":"RH","Type (feature)":"Tapered","Helix Direction":"RH","Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"5/64\" - 0.5\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"2.5\" - 4.5\"","Shank-Sizes":"0.375\" - 0.75\"","Friendly Name":"596","CategoryBrand":"OSG"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FTapered%2FList%20597/End_Mills_-_End_Mill_-_Single_End_Tapered_-_List_597"],"Number of Flutes":"3","Overall Length - Inch (L)":["3.625","2.75","3.375","4.5"],"Shank Diameter - Inch (d)":["0.625","0.5","0.75"],"Diameter - Inch (D)":["0.09375","0.125","0.25"],"Taper Angle Tolerance - Degree":"+0 / -10'","Taper per Side - Degree (α)":"10","Helix Angle - Degree":"25","Product Overview":"3 Flute, HSS-Co, 10 degree taper","Diameter - Fractional Size (D)":["3/32","1/8","1/4"],"Length of Cut - Inch (Lc)":["1.5","0.75","1.25","2.25"],"Stainless Steels : 17-4PH":"M; Good","Web Literature 4":"800388CA","Stainless Steels : 300":"M; Good","Substrate":"HSS-CO","Length of Cut - Specification":["EXTRA LONG","REGULAR","LONG"],"Web Literature 1":"8002024CA-EM,342|8002024CA-EMT,180","Notes":"Other coatings available upon request.","Surface Treatment":"BRIGHT","Alloy Steels : 4140; 4340":"P; Best","Units":"Inch","Die Steels":"P; Best","Hardened Steels : 35 HRC":"H; Good","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":"Center Cutting","Cast Iron":"K; Good","List Name":"COBALT HSS TPET","Full Description":"High Performance Cobalt HSS End Mills for General Milling Applications","Short Description":"High Performance Cobalt HSS End Mills for General Milling Applications","High Carbon Steel : 1065":"P; Good","Low Carbon Steel : 1010; 1018":"P; Good","View Speed and Feed Page":"Here","View Catalog Page":"Here","Aluminum : 6061; 7075":"N; Good","Stainless Steels : 400":"M; Good","Aluminum : Casting":"N; Good","Coolant Thru":"No","Medium Carbon Steel : 1035; 1045":"P; Good","Weldon Flat":"Yes","Mill Type":"Single End","End Cut Type":"Square End","Cutting Direction":"RH","Type (feature)":"Tapered","Helix Direction":"RH","Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"3/32\" - 0.25\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"2.75\" - 4.5\"","Shank-Sizes":"0.5\" - 0.75\"","Friendly Name":"597","CategoryBrand":"OSG"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20620/End_Mills_-_End_Mill_-_EXOMILL_VC-10_-_List_620_-_Catalog"],"Number of Flutes":"2","Diameter - Inch (D)":["0.125","0.1875","0.25","0.3125","0.375","0.5","0.625","0.75","1","1.25","1.5"],"Cutting Diameter Tolerance - Inch":"+0.0011 / -0","Diameter - Fractional Size (D)":["1/8","3/16","1/4","5/16","3/8","1/2","5/8","3/4","1","1-1/4","1-1/2"],"Product Overview":"2 Flute, Regular Length","Length of Cut - Inch (Lc)":["0.375","0.4375","0.5","0.5625","1","1.3125","1.625"],"Overall Length - Inch (L)":["2.3125","3","3.4375","3.5625","4.125"],"Helix Angle - Degree":"30","Shank Diameter - Inch (d)":["0.375","0.5","0.625","0.75","1","1.25"],"Web Literature 4":"800388CA","Web Literature 1":"8002024CA-EM,146|8002024CA-EMT,74","Hardened Steels : 35 HRC":"H; Best","Notes":"Other coatings available upon request.","Surface Treatment":"BRIGHT","Alloy Steels : 4140; 4340":"P; Best","Units":"Inch","Die Steels":"P; Best","Cast Iron":"K; Best","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":"Center Cutting","Stainless Steels : 17-4PH":"M; Best","Stainless Steels : 300":"M; Best","Stainless Steels : 400":"M; Best","High Carbon Steel : 1065":"P; Good","Low Carbon Steel : 1010; 1018":"P; Good","View Speed and Feed Page":"Here","View Catalog Page":"Here","Aluminum : 6061; 7075":"N; Good","Aluminum : Casting":"N; Good","Coolant Thru":"No","Medium Carbon Steel : 1035; 1045":"P; Good","Weldon Flat":"Yes","Mill Type":"Single End","Full Description":"Premium Powdered Metal End Mills for Difficult to Machine Materials","Short Description":"Premium Powdered Metal End Mills for Difficult to Machine Materials","End Cut Type":"Square End","Length of Cut - Specification":["REGULAR","STUB"],"Cutting Direction":"RH","Helix Direction":"RH","Substrate":"VC-10","List Name":"VC-10 CPM-EDS","Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"1/8\" - 1.5\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"2.3125\" - 4.125\"","Shank-Sizes":"0.375\" - 1.25\"","Friendly Name":"620","CategoryBrand":"EXOMILL"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20641/End_Mills_-_End_Mill_-_EXOMIILL_VC-10_-_List_641_-_Catalog"],"Number of Flutes":["4","6"],"Diameter - Inch (D)":["0.125","0.1875","0.25","0.3125","0.375","0.4375","0.5","0.625","0.75","0.875","1","1.25","1.5","2"],"Cutting Diameter Tolerance - Inch":"+0.0011 / -0","Diameter - Fractional Size (D)":["1/8","3/16","1/4","5/16","3/8","7/16","1/2","5/8","3/4","7/8","1","1-1/4","1-1/2","2"],"Length of Cut - Inch (Lc)":["0.375","0.5","0.625","0.75","1","1.25","1.625","1.875","2"],"Overall Length - Inch (L)":["2.3125","2.375","2.4375","2.5","2.6875","3.25","3.75","3.875","4.125","4.5","5.75"],"Helix Angle - Degree":"30","Shank Diameter - Inch (d)":["0.375","0.5","0.625","0.75","0.875","1","1.25","2"],"Web Literature 4":"800388CA","Web Literature 1":"8002024CA-EM,147|8002024CA-EMT,76","Hardened Steels : 35 HRC":"H; Best","Notes":"Other coatings available upon request.","Surface Treatment":"BRIGHT","Alloy Steels : 4140; 4340":"P; Best","Units":"Inch","Die Steels":"P; Best","Cast Iron":"K; Best","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":"Center Cutting","Stainless Steels : 17-4PH":"M; Best","Stainless Steels : 300":"M; Best","Stainless Steels : 400":"M; Best","High Carbon Steel : 1065":"P; Good","Low Carbon Steel : 1010; 1018":"P; Good","View Speed and Feed Page":"Here","View Catalog Page":"Here","Aluminum : 6061; 7075":"N; Good","Aluminum : Casting":"N; Good","Coolant Thru":"No","Medium Carbon Steel : 1035; 1045":"P; Good","Weldon Flat":"Yes","Mill Type":"Single End","Full Description":"Premium Powdered Metal End Mills for Difficult to Machine Materials","Short Description":"Premium Powdered Metal End Mills for Difficult to Machine Materials","End Cut Type":"Square End","Length of Cut - Specification":["REGULAR","STUB"],"Product Overview":"Regular Length, Multiple Flute","Cutting Direction":"RH","Helix Direction":"RH","Substrate":"VC-10","List Name":"VC-10 CPM-CC-EMS","Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"1/8\" - 2\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"2.3125\" - 5.75\"","Shank-Sizes":"0.375\" - 2\"","Friendly Name":"641","CategoryBrand":"EXOMILL"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20646/End_Mills_-_End_Mill_-_EXOMILL_VC-10_-_List_646_-_Catalog"],"Overall Length - Inch (L)":["3.0625","3.25","4","4.625","5.25","5.75","6.5","7.75"],"Number of Flutes":["4","6"],"Diameter - Inch (D)":["0.25","0.375","0.5","0.625","0.75","0.875","1","1.25","1.5","2"],"Cutting Diameter Tolerance - Inch":"+0.0011 / -0","Diameter - Fractional Size (D)":["1/4","3/8","1/2","5/8","3/4","7/8","1","1-1/4","1-1/2","2"],"Length of Cut - Inch (Lc)":["1.25","1.5","2","2.5","3","3.5","4"],"Helix Angle - Degree":"30","Shank Diameter - Inch (d)":["0.375","0.5","0.625","0.75","0.875","1","1.25","2"],"Web Literature 4":"800388CA","Web Literature 1":"8002024CA-EM,148|8002024CA-EMT,76","Hardened Steels : 35 HRC":"H; Best","Notes":"Other coatings available upon request.","Surface Treatment":"BRIGHT","Alloy Steels : 4140; 4340":"P; Best","Units":"Inch","Die Steels":"P; Best","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":"Center Cutting","Cast Iron":"K; Good","Length of Cut - Specification":["LONG","REGULAR"],"Product Overview":"Long Length, Multiple Flute","Stainless Steels : 17-4PH":"M; Best","Stainless Steels : 300":"M; Best","Stainless Steels : 400":"M; Best","High Carbon Steel : 1065":"P; Good","Low Carbon Steel : 1010; 1018":"P; Good","View Speed and Feed Page":"Here","View Catalog Page":"Here","Aluminum : 6061; 7075":"N; Good","Aluminum : Casting":"N; Good","Coolant Thru":"No","Medium Carbon Steel : 1035; 1045":"P; Good","Weldon Flat":"Yes","Mill Type":"Single End","Full Description":"Premium Powdered Metal End Mills for Difficult to Machine Materials","Short Description":"Premium Powdered Metal End Mills for Difficult to Machine Materials","End Cut Type":"Square End","Cutting Direction":"RH","Helix Direction":"RH","Substrate":"VC-10","List Name":"VC-10 CPM-CC-EML","Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"1/4\" - 2\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"3.0625\" - 7.75\"","Shank-Sizes":"0.375\" - 2\"","Friendly Name":"646","CategoryBrand":"EXOMILL"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20660/End_Mills_-_End_Mill_-_EXOMILL_VC-10_-_List_660_-_Catalog"],"Number of Flutes":["3","4"],"Diameter - Inch (D)":["0.25","0.3125","0.375","0.4375","0.5","0.625","0.75","0.875","1"],"Cutting Diameter Tolerance - Inch":"+0.0011 / -0","Diameter - Fractional Size (D)":["1/4","5/16","3/8","7/16","1/2","5/8","3/4","7/8","1"],"Length of Cut - Inch (Lc)":["0.625","0.75","1","1.25","1.625","1.875","2"],"Overall Length - Inch (L)":["2.4375","2.5","2.6875","3.25","3.75","3.875","4.125","4.5"],"Shank Diameter - Inch (d)":["0.375","0.5","0.625","0.75","0.875","1"],"Web Literature 4":"800388CA","Helix Angle - Degree":"50","Web Literature 1":"8002024CA-EM,149|8002024CA-EMT,78","Notes":"Other coatings available upon request.","Surface Treatment":"BRIGHT","Alloy Steels : 4140; 4340":"P; Best","Units":"Inch","Die Steels":"P; Best","Hardened Steels : 35 HRC":"H; Good","Cutting Type":"Center Cutting","Cast Iron":"K; Good","Stainless Steels : 17-4PH":"M; Best","Stainless Steels : 300":"M; Best","Stainless Steels : 400":"M; Best","High Carbon Steel : 1065":"P; Good","Low Carbon Steel : 1010; 1018":"P; Good","View Speed and Feed Page":"Here","View Catalog Page":"Here","Aluminum : 6061; 7075":"N; Good","Aluminum : Casting":"N; Good","Coolant Thru":"No","Medium Carbon Steel : 1035; 1045":"P; Good","Weldon Flat":"Yes","Mill Type":"Single End","Full Description":"Premium Powdered Metal End Mills for Difficult to Machine Materials","Short Description":"Premium Powdered Metal End Mills for Difficult to Machine Materials","End Cut Type":"Square End","Length of Cut - Specification":"REGULAR","Product Overview":"Regular Length, Multiple Flute, Super High Helix","Cutting Direction":"RH","Helix Direction":"RH","Substrate":"VC-10","List Name":"VC-10 CPM-EHS","Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"1/4\" - 1\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"2.4375\" - 4.5\"","Shank-Sizes":"0.375\" - 1\"","Friendly Name":"660","CategoryBrand":"EXOMILL"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FRouters%2FList%20668/Composites_-_Router_-_CARBIDE_AERO-HBC_60_-_List_668_-_Catalog"],"Number of Flutes":"2","Compression Length - Inch (L2)":["0.188","0.281","0.375"],"Diameter - Inch (D)":["0.25","0.375","0.5"],"Diameter - Fractional Size (D)":["1/4","3/8","1/2"],"Product Overview":"2-Flute, Herringbone","Shank Diameter - Inch (d)":["0.25","0.375","0.5"],"Length of Cut - Inch (Lc)":["0.75","2","1"],"Overall Length - Inch (L)":["2.5","3","4"],"Web Literature 4":"800388CA","Helix Angle - Degree":"60","Feature 1":"60° Compression Cutting Angle","List Name":"AERO-HBC 60","Web Literature 1":"8002024CA-EM,334|8002024CA-EMT,173","Web Literature 2":"800212CA-V4","Aramid Fiber (AFRP)":"Other; Best","Surface Treatment":"BRIGHT","Honeycomb: AFRP":"Other; Best","Honeycomb: AI/AI":"Other; Best","Honeycomb: CFRP/AI":"Other; Best","Honeycomb: CFRP/Nomex":"Other; Best","Honeycomb: GFRP/Nomex":"Other; Best","Feature 2":"Bright finish","Substrate":"Carbide","Units":"Inch","Cutting Type":"Center Cutting","Shank Tolerance":"h6","Full Description":"High Performance Routers for Composites (CFRP)","Short Description":"High Performance Routers for Composites (CFRP)","View Speed and Feed Page":"Here","View Catalog Page":"Here","Weldon Flat":"No","Coolant Thru":"No","Mill Type":"Single End","Benefit 1":"Provides sharper cutting edges for shearing fibers and prevents tearout","Benefit 2":"Provides superior sharpness","End Cut Type":"Square End","Length of Cut - Specification":["REGULAR","EXTRA LONG","LONG"],"Cutting Direction":"RH","Cutting Diameter Tolerance - Inch":"+0 / -0.0015","Type (feature)":"Router","Diameter-Sizes":"1/4\" - 0.5\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"2.5\" - 4\"","Shank-Sizes":"0.25\" - 0.5\"","Friendly Name":"668","CategoryBrand":"OSG"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20673/End_Mills_-_End_Mill_-_EXOMINI_VC-10_-_List_673_-_Catalog"],"Number of Flutes":"2","Diameter - Inch (D)":["0.03125","0.046875","0.0625","0.078125","0.09375","0.109375","0.125","0.140625","0.15625","0.171875","0.1875"],"Diameter - Fractional Size (D)":["1/32","3/64","1/16","5/64","3/32","7/64","1/8","9/64","5/32","11/64","3/16"],"Product Overview":"2 Flute, Regular Length, TiN","Shank Diameter - Inch (d)":["0.1875"],"Length of Cut - Inch (Lc)":["0.09375","0.140625","0.1875","0.234375","0.28125","0.328125","0.375","0.40625","0.4375","0.5"],"Overall Length - Inch (L)":["1.875"],"Helix Angle - Degree":"30","Web Literature 4":"800388CA","Web Literature 1":"8002024CA-EM,143|8002024CA-EMT,74","Hardened Steels : 35 HRC":"H; Best","Alloy Steels : 4140; 4340":"P; Best","Units":"Inch","Die Steels":"P; Best","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":"Center Cutting","Cast Iron":"K; Good","Stainless Steels : 17-4PH":"M; Best","Stainless Steels : 300":"M; Best","Stainless Steels : 400":"M; Best","High Carbon Steel : 1065":"P; Good","Low Carbon Steel : 1010; 1018":"P; Good","View Speed and Feed Page":"Here","View Catalog Page":"Here","Aluminum : 6061; 7075":"N; Good","Aluminum : Casting":"N; Good","Weldon Flat":"No","Coolant Thru":"No","Medium Carbon Steel : 1035; 1045":"P; Good","Mill Type":"Single End","Full Description":"Premium Powdered Metal End Mills for Difficult to Machine Materials","Short Description":"Premium Powdered Metal End Mills for Difficult to Machine Materials","End Cut Type":"Square End","Length of Cut - Specification":"REGULAR","Cutting Direction":"RH","Surface Treatment":"TiN","Helix Direction":"RH","Cutting Diameter Tolerance - Inch":["+0 / -0.0011","-0.0004 / -0.0015"],"Substrate":"VC-10","List Name":"VC-10 TIN-CPM-M-EDL","Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"1/32\" - 0.1875\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"1.875\"","Shank-Sizes":"0.1875\"","Friendly Name":"673","CategoryBrand":"EXOMINI"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20676/End_Mills_-_End_Mill_-_EXOMINI_VC-10_-_List_676_-_Catalog"],"Number of Flutes":"4","Diameter - Inch (D)":["0.0625","0.09375","0.125","0.15625","0.1875"],"Cutting Diameter Tolerance - Inch":["+0.0011 / -0","-0.0004 / -0.0015"],"Diameter - Fractional Size (D)":["1/16","3/32","1/8","5/32","3/16"],"Shank Diameter - Inch (d)":["0.1875"],"Length of Cut - Inch (Lc)":["0.09375","0.140625","0.1875","0.234375","0.28125"],"Overall Length - Inch (L)":["1.75"],"Helix Angle - Degree":"30","Product Overview":"4 Flute, Stub Length, Four Flute, Center Cutting (for 1/8 and larger),TiN","Web Literature 4":"800388CA","Web Literature 1":"8002024CA-EM,144|8002024CA-EMT,76","Hardened Steels : 35 HRC":"H; Best","Alloy Steels : 4140; 4340":"P; Best","Units":"Inch","Die Steels":"P; Best","Hardened Steels : 35-45 HRC":"H; Good","Cast Iron":"K; Good","Stainless Steels : 17-4PH":"M; Best","Stainless Steels : 300":"M; Best","Stainless Steels : 400":"M; Best","High Carbon Steel : 1065":"P; Good","Low Carbon Steel : 1010; 1018":"P; Good","View Speed and Feed Page":"Here","View Catalog Page":"Here","Aluminum : 6061; 7075":"N; Good","Aluminum : Casting":"N; Good","Weldon Flat":"No","Coolant Thru":"No","Cutting Type":["Non-Center Cutting","Center Cutting"],"Medium Carbon Steel : 1035; 1045":"P; Good","Mill Type":"Single End","Full Description":"Premium Powdered Metal End Mills for Difficult to Machine Materials","Short Description":"Premium Powdered Metal End Mills for Difficult to Machine Materials","End Cut Type":"Square End","Cutting Direction":"RH","Length of Cut - Specification":"STUB","Surface Treatment":"TiN","Helix Direction":"RH","Substrate":"VC-10","List Name":"VC-10 TIN-CPM-M-EMS","Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"1/16\" - 0.1875\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"1.75\"","Shank-Sizes":"0.1875\"","Friendly Name":"676","CategoryBrand":"EXOMINI"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20677/End_Mills_-_End_Mill_-_EXOMINI_VC-10_-_List_677_-_Catalog"],"Number of Flutes":"4","Diameter - Inch (D)":["0.0625","0.09375","0.125","0.15625","0.1875"],"Cutting Diameter Tolerance - Inch":["+0.0011 / -0","-0.0004 / -0.0015"],"Diameter - Fractional Size (D)":["1/16","3/32","1/8","5/32","3/16"],"Shank Diameter - Inch (d)":["0.1875"],"Length of Cut - Inch (Lc)":["0.1875","0.28125","0.375","0.4375","0.5"],"Overall Length - Inch (L)":["1.875"],"Helix Angle - Degree":"30","Product Overview":"4 Flute, Regular Length, Center Cutting (for 1/8 and larger), TiN","Web Literature 4":"800388CA","Web Literature 1":"8002024CA-EM,145|8002024CA-EMT,76","Hardened Steels : 35 HRC":"H; Best","Alloy Steels : 4140; 4340":"P; Best","Units":"Inch","Die Steels":"P; Best","Hardened Steels : 35-45 HRC":"H; Good","Cast Iron":"K; Good","Stainless Steels : 17-4PH":"M; Best","Stainless Steels : 300":"M; Best","Stainless Steels : 400":"M; Best","High Carbon Steel : 1065":"P; Good","Low Carbon Steel : 1010; 1018":"P; Good","View Speed and Feed Page":"Here","View Catalog Page":"Here","Aluminum : 6061; 7075":"N; Good","Aluminum : Casting":"N; Good","Weldon Flat":"No","Coolant Thru":"No","Cutting Type":["Non-Center Cutting","Center Cutting"],"Medium Carbon Steel : 1035; 1045":"P; Good","Mill Type":"Single End","Full Description":"Premium Powdered Metal End Mills for Difficult to Machine Materials","Short Description":"Premium Powdered Metal End Mills for Difficult to Machine Materials","End Cut Type":"Square End","Length of Cut - Specification":"REGULAR","Cutting Direction":"RH","Surface Treatment":"TiN","Helix Direction":"RH","Substrate":"VC-10","List Name":"VC-10 TIN-CPM-M-EML","Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"1/16\" - 0.1875\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"1.875\"","Shank-Sizes":"0.1875\"","Friendly Name":"677","CategoryBrand":"EXOMINI"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20690/End_Mills_-_End_Mill_-_EXOTIN_Roughing_-_List_690_-_Roughing_End_Mills_-_Catalog"],"Overall Length - Inch (L)":["3.25","4","3.75","4.625","3.875","5.25","4.125","2.5","2.625","4.25","4.5","6.5","5.5","6.75","7.75"],"Number of Flutes":["4","5","6","8"],"Shank Diameter - Inch (d)":["0.5","0.625","0.75","0.375","1","1.25","2"],"Diameter - Fractional Size (D)":["1/2","5/8","3/4","7/8","1/4","5/16","3/8","1","1-1/4","1-1/2","2"],"Diameter - Inch (D)":["0.5","0.625","0.75","0.875","0.25","0.3125","0.375","1","1.25","1.5","2"],"Length of Cut - Inch (Lc)":["1.25","2","1.625","2.5","3","1.875","0.75","0.875","1.5","4"],"Helix Angle - Degree":"30","Product Overview":"4 Flute, Regular Length, Center Cutting (for 1/8 and larger) TiN, Roughing Cut","Stainless Steels : 17-4PH":"M; Good","Web Literature 4":"800388CA","Substrate":"HSSE","Web Literature 1":"8002024CA-EM,150|8002024CA-EMT,79","List Name":"EXO-TIN-EX-REE","Hardened Steels : 35 HRC":"H; Best","Units":"Inch","Hardened Steels : 35-45 HRC":"H; Good","Cast Iron":"K; Good","Stainless Steels : 300":"M; Best","Alloy Steels : 4140; 4340":"P; Good","Stainless Steels : 400":"M; Best","Die Steels":"P; Good","High Carbon Steel : 1065":"P; Good","Low Carbon Steel : 1010; 1018":"P; Good","View Speed and Feed Page":"Here","View Catalog Page":"Here","Aluminum : 6061; 7075":"N; Good","Aluminum : Casting":"N; Good","Coolant Thru":"No","Cutting Type":"Non-Center Cutting","Medium Carbon Steel : 1035; 1045":"P; Good","Weldon Flat":"Yes","Mill Type":"Single End","Full Description":"Premium Powdered Metal Roughing End Mills for Difficult to Machine Materials","Short Description":"Premium Powdered Metal Roughing End Mills for Difficult to Machine Materials","End Cut Type":"Square End","Length of Cut - Specification":["REGULAR","LONG","STUB"],"Cutting Direction":"RH","Surface Treatment":"TiN","Helix Direction":"RH","Type (feature)":"Roughing","Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"1/4\" - 2\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"2.5\" - 7.75\"","Shank-Sizes":"0.375\" - 2\"","Friendly Name":"690","CategoryBrand":"EXOTIN"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%207020/End_Mills_-_End_Mill_-_EXOCARB_Diamond_-_List_7020_-_Catalog"],"Number of Flutes":"2","Coating Thickness (µm)":["12","20"],"Neck Diameter - Inch (d1)":["0.015","0.028","0.04","0.056","0.07","0.088"],"Neck Length - Inch (L1)":["0.09375","0.25","0.5"],"Diameter - Inch (D)":["0.015625","0.03125","0.046875","0.0625","0.078125","0.09375","0.125","0.15625","0.1875","0.25","0.3125","0.375","0.5"],"Cutting Diameter Tolerance - Inch":"+0 / -0.002","Diameter - Fractional Size (D)":["1/64","1/32","3/64","1/16","5/64","3/32","1/8","5/32","3/16","1/4","5/16","3/8","1/2"],"Shank Diameter - Inch (d)":["0.125","0.15625","0.1875","0.25","0.3125","0.375","0.5"],"Length of Cut - Inch (Lc)":["0.046875","0.09375","0.1875","0.25","0.375","0.5","0.5625","0.75","0.8125","0.875","1"],"Overall Length - Inch (L)":["1.75","2","2.5","3"],"Helix Angle - Degree":"30","Web Literature 4":"800388CA","Web Literature 1":"8002024CA-EM,91|8002024CA-EMT,49","Graphite":"Other; Best","Substrate":"Carbide","Units":"Inch","Cutting Type":"Center Cutting","Shank Tolerance":"h6","Surface Treatment":"DIAMOND","List Name":"DIAMOND SQ","Full Description":"High Performance Diamond Coated End Mills for Graphite & Non-Ferrous Materials","Short Description":"High Performance Diamond Coated End Mills for Graphite & Non-Ferrous Materials","View Speed and Feed Page":"Here","View Catalog Page":"Here","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Weldon Flat":"No","Coolant Thru":"No","Mill Type":"Single End","End Cut Type":"Square End","Length of Cut - Specification":["REGULAR","LONG"],"Product Overview":"Standard Series, Stub Length, 2 Flute, OSG Diamond","Cutting Direction":"RH","Helix Direction":"RH","Diameter-Sizes":"1/64\" - 0.5\"","Flute-Sizes":"-","Neck-Sizes":"0.09375\" - 0.5\"","Taper-Sizes":"-","Overall-Sizes":"1.75\" - 3\"","Shank-Sizes":"0.125\" - 0.5\"","Friendly Name":"7020","CategoryBrand":"EXOCARB"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%207040/End_Mills_-_End_Mill_-_EXOCARB_Diamond_-_List_7040_-_T6_-_Catalog"],"Coating Thickness (µm)":"12","Number of Flutes":"4","Neck Diameter - Inch (d1)":["0.056","0.07","0.088"],"Neck Length - Inch (L1)":["0.5"],"Diameter - Inch (D)":["0.0625","0.078125","0.09375","0.125","0.1875","0.25","0.3125","0.375","0.5"],"Cutting Diameter Tolerance - Inch":"+0 / -0.002","Diameter - Fractional Size (D)":["1/16","5/64","3/32","1/8","3/16","1/4","5/16","3/8","1/2"],"Shank Diameter - Inch (d)":["0.125","0.1875","0.25","0.3125","0.375","0.5"],"Length of Cut - Inch (Lc)":["0.1875","0.25","0.375","0.5","0.75","0.8125","0.875","1"],"Overall Length - Inch (L)":["1.75","2","2.5","3"],"Helix Angle - Degree":"30","Web Literature 4":"800388CA","Web Literature 1":"8002024CA-EM,93|8002024CA-EMT,49","Graphite":"Other; Best","Substrate":"Carbide","Units":"Inch","Cutting Type":"Center Cutting","Shank Tolerance":"h6","Surface Treatment":"DIAMOND","List Name":"DIAMOND D-GF-EMS","Full Description":"High Performance Diamond Coated End Mills for Graphite & Non-Ferrous Materials","Short Description":"High Performance Diamond Coated End Mills for Graphite & Non-Ferrous Materials","View Speed and Feed Page":"Here","View Catalog Page":"Here","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Weldon Flat":"No","Coolant Thru":"No","Mill Type":"Single End","End Cut Type":"Square End","Length of Cut - Specification":["REGULAR","LONG"],"Product Overview":"Standard Series, Regular Length, 4 Flute, OSG Diamond","Cutting Direction":"RH","Helix Direction":"RH","Diameter-Sizes":"1/16\" - 0.5\"","Flute-Sizes":"-","Neck-Sizes":"0.5\"","Taper-Sizes":"-","Overall-Sizes":"1.75\" - 3\"","Shank-Sizes":"0.125\" - 0.5\"","Friendly Name":"7040","CategoryBrand":"EXOCARB"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%207041/End_Mills_-_End_Mill_-_EXOCARB_Diamond_-_List_7041_-_Catalog"],"Overall Length - Inch (L)":["3","4","5"],"Coating Thickness (µm)":"12","Number of Flutes":"4","Diameter - Inch (D)":["0.125","0.1875","0.25","0.375","0.5"],"Cutting Diameter Tolerance - Inch":"+0 / -0.002","Diameter - Fractional Size (D)":["1/8","3/16","1/4","3/8","1/2"],"Shank Diameter - Inch (d)":["0.125","0.1875","0.25","0.375","0.5"],"Length of Cut - Inch (Lc)":["1","1.5","2"],"Helix Angle - Degree":"30","Web Literature 4":"800388CA","Length of Cut - Specification":["EXTRA LONG","LONG"],"Web Literature 1":"8002024CA-EM,95|8002024CA-EMT,49","Graphite":"Other; Best","Substrate":"Carbide","Units":"Inch","Cutting Type":"Center Cutting","Shank Tolerance":"h6","Surface Treatment":"DIAMOND","List Name":"DIAMOND D-GF-EML","Full Description":"High Performance Diamond Coated End Mills for Graphite & Non-Ferrous Materials","Short Description":"High Performance Diamond Coated End Mills for Graphite & Non-Ferrous Materials","View Speed and Feed Page":"Here","View Catalog Page":"Here","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Weldon Flat":"No","Coolant Thru":"No","Mill Type":"Single End","End Cut Type":"Square End","Product Overview":"Standard Series, Long Length, 4 Flute, OSG Diamond","Cutting Direction":"RH","Helix Direction":"RH","Diameter-Sizes":"1/8\" - 0.5\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"3\" - 5\"","Shank-Sizes":"0.125\" - 0.5\"","Friendly Name":"7041","CategoryBrand":"EXOCARB"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%207042/End_Mills_-_End_Mill_-_EXOCARB_Diamond_-_List_7042_-_Catalog"],"Overall Length - Inch (L)":["3","4","6"],"Coating Thickness (µm)":"12","Number of Flutes":"4","Neck Diameter - Inch (d1)":["0.059","0.089","0.119","0.178","0.238","0.297","0.356","0.475"],"Neck Length - Inch (L1)":["0.313","0.469","0.625","0.938","0.75","1.125","1.5"],"Diameter - Inch (D)":["0.0625","0.09375","0.125","0.1875","0.25","0.3125","0.375","0.5"],"Cutting Diameter Tolerance - Inch":"+0 / -0.002","Diameter - Fractional Size (D)":["1/16","3/32","1/8","3/16","1/4","5/16","3/8","1/2"],"Shank Diameter - Inch (d)":["0.0625","0.09375","0.125","0.1875","0.25","0.3125","0.375","0.5"],"Length of Cut - Inch (Lc)":["0.0625","0.09375","0.125","0.1875","0.25","0.3125","0.375","0.5"],"Helix Angle - Degree":"30","Web Literature 4":"800388CA","Web Literature 1":"8002024CA-EM,96|8002024CA-EMT,49","Graphite":"Other; Best","Substrate":"Carbide","Units":"Inch","Cutting Type":"Center Cutting","Type (feature)":"Long Shank","Shank Tolerance":"h6","Surface Treatment":"DIAMOND","List Name":"DIAMOND LS-SQ","Full Description":"High Performance Diamond Coated End Mills for Graphite & Non-Ferrous Materials","Short Description":"High Performance Diamond Coated End Mills for Graphite & Non-Ferrous Materials","View Speed and Feed Page":"Here","View Catalog Page":"Here","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Weldon Flat":"No","Coolant Thru":"No","Mill Type":"Single End","End Cut Type":"Square End","Product Overview":"Standard Series, Stub Length, 4 Flute, Long Shank, OSG Diamond","Cutting Direction":"RH","Length of Cut - Specification":"STUB","Helix Direction":"RH","Diameter-Sizes":"1/16\" - 0.5\"","Flute-Sizes":"-","Neck-Sizes":"0.313\" - 1.5\"","Taper-Sizes":"-","Overall-Sizes":"3\" - 6\"","Shank-Sizes":"0.0625\" - 0.5\"","Friendly Name":"7042","CategoryBrand":"EXOCARB"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%207120/End_Mills_-_End_Mill_-_EXOCARB_Diamond_-_List_7120_-_Catalog"],"Number of Flutes":"2","Length of Cut - Metric (Lc)":["4","10","15","20","25","30"],"Coating Thickness (µm)":"12","Neck Diameter - Metric (d1)":["0.95","1.95"],"Overall Length - Metric (L)":["45","50","55","63","75"],"Shank Diameter - Metric (d)":["3","4","6","8","10","12"],"Cutting Diameter Tolerance - Metric":"+0 / -0.050","Neck Length - Metric (L1)":["4.95","11.95"],"Diameter - Metric (D)":["1","2","3","4","6","8","10","12"],"Helix Angle - Degree":"30","Web Literature 4":"800388CA","Web Literature 1":"8002024CA-EM,92|8002024CA-EMT,49","Graphite":"Other; Best","Substrate":"Carbide","Cutting Type":"Center Cutting","Length of Cut - Specification":["LONG","REGULAR"],"Shank Tolerance":"h6","Surface Treatment":"DIAMOND","List Name":"DIAMOND D-RG-EDS","Full Description":"High Performance Diamond Coated End Mills for Graphite & Non-Ferrous Materials","Short Description":"High Performance Diamond Coated End Mills for Graphite & Non-Ferrous Materials","View Speed and Feed Page":"Here","View Catalog Page":"Here","Units":"Metric","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Weldon Flat":"No","Coolant Thru":"No","Mill Type":"Single End","End Cut Type":"Square End","Product Overview":"Standard Series, Regular Length, 2 Flute, OSG Diamond","Cutting Direction":"RH","Helix Direction":"RH","Diameter-Sizes":"1mm - 12mm","Flute-Sizes":"-","Neck-Sizes":"4.95mm - 11.95mm","Taper-Sizes":"-","Overall-Sizes":"45mm - 75mm","Shank-Sizes":"3mm - 12mm","Friendly Name":"7120","CategoryBrand":"EXOCARB"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%207140/End_Mills_-_End_Mill_-_EXOCARB_Diamond_-_List_7140_-_Catalog"],"Number of Flutes":["2","4"],"Coating Thickness (µm)":"12","Neck Diameter - Metric (d1)":["0.48","0.96","1.43","1.91"],"Overall Length - Metric (L)":["40","45","50","60","75"],"Shank Diameter - Metric (d)":["3","4","6","8","10","12"],"Cutting Diameter Tolerance - Metric":"+0 / -0.020","Neck Length - Metric (L1)":["8"],"Diameter - Metric (D)":["0.5","1","1.5","2","3","4","6","8","10","12"],"Helix Angle - Degree":"30","Length of Cut - Metric (Lc)":["1.5","3","5","6","12","15","20","25"],"Web Literature 4":"800388CA","Web Literature 1":"8002024CA-EM,94|8002024CA-EMT,49","Graphite":"Other; Best","Substrate":"Carbide","Cutting Type":"Center Cutting","Shank Tolerance":"h6","Surface Treatment":"DIAMOND","List Name":"DIAMOND SQ","Full Description":"High Performance Diamond Coated End Mills for Graphite & Non-Ferrous Materials","Short Description":"High Performance Diamond Coated End Mills for Graphite & Non-Ferrous Materials","View Speed and Feed Page":"Here","View Catalog Page":"Here","Units":"Metric","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Weldon Flat":"No","Coolant Thru":"No","Mill Type":"Single End","End Cut Type":"Square End","Length of Cut - Specification":["REGULAR","LONG"],"Product Overview":"Standard Series, Regular Length, 4 Flute, OSG Diamond","Cutting Direction":"RH","Helix Direction":"RH","Diameter-Sizes":"0.5mm - 12mm","Flute-Sizes":"-","Neck-Sizes":"8mm","Taper-Sizes":"-","Overall-Sizes":"40mm - 75mm","Shank-Sizes":"3mm - 12mm","Friendly Name":"7140","CategoryBrand":"EXOCARB"}

{"Number of Flutes":"4","Diameter - Inch (D)":["0.03125","0.046875","0.0625","0.09375","0.125","0.1875","0.25","0.375","0.5"],"Diameter - Fractional Size (D)":["1/32","3/64","1/16","3/32","1/8","3/16","1/4","3/8","1/2"],"Shank Diameter - Inch (d)":["0.125","0.1875","0.25","0.375","0.5"],"Length of Cut - Inch (Lc)":["0.15625","0.234375","0.3125","0.46875","0.625","0.9375","1.25","1.875","2.25"],"Overall Length - Inch (L)":["2.5","3","4","6"],"Helix Angle - Degree":"30","Web Literature 4":"800388CA","Web Literature 1":["8002024CA-EM,97|8002024CA-EMT,50"],"Graphite":"Other; Best","Web Literature 2":"800369CA","Substrate":"Carbide","Units":"Inch","Product Overview":"Carbide, DG Coating, Inch Sizes","Cutting Type":"Center Cutting","Length of Cut - Specification":"LONG","Full Description":"Long Length of Cut DG Coated 4-Fluted Square End Mills for Graphite","Short Description":"Long Length of Cut DG Coated 4-Fluted Square End Mills for Graphite","Shank Tolerance":"h6","Benefit 1":"Low resistance to minimize the chipping of the work piece, Stable diamond crystals for milling graphite","Surface Treatment":"DG","Feature 1":"DG Coating","List Name":"DG-EML","View Speed and Feed Page":"Here","View Catalog Page":"Here","Weldon Flat":"No","Coolant Thru":"No","Mill Type":"Single End","End Cut Type":"Square End","Cutting Direction":"RH","Radius Tolerance - Inch":["+/- 0.00028","+/- 0.00039"],"Helix Direction":"RH","CategoryBrand":"EXOCARB","Diameter-Sizes":"1/32\" - 0.5\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"2.5\" - 6\"","Shank-Sizes":"0.125\" - 0.5\"","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%207440/End_Mills_-_End_Mill_-_EXOCARB_DG-EML_-_List_7440"],"Friendly Name":"7440"}

{"Number of Flutes":"4","Neck Length - Inch (L1)":["0.25","0.5","0.625","1","1.25","1.5","2"],"Diameter - Inch (D)":["0.03125","0.046875","0.0625","0.09375","0.125","0.1875","0.25"],"Diameter - Fractional Size (D)":["1/32","3/64","1/16","3/32","1/8","3/16","1/4"],"Shank Diameter - Inch (d)":["0.125","0.1875","0.25"],"Length of Cut - Inch (Lc)":["0.15625","0.234375","0.3125","0.46875","0.625","0.9375","1.25"],"Overall Length - Inch (L)":["2.5","3","4"],"Helix Angle - Degree":"30","Web Literature 4":"800388CA","Web Literature 1":["8002024CA-EM,98|8002024CA-EMT,51"],"Graphite":"Other; Best","Web Literature 2":"800369CA","Substrate":"Carbide","Units":"Inch","Product Overview":"Carbide, DG Coating, Inch Sizes","Cutting Type":"Center Cutting","Length of Cut - Specification":"LONG","Full Description":"Long Length of Cut DG Coated 4-Fluted Long Neck Square End Mills for Graphite","Short Description":"Long Length of Cut DG Coated 4-Fluted Long Neck Square End Mills for Graphite","Type (feature)":"Long Neck","Shank Tolerance":"h6","Benefit 1":"Low resistance to minimize the chipping of the work piece, Stable diamond crystals for milling graphite","Surface Treatment":"DG","Feature 1":"DG Coating","List Name":"DG-LN-EML","View Speed and Feed Page":"Here","View Catalog Page":"Here","Weldon Flat":"No","Coolant Thru":"No","Mill Type":"Single End","End Cut Type":"Square End","Cutting Direction":"RH","Radius Tolerance - Inch":["+/- 0.00028","+/- 0.00039"],"Helix Direction":"RH","STP Drawing":["Download","Download","Download","Download","Download","Download","Download"],"DXF Drawing":["Download","Download","Download","Download","Download","Download","Download"],"CategoryBrand":"EXOCARB","Diameter-Sizes":"1/32\" - 0.25\"","Flute-Sizes":"-","Neck-Sizes":"0.25\" - 2\"","Taper-Sizes":"-","Overall-Sizes":"2.5\" - 4\"","Shank-Sizes":"0.125\" - 0.25\"","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%207441/End_Mills_-_End_Mill_-_EXOCARB_DG-LN-EML_-_List_7441"],"Friendly Name":"7441"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%208120/End_Mills_-_End_Mill_-_EXOCARB_AERO_-_List_8120_-_Catalog"],"Number of Flutes":"2","Length of Cut - Metric (Lc)":["2.5","4","6","8","10","11","13","16","19","22","26","32"],"Overall Length - Metric (L)":["40","45","50","60","70","75","85","90","100"],"Shank Diameter - Metric (d)":["4","6","8","10","12","16"],"Cutting Diameter Tolerance - Metric":["+0 / -0.020","+0 / -0.030"],"Diameter - Metric (D)":["1","1.5","2","2.5","3","3.5","4","4.5","5","5.5","6","6.5","7","7.5","8","8.5","9","9.5","10","10.5","11","11.5","12","13","14","15","16"],"Helix Angle - Degree":"30","Web Literature 4":"800388CA","Product Overview":"Finishing, Regular Length, 2-Flute","List Name":"AERO CA-RG-EDS","Web Literature 1":"8002024CA-EM,90|8002024CA-EMT,48","Surface Treatment":"BRIGHT","Substrate":"Carbide","Cutting Type":"Center Cutting","Shank Tolerance":"h6","Full Description":"High Performance Carbide Finishing End Mill for Aluminum","Short Description":"High Performance Carbide Finishing End Mill for Aluminum","View Speed and Feed Page":"Here","View Catalog Page":"Here","Units":"Metric","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Weldon Flat":"No","Coolant Thru":"No","Mill Type":"Single End","End Cut Type":"Square End","Length of Cut - Specification":["REGULAR","LONG","STUB"],"Cutting Direction":"RH","Helix Direction":"RH","Diameter-Sizes":"1mm - 16mm","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"40mm - 100mm","Shank-Sizes":"4mm - 16mm","Friendly Name":"8120","CategoryBrand":"EXOCARB"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%208200/End_Mills_-_End_Mill_-_A_Brand_AE-VMS_-_List_8200_-_Type_1","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%208200/End_Mills_-_End_Mill_-_A_Brand_AE-VMS_-_List_8200_-_Catalog","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%208200/End_Mills_-_End_Mill_-_A_Brand_AE-VMS_-_List_8200_-_Face","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%208200/End_Mills_-_End_Mill_-_A_Brand_AE-VMS_-_List_8200_-_Angle_2","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%208200/End_Mills_-_End_Mill_-_A_Brand_AE-VMS_-_List_8200_-_Angle_1"],"Number of Flutes":"4","Diameter - Inch (D)":["0.1875","0.25","0.3125","0.375","0.4375","0.5","0.625","0.75","1","0.078125","0.09375","0.109375","0.125","0.1406","0.15625"],"Type":["2","1"],"Shank Diameter - Inch (d)":["0.1875","0.25","0.3125","0.375","0.4375","0.5","0.625","0.75","1","0.125"],"Diameter - Fractional Size (D)":["3/16","1/4","5/16","3/8","7/16","1/2","5/8","3/4","1","5/64","3/32","7/64","1/8","9/64","5/32"],"Length of Cut - Inch (Lc)":["0.4375","0.8125","0.5","0.875","1","0.625","1.25","0.75","1.625","1.5","2","2.5","0.117","0.140625","0.164","0.1875","0.211","0.234375"],"Overall Length - Inch (L)":["2","2.5","2.75","3","3.5","5","4"],"Helix Angle - Degree":"37-40","Feature 4":"Duarise Coating","Feature 2":"High Rigidity","Web Literature 4":"800388CA","Web Literature 3":"80068CA","Full Description":"Advanced Performance Anti-Vibration Carbide End Mills","Short Description":"Advanced Performance Anti-Vibration Carbide End Mills","Web Video 1":"https://youtu.be/4KqR49Qc4Wk","Web Video 3":"https://youtu.be/6tx7FE7dmNY","Benefit 3":"Facilitates excellent chip evacuation","List Name":"AE-VMS","Web Literature 1":"8002024CA-EM,39|8002024CA-EMT,4","Hardened Steels : 35 HRC":"H; Best","Web Video 2":"https://youtu.be/SYYBhdrSpoM","Web Literature 2":"800292CA-V5","Benefit 2":"Improves milling accuracy","Alloy Steels : 4140; 4340":"P; Best","Substrate":"Carbide","Units":"Inch","Die Steels":"P; Best","Product Overview":"Carbide, DUR Coating, 4 Flute, Square End, Multiple Lengths","Cast Iron":"K; Best","High Carbon Steel : 1065":"P; Best","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":"Center Cutting","Low Carbon Steel : 1010; 1018":"P; Best","Medium Carbon Steel : 1035; 1045":"P; Best","Stainless Steels : 17-4PH":"M; Best","Shank Tolerance":"h6","Stainless Steels : 300":"M; Best","Surface Treatment":"DUARISE","Stainless Steels : 400":"M; Best","View Speed and Feed Page":"Here","View Catalog Page":"Here","Aluminum : 6061; 7075":"N; Good","Aluminum : Casting":"N; Good","Feature 3":"New Flute Form","Benefit 4":"Minimizes thermal cracks","Weldon Flat":"No","Coolant Thru":"No","Feature 1":"Positive Rake Angle","Mill Type":"Single End","Benefit 1":"Reduces Cutting Force","End Cut Type":"Square End","Length of Cut - Specification":["REGULAR","STUB"],"Cutting Direction":"RH","Helix Direction":"RH","Cutting Diameter Tolerance - Inch":["+0 / -0.0008","+0 / -0.0012"],"Nickel Alloy : Inconel":"S; Good","Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"5/64\" - 1\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"2\" - 5\"","Shank-Sizes":"0.125\" - 1\"","Friendly Name":"8200","CategoryBrand":"A Brand"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%208201/End_Mills_-_End_Mill_-_A_Brand_AE-VML_-_List_8201_-_Catalog","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%208201/End_Mills_-_End_Mill_-_A_Brand_AE-VM_-_List_8201_-_AE-VML","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%208201/End_Mills_-_End_Mill_-_A_Brand_AE-VML_-_List_8201_-_12x38_-_Side_-_2","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%208201/End_Mills_-_End_Mill_-_A_Brand_AE-VML_-_List_8201_-_12x38_-_Side_-_1","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%208201/End_Mills_-_End_Mill_-_A_Brand_AE-VML_-_List_8201_-_12x38_-_Face","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%208201/End_Mills_-_End_Mill_-_A_Brand_AE-VML_-_List_8201_-_12x38_-_Catalog"],"Overall Length - Inch (L)":["2.75","3.5","3.75","4","4.5","5","5.5","6","7"],"Number of Flutes":["4","5"],"Diameter - Inch (D)":["0.25","0.3125","0.375","0.5","0.625","0.75","1"],"Diameter - Fractional Size (D)":["1/4","5/16","3/8","1/2","5/8","3/4","1"],"Shank Diameter - Inch (d)":["0.25","0.3125","0.375","0.5","0.625","0.75","1"],"Length of Cut - Inch (Lc)":["0.75","1","0.9375","1.25","1.125","1.5","2","1.875","2.5","2.25","3","4"],"Feature 4":"Duarise Coating","Feature 2":"High Rigidity","Helix Angle - Degree":"42-44","Web Literature 4":"800388CA","Full Description":"Advanced Performance Anti-Vibration Carbide End Mills","Short Description":"Advanced Performance Anti-Vibration Carbide End Mills","Benefit 3":"Facilitates excellent chip evacuation","List Name":"AE-VML","Web Video 2":"https://youtu.be/L2OILf73yQc","Web Literature 1":"8002024CA-EM,42|8002024CA-EMT,6","Hardened Steels : 35 HRC":"H; Best","Web Video 1":"https://youtu.be/rSQmoEyDRn0","Web Video 3":"https://youtu.be/siKW3ZaAcec","Web Literature 2":"800292CA-V5","Hardened Steels : 35-45 HRC":"H; Best","Benefit 2":"Improves milling accuracy","Alloy Steels : 4140; 4340":"P; Best","Substrate":"Carbide","Units":"Inch","Die Steels":"P; Best","Product Overview":"Carbide, DUR Coating, 4 Flute, Square End, Long Lengths","Cast Iron":"K; Best","High Carbon Steel : 1065":"P; Best","Cutting Type":"Center Cutting","Low Carbon Steel : 1010; 1018":"P; Best","Hardened Steels : 45-50 HRC":"H; Good","Medium Carbon Steel : 1035; 1045":"P; Best","Stainless Steels : 17-4PH":"M; Best","Shank Tolerance":"h6","Stainless Steels : 300":"M; Best","Surface Treatment":"DUARISE","Stainless Steels : 400":"M; Best","View Speed and Feed Page":"Here","View Catalog Page":"Here","Aluminum : 6061; 7075":"N; Good","Aluminum : Casting":"N; Good","Feature 3":"New Flute Form","Benefit 4":"Minimizes thermal cracks","Weldon Flat":"No","Coolant Thru":"No","Feature 1":"Positive Rake Angle","Mill Type":"Single End","Benefit 1":"Reduces Cutting Force","End Cut Type":"Square End","Length of Cut - Specification":["REGULAR","LONG"],"Cutting Direction":"RH","Helix Direction":"RH","Cutting Diameter Tolerance - Inch":["+0 / -0.0008","+0 / -0.0012"],"Nickel Alloy : Inconel":"S; Good","Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"1/4\" - 1\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"2.75\" - 7\"","Shank-Sizes":"0.25\" - 1\"","Friendly Name":"8201","CategoryBrand":"A Brand"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%208202/End_Mills_-_End_Mill_-_A_Brand_AE-VM_-_List_8202_-_AE-NIK-VML_-_Catalog_1","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%208202/End_Mills_-_End_Mill_-_A_Brand_AE-VM_-_List_8202_-_AE-NIK-VML_-_12x48_-_Face"],"Overall Length - Inch (L)":["2.75","3.5","3.75","4","4.5","5","5.5","6","7"],"Number of Flutes":["4","5"],"Diameter - Inch (D)":["0.25","0.3125","0.375","0.5","0.625","0.75","1"],"Diameter - Fractional Size (D)":["1/4","5/16","3/8","1/2","5/8","3/4","1"],"Shank Diameter - Inch (d)":["0.25","0.3125","0.375","0.5","0.625","0.75","1"],"Length of Cut - Inch (Lc)":["0.75","1","0.9375","1.25","1.125","1.5","2","1.875","2.5","2.25","3","4"],"Feature 4":"Duarise Coating","Feature 2":"High Rigidity","Helix Angle - Degree":"42-44","Web Literature 4":"800388CA","Full Description":"Advanced Performance Anti-Vibration Carbide End Mills","Short Description":"Advanced Performance Anti-Vibration Carbide End Mills","Benefit 3":"Facilitates excellent chip evacuation","List Name":"AE-NIK-VML","Web Video 2":"https://youtu.be/L2OILf73yQc","Web Literature 1":"8002024CA-EM,44|8002024CA-EMT,6","Hardened Steels : 35 HRC":"H; Best","Web Video 1":"https://youtu.be/rSQmoEyDRn0","Web Video 3":"https://youtu.be/siKW3ZaAcec","Web Literature 2":"800292CA-V5","Hardened Steels : 35-45 HRC":"H; Best","Benefit 2":"Improves milling accuracy","Alloy Steels : 4140; 4340":"P; Best","Substrate":"Carbide","Units":"Inch","Die Steels":"P; Best","Product Overview":"Carbide, DUR Coating, 4 Flute, Square End, Long Lengths, Nicked","Cast Iron":"K; Best","High Carbon Steel : 1065":"P; Best","Cutting Type":"Center Cutting","Low Carbon Steel : 1010; 1018":"P; Best","Hardened Steels : 45-50 HRC":"H; Good","Medium Carbon Steel : 1035; 1045":"P; Best","Stainless Steels : 17-4PH":"M; Best","Shank Tolerance":"h6","Stainless Steels : 300":"M; Best","Surface Treatment":"DUARISE","Stainless Steels : 400":"M; Best","View Speed and Feed Page":"Here","View Catalog Page":"Here","Aluminum : 6061; 7075":"N; Good","Aluminum : Casting":"N; Good","Feature 3":"New Flute Form","Type (feature)":"Nicked","Benefit 4":"Minimizes thermal cracks","Weldon Flat":"No","Coolant Thru":"No","Feature 1":"Positive Rake Angle","Mill Type":"Single End","Benefit 1":"Reduces Cutting Force","End Cut Type":"Square End","Length of Cut - Specification":["REGULAR","LONG"],"Cutting Direction":"RH","Helix Direction":"RH","Cutting Diameter Tolerance - Inch":["+0 / -0.0008","+0 / -0.0012"],"Nickel Alloy : Inconel":"S; Good","Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"1/4\" - 1\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"2.75\" - 7\"","Shank-Sizes":"0.25\" - 1\"","Friendly Name":"8202","CategoryBrand":"A Brand"}

{"Diameter - Metric (D)":["3","4","5","6","8","10","12","16","20","25"],"Length of Cut - Metric (Lc)":["8","11","13","19","22","26","32","40","50"],"Number of Flutes":"4","Overall Length - Metric (L)":["60","70","80","90","100","110","120"],"Cutting Diameter Tolerance - Metric":["+0 / -0.020","+0 / -0.030"],"Shank Diameter - Metric (d)":["6","8","10","12","16","20","25"],"Type":["1","2"],"Helix Angle - Degree":"37-40","Surface Treatment":["DUARISE","DUROREY"],"Feature 4":"Duarise Coating","Feature 2":"High Rigidity","Web Literature 4":"800388CA","Web Literature 3":"80068CA","Full Description":["Advanced Performance Anti-Vibration Carbide End Mills"],"Short Description":"Advanced Performance Anti-Vibration Carbide End Mills","Web Video 1":"https://youtu.be/4KqR49Qc4Wk","Web Video 3":"https://youtu.be/6tx7FE7dmNY","Benefit 3":"Facilitates excellent chip evacuation","List Name":["AE-VMS","AE-VMSX"],"Web Literature 1":"8002024CA-EM,40|8002024CA-EMT,4","Hardened Steels : 35 HRC":"H; Best","Web Video 2":"https://youtu.be/SYYBhdrSpoM","Web Literature 2":"800292CA-V5","Benefit 2":"Improves milling accuracy","Alloy Steels : 4140; 4340":"P; Best","Substrate":"Carbide","Die Steels":"P; Best","Product Overview":"Carbide, DUR Coating, 4 Flute, Square End, Regular Lengths","Cast Iron":"K; Best","High Carbon Steel : 1065":["P; Best","P; Good"],"Hardened Steels : 35-45 HRC":["H; Good","H; Best"],"Cutting Type":"Center Cutting","Low Carbon Steel : 1010; 1018":["P; Best","P; Good"],"Medium Carbon Steel : 1035; 1045":["P; Best","P; Good"],"Stainless Steels : 17-4PH":["M; Best","M; Good"],"Shank Tolerance":"h6","Stainless Steels : 300":["M; Best","M; Good"],"Stainless Steels : 400":["M; Best","M; Good"],"View Speed and Feed Page":"Here","View Catalog Page":"Here","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Good","Units":"Metric","Aluminum : Casting":"N; Good","Feature 3":"New Flute Form","Benefit 4":"Minimizes thermal cracks","Weldon Flat":"No","Feature 1":"Positive Rake Angle","Mill Type":"Single End","Benefit 1":"Reduces Cutting Force","End Cut Type":"Square End","Length of Cut - Specification":["REGULAR","Regular"],"Cutting Direction":"RH","Helix Direction":"RH","Nickel Alloy : Inconel":"S; Good","Titanium : 6AL4V (30HRC)":"S; Good","DXF Drawing":["Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download"],"STP Drawing":["Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download"],"Catalog Page Number(s)":"835","Aramid Fiber (AFRP)":"-","Bottom Edge Radius - Metric (R2)":"-","Brass, Bronze":"-","Carbon Fiber (CFRP)":"-","Carbon Fiber / Al / Ti / CRES Stack":"-","Carbon Fiber / Aluminum Stack":"-","Carbon Fiber / Titanium Stack":"-","Carbon/Carbon":"-","Coating Thickness (µm)":"-","Cobalt-Chrome":"-","Compatible Machine":"-","Compression Length - Inch (L2)":"-","Contour Milling":"-","Corner Chamfer - Inch (C)":"-","Corner Chamfer - Metric (C)":"-","Corner Radius - Inch (R)":"-","Corner Radius - Metric (R)":"-","Cut Incline Angle - Degree (α)":"-","Cut Incline Angle Tolerance - Degree":"-","Cutting Diameter Tolerance - Inch":"-","Deep Side Milling":"-","Diameter - Fractional Size (D)":"-","Diameter - Inch (D)":"-","Diameter at Center of Radius - Metric (dm)":"-","Edge Radius - Metric (R3)":"-","Effective Diameter - Inch (DCF)":"-","Effective Diameter - Metric (DCF)":"-","Effective Draft Angle - Degree (α)":"-","Effective Neck Length by Incline Angle 0.5° - Inch":"-","Effective Neck Length by Incline Angle 0.5° - Metric":"-","Effective Neck Length by Incline Angle 0° - Inch":"-","Effective Neck Length by Incline Angle 0° - Metric":"-","Effective Neck Length by Incline Angle 1.5° - Inch":"-","Effective Neck Length by Incline Angle 1.5° - Metric":"-","Effective Neck Length by Incline Angle 1° - Inch":"-","Effective Neck Length by Incline Angle 1° - Metric":"-","Effective Neck Length by Incline Angle 2.5° - Metric":"-","Effective Neck Length by Incline Angle 2° - Inch":"-","Effective Neck Length by Incline Angle 2° - Metric":"-","Effective Neck Length by Incline Angle 3° - Inch":"-","Effective Neck Length by Incline Angle 3° - Metric":"-","Effective Radius - Metric (rt)":"-","Form Tolerance - Metric":"-","Glass Ceramics":"-","Glass Fiber (GFRP)":"-","Graphite":"-","Hardened Steels : 45-50 HRC":"H; Best","Hardened Steels : 50-70 HRC":"H; Good","Helical Milling":"-","Honeycomb: AFRP":"-","Honeycomb: AI/AI":"-","Honeycomb: CFRP/AI":"-","Honeycomb: CFRP/Nomex":"-","Honeycomb: GFRP/Nomex":"-","Hybrid Ceramic / Composite":"-","Included Angle - Degree (α)":"-","Interference Angle - Degree (α)":"-","L/D Ratio":"-","Length of Cut - Inch (Lc)":"-","Length to Center of Radius - Metric (Lm)":"-","Magnesium":"-","Neck Diameter - Inch (d1)":"-","Neck Diameter - Metric (d1)":"-","Neck Diameter Max - Inch (d1 Max)":"-","Neck Diameter Max - Metric (d1 Max)":"-","Neck Diameter Min - Inch (d1 Min)":"-","Neck Diameter Min - Metric (d1 Min)":"-","Neck Draft Angle - Degree (ß)":"-","Neck Length - Inch (L1)":"-","Neck Length - Metric (L1)":"-","Neck Taper Angle - Degree (α)":"-","Non-Taper Neck Length - Inch (L2)":"-","Non-Taper Neck Length - Metric (L2)":"-","Notes":"-","Overall Length - Inch (L)":"-","PEEK":"-","Peripheral Edge Radius - Metric (R2)":"-","Plunging":"-","Radius Tolerance - Inch":"-","Radius Tolerance - Metric":"-","Ramping":"-","Shank Diameter - Inch (d)":"-","Side Milling":"-","Slotting":"-","Taper Angle Tolerance - Degree":"-","Taper Diameter - Metric (Ds)":"-","Taper per Side - Degree (α)":"-","Tilt Angle - Degree (α/2)":"-","Tip Radius - Metric (R1)":"-","Titanium":"-","Trochoidal Milling":"-","Type (feature)":"-","Wax/PMMA":"-","Zirconia":"-","CategoryBrand":"A Brand","Diameter-Sizes":"3mm - 25mm","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"60mm - 120mm","Shank-Sizes":"6mm - 25mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%208205/End_Mills_-_End_Mill_-_A_Brand_AE-VMS_-_List_8205_-_Type_1","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%208205/End_Mills_-_End_Mill_-_A_Brand_AE-VMS_-_List_8205_-_Catalog","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%208205/End_Mills_-_End_Mill_-_A_Brand_AE-VMS_-_List_8205_-_Angle_2","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%208205/End_Mills_-_End_Mill_-_A_Brand_AE-VMS_-_List_8205_-_Face","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%208205/End_Mills_-_End_Mill_-_A_Brand_AE-VMS_-_List_8205_-_Angle_1"],"Friendly Name":"8205"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%208206/End_Mills_-_End_Mill_-_A_Brand_AE-VM_-_List_8206_-_AE-VMSS_-_Catalog_1","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%208206/End_Mills_-_End_Mill_-_A_Brand_AE-VM_-_List_8206_-_AE-VMSS_-_Angle_1","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%208206/End_Mills_-_End_Mill_-_A_Brand_AE-VM_-_List_8206_-_AE-VMSS_-_Angle_2","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%208206/End_Mills_-_End_Mill_-_A_Brand_AE-VM_-_List_8206_-_AE-VMSS_-_Face_1","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%208206/End_Mills_-_End_Mill_-_A_Brand_AE-VM_-_List_8206_-_AE-VMSS_-_Catalog_2"],"Diameter - Metric (D)":["3","4","5","6","8","10","12"],"Length of Cut - Metric (Lc)":["4.5","6","7.5","9","12","15","18"],"Number of Flutes":"4","Overall Length - Metric (L)":["45","60","70","75"],"Cutting Diameter Tolerance - Metric":"+0 / -0.020","Shank Diameter - Metric (d)":["6","8","10","12"],"Type":["1","2"],"Helix Angle - Degree":"37-40","Surface Treatment":"DUARISE","Feature 4":"Duarise Coating","Feature 2":"High Rigidity","Web Literature 4":"800388CA","Full Description":"Advanced Performance Anti-Vibration Carbide End Mills","Short Description":"Advanced Performance Anti-Vibration Carbide End Mills","Web Video 3":"https://youtu.be/6tx7FE7dmNY","Benefit 3":"Facilitates excellent chip evacuation","List Name":"AE-VMSS","Web Video 1":"https://youtu.be/hPXDCYAeI1c","Web Literature 1":"8002024CA-EM,35|8002024CA-EMT,2","Hardened Steels : 35 HRC":"H; Best","Web Video 2":"https://youtu.be/vy74ZqJuGIQ","Web Literature 2":"800292CA-V5","Benefit 2":"Improves milling accuracy","Alloy Steels : 4140; 4340":"P; Best","Substrate":"Carbide","Die Steels":"P; Best","Product Overview":"Carbide, DUR Coating, 4 Flute, Square End, Stub Length","Cast Iron":"K; Best","High Carbon Steel : 1065":"P; Best","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":"Center Cutting","Low Carbon Steel : 1010; 1018":"P; Best","Medium Carbon Steel : 1035; 1045":"P; Best","Stainless Steels : 17-4PH":"M; Best","Shank Tolerance":"h6","Stainless Steels : 300":"M; Best","Stainless Steels : 400":"M; Best","View Speed and Feed Page":"Here","View Catalog Page":"Here","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Good","Units":"Metric","Aluminum : Casting":"N; Good","Feature 3":"New Flute Form","Benefit 4":"Minimizes thermal cracks","Weldon Flat":"No","Feature 1":"Positive Rake Angle","Mill Type":"Single End","Benefit 1":"Reduces Cutting Force","End Cut Type":"Square End","Cutting Direction":"RH","Length of Cut - Specification":"STUB","Helix Direction":"RH","Nickel Alloy : Inconel":"S; Good","Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"3mm - 12mm","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"45mm - 75mm","Shank-Sizes":"6mm - 12mm","Friendly Name":"8206","CategoryBrand":"A Brand"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%208207/End_Mills_-_End_Mill_-_A_Brand_AE-VM_-_List_8207_-_AE-VML_-_Catalog"],"Length of Cut - Metric (Lc)":["19","25","31","38","24","32","40","48","50","62","64","80"],"Diameter - Metric (D)":["6","8","10","12","16","20"],"Number of Flutes":["4","5"],"Overall Length - Metric (L)":["70","80","90","100","110","125","135","140","155"],"Cutting Diameter Tolerance - Metric":["+0 / -0.020","+0 / -0.030"],"Shank Diameter - Metric (d)":["6","8","10","12","16","20"],"Surface Treatment":"DUARISE","Feature 4":"Duarise Coating","Feature 2":"High Rigidity","Helix Angle - Degree":"42-44","Web Literature 4":"800388CA","Full Description":"Advanced Performance Anti-Vibration Carbide End Mills","Short Description":"Advanced Performance Anti-Vibration Carbide End Mills","Benefit 3":"Facilitates excellent chip evacuation","List Name":"AE-VML","Web Video 2":"https://youtu.be/L2OILf73yQc","Web Literature 1":"8002024CA-EM,43|8002024CA-EMT,6","Hardened Steels : 35 HRC":"H; Best","Web Video 1":"https://youtu.be/rSQmoEyDRn0","Web Video 3":"https://youtu.be/siKW3ZaAcec","Web Literature 2":"800292CA-V5","Hardened Steels : 35-45 HRC":"H; Best","Benefit 2":"Improves milling accuracy","Alloy Steels : 4140; 4340":"P; Best","Substrate":"Carbide","Die Steels":"P; Best","Product Overview":"Carbide, DUR Coating, 4 Flute, Square End, Long Lengths","Cast Iron":"K; Best","High Carbon Steel : 1065":"P; Best","Cutting Type":"Center Cutting","Low Carbon Steel : 1010; 1018":"P; Best","Hardened Steels : 45-50 HRC":"H; Good","Length of Cut - Specification":"LONG","Medium Carbon Steel : 1035; 1045":"P; Best","Stainless Steels : 17-4PH":"M; Best","Shank Tolerance":"h6","Stainless Steels : 300":"M; Best","Stainless Steels : 400":"M; Best","View Speed and Feed Page":"Here","View Catalog Page":"Here","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Good","Units":"Metric","Aluminum : Casting":"N; Good","Feature 3":"New Flute Form","Benefit 4":"Minimizes thermal cracks","Weldon Flat":"No","Feature 1":"Positive Rake Angle","Mill Type":"Single End","Benefit 1":"Reduces Cutting Force","End Cut Type":"Square End","Cutting Direction":"RH","Helix Direction":"RH","Nickel Alloy : Inconel":"S; Good","Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"6mm - 20mm","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"70mm - 155mm","Shank-Sizes":"6mm - 20mm","Friendly Name":"8207","CategoryBrand":"A Brand"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%208208/End_Mills_-_End_Mill_-_A_Brand_AE-VM_-_List_8208_-_AE-NIK-VML_-_Catalog_1","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%208208/End_Mills_-_End_Mill_-_A_Brand_AE-VM_-_List_8208_-_AE-NIK-VML_-_12x48_-_Side_2","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%208208/End_Mills_-_End_Mill_-_A_Brand_AE-VM_-_List_8208_-_AE-NIK-VML_-_Catalog_2","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%208208/End_Mills_-_End_Mill_-_A_Brand_AE-VM_-_List_8208_-_AE-NIK-VML_-_12x48_-_Side_1","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%208208/End_Mills_-_End_Mill_-_A_Brand_AE-VM_-_List_8208_-_AE-NIK-VML_-_12x48_-_Face"],"Length of Cut - Metric (Lc)":["19","25","31","38","24","32","40","48","50","62","64","80"],"Diameter - Metric (D)":["6","8","10","12","16","20"],"Number of Flutes":["4","5"],"Overall Length - Metric (L)":["70","80","90","100","110","125","135","140","155"],"Cutting Diameter Tolerance - Metric":["+0 / -0.020","+0 / -0.030"],"Shank Diameter - Metric (d)":["6","8","10","12","16","20"],"Surface Treatment":"DUARISE","Feature 4":"Duarise Coating","Feature 2":"High Rigidity","Helix Angle - Degree":"42-44","Web Literature 4":"800388CA","Full Description":"Advanced Performance Anti-Vibration Carbide End Mills","Short Description":"Advanced Performance Anti-Vibration Carbide End Mills","Benefit 3":"Facilitates excellent chip evacuation","List Name":"AE-NIK-VML","Web Video 2":"https://youtu.be/L2OILf73yQc","Web Literature 1":"8002024CA-EM,45|8002024CA-EMT,6","Hardened Steels : 35 HRC":"H; Best","Web Video 1":"https://youtu.be/rSQmoEyDRn0","Web Video 3":"https://youtu.be/siKW3ZaAcec","Web Literature 2":"800292CA-V5","Hardened Steels : 35-45 HRC":"H; Best","Benefit 2":"Improves milling accuracy","Alloy Steels : 4140; 4340":"P; Best","Substrate":"Carbide","Die Steels":"P; Best","Product Overview":"Carbide, DUR Coating, 4 Flute, Square End, Long Lengths, Nicked","Cast Iron":"K; Best","High Carbon Steel : 1065":"P; Best","Cutting Type":"Center Cutting","Low Carbon Steel : 1010; 1018":"P; Best","Hardened Steels : 45-50 HRC":"H; Good","Length of Cut - Specification":"LONG","Medium Carbon Steel : 1035; 1045":"P; Best","Stainless Steels : 17-4PH":"M; Best","Shank Tolerance":"h6","Stainless Steels : 300":"M; Best","Stainless Steels : 400":"M; Best","View Speed and Feed Page":"Here","View Catalog Page":"Here","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Good","Units":"Metric","Aluminum : Casting":"N; Good","Feature 3":"New Flute Form","Type (feature)":"Nicked","Benefit 4":"Minimizes thermal cracks","Weldon Flat":"No","Feature 1":"Positive Rake Angle","Mill Type":"Single End","Benefit 1":"Reduces Cutting Force","End Cut Type":"Square End","Cutting Direction":"RH","Helix Direction":"RH","Nickel Alloy : Inconel":"S; Good","Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"6mm - 20mm","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"70mm - 155mm","Shank-Sizes":"6mm - 20mm","Friendly Name":"8208","CategoryBrand":"A Brand"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%208225/End_Mills_-_End_Mill_-_A_Brand_AE-VM_-_List_8225_-_AE-VMS-RA_-_Catalog_-_Type_2"],"Diameter - Metric (D)":["3","4","5","6"],"Length of Cut - Metric (Lc)":["8","11","13"],"Number of Flutes":"4","Overall Length - Metric (L)":["60"],"Cutting Diameter Tolerance - Metric":"+0 / -0.020","Shank Diameter - Metric (d)":["6"],"Type":["1","2"],"Helix Angle - Degree":"37-40","Surface Treatment":"DUARISE","Feature 3":"Duarise Coating","Web Literature 4":"800388CA","Web Literature 3":"80068CA","Full Description":"Advanced Performance Anti-Vibration Carbide End Mills","Short Description":"Advanced Performance Anti-Vibration Carbide End Mills","Web Video 1":"https://youtu.be/4KqR49Qc4Wk","Web Video 3":"https://youtu.be/6tx7FE7dmNY","Benefit 2":"For enhanced chipping resistance","List Name":"AE-VMS-RA","Feature 2":"Gash Land","Web Literature 1":"8002024CA-EM,41|8002024CA-EMT,4","Hardened Steels : 35 HRC":"H; Best","Web Video 2":"https://youtu.be/SYYBhdrSpoM","Web Literature 2":"800292CA-V5","Alloy Steels : 4140; 4340":"P; Best","Substrate":"Carbide","Die Steels":"P; Best","Product Overview":"Carbide, DUR Coating, 4 Flute, Regular Length, Right Angle Type","Cast Iron":"K; Best","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":"Center Cutting","Low Carbon Steel : 1010; 1018":"P; Best","Medium Carbon Steel : 1035; 1045":"P; Best","Stainless Steels : 17-4PH":"M; Best","Shank Tolerance":"h6","Stainless Steels : 300":"M; Best","Stainless Steels : 400":"M; Best","High Carbon Steel : 1065":"P; Good","View Speed and Feed Page":"Here","View Catalog Page":"Here","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Good","Units":"Metric","Aluminum : Casting":"N; Good","Benefit 1":"Milling straight corners","Benefit 3":"Minimizes thermal cracks","Weldon Flat":"No","Mill Type":"Single End","End Cut Type":"Square End","Length of Cut - Specification":"REGULAR","Cutting Direction":"RH","Helix Direction":"RH","Feature 1":"Unique Cutting Edge","Type (feature)":"Right Angle","Nickel Alloy : Inconel":"S; Good","Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"3mm - 6mm","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"60mm","Shank-Sizes":"6mm","Friendly Name":"8225","CategoryBrand":"A Brand"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%208226/End_Mills_-_End_Mill_-_A_Brand_AE-VM_-_List_8226_-_AE-VMSS-RA"],"Number of Flutes":"4","Overall Length - Metric (L)":["40","45"],"Shank Diameter - Metric (d)":["4","6"],"Cutting Diameter Tolerance - Metric":"+0 / -0.020","Type":["1","2"],"Diameter - Metric (D)":["1","2","3","4","5","6"],"Length of Cut - Metric (Lc)":["1.5","3","4.5","6","7.5","9"],"Helix Angle - Degree":"37-40","Surface Treatment":"DUARISE","Feature 3":"Duarise Coating","Web Literature 4":"800388CA","Full Description":"Advanced Performance Anti-Vibration Carbide End Mills","Short Description":"Advanced Performance Anti-Vibration Carbide End Mills","Web Video 3":"https://youtu.be/6tx7FE7dmNY","Benefit 2":"For enhanced chipping resistance","List Name":"AE-VMSS-RA","Feature 2":"Gash Land","Web Video 1":"https://youtu.be/hPXDCYAeI1c","Web Literature 1":"8002024CA-EM,36|8002024CA-EMT,2","Hardened Steels : 35 HRC":"H; Best","Web Video 2":"https://youtu.be/vy74ZqJuGIQ","Web Literature 2":"800292CA-V5","Alloy Steels : 4140; 4340":"P; Best","Substrate":"Carbide","Die Steels":"P; Best","Product Overview":"Carbide, DUR Coating, 4 Flute, Stub Length, Right Angle Type","Cast Iron":"K; Best","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":"Center Cutting","Low Carbon Steel : 1010; 1018":"P; Best","Medium Carbon Steel : 1035; 1045":"P; Best","Stainless Steels : 17-4PH":"M; Best","Shank Tolerance":"h6","Stainless Steels : 300":"M; Best","Stainless Steels : 400":"M; Best","High Carbon Steel : 1065":"P; Good","View Speed and Feed Page":"Here","View Catalog Page":"Here","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Good","Units":"Metric","Aluminum : Casting":"N; Good","Benefit 1":"Milling straight corners","Benefit 3":"Minimizes thermal cracks","Weldon Flat":"No","Mill Type":"Single End","End Cut Type":"Square End","Cutting Direction":"RH","Length of Cut - Specification":"STUB","Helix Direction":"RH","Feature 1":"Unique Cutting Edge","Type (feature)":"Right Angle","Nickel Alloy : Inconel":"S; Good","Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"1mm - 6mm","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"40mm - 45mm","Shank-Sizes":"4mm - 6mm","Friendly Name":"8226","CategoryBrand":"A Brand"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%208230/End_Mills_-_End_Mill_-_A_Brand_AE-VM_-_List_8230_-_AE-LN-VMSS_-_Catalog","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%208230/End_Mills_-_End_Mill_-_A_Brand_AE-VMSS_-_List_8230_-_12x36_-_Side_-_1","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%208230/End_Mills_-_End_Mill_-_A_Brand_AE-VMSS_-_List_8230_-_12x36_-_Face","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%208230/End_Mills_-_End_Mill_-_A_Brand_AE-VMSS_-_List_8230_-_12x36_-_Side"],"Overall Length - Inch (L)":["3","4","4.125","5","5.25","5.5","7"],"Number of Flutes":"4","Neck Diameter - Inch (d1)":["0.235","0.2425","0.303125","0.36375","0.4","0.485","0.588","0.705","0.94"],"Neck Length - Inch (L1)":["0.75","1.25","1","1.5625","1.1875","1.875","1.3125","1.5","2.25","3.125","3.25","5"],"Diameter - Inch (D)":["0.25","0.3125","0.375","0.4375","0.5","0.625","0.75","1"],"Diameter - Fractional Size (D)":["1/4","5/16","3/8","7/16","1/2","5/8","3/4","1"],"Length of Cut - Inch (Lc)":["0.375","0.4375","0.5","0.547","0.625","0.78","1","1.125"],"Shank Diameter - Inch (d)":["0.25","0.3125","0.375","0.4375","0.5","0.625","0.75","1"],"Helix Angle - Degree":"37-40","Surface Treatment":"DUARISE","Feature 4":"Duarise Coating","Feature 2":"High Rigidity","Web Literature 4":"800388CA","Full Description":"Advanced Performance Anti-Vibration Carbide End Mills","Short Description":"Advanced Performance Anti-Vibration Carbide End Mills","Web Video 3":"https://youtu.be/6tx7FE7dmNY","Benefit 3":"Facilitates excellent chip evacuation","List Name":"AE-LN-VMSS","Web Video 1":"https://youtu.be/hPXDCYAeI1c","Web Literature 1":"8002024CA-EM,37|8002024CA-EMT,3","Hardened Steels : 35 HRC":"H; Best","Web Video 2":"https://youtu.be/vy74ZqJuGIQ","Web Literature 2":"800292CA-V5","Benefit 2":"Improves milling accuracy","Alloy Steels : 4140; 4340":"P; Best","Substrate":"Carbide","Units":"Inch","Die Steels":"P; Best","Product Overview":"Carbide, DUR Coating, 4 Flute, Square End, Stub Length, Long Neck","Cast Iron":"K; Best","High Carbon Steel : 1065":"P; Best","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":"Center Cutting","Low Carbon Steel : 1010; 1018":"P; Best","Type (feature)":"Long Neck","Medium Carbon Steel : 1035; 1045":"P; Best","Stainless Steels : 17-4PH":"M; Best","Shank Tolerance":"h6","Stainless Steels : 300":"M; Best","Stainless Steels : 400":"M; Best","View Speed and Feed Page":"Here","View Catalog Page":"Here","Aluminum : 6061; 7075":"N; Good","Aluminum : Casting":"N; Good","Feature 3":"New Flute Form","Benefit 4":"Minimizes thermal cracks","Weldon Flat":"No","Coolant Thru":"No","Feature 1":"Positive Rake Angle","Mill Type":"Single End","Benefit 1":"Reduces Cutting Force","End Cut Type":"Square End","Cutting Direction":"RH","Length of Cut - Specification":"STUB","Cutting Diameter Tolerance - Inch":["+0 / -0.0008","+0 / -0.0012"],"Helix Direction":"RH","Nickel Alloy : Inconel":"S; Good","Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"1/4\" - 1\"","Flute-Sizes":"-","Neck-Sizes":"0.75\" - 5\"","Taper-Sizes":"-","Overall-Sizes":"3\" - 7\"","Shank-Sizes":"0.25\" - 1\"","Friendly Name":"8230","CategoryBrand":"A Brand"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%208233/OSG_-_Website_-_Product_Overview_-_AE-VTSS","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%208233/OSG_-_Website_-_Product_Overview_-_AE-VTSS_-_1","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%208233/OSG_-_Website_-_Product_Overview_-_AE-VTSS_-_2","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%208233/OSG_-_Website_-_New_Products_-_AE-VTSS","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%208233/End_Mills_-_End_Mill_-_A_Brand_AE-VM_-_List_8233_-_AE-VTSS_-_Catalog","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%208233/OSG_-_Website_-_Product_Overview_-_AE-VTSS_-_3","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%208233/OSG_-_Website_-_Product_Overview_-_AE-VTSS_-_4"],"Number of Flutes":"3","Diameter - Inch (D)":["0.125","0.140625","0.15625","0.1875","0.25","0.375","0.5"],"Diameter - Fractional Size (D)":["1/8","9/64","5/32","3/16","1/4","3/8","1/2"],"Type":["2","1","3"],"Shank Diameter - Inch (d)":["0.125","0.1875","0.25","0.375"],"Length of Cut - Inch (Lc)":["0.1875","0.2109","0.2344","0.2813","0.25","0.375","0.5"],"Overall Length - Inch (L)":["2","2.5"],"Surface Treatment":"DUARISE","Feature 4":"Duarise Coating","Helix Angle - Degree":"40-43","Feature 2":"High Rigidity","Web Literature 4":"800388CA","Full Description":"Advanced Performance Anti-Vibration Carbide End Mills","Short Description":"Advanced Performance Anti-Vibration Carbide End Mills","Benefit 3":"Facilitates excellent chip evacuation","List Name":"AE-VTSS","Web Literature 1":"8002024CA-EM,47|8002024CA-EMT,11","Hardened Steels : 35 HRC":"H; Best","Web Video 1":"https://youtu.be/vCayZctM8bA","Web Literature 2":"800292CA-V5","Benefit 2":"Improves milling accuracy","Alloy Steels : 4140; 4340":"P; Best","Substrate":"Carbide","Units":"Inch","Die Steels":"P; Best","Product Overview":"Carbide, DUR Coating, Square End, 3 Flute, Inch Sizes","Cast Iron":"K; Best","High Carbon Steel : 1065":"P; Best","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":"Center Cutting","Low Carbon Steel : 1010; 1018":"P; Best","Medium Carbon Steel : 1035; 1045":"P; Best","Stainless Steels : 17-4PH":"M; Best","Stainless Steels : 300":"M; Best","Stainless Steels : 400":"M; Best","View Speed and Feed Page":"Here","View Catalog Page":"Here","Aluminum : 6061; 7075":"N; Good","Aluminum : Casting":"N; Good","Feature 3":"New Flute Form","Benefit 4":"Minimizes thermal cracks","Weldon Flat":"No","Coolant Thru":"No","Shank Tolerance":"Shrink Fit","Feature 1":"Positive Rake Angle","Mill Type":"Single End","Benefit 1":"Reduces Cutting Force","End Cut Type":"Square End","Cutting Direction":"RH","Length of Cut - Specification":"STUB","Cutting Diameter Tolerance - Inch":"+0 / -0.0008","Helix Direction":"RH","Titanium : 6AL4V (30HRC)":"S; Good","Neck Length - Inch (L1)":["0.386","0.378"],"Non-Taper Neck Length - Inch (L2)":["0.299","0.323"],"Diameter-Sizes":"1/8\" - 0.5\"","Flute-Sizes":"-","Neck-Sizes":"0.378\" - 0.386\"","Taper-Sizes":"-","Overall-Sizes":"2\" - 2.5\"","Shank-Sizes":"0.125\" - 0.375\"","Friendly Name":"8233","CategoryBrand":"A Brand"}

{"Length of Cut - Metric (Lc)":["9","12","15","18"],"Diameter - Metric (D)":["6","8","10","12"],"Number of Flutes":"4","Neck Diameter - Metric (d1)":["18","30","24","40","50","36","60"],"Overall Length - Metric (L)":["60","70","80","100","90","110"],"Cutting Diameter Tolerance - Metric":"+0 / -0.020","Shank Diameter - Metric (d)":["6","8","10","12"],"Neck Length - Metric (L1)":["5.8","7.7","9.7","11.7"],"Helix Angle - Degree":"37-40","Surface Treatment":"DUARISE","Feature 4":"Duarise Coating","Feature 2":"High Rigidity","Web Literature 4":"800388CA","Full Description":["Advanced Performance Anti-Vibration Carbide End Mills"],"Short Description":"Advanced Performance Anti-Vibration Carbide End Mills","Web Video 3":"https://youtu.be/6tx7FE7dmNY","Benefit 3":"Facilitates excellent chip evacuation","List Name":"AE-LN-VMSS","Web Video 1":"https://youtu.be/hPXDCYAeI1c","Web Literature 1":"8002024CA-EM,38|8002024CA-EMT,3","Hardened Steels : 35 HRC":"H; Best","Web Video 2":"https://youtu.be/vy74ZqJuGIQ","Web Literature 2":"800292CA-V5","Benefit 2":"Improves milling accuracy","Alloy Steels : 4140; 4340":"P; Best","Substrate":"Carbide","Die Steels":"P; Best","Product Overview":"Carbide, DUR Coating, 4 Flute, Square End, Stub Length, Long Neck","Cast Iron":"K; Best","High Carbon Steel : 1065":"P; Best","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":"Center Cutting","Low Carbon Steel : 1010; 1018":"P; Best","Type (feature)":"Long Neck","Medium Carbon Steel : 1035; 1045":"P; Best","Stainless Steels : 17-4PH":"M; Best","Shank Tolerance":"h6","Stainless Steels : 300":"M; Best","Stainless Steels : 400":"M; Best","View Speed and Feed Page":"Here","View Catalog Page":"Here","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Good","Units":"Metric","Aluminum : Casting":"N; Good","Feature 3":"New Flute Form","Benefit 4":"Minimizes thermal cracks","Weldon Flat":"No","Feature 1":"Positive Rake Angle","Mill Type":"Single End","Benefit 1":"Reduces Cutting Force","End Cut Type":"Square End","Cutting Direction":"RH","Length of Cut - Specification":"STUB","Helix Direction":"RH","Nickel Alloy : Inconel":"S; Good","Titanium : 6AL4V (30HRC)":"S; Good","DXF Drawing":["Download","Download","Download","Download","Download","Download","Download","Download"],"STP Drawing":["Download","Download","Download","Download","Download","Download","Download","Download"],"Catalog Page Number(s)":"833","CategoryBrand":"A Brand","Diameter-Sizes":"6mm - 12mm","Flute-Sizes":"-","Neck-Sizes":"5.8mm - 11.7mm","Taper-Sizes":"-","Overall-Sizes":"60mm - 110mm","Shank-Sizes":"6mm - 12mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%208235/End_Mills_-_End_Mill_-_A_Brand_AE-VM_-_List_8235_-_AE-LN-VMSS_-_Catalog","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%208235/End_Mills_-_End_Mill_-_A_Brand_AE-VMSS_-_List_8235_-_12x36_-_Side","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%208235/End_Mills_-_End_Mill_-_A_Brand_AE-VMSS_-_List_8235_-_12x36_-_Side_-_1","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%208235/End_Mills_-_End_Mill_-_A_Brand_AE-VMSS_-_List_8235_-_12x36_-_Face"],"Friendly Name":"8235"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%208245/End_Mills_-_End_Mill_-_A_Brand_AE-VM_-_List_8245_-_AE-VMFE","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%208245/OSG_-_Website_-_New_Products_-_AE-VMFE_AE-CR-VMFE"],"Diameter - Metric (D)":["6","8","10","12"],"Number of Flutes":"4","Overall Length - Metric (L)":["100","110","130","150"],"Shank Diameter - Metric (d)":["4","6","8","10"],"Cutting Diameter Tolerance - Metric":"+0 / -0.020","Feature 2":"2.5 cutting length","Surface Treatment":"DUARISE","Length of Cut - Metric (Lc)":["15","20","25","30"],"Helix Angle - Degree":"40-44","Web Literature 4":"800388CA","Full Description":"Advanced Performance Anti-Vibration Reduced Shank Carbide End Mills","Short Description":"Advanced Performance Anti-Vibration Reduced Shank Carbide End Mills","Web Video 2":"https://youtu.be/9DQuXNlr3Mg","List Name":"AE-VMFE","Web Video 1":"https://youtu.be/KUY4JjytQLg","Web Literature 1":"8002024CA-EM,46|8002024CA-EMT,10","Hardened Steels : 35 HRC":"H; Best","Web Literature 2":"800292CA-V5","Alloy Steels : 4140; 4340":"P; Best","Substrate":"Carbide","Die Steels":"P; Best","Product Overview":"Carbide, DUR Coating, 4 Flute, Long Length, Metric Sizes","Cast Iron":"K; Best","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":"Center Cutting","Low Carbon Steel : 1010; 1018":"P; Best","Shank Tolerance":"h4","Medium Carbon Steel : 1035; 1045":"P; Best","Stainless Steels : 17-4PH":"M; Best","Stainless Steels : 300":"M; Best","Stainless Steels : 400":"M; Best","High Carbon Steel : 1065":"P; Good","View Speed and Feed Page":"Here","View Catalog Page":"Here","Aluminum : 6061; 7075":"N; Good","Benefit 2":"make highly efficient deep side milling possible","Units":"Metric","Aluminum : Casting":"N; Good","Weldon Flat":"No","Coolant Thru":"No","Mill Type":"Single End","Type (feature)":"Reduced Shank","End Cut Type":"Square End","Length of Cut - Specification":"REGULAR","Cutting Direction":"RH","Benefit 3":"suppress chattering up to L/D of 8","Benefit 1":"suppresses streak generation","Notes":"The radius chamfering is not a full radius since it is for preventing streaks during step milling.","Helix Direction":"RH","Feature 1":"R-Shape on the shank side edge","Feature 3":"Variable lead, unequal teeth spacing and microrelief geometry","Nickel Alloy : Inconel":"S; Good","Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"6mm - 12mm","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"100mm - 150mm","Shank-Sizes":"4mm - 10mm","Friendly Name":"8245","CategoryBrand":"A Brand"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%208333/End_Mills_-_End_Mill_-_A_Brand_AE-VM_-_List_8333_-_AE-VTSS_-_Catalog","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%208333/OSG_-_Website_-_New_Products_-_AE-VTSS","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%208333/OSG_-_Website_-_Product_Overview_-_AE-VTSS_-_1","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%208333/OSG_-_Website_-_Product_Overview_-_AE-VTSS_-_2","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%208333/OSG_-_Website_-_Product_Overview_-_AE-VTSS_-_3","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%208333/OSG_-_Website_-_Product_Overview_-_AE-VTSS_-_4","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%208333/OSG_-_Website_-_Product_Overview_-_AE-VTSS"],"Diameter - Metric (D)":["3","4","5","6","8","10","12"],"Number of Flutes":"3","Length of Cut - Metric (Lc)":["4.5","6","8","10","12"],"Overall Length - Metric (L)":["45","50"],"Cutting Diameter Tolerance - Metric":"+0 / -0.020","Shank Diameter - Metric (d)":["6","8","10"],"Type":["1","2","3"],"Neck Length - Metric (L1)":["12.2","11.9","11.7"],"Non-Taper Neck Length - Metric (L2)":["6","7","9"],"Surface Treatment":"DUARISE","Feature 4":"Duarise Coating","Helix Angle - Degree":"40-43","Feature 2":"High Rigidity","Web Literature 4":"800388CA","Full Description":"Advanced Performance Anti-Vibration Carbide End Mills","Short Description":"Advanced Performance Anti-Vibration Carbide End Mills","Benefit 3":"Facilitates excellent chip evacuation","List Name":"AE-VTSS","Web Literature 1":"8002024CA-EM,48|8002024CA-EMT,11","Hardened Steels : 35 HRC":"H; Best","Web Video 1":"https://youtu.be/vCayZctM8bA","Web Literature 2":"800292CA-V5","Benefit 2":"Improves milling accuracy","Alloy Steels : 4140; 4340":"P; Best","Substrate":"Carbide","Die Steels":"P; Best","Product Overview":"Carbide, DUR Coating, Square End, 3 Flute, Metric Sizes","Cast Iron":"K; Best","High Carbon Steel : 1065":"P; Best","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":"Center Cutting","Low Carbon Steel : 1010; 1018":"P; Best","Medium Carbon Steel : 1035; 1045":"P; Best","Stainless Steels : 17-4PH":"M; Best","Stainless Steels : 300":"M; Best","Stainless Steels : 400":"M; Best","View Speed and Feed Page":"Here","View Catalog Page":"Here","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Good","Units":"Metric","Aluminum : Casting":"N; Good","Feature 3":"New Flute Form","Benefit 4":"Minimizes thermal cracks","Weldon Flat":"No","Shank Tolerance":"Shrink Fit","Feature 1":"Positive Rake Angle","Mill Type":"Single End","Benefit 1":"Reduces Cutting Force","End Cut Type":"Square End","Cutting Direction":"RH","Length of Cut - Specification":"STUB","Helix Direction":"RH","Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"3mm - 12mm","Flute-Sizes":"-","Neck-Sizes":"11.7mm - 12.2mm","Taper-Sizes":"-","Overall-Sizes":"45mm - 50mm","Shank-Sizes":"6mm - 10mm","Friendly Name":"8333","CategoryBrand":"A Brand"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%208440/End_Mills_-_End_Mill_-_A_Brand_AE-MS-H_-_List_8440_-_Type_1","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%208440/End_Mills_-_End_Mill_-_A_Brand_AE-MS-H_-_List_8440_-_Type_2"],"Number of Flutes":["4","6","8"],"Neck Length - Inch (L1)":["0.6","0.646","0.698","0.668","0.686","0.825","0.767","0.871","1.033"],"Diameter - Inch (D)":["0.0625","0.078125","0.09375","0.109375","0.125","0.15625","0.1875","0.21875","0.25","0.28125","0.3125","0.375","0.4375","0.5","0.625","0.75","1"],"Type":["1","2"],"Diameter - Fractional Size (D)":["1/16","5/64","3/32","7/64","1/8","5/32","3/16","7/32","1/4","9/32","5/16","3/8","7/16","1/2","5/8","3/4","1"],"Length of Cut - Inch (Lc)":["0.1875","0.25","0.3125","0.375","0.5","0.625","0.75","1","1.125","1.5","1.75","2.5"],"Shank Diameter - Inch (d)":["0.25","0.3125","0.375","0.4375","0.5","0.625","0.75","1"],"Overall Length - Inch (L)":["2.5","2.75","3","3.5","4","4.25","4.5"],"Surface Treatment":"DUROREY","Feature 3":"DUROREY Coating","Helix Angle - Degree":"43","Web Literature 4":"800388CA","Full Description":"Advanced Performance Carbide End Mills with DUROREY Coating","Short Description":"Advanced Performance Carbide End Mills with DUROREY Coating","Web Video 2":"https://youtu.be/9AeCSk4_w24","List Name":"AE-MS-H","Benefit 2":"For stable machining of high-hardness steels","Web Literature 1":"8002024CA-EM,51|8002024CA-EMT,14","Web Video 3":"https://youtu.be/rI8fFq79-vs","Web Video 1":"https://youtu.be/Xo-EmdaTeac","Web Literature 2":"800312CA-V5","Benefit 3":"Outstanding performance in high-hardness steels","Hardened Steels : 45-50 HRC":"H; Best","Hardened Steels : 50-70 HRC":"H; Best","Substrate":"Carbide","Units":"Inch","Hardened Steels : 35 HRC":"H; Good","Product Overview":"Carbide, Durorey Coating, Inch Sizes","Hardened Steels : 35-45 HRC":"H; Good","Shank Tolerance":"h6","Feature 2":"Cutting Edge Geometry","Alloy Steels : 4140; 4340":"P; Good","Die Steels":"P; Good","View Speed and Feed Page":"Here","View Catalog Page":"Here","Weldon Flat":"No","Coolant Thru":"No","Cutting Type":["Non-Center Cutting","Center Cutting"],"Mill Type":"Single End","End Cut Type":"Square End","Length of Cut - Specification":["REGULAR","LONG"],"Cutting Direction":"RH","Benefit 1":"Suppresses chattering","Cutting Diameter Tolerance - Inch":"+0 / -0.0008","Helix Direction":"RH","Feature 1":"Variable Indexing","Diameter-Sizes":"1/16\" - 1\"","Flute-Sizes":"-","Neck-Sizes":"0.6\" - 1.033\"","Taper-Sizes":"-","Overall-Sizes":"2.5\" - 4.5\"","Shank-Sizes":"0.25\" - 1\"","Friendly Name":"8440","CategoryBrand":"A Brand"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%208441/End_Mills_-_End_Mill_-_A_Brand_AE-MSS-H_-_List_8441_-_Type_2","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%208441/End_Mills_-_End_Mill_-_A_Brand_AE-MSS-H_-_List_8441_-_Type_1"],"Number of Flutes":["4","6"],"Neck Diameter - Inch (d1)":["0.0605","0.0761","0.0918","0.1054","0.1191","0.1503","0.1816","0.2128","0.2441","0.2753","0.3066","0.3691","0.4316","0.4921"],"Neck Length - Inch (L1)":["0.304","0.38","0.456","0.532","0.608","0.76","0.912","1.064","1.369"],"Effective Neck Length by Incline Angle 0.5° - Inch":["0.194","0.242","0.29","0.339","0.388","0.485","0.582","0.678","0.872"],"Effective Neck Length by Incline Angle 1.5° - Inch":["0.208","0.259","0.311","0.364","0.416","0.52","0.624"],"Effective Neck Length by Incline Angle 1° - Inch":["0.201","0.25","0.301","0.351","0.401","0.502","0.602","0.705"],"Diameter - Inch (D)":["0.0625","0.078125","0.09375","0.109375","0.125","0.15625","0.1875","0.21875","0.25","0.28125","0.3125","0.375","0.4375","0.5"],"Effective Neck Length by Incline Angle 2° - Inch":["0.216","0.269","0.323","0.377","0.431","0.539","0.647"],"Effective Neck Length by Incline Angle 3° - Inch":["0.234","0.291","0.349","0.408","0.466","0.583"],"Type":["1","2"],"Diameter - Fractional Size (D)":["1/16","5/64","3/32","7/64","1/8","5/32","3/16","7/32","1/4","9/32","5/16","3/8","7/16","1/2"],"Non-Taper Neck Length - Inch (L2)":["0.188","0.234","0.281","0.328","0.375","0.469","0.563","0.656","0.75","0.844","0.938","1.125","1.313","1.5"],"Length of Cut - Inch (Lc)":["0.094","0.117","0.141","0.164","0.188","0.234","0.281","0.328","0.375","0.422","0.469","0.563","0.656","0.75"],"Shank Diameter - Inch (d)":["0.25","0.3125","0.375","0.4375","0.5"],"Overall Length - Inch (L)":["2.5","3","3.5","4"],"Surface Treatment":"DUROREY","Feature 3":"DUROREY Coating","Helix Angle - Degree":"43","Web Literature 4":"800388CA","Interference Angle - Degree (α)":["9.89","8.81","7.77","6.79","5.87","4.16","2.63","1.25","0.99"],"Full Description":"Advanced Performance Carbide End Mills with DUROREY Coating","Short Description":"Advanced Performance Carbide End Mills with DUROREY Coating","List Name":"AE-MSS-H","Benefit 2":"For stable machining of high-hardness steels","Web Literature 1":"8002024CA-EM,49|8002024CA-EMT,13","Web Video 1":"https://youtu.be/Xo-EmdaTeac","Web Literature 2":"800312CA-V5","Benefit 3":"Outstanding performance in high-hardness steels","Hardened Steels : 45-50 HRC":"H; Best","Hardened Steels : 50-70 HRC":"H; Best","Substrate":"Carbide","Units":"Inch","Hardened Steels : 35 HRC":"H; Good","Product Overview":"Carbide, Durorey Coating, Inch Sizes","Hardened Steels : 35-45 HRC":"H; Good","Shank Tolerance":"h6","Feature 2":"Cutting Edge Geometry","Alloy Steels : 4140; 4340":"P; Good","Die Steels":"P; Good","View Speed and Feed Page":"Here","View Catalog Page":"Here","Weldon Flat":"No","Coolant Thru":"No","Cutting Type":["Non-Center Cutting","Center Cutting"],"Mill Type":"Single End","Type (feature)":"Reduced Neck","End Cut Type":"Square End","Cutting Direction":"RH","Length of Cut - Specification":"STUB","Benefit 1":"Suppresses chattering","Cutting Diameter Tolerance - Inch":"+0 / -0.0008","Helix Direction":"RH","Feature 1":"Variable Indexing","Diameter-Sizes":"1/16\" - 0.5\"","Flute-Sizes":"-","Neck-Sizes":"0.304\" - 1.369\"","Taper-Sizes":"-","Overall-Sizes":"2.5\" - 4\"","Shank-Sizes":"0.25\" - 0.5\"","Friendly Name":"8441","CategoryBrand":"A Brand"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%208442/End_Mills_-_End_Mill_-_A_Brand_AE-H_-_List_8442_-_AE-ML-H_-_Type_2","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%208442/End_Mills_-_End_Mill_-_A_Brand_AE-H_-_List_8442_-_AE-ML-H_-_Type_1"],"Number of Flutes":["4","6"],"Neck Length - Inch (L1)":["0.863","1.046"],"Diameter - Inch (D)":["0.125","0.1875","0.25","0.3125","0.375","0.5"],"Type":["1","2"],"Diameter - Fractional Size (D)":["1/8","3/16","1/4","5/16","3/8","1/2"],"Length of Cut - Inch (Lc)":["0.5","0.75","1","1.25","1.5","2"],"Shank Diameter - Inch (d)":["0.25","0.3125","0.375","0.5"],"Overall Length - Inch (L)":["2.5","2.75","3.75","4","4.5"],"Surface Treatment":"DUROREY","Feature 3":"DUROREY Coating","Helix Angle - Degree":"43","Web Literature 4":"800388CA","Web Video 1":"https://youtu.be/6BVdWs7PLI8","Full Description":"Advanced Performance Carbide End Mills with Long LOC for Hardened Steels","Short Description":"Advanced Performance Carbide End Mills with Long LOC for Hardened Steels","List Name":"AE-ML-H","Benefit 2":"For stable machining of high-hardness steels","Web Literature 1":"8002024CA-EM,53|8002024CA-EMT,16","Web Literature 2":"800312CA-V5","Benefit 3":"Outstanding performance in high-hardness steels","Benefit 4":"Improves tool rigidity and prevents the machining surface from tilting","Hardened Steels : 45-50 HRC":"H; Best","Hardened Steels : 50-70 HRC":"H; Best","Substrate":"Carbide","Units":"Inch","Hardened Steels : 35 HRC":"H; Good","Product Overview":"Carbide, Durorey Coating, Inch Sizes","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":"Center Cutting","Length of Cut - Specification":"LONG","Shank Tolerance":"h6","Alloy Steels : 4140; 4340":"P; Good","Die Steels":"P; Good","View Speed and Feed Page":"Here","View Catalog Page":"Here","Weldon Flat":"No","Coolant Thru":"No","Mill Type":"Single End","End Cut Type":"Square End","Cutting Direction":"RH","Benefit 1":"Suppresses chattering","Feature 2":"Suppresses chattering","Cutting Diameter Tolerance - Inch":"+0 / -0.0008","Helix Direction":"RH","Feature 1":"Variable Indexing","Feature 4":"Web taper geometry of core","Diameter-Sizes":"1/8\" - 0.5\"","Flute-Sizes":"-","Neck-Sizes":"0.863\" - 1.046\"","Taper-Sizes":"-","Overall-Sizes":"2.5\" - 4.5\"","Shank-Sizes":"0.25\" - 0.5\"","Friendly Name":"8442","CategoryBrand":"A Brand"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%208540/End_Mills_-_End_Mill_-_A_Brand_AE-MS-H_-_List_8540_-_Type_1","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%208540/End_Mills_-_End_Mill_-_A_Brand_AE-MS-H_-_List_8540_-_Type_2"],"Length of Cut - Metric (Lc)":["4","6","8","2.5","3.8","5","6.3","7.5","10","12.5","15","20","25","30","40","50"],"Number of Flutes":["4","6"],"Overall Length - Metric (L)":["60","70","80","90","105","120"],"Cutting Diameter Tolerance - Metric":"+0 / -0.020","Shank Diameter - Metric (d)":["6","8","10","12","16","20"],"Neck Length - Inch (L1)":["14.4","16.1","17.4","17.1"],"Type":["1","2"],"Diameter - Metric (D)":["1.5","2","2.5","3","1","4","5","6","8","10","12","16","20"],"Surface Treatment":"DUROREY","Feature 3":"DUROREY Coating","Helix Angle - Degree":"43","Web Literature 4":"800388CA","Full Description":"Advanced Performance Carbide End Mills with DUROREY Coating","Short Description":"Advanced Performance Carbide End Mills with DUROREY Coating","Web Video 2":"https://youtu.be/9AeCSk4_w24","List Name":"AE-MS-H","Benefit 2":"For stable machining of high-hardness steels","Web Literature 1":"8002024CA-EM,52|8002024CA-EMT,14","Web Video 3":"https://youtu.be/rI8fFq79-vs","Web Video 1":"https://youtu.be/Xo-EmdaTeac","Web Literature 2":"800312CA-V5","Benefit 3":"Outstanding performance in high-hardness steels","Hardened Steels : 45-50 HRC":"H; Best","Hardened Steels : 50-70 HRC":"H; Best","Substrate":"Carbide","Hardened Steels : 35 HRC":"H; Good","Product Overview":"Carbide, Durorey Coating, Metric Sizes","Hardened Steels : 35-45 HRC":"H; Good","Shank Tolerance":"h6","Feature 2":"Cutting Edge Geometry","Alloy Steels : 4140; 4340":"P; Good","Die Steels":"P; Good","View Speed and Feed Page":"Here","View Catalog Page":"Here","Units":"Metric","Weldon Flat":"No","Coolant Thru":"No","Cutting Type":["Non-Center Cutting","Center Cutting"],"Mill Type":"Single End","End Cut Type":"Square End","Length of Cut - Specification":["REGULAR","LONG"],"Cutting Direction":"RH","Benefit 1":"Suppresses chattering","Helix Direction":"RH","Feature 1":"Variable Indexing","Neck Length - Metric (L1)":["12.7","13","13.9","14.5","15.4","16.1","16.7"],"Diameter-Sizes":"1mm - 20mm","Flute-Sizes":"-","Neck-Sizes":"12.7mm - 17.4\"","Taper-Sizes":"-","Overall-Sizes":"60mm - 120mm","Shank-Sizes":"6mm - 20mm","Friendly Name":"8540","CategoryBrand":"A Brand"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%208541/End_Mills_-_End_Mill_-_A_Brand_AE-MSS-H_-_List_8541_-_Type_2","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%208541/End_Mills_-_End_Mill_-_A_Brand_AE-MSS-H_-_List_8541_-_Type_1"],"Diameter - Metric (D)":["3","4","5","6","8","10","12"],"Length of Cut - Metric (Lc)":["4.5","6","7.5","9","12","15","18"],"Number of Flutes":["4","6"],"Neck Diameter - Metric (d1)":["2.85","3.85","4.85","5.85","7.85","9.85","11.8"],"Effective Neck Length by Incline Angle 0.5° - Metric":["9.46","12.6","15.72"],"Effective Neck Length by Incline Angle 1.5° - Metric":["10.23","13.56","16.88"],"Overall Length - Metric (L)":["45","50","60","80","90","100","110"],"Effective Neck Length by Incline Angle 1° - Metric":["9.87","13.09","16.3"],"Effective Neck Length by Incline Angle 2° - Metric":["10.62","14.07"],"Effective Neck Length by Incline Angle 3° - Metric":["11.48","15.21"],"Cutting Diameter Tolerance - Metric":"+0 / -0.020","Shank Diameter - Metric (d)":["6","8","10","12"],"Type":["1","2"],"Neck Length - Metric (L1)":["14.8","16","17.1"],"Non-Taper Neck Length - Metric (L2)":["9","12","15","18","24","30","36"],"Surface Treatment":"DUROREY","Feature 3":"DUROREY Coating","Helix Angle - Degree":"43","Web Literature 4":"800388CA","Interference Angle - Degree (α)":["5.78","3.59","1.68"],"Full Description":"Advanced Performance Carbide End Mills with DUROREY Coating","Short Description":"Advanced Performance Carbide End Mills with DUROREY Coating","List Name":"AE-MSS-H","Benefit 2":"For stable machining of high-hardness steels","Web Literature 1":"8002024CA-EM,50|8002024CA-EMT,13","Web Video 1":"https://youtu.be/Xo-EmdaTeac","Web Literature 2":"800312CA-V5","Benefit 3":"Outstanding performance in high-hardness steels","Hardened Steels : 45-50 HRC":"H; Best","Hardened Steels : 50-70 HRC":"H; Best","Substrate":"Carbide","Hardened Steels : 35 HRC":"H; Good","Product Overview":"Carbide, Durorey Coating, Metric Sizes","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":"Center Cutting","Shank Tolerance":"h6","Feature 2":"Cutting Edge Geometry","Alloy Steels : 4140; 4340":"P; Good","Die Steels":"P; Good","View Speed and Feed Page":"Here","View Catalog Page":"Here","Units":"Metric","Weldon Flat":"No","Coolant Thru":"No","Mill Type":"Single End","Type (feature)":"Reduced Neck","End Cut Type":"Square End","Cutting Direction":"RH","Length of Cut - Specification":"STUB","Benefit 1":"Suppresses chattering","Helix Direction":"RH","Feature 1":"Variable Indexing","Diameter-Sizes":"3mm - 12mm","Flute-Sizes":"-","Neck-Sizes":"14.8mm - 17.1mm","Taper-Sizes":"-","Overall-Sizes":"45mm - 110mm","Shank-Sizes":"6mm - 12mm","Friendly Name":"8541","CategoryBrand":"A Brand"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%208542/End_Mills_-_End_Mill_-_A_Brand_AE-H_-_List_8542_-_AE-ML-H_-_Type_2","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%208542/End_Mills_-_End_Mill_-_A_Brand_AE-H_-_List_8542_-_AE-ML-H_-_Type_1"],"Diameter - Metric (D)":["3","4","5","6","8","10","12"],"Number of Flutes":["4","6"],"Overall Length - Metric (L)":["60","70","80","100","110"],"Cutting Diameter Tolerance - Metric":"+0 / -0.020","Shank Diameter - Metric (d)":["6","8","10","12"],"Type":["1","2"],"Neck Length - Metric (L1)":["19.9","22.1","24.2"],"Length of Cut - Metric (Lc)":["12","16","20","24","32","40","48"],"Surface Treatment":"DUROREY","Feature 3":"DUROREY Coating","Helix Angle - Degree":"43","Web Literature 4":"800388CA","Web Video 1":"https://youtu.be/6BVdWs7PLI8","Full Description":"Advanced Performance Carbide End Mills with Long LOC for Hardened Steels","Short Description":"Advanced Performance Carbide End Mills with Long LOC for Hardened Steels","List Name":"AE-ML-H","Benefit 2":"For stable machining of high-hardness steels","Web Literature 1":"8002024CA-EM,54|8002024CA-EMT,16","Web Literature 2":"800312CA-V5","Benefit 3":"Outstanding performance in high-hardness steels","Benefit 4":"Improves tool rigidity and prevents the machining surface from tilting","Hardened Steels : 45-50 HRC":"H; Best","Hardened Steels : 50-70 HRC":"H; Best","Substrate":"Carbide","Hardened Steels : 35 HRC":"H; Good","Product Overview":"Carbide, Durorey Coating, Metric Sizes","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":"Center Cutting","Length of Cut - Specification":"LONG","Shank Tolerance":"h6","Alloy Steels : 4140; 4340":"P; Good","Die Steels":"P; Good","View Speed and Feed Page":"Here","View Catalog Page":"Here","Units":"Metric","Weldon Flat":"No","Coolant Thru":"No","Mill Type":"Single End","End Cut Type":"Square End","Cutting Direction":"RH","Benefit 1":"Suppresses chattering","Feature 2":"Suppresses chattering","Helix Direction":"RH","Feature 1":"Variable Indexing","Feature 4":"Web taper geometry of core","Diameter-Sizes":"3mm - 12mm","Flute-Sizes":"-","Neck-Sizes":"19.9mm - 24.2mm","Taper-Sizes":"-","Overall-Sizes":"60mm - 110mm","Shank-Sizes":"6mm - 12mm","Friendly Name":"8542","CategoryBrand":"A Brand"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%208630/End_Mills_-_End_Mill_-_A_Brand_AE-TL-N-5D_-_List_8630"],"Number of Flutes":"3","Diameter - Inch (D)":["0.125","0.1875","0.25","0.3125","0.375","0.5","0.625","0.75","1"],"Diameter - Fractional Size (D)":["1/8","3/16","1/4","5/16","3/8","1/2","5/8","3/4","1"],"Shank Diameter - Inch (d)":["0.125","0.1875","0.25","0.3125","0.375","0.5","0.625","0.75","1"],"Overall Length - Inch (L)":["1.5","2.5","2","2.25","3","4","5","6"],"Length of Cut - Inch (Lc)":["0.375","0.5","0.5625","0.75","1","1.25","0.9375","1.125","1.5","2","2.5","1.875","3.125","2.25","3"],"Helix Angle - Degree":"41","Benefit 2":"High Rigidity and Excellent chip evacuation","Web Literature 4":"800388CA","Benefit 3":"Achieves both rigidity and sharpness","Full Description":"Advanced Performance DLC Coated End Mills for Non-Ferrous Materials","Short Description":"Advanced Performance DLC Coated End Mills for Non-Ferrous Materials","List Name":"AE-TL-N","Benefit 4":"For superior surface accuracy","Web Video 1":"https://youtu.be/iowfXxrjRfg","Web Video 2":"https://youtu.be/NftHWs85xyM","Web Literature 1":"8002024CA-EM,57|8002024CA-EMT,19","Benefit 1":"Ideal for Plunging","Web Literature 2":"800339CA-V5","Web Literature 3":"800379CA|80067CA","Units":"Inch","Substrate":"Carbide","Product Overview":"Carbide, DLC Coated, 3-Flutes, Long Length, Inch Sizes","Feature 2":"Large Core & New Flute Form","Cutting Type":"Center Cutting","Feature 1":"Center Cutting Edge","Surface Treatment":"DLC","Feature 4":"DLC Super Hard Coating","View Speed and Feed Page":"Here","View Catalog Page":"Here","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Weldon Flat":"No","Shank Tolerance":"Shrink Fit","Mill Type":"Single End","End Cut Type":"Square End","Length of Cut - Specification":["REGULAR","LONG"],"Cutting Direction":"RH","Cutting Diameter Tolerance - Inch":"+0 / -0.0008","Helix Direction":"RH","Feature 3":"Unique Cutting Edge","Diameter-Sizes":"1/8\" - 1\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"1.5\" - 6\"","Shank-Sizes":"0.125\" - 1\"","Friendly Name":"8630","CategoryBrand":"A Brand"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%208631/End_Mills_-_End_Mill_-_A_Brand_AE-NIK-TL-N_-_List_8631_-_10_50-N","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%208631/End_Mills_-_End_Mill_-_A_Brand_AE-NIK-TL-N_-_List_8631_-_10_50-N_-_Closeup"],"Number of Flutes":"3","Overall Length - Inch (L)":["3","4","5","6"],"Diameter - Inch (D)":["0.375","0.5","0.625","0.75","1"],"Type":"2","L/D Ratio":["3","4","5"],"Diameter - Fractional Size (D)":["3/8","1/2","5/8","3/4","1"],"Length of Cut - Inch (Lc)":["1.125","1.5","2","2.5","1.875","3.125","2.25","3"],"Shank Diameter - Inch (d)":["0.375","0.5","0.625","0.75","1"],"Helix Angle - Degree":"41","Web Literature 4":"800388CA","List Name":"AE-NIK-TL-N","Web Literature 3":"800344CA-V2","Units":"Inch","Substrate":"Carbide","Cutting Type":"Center Cutting","Shank Tolerance":"h6","Surface Treatment":"DLC","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Weldon Flat":"No","Mill Type":"Single End","End Cut Type":"Square End","Length of Cut - Specification":["REGULAR","LONG"],"Cutting Direction":"RH","Helix Direction":"RH","View Catalog Page":"Here","View Speed and Feed Page":"Here","Web Literature 2":"800339CA-V7","Benefit 1":"R ramping and plunging process helps to shorten cycle time by improving the tool path","Benefit 2":"Balanced flute design that has high rigidity and large chip pocket make more stable and higher productivity","Benefit 3":"High welding resistance and lubricity makes better surface finish of work piece in non-ferrous machining","Benefit 4":"Breaks chips into manageable shapes","Feature 1":"Center cutting","Feature 2":"New flute form","Feature 3":"DLC coating","Feature 4":"Nicked edge","Full Description":"The OSG A Brand AE-NIK-TL-N is a DLC coated carbide end mill with a unique chip breaker (NIK) designed for advanced performance in non-ferrous materials","Product Overview":"3 Flute, Long Length Nicked, for All Non-Ferrous Materials","Short Description":"Advanced Performance DLC Coated Carbide End Mills for Non-Ferrous Materials","Diameter-Sizes":"3/8\" - 1\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"3\" - 6\"","Shank-Sizes":"0.375\" - 1\"","Friendly Name":"8631","CategoryBrand":"A Brand"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%208635/End_Mills_-_End_Mill_-_A_Brand_AE-TS-N_-_List_8635"],"Number of Flutes":"3","Diameter - Inch (D)":["0.125","0.1875","0.25","0.3125","0.375","0.5","0.625","0.75","1"],"Diameter - Fractional Size (D)":["1/8","3/16","1/4"],"Shank Diameter - Inch (d)":["0.125","0.1875","0.25","0.3125","0.375","0.5","0.625","0.75","1"],"L/D Ratio":"1","Length of Cut - Inch (Lc)":["0.1875","0.28125","0.375","0.46875","0.5625","0.75","0.9375","1.125","1.5"],"Overall Length - Inch (L)":["1.5","2","2.5","3","4","5","6"],"Helix Angle - Degree":"41","List Name":"AE-TS-N","Units":"Inch","Substrate":"Carbide","Cutting Type":"Center Cutting","Shank Tolerance":"h6","Surface Treatment":"DLC","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Weldon Flat":"No","Mill Type":"Single End","End Cut Type":"Square End","Length of Cut - Specification":"STUB","Cutting Direction":"RH","Helix Direction":"RH","View Catalog Page":"Here","View Speed and Feed Page":"Here","Web Literature 2":"800339CA-V7","Web Literature 3":"800344CA-V2","Benefit 1":"Ideal for Plunging","Benefit 2":"High Rigidity and Excellent Chip Evacuation","Benefit 3":"Achieves Both Rigidity and Sharpness","Benefit 4":"For Superior Surface Accuracy","Feature 1":"Center Cutting Edge","Feature 2":"Large Core & New Flute Form","Feature 3":"Unique Cutting Edge","Feature 4":"DLC Super Hard Coating","Full Description":"The OSG A Brand AE-TS-N is a DLC coated carbide end mill designed for advanced performance in non-ferrous materials","Product Overview":"3 Flutes, Regular Length, Reduced Neck","Short Description":"Advanced Performance DLC Coated Carbide End Mills for Non-Ferrous Materials","Diameter-Sizes":"1/8\" - 1\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"1.5\" - 6\"","Shank-Sizes":"0.125\" - 1\"","Friendly Name":"8635","CategoryBrand":"A Brand"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%208730/End_Mills_-_End_Mill_-_A_Brand_AE-TL-N-5D_-_List_8730"],"Diameter - Metric (D)":["3","4","5","6","8","10","12"],"Number of Flutes":"3","Length of Cut - Metric (Lc)":["9","12","15","18","24","30","36","20","25","40","50","60"],"Overall Length - Metric (L)":["55","60","70","75","80","65","90","100","110"],"Cutting Diameter Tolerance - Metric":"+0 / -0.020","Shank Diameter - Metric (d)":["6","8","10","12"],"Type":["1","2"],"Helix Angle - Degree":"41","Benefit 2":"High Rigidity and Excellent chip evacuation","Web Literature 4":"800388CA","Benefit 3":"Achieves both rigidity and sharpness","Full Description":"Advanced Performance DLC Coated End Mills for Non-Ferrous Materials","Short Description":"Advanced Performance DLC Coated End Mills for Non-Ferrous Materials","List Name":"AE-TL-N","Benefit 4":"For superior surface accuracy","Web Video 1":"https://youtu.be/iowfXxrjRfg","Web Video 2":"https://youtu.be/NftHWs85xyM","Web Literature 1":"8002024CA-EM,58|8002024CA-EMT,19","Benefit 1":"Ideal for Plunging","Web Literature 2":"800339CA-V5","Web Literature 3":"800379CA|80067CA","Substrate":"Carbide","Product Overview":"Carbide, DLC Coated, 3-Flutes, Long Length, Metric Sizes","Cutting Type":"Center Cutting","Feature 2":"Large Core & New Flute Form","Feature 1":"Center Cutting Edge","Surface Treatment":"DLC","Feature 4":"DLC Super Hard Coating","View Speed and Feed Page":"Here","View Catalog Page":"Here","Coolant Thru":"No","Units":"Metric","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Weldon Flat":"No","Shank Tolerance":"Shrink Fit","Mill Type":"Single End","End Cut Type":"Square End","Length of Cut - Specification":["REGULAR","LONG"],"Cutting Direction":"RH","Helix Direction":"RH","Feature 3":"Unique Cutting Edge","Diameter-Sizes":"3mm - 12mm","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"55mm - 110mm","Shank-Sizes":"6mm - 12mm","Friendly Name":"8730","CategoryBrand":"A Brand"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%208735/End_Mills_-_End_Mill_-_A_Brand_AE-TS-N_-_List_8735"],"Number of Flutes":"3","Neck Diameter - Metric (d1)":["0.95","1.45","1.9","2.4","2.85","3.8","4.8","5.8","7.7","9.7","11.7","15.7","19.7","24.7"],"Overall Length - Metric (L)":["45","55","60","70","75","80","110","120","140"],"Shank Diameter - Metric (d)":["4","6","8","10","12","16","20","25"],"L/D Ratio":"1.5","Neck Length - Metric (L1)":["8.6","9.3","10.1","10.6","14.8","15.9","16.8"],"Non-Taper Neck Length - Metric (L2)":["3","4.5","6","7.5","9","12","15","18","24","30","36","48","60","75"],"Diameter - Metric (D)":["1","1.5","2","2.5","3","4","5","6","8","10","12","16","20","25"],"Length of Cut - Metric (Lc)":["1.5","2.3","3","3.8","4.5","6","7.5","9","12","15","18","24","30","37.5"],"Helix Angle - Degree":"41","Diameter - Fractional Size (D)":"-","List Name":"AE-TS-N","Substrate":"Carbide","Cutting Type":"Center Cutting","Shank Tolerance":"h6","Surface Treatment":"DLC","Coolant Thru":"No","Units":"Metric","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Weldon Flat":"No","Mill Type":"Single End","End Cut Type":"Square End","Cutting Direction":"RH","Length of Cut - Specification":"STUB","Helix Direction":"RH","View Catalog Page":"Here","View Speed and Feed Page":"Here","Web Literature 2":"800339CA-V7","Web Literature 3":"800344CA-V2","Benefit 1":"Ideal for Plunging","Benefit 2":"High Rigidity and Excellent Chip Evacuation","Benefit 3":"Achieves Both Rigidity and Sharpness","Benefit 4":"For Superior Surface Accuracy","Feature 1":"Center Cutting Edge","Feature 2":"Large Core & New Flute Form","Feature 3":"Unique Cutting Edge","Feature 4":"DLC Super Hard Coating","Full Description":"The OSG A Brand AE-TS-N is a DLC coated carbide end mill designed for advanced performance in non-ferrous materials","Product Overview":"3 Flutes, Regular Length, Reduced Neck","Short Description":"Advanced Performance DLC Coated Carbide End Mills for Non-Ferrous Materials","Alloy Steels : 4140; 4340":"-","Aramid Fiber (AFRP)":"-","Bottom Edge Radius - Metric (R2)":"-","Brass, Bronze":"N; Best","Carbon Fiber (CFRP)":"-","Carbon Fiber / Al / Ti / CRES Stack":"-","Carbon Fiber / Aluminum Stack":"-","Carbon Fiber / Titanium Stack":"-","Carbon/Carbon":"-","Cast Iron":"-","Coating Thickness (µm)":"-","Cobalt-Chrome":"-","Compatible Machine":"-","Compression Length - Inch (L2)":"-","Contour Milling":"-","Corner Chamfer - Inch (C)":"-","Corner Chamfer - Metric (C)":"-","Corner Radius - Inch (R)":"-","Corner Radius - Metric (R)":"-","Cut Incline Angle - Degree (α)":"-","Cut Incline Angle Tolerance - Degree":"-","Cutting Diameter Tolerance - Inch":"-","Cutting Diameter Tolerance - Metric":"-","Deep Side Milling":"-","Diameter - Inch (D)":"-","Diameter at Center of Radius - Metric (dm)":"-","Die Steels":"-","Edge Radius - Metric (R3)":"-","Effective Diameter - Inch (DCF)":"-","Effective Diameter - Metric (DCF)":"-","Effective Draft Angle - Degree (α)":"-","Effective Neck Length by Incline Angle 0.5° - Inch":"-","Effective Neck Length by Incline Angle 0.5° - Metric":"-","Effective Neck Length by Incline Angle 0° - Inch":"-","Effective Neck Length by Incline Angle 0° - Metric":"-","Effective Neck Length by Incline Angle 1.5° - Inch":"-","Effective Neck Length by Incline Angle 1.5° - Metric":"-","Effective Neck Length by Incline Angle 1° - Inch":"-","Effective Neck Length by Incline Angle 1° - Metric":"-","Effective Neck Length by Incline Angle 2.5° - Metric":"-","Effective Neck Length by Incline Angle 2° - Inch":"-","Effective Neck Length by Incline Angle 2° - Metric":"-","Effective Neck Length by Incline Angle 3° - Inch":"-","Effective Neck Length by Incline Angle 3° - Metric":"-","Effective Radius - Metric (rt)":"-","Form Tolerance - Metric":"-","Glass Ceramics":"-","Glass Fiber (GFRP)":"-","Graphite":"-","Hardened Steels : 35 HRC":"-","Hardened Steels : 35-45 HRC":"-","Hardened Steels : 45-50 HRC":"-","Hardened Steels : 50-70 HRC":"-","Helical Milling":"-","High Carbon Steel : 1065":"-","Honeycomb: AFRP":"-","Honeycomb: AI/AI":"-","Honeycomb: CFRP/AI":"-","Honeycomb: CFRP/Nomex":"-","Honeycomb: GFRP/Nomex":"-","Hybrid Ceramic / Composite":"-","Included Angle - Degree (α)":"-","Interference Angle - Degree (α)":"-","Length of Cut - Inch (Lc)":"-","Length to Center of Radius - Metric (Lm)":"-","Low Carbon Steel : 1010; 1018":"-","Magnesium":"-","Medium Carbon Steel : 1035; 1045":"-","Neck Diameter - Inch (d1)":"-","Neck Diameter Max - Inch (d1 Max)":"-","Neck Diameter Max - Metric (d1 Max)":"-","Neck Diameter Min - Inch (d1 Min)":"-","Neck Diameter Min - Metric (d1 Min)":"-","Neck Draft Angle - Degree (ß)":"-","Neck Length - Inch (L1)":"-","Neck Taper Angle - Degree (α)":"-","Nickel Alloy : Inconel":"-","Non-Taper Neck Length - Inch (L2)":"-","Notes":"-","Overall Length - Inch (L)":"-","PEEK":"-","Peripheral Edge Radius - Metric (R2)":"-","Plunging":"-","Radius Tolerance - Inch":"-","Radius Tolerance - Metric":"-","Ramping":"-","Shank Diameter - Inch (d)":"-","Side Milling":"-","Slotting":"-","Stainless Steels : 17-4PH":"-","Stainless Steels : 300":"-","Stainless Steels : 400":"-","Taper Angle Tolerance - Degree":"-","Taper Diameter - Metric (Ds)":"-","Taper per Side - Degree (α)":"-","Tilt Angle - Degree (α/2)":"-","Tip Radius - Metric (R1)":"-","Titanium":"-","Titanium : 6AL4V (30HRC)":"-","Trochoidal Milling":"-","Type":"1","Type (feature)":"-","Wax/PMMA":"-","Web Literature 1":"-","Web Literature 4":"-","Web Video 1":"-","Web Video 2":"-","Web Video 3":"-","Zirconia":"-","Diameter-Sizes":"1mm - 25mm","Flute-Sizes":"-","Neck-Sizes":"8.6mm - 16.8mm","Taper-Sizes":"-","Overall-Sizes":"45mm - 140mm","Shank-Sizes":"4mm - 25mm","Friendly Name":"8735","CategoryBrand":"A Brand"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%208830/End_Mills_-_End_Mill_-_A_Brand_AE-N_-_List_8830_-_AE-VTS-N"],"Number of Flutes":"3","Neck Diameter - Inch (d1)":["0.12","0.181","0.242","0.305","0.367","0.488"],"Neck Length - Inch (L1)":["0.375","0.5625","0.75","0.9375","1.125","1.5"],"Diameter - Inch (D)":["0.125","0.1875","0.25","0.3125","0.375","0.5"],"Diameter - Fractional Size (D)":["1/8","3/16","1/4","5/16","3/8","1/2"],"Shank Diameter - Inch (d)":["0.125","0.1875","0.25","0.3125","0.375","0.5"],"Feature 4":"3 cutting edges at center","Length of Cut - Inch (Lc)":["0.25","0.375","0.5","0.75","0.875","1.125"],"Overall Length - Inch (L)":["2.25","2.5","3","3.25"],"Helix Angle - Degree":"40-43","Benefit 2":"High rigidity prevents chattering","Web Literature 4":"800388CA","Benefit 1":"Achieves higher precision machined surface quality","Web Video 1":"https://youtu.be/0-xghjDmts0","Full Description":"Advanced Performance DLC Coated End Mills for Non-Ferrous Materials","Short Description":"Advanced Performance DLC Coated End Mills for Non-Ferrous Materials","Feature 1":"Flat cutting edge","Benefit 4":"For high speed milling","List Name":"AE-VTS-N","Web Literature 1":"8002024CA-EM,55|8002024CA-EMT,17","Benefit 3":"Can be used for plunging","Web Literature 2":"800339CA-V5","Web Literature 3":"800378CA","Units":"Inch","Substrate":"Carbide","Product Overview":"Carbide, DLC+IGUSS Coated, 3-Flutes, Regular Length, Reduced Neck  ","Feature 2":"Large core design","Cutting Type":"Center Cutting","Feature 3":"Center Cutting Edge","Surface Treatment":"DLC-IGUSS","View Speed and Feed Page":"Here","View Catalog Page":"Here","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Weldon Flat":"No","Shank Tolerance":"Shrink Fit","Mill Type":"Single End","Type (feature)":"Reduced Neck","End Cut Type":"Square End","Length of Cut - Specification":"REGULAR","Cutting Direction":"RH","Cutting Diameter Tolerance - Inch":"+0 / -0.0008","Helix Direction":"RH","Diameter-Sizes":"1/8\" - 0.5\"","Flute-Sizes":"-","Neck-Sizes":"0.375\" - 1.5\"","Taper-Sizes":"-","Overall-Sizes":"2.25\" - 3.25\"","Shank-Sizes":"0.125\" - 0.5\"","Friendly Name":"8830","CategoryBrand":"A Brand"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%208930/End_Mills_-_End_Mill_-_A_Brand_AE-N_-_List_8930_-_AE-VTS-N","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%208930/OSG_-_Website_-_New_Products_-_AE-VTS-N"],"Number of Flutes":"3","Neck Diameter - Metric (d1)":["0.95","1.45","1.95","2.4","2.85","3.8","4.8","5.8","7.7","9.7","11.7"],"Overall Length - Metric (L)":["45","55","60","70","75","80"],"Shank Diameter - Metric (d)":["4","6","8","10","12"],"Cutting Diameter Tolerance - Metric":"+0 / -0.020","Type":["1","2"],"Neck Length - Metric (L1)":["3","4.5","6","7.5","9","12","15","18","24","30","36"],"Feature 4":"3 cutting edges at center","Diameter - Metric (D)":["1","1.5","2","2.5","3","4","5","6","8","10","12"],"Length of Cut - Metric (Lc)":["1.5","2.3","3","3.8","4.5","6","7.5","9","12","15","18"],"Helix Angle - Degree":"40-43","Benefit 2":"High rigidity prevents chattering","Web Literature 4":"800388CA","Benefit 1":"Achieves higher precision machined surface quality","Web Video 1":"https://youtu.be/0-xghjDmts0","Full Description":"Advanced Performance DLC Coated End Mills for Non-Ferrous Materials","Short Description":"Advanced Performance DLC Coated End Mills for Non-Ferrous Materials","Feature 1":"Flat cutting edge","Benefit 4":"For high speed milling","List Name":"AE-VTS-N","Web Literature 1":"8002024CA-EM,56|8002024CA-EMT,17","Benefit 3":"Can be used for plunging","Web Literature 2":"800339CA-V5","Web Literature 3":"800378CA","Substrate":"Carbide","Product Overview":"Carbide, DLC+IGUSS Coated, 3-Flutes, Regular Length, Reduced Neck  ","Cutting Type":"Center Cutting","Feature 2":"Large core design","Feature 3":"Center Cutting Edge","Surface Treatment":"DLC-IGUSS","View Speed and Feed Page":"Here","View Catalog Page":"Here","Coolant Thru":"No","Units":"Metric","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Weldon Flat":"No","Shank Tolerance":"Shrink Fit","Mill Type":"Single End","Type (feature)":"Reduced Neck","End Cut Type":"Square End","Cutting Direction":"RH","Length of Cut - Specification":"STUB","Helix Direction":"RH","Diameter-Sizes":"1mm - 12mm","Flute-Sizes":"-","Neck-Sizes":"3mm - 36mm","Taper-Sizes":"-","Overall-Sizes":"45mm - 80mm","Shank-Sizes":"4mm - 12mm","Friendly Name":"8930","CategoryBrand":"A Brand"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%209140/End_Mills_-_End_Mill_-_EXOCARB_MAX_-_List_9140"],"Diameter - Metric (D)":["3","4","5","6","8","10","12"],"Length of Cut - Metric (Lc)":["8","11","13","19","22","26"],"Number of Flutes":"6","Overall Length - Metric (L)":["45","50","60","70","75"],"Cutting Diameter Tolerance - Metric":"+0 / -0.020","Shank Diameter - Metric (d)":["6","8","10","12"],"Stainless Steels : 17-4PH":"M; Good","Helix Angle - Degree":"45","Web Literature 4":"800388CA","Stainless Steels : 300":"M; Good","Product Overview":"6-flute, Square, WXS Coating","Hardened Steels : 35 HRC":"H; Best","Web Literature 1":"8002024CA-EM,73|8002024CA-EMT,39","Hardened Steels : 35-45 HRC":"H; Best","Alloy Steels : 4140; 4340":"P; Best","Hardened Steels : 45-50 HRC":"H; Best","Hardened Steels : 50-70 HRC":"H; Best","Substrate":"Carbide","Die Steels":"P; Best","Cast Iron":"K; Best","High Carbon Steel : 1065":"P; Best","Cutting Type":"Center Cutting","Low Carbon Steel : 1010; 1018":"P; Best","Medium Carbon Steel : 1035; 1045":"P; Best","Shank Tolerance":"h6","View Speed and Feed Page":"Here","View Catalog Page":"Here","Coolant Thru":"No","Stainless Steels : 400":"M; Good","List Name":"MAX HARD-EMS","Full Description":"Maximum Performance Carbide End Mills for Hardened Steels over 55Rc","Short Description":"Maximum Performance Carbide End Mills for Hardened Steels over 55Rc","Units":"Metric","Weldon Flat":"No","Surface Treatment":"WXS","Mill Type":"Single End","End Cut Type":"Square End","Length of Cut - Specification":"REGULAR","Cutting Direction":"RH","Helix Direction":"RH","Nickel Alloy : Inconel":"S; Good","Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"3mm - 12mm","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"45mm - 75mm","Shank-Sizes":"6mm - 12mm","Friendly Name":"9140","CategoryBrand":"EXOCARB"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20HP400/End_Mills_-_End_Mill_-_HY-PRO_CARB_-_List_HP400_-_Square_End_-_Catalog"],"Number of Flutes":"4","Overall Length - Inch (L)":["4","2.5","3","3.5"],"Shank Diameter - Inch (d)":["1","0.25","0.3125","0.375","0.5","0.625","0.75"],"Diameter - Fractional Size (D)":["1","1/4","5/16","3/8","1/2","5/8","3/4"],"Diameter - Inch (D)":["1","0.25","0.3125","0.375","0.5","0.625","0.75"],"Length of Cut - Inch (Lc)":["1.75","0.75","1","1.25","1.625"],"Helix Angle - Degree":"30","Stainless Steels : 17-4PH":"M; Good","Product Overview":"4 Flute, Roughing, TiAlN","Web Literature 4":"800388CA","Stainless Steels : 300":"M; Good","Web Literature 1":"8002024CA-EM,121|8002024CA-EMT,66","Units":["Inch","Metric"],"Substrate":"Carbide","Hardened Steels : 35 HRC":"H; Good","Hardened Steels : 35-45 HRC":"H; Good","Cast Iron":"K; Good","Cutting Type":"Center Cutting","Hardened Steels : 45-50 HRC":"H; Good","Shank Tolerance":"h6","Alloy Steels : 4140; 4340":"P; Good","Die Steels":"P; Good","High Carbon Steel : 1065":"P; Good","Low Carbon Steel : 1010; 1018":"P; Good","View Speed and Feed Page":"Here","View Catalog Page":"Here","Coolant Thru":"No","Stainless Steels : 400":"M; Good","Weldon Flat":"No","Medium Carbon Steel : 1035; 1045":"P; Good","Full Description":"Performance Carbide TiAlN End Mills for Ferrous and Non-Ferrous Materials","Short Description":"Performance Carbide TiAlN End Mills for Ferrous and Non-Ferrous Materials","Mill Type":"Single End","End Cut Type":"Square End","Length of Cut - Specification":["STUB","LONG","REGULAR"],"Cutting Direction":"RH","Surface Treatment":"TiAlN","Cutting Diameter Tolerance - Inch":"+0 / -0.0015","Helix Direction":"RH","List Name":"ROUGHER","Type (feature)":"Roughing","Nickel Alloy : Inconel":"S; Good","Titanium : 6AL4V (30HRC)":"S; Good","Diameter - Metric (D)":["3","4","5","6","8","10","12","16","20","25"],"Overall Length - Metric (L)":["64","70","76","89","102"],"Cutting Diameter Tolerance - Metric":"+0 / -0.038","Shank Diameter - Metric (d)":["6","8","10","12","16","20","25"],"Length of Cut - Metric (Lc)":["10","14","15","19","21","25","32","38"],"Diameter-Sizes":"3mm - 1\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"2.5\" - 102mm","Shank-Sizes":"6mm - 1\"","Friendly Name":"HP400","CategoryBrand":"HY-PRO CARB"}

{"Number of Flutes":"2","Neck Diameter - Metric (d1)":["0.45","0.55","0.75","0.95","1.15","1.35","1.45","1.55","1.75","1.95","2.4"],"Overall Length - Metric (L)":["60"],"Cutting Diameter Tolerance - Metric":"+0 / -0.038","Shank Diameter - Metric (d)":["6"],"Neck Length - Metric (L1)":["2.5","3","4","5","6","7","7.5","8","9","10","12.5"],"Product Overview":"2 Flute, Short Length,Long Neck, TiAlN","Diameter - Metric (D)":["0.5","0.6","0.8","1","1.2","1.4","1.5","1.6","1.8","2","2.5"],"Helix Angle - Degree":"30","Length of Cut - Metric (Lc)":["0.7","0.9","1.2","1.5","1.8","2.1","2.3","2.4","2.7","3","3.7"],"Substrate":["Carbide"],"Hardened Steels : 35 HRC":"H; Good","Hardened Steels : 35-45 HRC":"H; Good","Cast Iron":"K; Good","Cutting Type":"Center Cutting","List Name":"LN-SQ","Hardened Steels : 45-50 HRC":"H; Good","Type (feature)":"Long Neck","Shank Tolerance":"h6","Alloy Steels : 4140; 4340":"P; Good","Die Steels":"P; Good","High Carbon Steel : 1065":"P; Good","Low Carbon Steel : 1010; 1018":"P; Good","Coolant Thru":"No","Units":["Metric","Inch"],"Weldon Flat":"No","Medium Carbon Steel : 1035; 1045":"P; Good","Full Description":"Performance Carbide TiAlN End Mills for Ferrous and Non-Ferrous Materials","Short Description":"Performance Carbide TiAlN End Mills for Ferrous and Non-Ferrous Materials","Mill Type":"Single End","End Cut Type":"Square End","Length of Cut - Specification":"STUB","Cutting Direction":"RH","Surface Treatment":"TiAlN","Helix Direction":"RH","Neck Diameter - Inch (d1)":["0.029","0.06","0.091","0.183"],"Neck Length - Inch (L1)":["0.3125","0.625","0.9375","1.875"],"Diameter - Inch (D)":["0.03125","0.0625","0.09375","0.1875"],"Diameter - Fractional Size (D)":["1/32","1/16","3/32","3/16"],"Length of Cut - Inch (Lc)":["0.046875","0.09375","0.140625","0.28125"],"Shank Diameter - Inch (d)":["0.25"],"Overall Length - Inch (L)":["2.5","4"],"Cutting Diameter Tolerance - Inch":"+0 / -0.0015","CategoryBrand":"HY-PRO CARB","Diameter-Sizes":"0.5mm - 0.1875\"","Flute-Sizes":"-","Neck-Sizes":"2.5mm - 1.875\"","Taper-Sizes":"-","Overall-Sizes":"60mm - 4\"","Shank-Sizes":"6mm - 0.25\"","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20HP410/End_Mills_-_End_Mill_-_HY-PRO_CARB_-_List_HP410_-_Square_End_-_Catalog"],"Friendly Name":"HP410"}

{"Diameter - Metric (D)":["3","3.5","4","5","6"],"Length of Cut - Metric (Lc)":["4.5","5.3","6","7.5","9"],"Number of Flutes":"4","Neck Diameter - Metric (d1)":["2.85","3.35","3.85","4.85","5.85"],"Overall Length - Metric (L)":["70","80","90"],"Cutting Diameter Tolerance - Metric":"+0 / -0.038","Shank Diameter - Metric (d)":["6"],"Neck Length - Metric (L1)":["15","17.5","20","25","30"],"Helix Angle - Degree":"30","Product Overview":"4 Flute, Short Length, Long Neck, TiAlN","Substrate":["Carbide"],"Hardened Steels : 35 HRC":"H; Good","Hardened Steels : 35-45 HRC":"H; Good","Cast Iron":"K; Good","Cutting Type":"Center Cutting","List Name":"LN-SQ","Type (feature)":"Long Neck","Shank Tolerance":"h6","Alloy Steels : 4140; 4340":"P; Good","Die Steels":"P; Good","High Carbon Steel : 1065":"P; Good","Low Carbon Steel : 1010; 1018":"P; Good","Coolant Thru":"No","Units":["Metric","Inch"],"Weldon Flat":"No","Medium Carbon Steel : 1035; 1045":"P; Good","Full Description":"Performance Carbide TiAlN End Mills for Ferrous and Non-Ferrous Materials","Short Description":"Performance Carbide TiAlN End Mills for Ferrous and Non-Ferrous Materials","Mill Type":"Single End","End Cut Type":"Square End","Length of Cut - Specification":"STUB","Cutting Direction":"RH","Surface Treatment":"TiAlN","Helix Direction":"RH","Overall Length - Inch (L)":["3","4"],"Neck Diameter - Inch (d1)":["0.119","0.182","0.244"],"Neck Length - Inch (L1)":["0.625","0.9375","1.25"],"Diameter - Inch (D)":["0.125","0.1875","0.25"],"Diameter - Fractional Size (D)":["1/8","3/16","1/4"],"Length of Cut - Inch (Lc)":["0.1875","0.28125","0.375"],"Shank Diameter - Inch (d)":["0.25"],"Cutting Diameter Tolerance - Inch":"+0 / -0.0015","CategoryBrand":"HY-PRO CARB","Diameter-Sizes":"3mm - 0.25\"","Flute-Sizes":"-","Neck-Sizes":"15mm - 1.25\"","Taper-Sizes":"-","Overall-Sizes":"70mm - 4\"","Shank-Sizes":"6mm - 0.25\"","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20HP411/End_Mills_-_End_Mill_-_HY-PRO_CARB_-_List_HP411_-_Square_End_-_Catalog"],"Friendly Name":"HP411"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20HP421/End_Mills_-_End_Mill_-_HY-PRO_CARB_-_List_HP421_-_Square_End_-_Catalog"],"Length of Cut - Metric (Lc)":["3","5","7","8","10","12","14","16","19","21","22","25","30","32","35","38"],"Number of Flutes":"2","Overall Length - Metric (L)":["39","51","64","70","76","89","102"],"Shank Diameter - Metric (d)":["3","4","5","6","8","10","11","12","14","16","18","20","22","25"],"Cutting Diameter Tolerance - Metric":"+0 / -0.038","Product Overview":"2 Flute,TiAlN","Diameter - Metric (D)":["1","1.5","2","2.5","3","3.5","4","4.5","5","6","7","8","9","10","11","12","14","16","18","20","22","25"],"Helix Angle - Degree":"35","Stainless Steels : 17-4PH":"M; Good","Web Literature 4":"800388CA","Stainless Steels : 300":"M; Good","Web Literature 1":"8002024CA-EM,118|8002024CA-EMT,59","Substrate":"Carbide","Hardened Steels : 35 HRC":"H; Good","Hardened Steels : 35-45 HRC":"H; Good","Cast Iron":"K; Good","Cutting Type":"Center Cutting","Hardened Steels : 45-50 HRC":"H; Good","Shank Tolerance":"h6","Alloy Steels : 4140; 4340":"P; Good","Die Steels":"P; Good","High Carbon Steel : 1065":"P; Good","Low Carbon Steel : 1010; 1018":"P; Good","View Speed and Feed Page":"Here","View Catalog Page":"Here","Coolant Thru":"No","Stainless Steels : 400":"M; Good","Units":["Metric","Inch"],"Weldon Flat":"No","Medium Carbon Steel : 1035; 1045":"P; Good","Full Description":"Performance Carbide TiAlN End Mills for Ferrous and Non-Ferrous Materials","Short Description":"Performance Carbide TiAlN End Mills for Ferrous and Non-Ferrous Materials","Mill Type":"Single End","List Name":"SQ","End Cut Type":"Square End","Length of Cut - Specification":["REGULAR","LONG","STUB"],"Cutting Direction":"RH","Surface Treatment":"TiAlN","Helix Direction":"RH","Nickel Alloy : Inconel":"S; Good","Titanium : 6AL4V (30HRC)":"S; Good","Diameter - Inch (D)":["0.046875","0.0625","0.078125","0.09375","1","0.109375","0.125","0.140625","0.15625","0.171875","0.1875","0.203125","0.21875","0.25","0.28125","0.3125","0.34375","0.375","0.40625","0.4375","0.5","0.5625","0.625","0.6875","0.75","0.875"],"Shank Diameter - Inch (d)":["0.125","1","0.1875","0.25","0.3125","0.375","0.4375","0.5","0.5625","0.625","0.75","0.875"],"Length of Cut - Inch (Lc)":["0.140625","0.1875","0.25","0.3125","1.5","0.375","0.5","0.5625","0.625","0.75","0.8125","0.875","1","1.125","1.25","1.375"],"Overall Length - Inch (L)":["1.5","4","2","2.5","2.75","3","3.5"],"Diameter - Fractional Size (D)":["3/64","1/16","5/64","3/32","1","7/64","1/8","9/64","5/32","11/64","3/16","13/64","7/32","1/4","9/32","5/16","11/32","3/8","13/32","7/16","1/2","9/16","5/8","11/16","3/4","7/8"],"Cutting Diameter Tolerance - Inch":"+0 / -0.0015","Diameter-Sizes":"1mm - 1\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"1.5\" - 102mm","Shank-Sizes":"3mm - 1\"","Friendly Name":"HP421","CategoryBrand":"HY-PRO CARB"}

{"Length of Cut - Metric (Lc)":["3","5","7","8","10","12","14","16","19","21","22","25","30","32","35","38"],"Number of Flutes":"4","Overall Length - Metric (L)":["39","51","64","70","76","89","102"],"Shank Diameter - Metric (d)":["3","4","5","6","8","10","11","12","14","16","18","20","22","25"],"Cutting Diameter Tolerance - Metric":"+0 / -0.038","Diameter - Metric (D)":["1","1.5","2","2.5","3","3.5","4","4.5","5","6","7","8","9","10","11","12","14","16","18","20","22","25"],"Helix Angle - Degree":"35","Product Overview":"4 Flute, TiAlN","Stainless Steels : 17-4PH":"M; Good","Web Literature 4":"800388CA","Stainless Steels : 300":"M; Good","Web Literature 1":"8002024CA-EM,119|8002024CA-EMT,60","Substrate":["Carbide"],"Hardened Steels : 35 HRC":"H; Good","Hardened Steels : 35-45 HRC":"H; Good","Cast Iron":"K; Good","Cutting Type":"Center Cutting","Hardened Steels : 45-50 HRC":"H; Good","Shank Tolerance":"h6","Alloy Steels : 4140; 4340":"P; Good","Die Steels":"P; Good","High Carbon Steel : 1065":"P; Good","Low Carbon Steel : 1010; 1018":"P; Good","View Speed and Feed Page":"Here","View Catalog Page":"Here","Coolant Thru":"No","Stainless Steels : 400":"M; Good","Units":["Metric","Inch"],"Weldon Flat":"No","Medium Carbon Steel : 1035; 1045":"P; Good","Full Description":"Performance Carbide TiAlN End Mills for Ferrous and Non-Ferrous Materials","Short Description":"Performance Carbide TiAlN End Mills for Ferrous and Non-Ferrous Materials","Mill Type":"Single End","List Name":"SQ","End Cut Type":"Square End","Length of Cut - Specification":["REGULAR","LONG","STUB"],"Cutting Direction":"RH","Surface Treatment":"TiAlN","Helix Direction":"RH","Nickel Alloy : Inconel":"S; Good","Titanium : 6AL4V (30HRC)":"S; Good","Diameter - Inch (D)":["0.046875","0.0625","0.078125","0.09375","1","0.109375","0.125","0.140625","0.15625","0.171875","0.1875","0.203125","0.21875","0.25","0.28125","0.3125","0.34375","0.375","0.40625","0.4375","0.5","0.5625","0.625","0.6875","0.75","0.875"],"Shank Diameter - Inch (d)":["0.125","1","0.1875","0.25","0.3125","0.375","0.4375","0.5","0.5625","0.625","0.75","0.875"],"Length of Cut - Inch (Lc)":["0.140625","0.1875","0.25","0.3125","1.5","0.375","0.5","0.5625","0.625","0.75","0.8125","0.875","1","1.125","1.25","1.375"],"Overall Length - Inch (L)":["1.5","4","2","2.5","2.75","3","3.5"],"Diameter - Fractional Size (D)":["3/64","1/16","5/64","3/32","1","7/64","1/8","9/64","5/32","11/64","3/16","13/64","7/32","1/4","9/32","5/16","11/32","3/8","13/32","7/16","1/2","9/16","5/8","11/16","3/4","7/8"],"Cutting Diameter Tolerance - Inch":"+0 / -0.0015","CategoryBrand":"HY-PRO CARB","Diameter-Sizes":"1mm - 1\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"1.5\" - 102mm","Shank-Sizes":"3mm - 1\"","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20HP441/End_Mills_-_End_Mill_-_HY-PRO_CARB_-_List_HP441_-_Square_End"],"Friendly Name":"HP441"}

{"Overall Length - Inch (L)":["4","1.5","2","2.5","2.75","3","3.5"],"Number of Flutes":["8","4","6"],"Shank Diameter - Inch (d)":["1","0.125","0.1875","0.25","0.3125","0.4375","0.5","0.5625","0.625","0.875"],"Diameter - Fractional Size (D)":["1","1/8","3/16","1/4","5/16","7/16","1/2","9/16","5/8","7/8"],"Diameter - Inch (D)":["1","0.125","0.1875","0.25","0.3125","0.4375","0.5","0.5625","0.625","0.875"],"Length of Cut - Inch (Lc)":["1.5","0.5","0.625","0.75","0.8125","1","1.125","1.25"],"Stainless Steels : 17-4PH":"M; Good","Helix Angle - Degree":"50","Stainless Steels : 300":"M; Good","Units":["Inch","Metric"],"Substrate":"Carbide","Hardened Steels : 35 HRC":"H; Good","Hardened Steels : 35-45 HRC":"H; Good","Cast Iron":"K; Good","Cutting Type":"Center Cutting","Hardened Steels : 45-50 HRC":"H; Good","Shank Tolerance":"h6","Alloy Steels : 4140; 4340":"P; Good","Die Steels":"P; Good","High Carbon Steel : 1065":"P; Good","Low Carbon Steel : 1010; 1018":"P; Good","Coolant Thru":"No","Stainless Steels : 400":"M; Good","Product Overview":"Multiple Flute, TiAlN","Weldon Flat":"No","Medium Carbon Steel : 1035; 1045":"P; Good","Full Description":"Performance Carbide TiAlN End Mills for Ferrous and Non-Ferrous Materials","Short Description":"Performance Carbide TiAlN End Mills for Ferrous and Non-Ferrous Materials","Mill Type":"Single End","List Name":"SQ","End Cut Type":"Square End","Length of Cut - Specification":["STUB","LONG","REGULAR"],"Cutting Direction":"RH","Surface Treatment":"TiAlN","Cutting Diameter Tolerance - Inch":"+0 / -0.0015","Helix Direction":"RH","Nickel Alloy : Inconel":"S; Good","Titanium : 6AL4V (30HRC)":"S; Good","Diameter - Metric (D)":["3","4","5","6","8","10","12","14","16","18","20","22","25"],"Overall Length - Metric (L)":["51","64","76","89","102"],"Cutting Diameter Tolerance - Metric":"+0 / -0.038","Shank Diameter - Metric (d)":["6","8","10","12","14","16","18","20","22","25"],"Length of Cut - Metric (Lc)":["10","14","16","19","21","25","30","35","38"],"CategoryBrand":"HY-PRO CARB","Diameter-Sizes":"3mm - 1\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"1.5\" - 102mm","Shank-Sizes":"0.125\" - 1\"","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20HP450/End_Mills_-_End_Mill_-_HY-PRO_CARB_-_List_HP450_-_Square_End_-_Catalog"],"Friendly Name":"HP450"}

{"Number of Flutes":"4","Diameter - Inch (D)":["0.125","0.1875","0.25","0.3125","0.375","0.5","0.625","0.75"],"Diameter - Fractional Size (D)":["1/8","3/16","1/4","5/16","3/8","1/2","5/8","3/4"],"Shank Diameter - Inch (d)":["0.125","0.1875","0.25","0.3125","0.375","0.5","0.625","0.75"],"Length of Cut - Inch (Lc)":["0.75","1.125","2","2.25"],"Overall Length - Inch (L)":["2.25","3","4","5"],"Product Overview":"4 Flute, Super Tough, TiAlN","Stainless Steels : 17-4PH":"M; Good","Helix Angle - Degree":"50","Stainless Steels : 300":"M; Good","Length of Cut - Specification":["EXTRA LONG","REGULAR","LONG"],"Units":["Inch","Metric"],"Substrate":"Carbide","Hardened Steels : 35 HRC":"H; Good","Hardened Steels : 35-45 HRC":"H; Good","Cast Iron":"K; Good","Cutting Type":"Center Cutting","Hardened Steels : 45-50 HRC":"H; Good","Shank Tolerance":"h6","Alloy Steels : 4140; 4340":"P; Good","Die Steels":"P; Good","High Carbon Steel : 1065":"P; Good","Low Carbon Steel : 1010; 1018":"P; Good","Coolant Thru":"No","Stainless Steels : 400":"M; Good","Weldon Flat":"No","Medium Carbon Steel : 1035; 1045":"P; Good","Full Description":"Performance Carbide TiAlN End Mills for Ferrous and Non-Ferrous Materials","Short Description":"Performance Carbide TiAlN End Mills for Ferrous and Non-Ferrous Materials","Mill Type":"Single End","End Cut Type":"Square End","Cutting Direction":"RH","List Name":"SUPER TOUGH MILL-SQ","Surface Treatment":"TiAlN","Cutting Diameter Tolerance - Inch":"+0 / -0.0015","Helix Direction":"RH","Diameter - Metric (D)":["4","6","8","10","12","16","20"],"Overall Length - Metric (L)":["60","75","80","102","110","125"],"Cutting Diameter Tolerance - Metric":"+0 / -0.038","Shank Diameter - Metric (d)":["6","8","10","12","16","20"],"Length of Cut - Metric (Lc)":["12","15","20","25","30","40","45"],"CategoryBrand":"HY-PRO CARB","Diameter-Sizes":"1/8\" - 20mm","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"2.25\" - 5\"","Shank-Sizes":"0.125\" - 20mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20HP451/End_Mills_-_End_Mill_-_HY-PRO_CARB_-_List_HP451_-_Square_End_-_Catalog"],"Friendly Name":"HP451"}

{"Diameter - Metric (D)":["4","8","10","12"],"Length of Cut - Metric (Lc)":["6","12","15","18"],"Number of Flutes":"4","Neck Diameter - Metric (d1)":["3.9","7.9","9.9","11.9"],"Overall Length - Metric (L)":["60","75","80","102"],"Cutting Diameter Tolerance - Metric":"+0 / -0.038","Shank Diameter - Metric (d)":["6","8","10","12"],"Neck Length - Metric (L1)":["12","24","30","36"],"Product Overview":"4 Flute, Super Tough, TiAlN","Stainless Steels : 17-4PH":"M; Good","Helix Angle - Degree":"50","Stainless Steels : 300":"M; Good","Substrate":["Carbide"],"Hardened Steels : 35 HRC":"H; Good","Hardened Steels : 35-45 HRC":"H; Good","Cast Iron":"K; Good","Cutting Type":"Center Cutting","Hardened Steels : 45-50 HRC":"H; Good","Shank Tolerance":"h6","Alloy Steels : 4140; 4340":"P; Good","Die Steels":"P; Good","High Carbon Steel : 1065":"P; Good","Low Carbon Steel : 1010; 1018":"P; Good","Coolant Thru":"No","Stainless Steels : 400":"M; Good","Units":"Metric","Weldon Flat":"No","Medium Carbon Steel : 1035; 1045":"P; Good","Full Description":"Performance Carbide TiAlN End Mills for Ferrous and Non-Ferrous Materials","Short Description":"Performance Carbide TiAlN End Mills for Ferrous and Non-Ferrous Materials","Mill Type":"Single End","Type (feature)":"Reduced Neck","End Cut Type":"Square End","Length of Cut - Specification":"STUB","Cutting Direction":"RH","List Name":"SUPER TOUGH MILL-SQ","Surface Treatment":"TiAlN","Helix Direction":"RH","CategoryBrand":"HY-PRO CARB","Diameter-Sizes":"4mm - 12mm","Flute-Sizes":"-","Neck-Sizes":"12mm - 36mm","Taper-Sizes":"-","Overall-Sizes":"60mm - 102mm","Shank-Sizes":"6mm - 12mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20HP453/End_Mills_-_End_Mill_-_HY-PRO_CARB_-_List_HP453_-_Square_End_-_Catalog"],"Friendly Name":"HP453"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20HP460/End_Mills_-_End_Mill_-_HY-PRO_CARB_-_List_HP460_-_Square_End_-_Catalog"],"Number of Flutes":"3","Overall Length - Inch (L)":["4","1.5","2","2.5","2.75","3","3.5"],"Shank Diameter - Inch (d)":["1","0.125","0.1875","0.25","0.3125","0.375","0.4375","0.5","0.625","0.75"],"Diameter - Fractional Size (D)":["1","1/8","3/16","1/4","5/16","3/8","7/16","1/2","5/8","3/4"],"Diameter - Inch (D)":["1","0.125","0.1875","0.25","0.3125","0.375","0.4375","0.5","0.625","0.75"],"Product Overview":"3 Flute, TiAlN","Length of Cut - Inch (Lc)":["1.5","0.5","0.625","0.75","0.8125","1","1.25"],"Stainless Steels : 17-4PH":"M; Good","Web Literature 4":"800388CA","Stainless Steels : 300":"M; Good","Helix Angle - Degree":"60","Web Literature 1":"8002024CA-EM,120|8002024CA-EMT,64","Units":["Inch","Metric"],"Substrate":"Carbide","Hardened Steels : 35 HRC":"H; Good","Hardened Steels : 35-45 HRC":"H; Good","Cast Iron":"K; Good","Cutting Type":"Center Cutting","Hardened Steels : 45-50 HRC":"H; Good","Shank Tolerance":"h6","Alloy Steels : 4140; 4340":"P; Good","List Name":"High Helix","High Carbon Steel : 1065":"P; Good","Low Carbon Steel : 1010; 1018":"P; Good","View Speed and Feed Page":"Here","View Catalog Page":"Here","Coolant Thru":"No","Stainless Steels : 400":"M; Good","Weldon Flat":"No","Medium Carbon Steel : 1035; 1045":"P; Good","Full Description":"Performance Carbide TiAlN End Mills for Ferrous and Non-Ferrous Materials","Short Description":"Performance Carbide TiAlN End Mills for Ferrous and Non-Ferrous Materials","Mill Type":"Single End","End Cut Type":"Square End","Length of Cut - Specification":["STUB","LONG","REGULAR"],"Cutting Direction":"RH","Surface Treatment":"TiAlN","Cutting Diameter Tolerance - Inch":"+0 / -0.0015","Helix Direction":"RH","Titanium : 6AL4V (30HRC)":"S; Good","Diameter - Metric (D)":["3","4","5","6","8","10","12","14","16","18","20","25"],"Overall Length - Metric (L)":["64","70","76","89","102"],"Cutting Diameter Tolerance - Metric":"+0 / -0.038","Shank Diameter - Metric (d)":["6","8","10","12","14","16","18","20","25"],"Length of Cut - Metric (Lc)":["12","14","16","19","21","25","29","32","38"],"Diameter-Sizes":"3mm - 1\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"1.5\" - 102mm","Shank-Sizes":"0.125\" - 1\"","Friendly Name":"HP460","CategoryBrand":"HY-PRO CARB"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20VG441/End_Mills_-_End_Mill_-_HY-PRO_CARB_-_List_VG441_-_Variable_Geometry_-_Catalog","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20VG441/End_Mills_-_End_Mill_-_HY-PRO_CARB_-_List_VG441_-_Variable_Geometry_-_Extra_4","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20VG441/End_Mills_-_End_Mill_-_HY-PRO_CARB_-_List_VG441_-_Variable_Geometry_-_Extra_3"],"Overall Length - Inch (L)":["4","5","6","7","1.5","2","2.5","3.25","2.75","3","3.5","6.25"],"Number of Flutes":"4","Shank Diameter - Inch (d)":["1","0.125","0.1875","0.25","0.3125","0.375","0.4375","0.5","0.625","0.75"],"Diameter - Fractional Size (D)":["1","1/8","3/16","1/4","5/16","3/8","7/16","1/2","5/8","3/4"],"Diameter - Inch (D)":["1","0.125","0.1875","0.25","0.3125","0.375","0.4375","0.5","0.625","0.75"],"Length of Cut - Inch (Lc)":["1.5","2","2.5","3","4","0.375","0.4375","0.75","1.25","0.8125","1.625","0.5","0.875","1","0.625","2.25"],"Helix Angle - Degree":"35","Product Overview":"4-Flute, Square, Multiple Lengths","Web Literature 4":"800388CA","Web Literature 1":["8002024CA-EM,100|8002024CA-EMT,52","8002024CA-EM,99|8002024CA-EMT,52"],"Web Video 2":"https://youtu.be/4DglWE9T5Vc","Web Video 1":"https://youtu.be/BY9mzA6_rUw","Web Video 3":"https://youtu.be/FA4u_qWSK2k","Hardened Steels : 35 HRC":"H; Best","Hardened Steels : 35-45 HRC":"H; Best","Alloy Steels : 4140; 4340":"P; Best","Units":"Inch","Substrate":"Carbide","Die Steels":"P; Best","Cast Iron":"K; Best","High Carbon Steel : 1065":"P; Best","Low Carbon Steel : 1010; 1018":"P; Best","Cutting Type":"Center Cutting","Hardened Steels : 45-50 HRC":"H; Good","Medium Carbon Steel : 1035; 1045":"P; Best","Stainless Steels : 17-4PH":"M; Best","Shank Tolerance":"h6","Stainless Steels : 300":"M; Best","Stainless Steels : 400":"M; Best","Full Description":"High Performance Variable Index End Mills for Difficult to Machine Materials","Short Description":"High Performance Variable Index End Mills for Difficult to Machine Materials","View Speed and Feed Page":"Here","View Catalog Page":"Here","Coolant Thru":"No","Weldon Flat":["Yes","No"],"Mill Type":"Single End","Benefit 2":"Provides additional stability when taking deeper depths of cut for more consistent performance during roughing.","Benefit 3":"Provides stable wear resistance in high temperature milling conditions.","Feature 2":"Raised Land Configuration","Benefit 1":"Reduces vibration from harmonic vibration, increasing life and enabling more aggressive milling.","End Cut Type":"Square End","Length of Cut - Specification":["STUB","REGULAR","LONG","EXTRA LONG"],"Cutting Direction":"RH","Feature 3":"TiAIN Coating","Surface Treatment":"TiAlN","Cutting Diameter Tolerance - Inch":"+0 / -0.0015","Feature 1":"Unequal Flute Spacing","Helix Direction":"RH","Nickel Alloy : Inconel":"S; Best","Titanium : 6AL4V (30HRC)":"S; Best","List Name":"VGX SQ","Diameter-Sizes":"1/8\" - 1\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"1.5\" - 7\"","Shank-Sizes":"0.125\" - 1\"","Friendly Name":"VG441","CategoryBrand":"HY-PRO CARB"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20VG464/End_Mills_-_End_Mill_-_HY-PRO_CARB_-_List_VG464_-_Variable_Geometry_-_Catalog"],"Number of Flutes":"4","Overall Length - Inch (L)":["6","7","4","5"],"Shank Diameter - Inch (d)":["1","0.25","0.375","0.5","0.625","0.75"],"Diameter - Fractional Size (D)":["1","1/4","3/8","1/2","5/8","3/4"],"Diameter - Inch (D)":["1","0.25","0.375","0.5","0.625","0.75"],"Length of Cut - Inch (Lc)":["1.125","0.375","0.5","0.625","0.75","1"],"Helix Angle - Degree":"35","Product Overview":"4-Flute, Extended Length, Square & Corner Chamfer","Web Literature 4":"800388CA","Web Literature 1":"8002024CA-EM,101|8002024CA-EMT,53","Web Video 2":"https://youtu.be/4DglWE9T5Vc","Web Video 1":"https://youtu.be/BY9mzA6_rUw","Web Video 3":"https://youtu.be/FA4u_qWSK2k","Hardened Steels : 35 HRC":"H; Best","Hardened Steels : 35-45 HRC":"H; Best","Alloy Steels : 4140; 4340":"P; Best","Units":"Inch","Substrate":"Carbide","Die Steels":"P; Best","Cast Iron":"K; Best","High Carbon Steel : 1065":"P; Best","Low Carbon Steel : 1010; 1018":"P; Best","Cutting Type":"Center Cutting","Hardened Steels : 45-50 HRC":"H; Good","Type (feature)":"Long Shank","Medium Carbon Steel : 1035; 1045":"P; Best","Stainless Steels : 17-4PH":"M; Best","Shank Tolerance":"h6","Stainless Steels : 300":"M; Best","Stainless Steels : 400":"M; Best","Full Description":"High Performance Variable Index End Mills for Difficult to Machine Materials","Short Description":"High Performance Variable Index End Mills for Difficult to Machine Materials","View Speed and Feed Page":"Here","View Catalog Page":"Here","Coolant Thru":"No","Weldon Flat":["Yes","No"],"Mill Type":"Single End","Benefit 2":"Provides additional stability when taking deeper depths of cut for more consistent performance during roughing.","Benefit 3":"Provides stable wear resistance in high temperature milling conditions.","Feature 2":"Raised Land Configuration","Benefit 1":"Reduces vibration from harmonic vibration, increasing life and enabling more aggressive milling.","End Cut Type":["Square End","Corner Chamfer"],"Length of Cut - Specification":"STUB","Cutting Direction":"RH","Feature 3":"TiAIN Coating","Surface Treatment":"TiAlN","Cutting Diameter Tolerance - Inch":"+0 / -0.0015","Feature 1":"Unequal Flute Spacing","Helix Direction":"RH","Nickel Alloy : Inconel":"S; Best","Titanium : 6AL4V (30HRC)":"S; Best","List Name":"VGX LS-SQ/CF","Corner Chamfer - Inch (C)":["0.02","0.016"],"Diameter-Sizes":"1/4\" - 1\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"4\" - 7\"","Shank-Sizes":"0.25\" - 1\"","Friendly Name":"VG464","CategoryBrand":"HY-PRO CARB"}

{"Overall Length - Inch (L)":["4","1.5","2","2.5","3","3.5"],"Number of Flutes":"5","Shank Diameter - Inch (d)":["1","0.125","0.1875","0.3125","0.375","0.625","0.75"],"Diameter - Fractional Size (D)":["1","1/8","3/16","5/16","3/8","5/8","3/4"],"Diameter - Inch (D)":["1","0.125","0.1875","0.3125","0.375","0.625","0.75"],"Length of Cut - Inch (Lc)":["1.5","1.25","0.375","0.4375","0.46875","0.875","0.75","1.125"],"Helix Angle - Degree":"38","Product Overview":"5-Flute, Square, Multiple Lengths","Web Video 2":"-","Web Video 1":"https://youtu.be/BY9mzA6_rUw","Web Video 3":"https://youtu.be/FA4u_qWSK2k","Hardened Steels : 35 HRC":"H; Best","Hardened Steels : 35-45 HRC":["H; Best"],"Alloy Steels : 4140; 4340":"P; Best","Units":"Inch","Substrate":"Carbide","Die Steels":"P; Best","Cast Iron":"K; Best","High Carbon Steel : 1065":"P; Best","Low Carbon Steel : 1010; 1018":"P; Best","Hardened Steels : 45-50 HRC":"H; Good","Medium Carbon Steel : 1035; 1045":"P; Best","Stainless Steels : 17-4PH":"M; Best","Shank Tolerance":"h6","Stainless Steels : 300":"M; Best","Stainless Steels : 400":"M; Best","Full Description":"High Performance Variable Index End Mills for Difficult to Machine Materials","Short Description":"High Performance Variable Index End Mills for Difficult to Machine Materials","Coolant Thru":"No","Weldon Flat":["No","Yes"],"Cutting Type":"Non-Center Cutting","Mill Type":"Single End","Benefit 2":"Provides additional stability when taking deeper depths of cut for more consistent performance during roughing.","Benefit 3":"Provides stable wear resistance in high temperature milling conditions.","Feature 2":"Raised Land Configuration","Benefit 1":"Reduces vibration from harmonic vibration, increasing life and enabling more aggressive milling.","End Cut Type":"Square End","Length of Cut - Specification":["STUB","REGULAR"],"Cutting Direction":"RH","Feature 3":"TiAIN Coating","Surface Treatment":"TiAlN","Cutting Diameter Tolerance - Inch":"+0 / -0.0015","Feature 1":"Unequal Flute Spacing","Helix Direction":"RH","Nickel Alloy : Inconel":"S; Best","Titanium : 6AL4V (30HRC)":"S; Best","List Name":"VGX SQ","Aluminum : 6061; 7075":"-","Aluminum : Casting":"-","Aramid Fiber (AFRP)":"-","Benefit 4":"-","Bottom Edge Radius - Metric (R2)":"-","Brass, Bronze":"-","Carbon Fiber (CFRP)":"-","Carbon Fiber / Al / Ti / CRES Stack":"-","Carbon Fiber / Aluminum Stack":"-","Carbon Fiber / Titanium Stack":"-","Carbon/Carbon":"-","Coating Thickness (µm)":"-","Cobalt-Chrome":"-","Compatible Machine":"-","Compression Length - Inch (L2)":"-","Contour Milling":"-","Corner Chamfer - Inch (C)":"-","Corner Chamfer - Metric (C)":"-","Corner Radius - Inch (R)":"-","Corner Radius - Metric (R)":"-","Cut Incline Angle - Degree (α)":"-","Cut Incline Angle Tolerance - Degree":"-","Cutting Diameter Tolerance - Metric":"-","Deep Side Milling":"-","Diameter - Metric (D)":"-","Diameter at Center of Radius - Metric (dm)":"-","Edge Radius - Metric (R3)":"-","Effective Diameter - Inch (DCF)":"-","Effective Diameter - Metric (DCF)":"-","Effective Draft Angle - Degree (α)":"-","Effective Neck Length by Incline Angle 0.5° - Inch":"-","Effective Neck Length by Incline Angle 0.5° - Metric":"-","Effective Neck Length by Incline Angle 0° - Inch":"-","Effective Neck Length by Incline Angle 0° - Metric":"-","Effective Neck Length by Incline Angle 1.5° - Inch":"-","Effective Neck Length by Incline Angle 1.5° - Metric":"-","Effective Neck Length by Incline Angle 1° - Inch":"-","Effective Neck Length by Incline Angle 1° - Metric":"-","Effective Neck Length by Incline Angle 2.5° - Metric":"-","Effective Neck Length by Incline Angle 2° - Inch":"-","Effective Neck Length by Incline Angle 2° - Metric":"-","Effective Neck Length by Incline Angle 3° - Inch":"-","Effective Neck Length by Incline Angle 3° - Metric":"-","Effective Radius - Metric (rt)":"-","Feature 4":"-","Form Tolerance - Metric":"-","Glass Ceramics":"-","Glass Fiber (GFRP)":"-","Graphite":"-","Hardened Steels : 50-70 HRC":"-","Helical Milling":"-","Honeycomb: AFRP":"-","Honeycomb: AI/AI":"-","Honeycomb: CFRP/AI":"-","Honeycomb: CFRP/Nomex":"-","Honeycomb: GFRP/Nomex":"-","Hybrid Ceramic / Composite":"-","Included Angle - Degree (α)":"-","Interference Angle - Degree (α)":"-","L/D Ratio":"-","Length of Cut - Metric (Lc)":"-","Length to Center of Radius - Metric (Lm)":"-","Magnesium":"-","Neck Diameter - Inch (d1)":"-","Neck Diameter - Metric (d1)":"-","Neck Diameter Max - Inch (d1 Max)":"-","Neck Diameter Max - Metric (d1 Max)":"-","Neck Diameter Min - Inch (d1 Min)":"-","Neck Diameter Min - Metric (d1 Min)":"-","Neck Draft Angle - Degree (ß)":"-","Neck Length - Inch (L1)":"-","Neck Length - Metric (L1)":"-","Neck Taper Angle - Degree (α)":"-","Non-Taper Neck Length - Inch (L2)":"-","Non-Taper Neck Length - Metric (L2)":"-","Notes":"-","Overall Length - Metric (L)":"-","PEEK":"-","Peripheral Edge Radius - Metric (R2)":"-","Plunging":"-","Radius Tolerance - Inch":"-","Radius Tolerance - Metric":"-","Ramping":"-","Shank Diameter - Metric (d)":"-","Side Milling":"-","Slotting":"-","Taper Angle Tolerance - Degree":"-","Taper Diameter - Metric (Ds)":"-","Taper per Side - Degree (α)":"-","Tilt Angle - Degree (α/2)":"-","Tip Radius - Metric (R1)":"-","Titanium":"-","Trochoidal Milling":"-","Type":"-","Type (feature)":"-","Wax/PMMA":"-","Web Literature 1":"-","Web Literature 2":"-","Web Literature 3":"-","Web Literature 4":"-","Zirconia":"-","View Speed and Feed Page":"-","View Catalog Page":"-","CategoryBrand":"HY-PRO CARB","Diameter-Sizes":"1/8\" - 1\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"1.5\" - 4\"","Shank-Sizes":"0.125\" - 1\"","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20VG541/End_Mills_-_End_Mill_-_HY-PRO_CARB_-_List_VG541_-_Variable_Geometry_-_Catalog"],"Friendly Name":"VG541"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20VGM3-AL/End_Mill_-_HY-PRO_CARB_VGM_-_VGM3-AL_-_Catalog","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20VGM3-AL/End_Mill_-_HY-PRO_CARB_VGM_-_VGM3-AL_-_Angle_01","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20VGM3-AL/End_Mill_-_HY-PRO_CARB_VGM_-_VGM3-AL_-_Face_Reflection","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20VGM3-AL/End_Mill_-_HY-PRO_CARB_VGM_-_VGM3-AL_-_Face","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20VGM3-AL/End_Mill_-_HY-PRO_CARB_VGM_-_VGM3-AL_-_New_Product"],"Number of Flutes":"3","Corner Radius - Inch (R)":["0.01","0.015","0.03","0.02","0.06","0.09","0.125","0.12","0.19","0.25"],"Diameter - Inch (D)":["0.125","0.1875","0.25","0.3125","0.375","0.4375","0.5","0.625","0.75","1"],"Diameter - Fractional Size (D)":["1/8","3/16","1/4","5/16","3/8","7/16","1/2","5/8","3/4","1"],"Shank Diameter - Inch (d)":["0.125","0.1875","0.25","0.3125","0.375","0.4375","0.5","0.625","0.75","1"],"L/D Ratio":["3","2.5","2.6","2.8","2.2","2"],"Benefit 1":"3 cutting edges to center; ideal for plunging and ramping.","Overall Length - Inch (L)":["1.5","2","2.5","2.75","3","3.5","4","5"],"Length of Cut - Inch (Lc)":["0.375","0.5625","0.625","0.8125","1","1.25","1.625","2"],"Product Overview":"3-Flute, Regular, Square & Corner Radius, Bright","Helix Angle - Degree":"40-43","Web Literature 4":"800388CA","Web Literature 3":"800395CA|800386CA|800383CA|800367CA|80071CA|80070CA|80063CA","Web Literature 1":"8002024CA-EM,102|8002024CA-EMT,54","Surface Treatment":"BRIGHT","Web Literature 2":"800317CA-V7","Units":"Inch","Substrate":"Carbide","Cutting Type":"Center Cutting","Feature 1":"Center Cutting","Shank Tolerance":"h6","Short Description":["High Performance Variable Geometry End Mills","High Performance Variable Geometry End Mills For Aluminum"],"View Speed and Feed Page":"Here","View Catalog Page":"Here","Coolant Thru":"No","Benefit 3":"Maintains excellent cutting edge sharpness and tool rigidity.","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Weldon Flat":"No","Mill Type":"Single End","Benefit 2":"Reduces vibration during machining.","End Cut Type":["Square End","Corner Radius"],"Length of Cut - Specification":"REGULAR","Cutting Direction":"RH","Full Description":"The HY-PRO CARB VGM3-AL end mill is a series of Variable Geometry end mills for High Speed Machining in Aluminum and Non-Ferrous Materials","Cutting Diameter Tolerance - Inch":["+0 / -0.0003","+0 / -0.0004","+0 / -0.0005"],"Helix Direction":"RH","Feature 3":"Unique Flute Geometry","Feature 2":"Variable Index","List Name":"VGM3-AL","Diameter-Sizes":"1/8\" - 1\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"1.5\" - 5\"","Shank-Sizes":"0.125\" - 1\"","Friendly Name":"VGM3-AL","CategoryBrand":"HY-PRO CARB"}

{"Surface Treatment":"Bright","Alloy Steels : 4140; 4340":[],"Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Aramid Fiber (AFRP)":"-","Benefit 1":"3 cutting edges to center; ideal for plunging and ramping.","Benefit 2":"Reduces vibration during machining.","Benefit 3":"Maintains excellent cutting edge sharpness and tool rigidity.","Benefit 4":"-","Bottom Edge Radius - Metric (R2)":"-","Brass, Bronze":"-","Carbon Fiber (CFRP)":"-","Carbon Fiber / Al / Ti / CRES Stack":"-","Carbon Fiber / Aluminum Stack":"-","Carbon Fiber / Titanium Stack":"-","Carbon/Carbon":"-","Cast Iron":"-","Coating Thickness (µm)":"-","Cobalt-Chrome":"-","Compatible Machine":"-","Compression Length - Inch (L2)":"-","Contour Milling":"-","Coolant Thru":"No","Corner Chamfer - Inch (C)":"-","Corner Chamfer - Metric (C)":"-","Corner Radius - Inch (R)":["0.01","0.015","0.03","0.06","0.09","0.125","0.19","0.25"],"Corner Radius - Metric (R)":"-","Cut Incline Angle - Degree (α)":"-","Cut Incline Angle Tolerance - Degree":"-","Cutting Diameter Tolerance - Inch":["+0 / -0.0003","+0 / -0.0004","+0 / -0.0005"],"Cutting Diameter Tolerance - Metric":"-","Cutting Direction":"RH","Cutting Type":"Center Cutting","Deep Side Milling":"-","Diameter - Fractional Size (D)":["1/8","3/16","1/4","5/16","3/8","1/2","5/8","3/4","1"],"Diameter - Inch (D)":["0.125","0.1875","0.25","0.3125","0.375","0.5","0.625","0.75","1"],"Diameter - Metric (D)":"-","Diameter at Center of Radius - Metric (dm)":"-","Die Steels":"-","Edge Radius - Metric (R3)":"-","Effective Diameter - Inch (DCF)":"-","Effective Diameter - Metric (DCF)":"-","Effective Draft Angle - Degree (α)":"-","Effective Neck Length by Incline Angle 0.5° - Inch":"-","Effective Neck Length by Incline Angle 0.5° - Metric":"-","Effective Neck Length by Incline Angle 0° - Inch":"-","Effective Neck Length by Incline Angle 0° - Metric":"-","Effective Neck Length by Incline Angle 1.5° - Inch":"-","Effective Neck Length by Incline Angle 1.5° - Metric":"-","Effective Neck Length by Incline Angle 1° - Inch":"-","Effective Neck Length by Incline Angle 1° - Metric":"-","Effective Neck Length by Incline Angle 2.5° - Metric":"-","Effective Neck Length by Incline Angle 2° - Inch":"-","Effective Neck Length by Incline Angle 2° - Metric":"-","Effective Neck Length by Incline Angle 3° - Inch":"-","Effective Neck Length by Incline Angle 3° - Metric":"-","Effective Radius - Metric (rt)":"-","End Cut Type":["Square End","Corner Radius"],"Feature 1":"Center Cutting","Feature 2":"Variable Index","Feature 3":"Unique Flute Geometry","Feature 4":"-","Form Tolerance - Metric":"-","Full Description":"The HY-PRO CARB VGM3-AL-LN end mill is a series of Variable Geometry end mills for High Speed Machining in Aluminum and Non-Ferrous Materials.","Glass Ceramics":"-","Glass Fiber (GFRP)":"-","Graphite":"-","Hardened Steels : 35 HRC":"-","Hardened Steels : 35-45 HRC":"-","Hardened Steels : 45-50 HRC":"-","Hardened Steels : 50-70 HRC":"-","Helical Milling":"-","Helix Angle - Degree":"40-43","Helix Direction":"RH","High Carbon Steel : 1065":"-","Honeycomb: AFRP":"-","Honeycomb: AI/AI":"-","Honeycomb: CFRP/AI":"-","Honeycomb: CFRP/Nomex":"-","Honeycomb: GFRP/Nomex":"-","Hybrid Ceramic / Composite":"-","Included Angle - Degree (α)":"-","Interference Angle - Degree (α)":"-","L/D Ratio":["1.25","1.166666","1.5","1.4","1.333333","1.2"],"Length of Cut - Inch (Lc)":["0.15625","0.21875","0.375","0.4375","0.5","0.625","0.75","1","1.25"],"Length of Cut - Metric (Lc)":"-","Length of Cut - Specification":"Stub","Length to Center of Radius - Metric (Lm)":"-","List Name":"VGM3-AL-LN","Low Carbon Steel : 1010; 1018":"-","Magnesium":"-","Medium Carbon Steel : 1035; 1045":"-","Mill Type":"Single End","Neck Diameter - Inch (d1)":["0.118","0.178","0.237","0.296","0.356","0.475","0.593","0.712","0.95"],"Neck Diameter - Metric (d1)":"-","Neck Diameter Max - Inch (d1 Max)":"-","Neck Diameter Max - Metric (d1 Max)":"-","Neck Diameter Min - Inch (d1 Min)":"-","Neck Diameter Min - Metric (d1 Min)":"-","Neck Draft Angle - Degree (ß)":"-","Neck Length - Inch (L1)":["0.5","0.75","1","1.25","1.5","1.3125","1.125","1.375","1.625","1.875","2.125","2.5","3","1.75","3.125","4","2.25","2.75","3.375","3.75","4.25","5","6","2.375","4.125","2","7.5","2.625","4.375","9.5"],"Neck Length - Metric (L1)":"-","Neck Taper Angle - Degree (α)":"-","Nickel Alloy : Inconel":"-","Non-Taper Neck Length - Inch (L2)":"-","Non-Taper Neck Length - Metric (L2)":"-","Notes":"-","Number of Flutes":"3","Overall Length - Inch (L)":["2.5","3","4","4.5","5","6","3.5","7","8","10","9","12.5"],"Overall Length - Metric (L)":"-","PEEK":"-","Peripheral Edge Radius - Metric (R2)":"-","Plunging":"-","Product Overview":"3-Flute, Long Length, Square & Corner Radius, Bright","Radius Tolerance - Inch":"-","Radius Tolerance - Metric":"-","Ramping":"-","Shank Diameter - Inch (d)":["0.125","0.1875","0.25","0.3125","0.375","0.5","0.625","0.75","1"],"Shank Diameter - Metric (d)":"-","Shank Tolerance":"h6","Short Description":"High Performance Variable Geometry End Mills","Side Milling":"-","Slotting":"-","Stainless Steels : 17-4PH":"-","Stainless Steels : 300":"-","Stainless Steels : 400":"-","Substrate":"Carbide","Taper Angle Tolerance - Degree":"-","Taper Diameter - Metric (Ds)":"-","Taper per Side - Degree (α)":"-","Tilt Angle - Degree (α/2)":"-","Tip Radius - Metric (R1)":"-","Titanium":"-","Titanium : 6AL4V (30HRC)":"-","Trochoidal Milling":"-","Type":"-","Type (feature)":"Reduced Neck","Units":"Inch","Wax/PMMA":"-","Web Literature 1":"-","Web Literature 2":"-","Web Literature 3":"-","Web Literature 4":"-","Web Video 1":"-","Web Video 2":"-","Web Video 3":"-","Weldon Flat":"No","Zirconia":"-","View Speed and Feed Page":"-","View Catalog Page":"-","CategoryBrand":"HY-PRO CARB","Diameter-Sizes":"1/8\" - 1\"","Flute-Sizes":"-","Neck-Sizes":"0.5\" - 9.5\"","Taper-Sizes":"-","Overall-Sizes":"2.5\" - 12.5\"","Shank-Sizes":"0.125\" - 1\"","Friendly Name":"VGM3-AL-LN","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20VGM3-AL-LN/End_Mill_-_HY-PRO_CARB_VGM_-_VGM3-AL-LN_-_Catalog"]}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20VGM5-LN/End_Mill_-_HY-PRO_CARB_VGM_-_VGM5-LN_-_Catalog","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20VGM5/End_Mill_-_HY-PRO_CARB_VGM_-_VGM5_-_Catalog","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20VGM5-NIK/End_Mill_-_HY-PRO_CARB_VGM_-_VGM5-NIK_-_Catalog","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20VGM5-NIK/End_Mill_-_HY-PRO_CARB_VGM_-_VGM5-NIK_-_Angle_02","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20VGM5-NIK/End_Mill_-_HY-PRO_CARB_VGM_-_VGM5-NIK_-_Angle_03","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20VGM5-NIK/End_Mill_-_HY-PRO_CARB_VGM_-_VGM5-NIK_-_Angle_01","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20VGM5-NIK/End_Mill_-_HY-PRO_CARB_VGM_-_VGM5-NIK_-_Face"],"Number of Flutes":"5","Diameter - Inch (D)":["0.125","0.15625","0.1875","0.21875","0.25","0.28125","0.3125","0.375","0.5","0.625","0.75","1"],"Diameter - Fractional Size (D)":["1/8","5/32","3/16","7/32","1/4","9/32","5/16","3/8","1/2","5/8","3/4","1"],"Shank Diameter - Inch (d)":["0.125","0.15625","0.1875","0.21875","0.25","0.3125","0.375","0.5","0.625","0.75","1"],"L/D Ratio":["1.5","2","3","4","5","6","1.25","2.5"],"Length of Cut - Inch (Lc)":["0.1875","0.25","0.375","0.5","0.625","0.75","0.234375","0.3125","0.46875","0.28125","0.5625","0.9375","0.328125","0.4375","1","1.25","1.5","0.421875","0.84375","1.125","2","2.5","0.78125","1.5625","1.875","2.25","3","3.75","4"],"Overall Length - Inch (L)":["1.5","2.25","2","2.5","3","4","5","3.5","6","7"],"Helix Angle - Degree":"40","Surface Treatment":"EXO","Feature 3":"EXO Coating","Web Literature 4":"800388CA","Web Literature 3":"800395CA|800386CA|800383CA|800367CA|80071CA|80070CA|80063CA","Product Overview":"5-Flute, Square & Corner Radius, Multiple Lengths","Web Literature 1":["8002024CA-EM,103|8002024CA-EMT,55","8002024CA-EM,104|8002024CA-EMT,55","8002024CA-EM,105|8002024CA-EMT,55","8002024CA-EM,106|8002024CA-EMT,55","8002024CA-EM,107|8002024CA-EMT,55","8002024CA-EM,108|8002024CA-EMT,55"],"Web Video 1":"https://youtu.be/Brdsf6TH6yk","Benefit 3":"OSG’s proprietary multi-layer coating provides longer tool life through higher wear and heat resistance than conventional TiAlN coatings","Web Video 2":"https://youtu.be/owr-tCmQVEY","Hardened Steels : 35 HRC":"H; Best","Web Literature 2":"800317CA-V7","Alloy Steels : 4140; 4340":"P; Best","Units":"Inch","Substrate":"Carbide","Die Steels":"P; Best","Cast Iron":"K; Best","High Carbon Steel : 1065":"P; Best","Hardened Steels : 35-45 HRC":"H; Good","Low Carbon Steel : 1010; 1018":"P; Best","Cutting Type":"Center Cutting","Medium Carbon Steel : 1035; 1045":"P; Best","Stainless Steels : 17-4PH":"M; Best","Shank Tolerance":"h6","Stainless Steels : 300":"M; Best","Stainless Steels : 400":"M; Best","Short Description":"High Performance Variable Geometry End Mills","View Speed and Feed Page":"Here","View Catalog Page":"Here","Coolant Thru":"No","Weldon Flat":["No","Yes"],"Mill Type":"Single End","End Cut Type":["Square End","Corner Radius"],"Length of Cut - Specification":["STUB","REGULAR","LONG","EXTRA LONG"],"Cutting Direction":"RH","Full Description":"The HY-PRO CARB VGM end mill is a series of Variable Geometry end mills for Dynamic Milling, ideal in a wide range of Steels and Stainless steels.","Cutting Diameter Tolerance - Inch":"+0 / -0.0015","Benefit 1":"Unequal flute spacing reduces vibration during machining by altering the timing of each flute engaging in the workpiece","Helix Direction":"RH","Feature 2":"Unique Flute Geometry","Feature 1":"Variable Index","Nickel Alloy : Inconel":"S; Best","List Name":"VGM5","Titanium : 6AL4V (30HRC)":"S; Best","Benefit 2":"Sharp rake angle, high helix and adjusted core diameter maintain excellent cutting edge sharpness and tool rigidity to promote smooth, stable cutting with low cutting force","Corner Radius - Inch (R)":["0.01","0.015","0.03","0.02","0.06","0.09","0.12","0.125","0.19","0.25"],"Diameter-Sizes":"1/8\" - 1\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"1.5\" - 7\"","Shank-Sizes":"0.125\" - 1\"","Friendly Name":"VGM5","CategoryBrand":"HY-PRO CARB"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20VGM5-LN/End_Mill_-_HY-PRO_CARB_VGM_-_VGM5-LN_-_Catalog","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20VGM5/End_Mill_-_HY-PRO_CARB_VGM_-_VGM5_-_Catalog","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20VGM5-NIK/End_Mill_-_HY-PRO_CARB_VGM_-_VGM5-NIK_-_Catalog","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20VGM5-NIK/End_Mill_-_HY-PRO_CARB_VGM_-_VGM5-NIK_-_Angle_02","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20VGM5-NIK/End_Mill_-_HY-PRO_CARB_VGM_-_VGM5-NIK_-_Angle_03","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20VGM5-NIK/End_Mill_-_HY-PRO_CARB_VGM_-_VGM5-NIK_-_Angle_01","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20VGM5-NIK/End_Mill_-_HY-PRO_CARB_VGM_-_VGM5-NIK_-_Face"],"Number of Flutes":"5","Neck Diameter - Inch (d1)":["0.118","0.178","0.237","0.356","0.475","0.593","0.712","0.95"],"Neck Length - Inch (L1)":["0.375","0.5","0.75","1","0.5625","1.125","1.3125","1.25","1.5","2","2.5","1.875","2.25","3","4","5","3.125","3.75","4.5"],"Diameter - Inch (D)":["0.125","0.1875","0.25","0.375","0.5","0.625","0.75","1"],"Diameter - Fractional Size (D)":["1/8","3/16","1/4","3/8","1/2","5/8","3/4","1"],"Shank Diameter - Inch (d)":["0.125","0.1875","0.25","0.375","0.5","0.625","0.75","1"],"L/D Ratio":["3","4","6","8","7","5","10"],"Length of Cut - Inch (Lc)":["0.15625","0.234375","0.3125","0.46875","0.625","0.78125","0.9375","1.25"],"Overall Length - Inch (L)":["2.25","3","2","4","5","6","7"],"Helix Angle - Degree":"40","Surface Treatment":"EXO","Feature 3":"EXO Coating","Web Literature 4":"800388CA","Web Literature 3":"800395CA|800386CA|800383CA|800367CA|80071CA|80070CA|80063CA","Product Overview":"5-Flute, Square & Corner Radius, Multiple Lengths","Web Literature 1":["8002024CA-EM,109|8002024CA-EMT,56","8002024CA-EM,110|8002024CA-EMT,56","8002024CA-EM,111|8002024CA-EMT,56","8002024CA-EM,112|8002024CA-EMT,56"],"Web Video 1":"https://youtu.be/Brdsf6TH6yk","Benefit 3":"OSG’s proprietary multi-layer coating provides longer tool life through higher wear and heat resistance than conventional TiAlN coatings","Web Video 2":"https://youtu.be/owr-tCmQVEY","Hardened Steels : 35 HRC":"H; Best","Web Literature 2":"800317CA-V7","Alloy Steels : 4140; 4340":"P; Best","Units":"Inch","Substrate":"Carbide","Die Steels":"P; Best","Cast Iron":"K; Best","High Carbon Steel : 1065":"P; Best","Hardened Steels : 35-45 HRC":"H; Good","Low Carbon Steel : 1010; 1018":"P; Best","Cutting Type":"Center Cutting","Type (feature)":"Long Neck","Medium Carbon Steel : 1035; 1045":"P; Best","Stainless Steels : 17-4PH":"M; Best","Shank Tolerance":"h6","Stainless Steels : 300":"M; Best","Stainless Steels : 400":"M; Best","Short Description":"High Performance Variable Geometry End Mills","View Speed and Feed Page":"Here","View Catalog Page":"Here","Coolant Thru":"No","Weldon Flat":"No","Benefit 2":"Sharp rake angle, high helix and adjusted core diameter maintain excellent cutting edge sharpness and tool rigidity to promote smooth, stable cutting with low cutting force","Mill Type":"Single End","End Cut Type":["Square End","Corner Radius"],"Length of Cut - Specification":"STUB","Cutting Direction":"RH","Full Description":"The HY-PRO CARB VGM end mill is a series of Variable Geometry end mills for Dynamic Milling, ideal in a wide range of Steels and Stainless steels.","Cutting Diameter Tolerance - Inch":"+0 / -0.0015","Benefit 1":"Unequal flute spacing reduces vibration during machining by altering the timing of each flute engaging in the workpiece","Helix Direction":"RH","Feature 2":"Unique Flute Geometry","Feature 1":"Variable Index","Nickel Alloy : Inconel":"S; Best","List Name":"VGM5-LN","Titanium : 6AL4V (30HRC)":"S; Best","Corner Radius - Inch (R)":["0.01","0.015","0.03","0.02","0.06","0.09","0.12","0.125","0.19","0.25"],"Diameter-Sizes":"1/8\" - 1\"","Flute-Sizes":"-","Neck-Sizes":"0.375\" - 5\"","Taper-Sizes":"-","Overall-Sizes":"2\" - 7\"","Shank-Sizes":"0.125\" - 1\"","Friendly Name":"VGM5-LN","CategoryBrand":"HY-PRO CARB"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20VGM5-LN/End_Mill_-_HY-PRO_CARB_VGM_-_VGM5-LN_-_Catalog","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20VGM5/End_Mill_-_HY-PRO_CARB_VGM_-_VGM5_-_Catalog","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20VGM5-NIK/End_Mill_-_HY-PRO_CARB_VGM_-_VGM5-NIK_-_Catalog","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20VGM7-NIK/End_Mill_-_HY-PRO_CARB_VGM_-_VGM7-NIK_-_Catalog","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20VGM5-NIK/End_Mill_-_HY-PRO_CARB_VGM_-_VGM5-NIK_-_Angle_02","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20VGM7-NIK/End_Mill_-_HY-PRO_CARB_VGM_-_VGM7-NIK_-_Angle","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20VGM5-NIK/End_Mill_-_HY-PRO_CARB_VGM_-_VGM5-NIK_-_Angle_03","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20VGM7-NIK/End_Mill_-_HY-PRO_CARB_VGM_-_VGM7-NIK_-_Face","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20VGM5-NIK/End_Mill_-_HY-PRO_CARB_VGM_-_VGM5-NIK_-_Angle_01","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20VGM5-NIK/End_Mill_-_HY-PRO_CARB_VGM_-_VGM5-NIK_-_Face"],"Number of Flutes":"5","Diameter - Inch (D)":["0.125","0.1875","0.25","0.3125","0.375","0.5","0.625","0.75","1"],"Diameter - Fractional Size (D)":["1/8","3/16","1/4","5/16","3/8","1/2","5/8","3/4","1"],"Shank Diameter - Inch (d)":["0.125","0.1875","0.25","0.3125","0.375","0.5","0.625","0.75","1"],"L/D Ratio":["3","4","5","6","2","2.5","1.25","1.5"],"Overall Length - Inch (L)":["1.5","2.25","2.5","3","4","5","3.5","6","7"],"Length of Cut - Inch (Lc)":["0.375","0.5","0.625","0.75","0.5625","0.9375","1","1.25","1.5","1.125","2","2.5","0.78125","1.5625","1.875","2.25","3","3.75","4"],"Helix Angle - Degree":"40","Surface Treatment":"EXO","Feature 3":"EXO Coating","Product Overview":"5-Flute, Square & Corner Radius, Multiple Lengths, Nicked","Benefit 3":"OSG’s proprietary multi-layer coating provides longer tool life through higher wear and heat resistance than conventional TiAlN coatings","Hardened Steels : 35 HRC":"H; Best","Alloy Steels : 4140; 4340":"P; Best","Units":"Inch","Substrate":"Carbide","Die Steels":"P; Best","Cast Iron":"K; Best","High Carbon Steel : 1065":"P; Best","Hardened Steels : 35-45 HRC":"H; Good","Low Carbon Steel : 1010; 1018":"P; Best","Cutting Type":"Center Cutting","Medium Carbon Steel : 1035; 1045":"P; Best","Stainless Steels : 17-4PH":"M; Best","Shank Tolerance":"h6","Stainless Steels : 300":"M; Best","Stainless Steels : 400":"M; Best","Short Description":"High Performance Variable Geometry End Mills","Coolant Thru":"No","Weldon Flat":"No","Benefit 2":"Sharp rake angle, high helix and adjusted core diameter maintain excellent cutting edge sharpness and tool rigidity to promote smooth, stable cutting with low cutting force","Mill Type":"Single End","End Cut Type":["Square End","Corner Radius"],"Length of Cut - Specification":["REGULAR","LONG","EXTRA LONG","STUB"],"Cutting Direction":"RH","Full Description":"The HY-PRO CARB VGM end mill is a series of Variable Geometry end mills for Dynamic Milling, ideal in a wide range of Steels and Stainless steels.","Cutting Diameter Tolerance - Inch":"+0 / -0.0015","Benefit 1":"Unequal flute spacing reduces vibration during machining by altering the timing of each flute engaging in the workpiece","Helix Direction":"RH","Feature 2":"Unique Flute Geometry","Feature 1":"Variable Index","Nickel Alloy : Inconel":"S; Best","List Name":"VGM5-NIK","Titanium : 6AL4V (30HRC)":"S; Best","Corner Radius - Inch (R)":["0.01","0.03","0.02","0.06"],"Diameter-Sizes":"1/8\" - 1\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"1.5\" - 7\"","Shank-Sizes":"0.125\" - 1\"","Friendly Name":"VGM5-NIK","CategoryBrand":"HY-PRO CARB"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20VGM6/End_Mill_-_HY-PRO_CARB_VGM_-_VGM6_-_Catalog","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20VGM6/End_Mill_-_HY-PRO_CARB_VGM_-_VGM6_-_Face"],"Number of Flutes":"6","Cutting Diameter Tolerance - Inch":"+0 / -0.0015","Diameter - Inch (D)":["0.25","0.3125","0.375","0.5","0.625","0.75","1"],"Diameter - Fractional Size (D)":["1/4","5/16","3/8","1/2","5/8","3/4","1"],"L/D Ratio":["1.5","2","3","4","5","6","1.25","2.5"],"Length of Cut - Inch (Lc)":["0.375","0.5","0.75","1","1.25","1.5","0.46875","0.625","0.9375","0.5625","1.125","2","0.78125","1.5625","1.875","2.5","2.25","3"],"Shank Diameter - Inch (d)":["0.25","0.3125","0.375","0.5","0.625","0.75","1"],"Overall Length - Inch (L)":["2","2.5","3","4","3.5","5","6"],"Helix Angle - Degree":"37","Surface Treatment":"EXO","Web Literature 4":"800388CA","Feature 3":"EXO Coating","Web Literature 3":"800395CA|800386CA|800383CA|800367CA|80071CA|80070CA|80063CA","Product Overview":"6-Flute, Square & Corner Radius, Multiple Lengths","Web Literature 1":["8002024CA-EM,113|8002024CA-EMT,57","8002024CA-EM,114|8002024CA-EMT,57"],"Web Video 1":"https://youtu.be/Brdsf6TH6yk","Benefit 3":"OSG’s proprietary multi-layer coating provides longer tool life through higher wear and heat resistance than conventional TiAlN coatings","Web Video 2":"https://youtu.be/owr-tCmQVEY","Hardened Steels : 35 HRC":"H; Best","Web Literature 2":"800317CA-V7","Alloy Steels : 4140; 4340":"P; Best","Units":"Inch","Substrate":"Carbide","Die Steels":"P; Best","Cast Iron":"K; Best","High Carbon Steel : 1065":"P; Best","Hardened Steels : 35-45 HRC":"H; Good","Low Carbon Steel : 1010; 1018":"P; Best","Medium Carbon Steel : 1035; 1045":"P; Best","Stainless Steels : 17-4PH":"M; Best","Shank Tolerance":"h6","Stainless Steels : 300":"M; Best","Stainless Steels : 400":"M; Best","Short Description":"High Performance Variable Geometry End Mills","View Speed and Feed Page":"Here","View Catalog Page":"Here","Coolant Thru":"No","Weldon Flat":"No","Cutting Type":"Non-Center Cutting","Benefit 2":"Sharp rake angle, high helix and adjusted core diameter maintain excellent cutting edge sharpness and tool rigidity to promote smooth, stable cutting with low cutting force","Mill Type":"Single End","End Cut Type":["Square End","Corner Radius"],"Length of Cut - Specification":["STUB","REGULAR","LONG","EXTRA LONG"],"Cutting Direction":"RH","Full Description":"The HY-PRO CARB VGM end mill is a series of Variable Geometry end mills for Dynamic Milling, ideal in a wide range of Steels and Stainless steels.","Benefit 1":"Unequal flute spacing reduces vibration during machining by altering the timing of each flute engaging in the workpiece","Helix Direction":"RH","Feature 2":"Unique Flute Geometry","Feature 1":"Variable Index","Nickel Alloy : Inconel":"S; Best","List Name":"VGM6","Titanium : 6AL4V (30HRC)":"S; Best","Corner Radius - Inch (R)":["0.02","0.03","0.06","0.09","0.12","0.125","0.19","0.25"],"Diameter-Sizes":"1/4\" - 1\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"2\" - 6\"","Shank-Sizes":"0.25\" - 1\"","Friendly Name":"VGM6","CategoryBrand":"HY-PRO CARB"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20VGM7/End_Mill_-_HY-PRO_CARB_VGM_-_VGM7_-_Catalog","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20VGM7-NIK/End_Mill_-_HY-PRO_CARB_VGM_-_VGM7-NIK_-_Catalog","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20VGM7/End_Mill_-_HY-PRO_CARB_VGM_-_VGM7_-_Face","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20VGM7-NIK/End_Mill_-_HY-PRO_CARB_VGM_-_VGM7-NIK_-_Angle","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20VGM7/End_Mill_-_HY-PRO_CARB_VGM_-_VGM7_-_Web_Product_Overview_1","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20VGM7-NIK/End_Mill_-_HY-PRO_CARB_VGM_-_VGM7-NIK_-_Face"],"Number of Flutes":"7","Cutting Diameter Tolerance - Inch":"+0 / -0.0015","Diameter - Inch (D)":["0.25","0.3125","0.375","0.5","0.625","0.75","1"],"Diameter - Fractional Size (D)":["1/4","5/16","3/8","1/2","5/8","3/4","1"],"L/D Ratio":["1.5","2","3","4","5","6","1.25","2.5"],"Length of Cut - Inch (Lc)":["0.375","0.5","0.75","1","1.25","1.5","0.46875","0.625","0.9375","0.5625","1.125","2","0.78125","1.5625","1.875","2.5","2.25","3"],"Shank Diameter - Inch (d)":["0.25","0.3125","0.375","0.5","0.625","0.75","1"],"Overall Length - Inch (L)":["2","2.5","3","4","3.5","5","6"],"Helix Angle - Degree":"36","Surface Treatment":"EXO","Web Literature 4":"800388CA","Feature 3":"EXO Coating","Web Literature 3":"800395CA|800386CA|800383CA|800367CA|80071CA|80070CA|80063CA","Product Overview":"7-Flute, Square & Corner Radius, Multiple Lengths","Web Literature 1":["8002024CA-EM,115|8002024CA-EMT,58","8002024CA-EM,116|8002024CA-EMT,58","8002024CA-EM,117|8002024CA-EMT,58"],"Web Video 1":"https://youtu.be/Brdsf6TH6yk","Benefit 3":"OSG’s proprietary multi-layer coating provides longer tool life through higher wear and heat resistance than conventional TiAlN coatings","Web Video 2":"https://youtu.be/owr-tCmQVEY","Hardened Steels : 35 HRC":"H; Best","Web Literature 2":"800317CA-V7","Alloy Steels : 4140; 4340":"P; Best","Units":"Inch","Substrate":"Carbide","Die Steels":"P; Best","Cast Iron":"K; Best","High Carbon Steel : 1065":"P; Best","Hardened Steels : 35-45 HRC":"H; Good","Low Carbon Steel : 1010; 1018":"P; Best","Medium Carbon Steel : 1035; 1045":"P; Best","Stainless Steels : 17-4PH":"M; Best","Shank Tolerance":"h6","Stainless Steels : 300":"M; Best","Stainless Steels : 400":"M; Best","Short Description":"High Performance Variable Geometry End Mills","View Speed and Feed Page":"Here","View Catalog Page":"Here","Coolant Thru":"No","Weldon Flat":"No","Cutting Type":"Non-Center Cutting","Benefit 2":"Sharp rake angle, high helix and adjusted core diameter maintain excellent cutting edge sharpness and tool rigidity to promote smooth, stable cutting with low cutting force","Mill Type":"Single End","End Cut Type":["Square End","Corner Radius"],"Length of Cut - Specification":["STUB","REGULAR","LONG","EXTRA LONG"],"Cutting Direction":"RH","Full Description":"The HY-PRO CARB VGM end mill is a series of Variable Geometry end mills for Dynamic Milling, ideal in a wide range of Steels and Stainless steels.","Benefit 1":"Unequal flute spacing reduces vibration during machining by altering the timing of each flute engaging in the workpiece","Helix Direction":"RH","Feature 2":"Unique Flute Geometry","Feature 1":"Variable Index","Nickel Alloy : Inconel":"S; Best","List Name":"VGM7","Titanium : 6AL4V (30HRC)":"S; Best","Corner Radius - Inch (R)":["0.02","0.03","0.06"],"Diameter-Sizes":"1/4\" - 1\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"2\" - 6\"","Shank-Sizes":"0.25\" - 1\"","Friendly Name":"VGM7","CategoryBrand":"HY-PRO CARB"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/v1695740727/Products/Milling/Solid/Square%20End/List%20VGM7-NIK/End_Mill_-_HY-PRO_CARB_VGM_-_VGM7-NIK_-_Catalog.png"],"Number of Flutes":"7","Cutting Diameter Tolerance - Inch":"+0 / -0.0015","Diameter - Inch (D)":["0.25","0.3125","0.375","0.5","0.625","0.75","1"],"Diameter - Fractional Size (D)":["1/4","5/16","3/8","1/2","5/8","3/4","1"],"L/D Ratio":["3","4","5","6","2","2.5","1.25","1.5"],"Shank Diameter - Inch (d)":["0.25","0.3125","0.375","0.5","0.625","0.75","1"],"Length of Cut - Inch (Lc)":["0.75","1","1.25","1.5","0.9375","1.125","2","0.78125","1.5625","1.875","2.5","2.25","3"],"Overall Length - Inch (L)":["2.5","3","4","3.5","5","6"],"Helix Angle - Degree":"36","Surface Treatment":"EXO","Feature 3":"EXO Coating","Product Overview":"7-Flute, Square & Corner Radius, Multiple Lengths, Nicked","Benefit 3":"OSG’s proprietary multi-layer coating provides longer tool life through higher wear and heat resistance than conventional TiAlN coatings","Hardened Steels : 35 HRC":"H; Best","Alloy Steels : 4140; 4340":"P; Best","Units":"Inch","Substrate":"Carbide","Die Steels":"P; Best","Cast Iron":"K; Best","High Carbon Steel : 1065":"P; Best","Hardened Steels : 35-45 HRC":"H; Good","Low Carbon Steel : 1010; 1018":"P; Best","Medium Carbon Steel : 1035; 1045":"P; Best","Stainless Steels : 17-4PH":"M; Best","Shank Tolerance":"h6","Stainless Steels : 300":"M; Best","Stainless Steels : 400":"M; Best","Short Description":"High Performance Variable Geometry End Mills","Coolant Thru":"No","Weldon Flat":"No","Cutting Type":"Non-Center Cutting","Benefit 2":"Sharp rake angle, high helix and adjusted core diameter maintain excellent cutting edge sharpness and tool rigidity to promote smooth, stable cutting with low cutting force","Mill Type":"Single End","End Cut Type":["Square End","Corner Radius"],"Length of Cut - Specification":["REGULAR","LONG","EXTRA LONG","STUB"],"Cutting Direction":"RH","Full Description":"The HY-PRO CARB VGM end mill is a series of Variable Geometry end mills for Dynamic Milling, ideal in a wide range of Steels and Stainless steels.","Benefit 1":"Unequal flute spacing reduces vibration during machining by altering the timing of each flute engaging in the workpiece","Helix Direction":"RH","Feature 2":"Unique Flute Geometry","Feature 1":"Variable Index","Nickel Alloy : Inconel":"S; Best","List Name":"VGM7-NIK","Titanium : 6AL4V (30HRC)":"S; Best","Corner Radius - Inch (R)":["0.02","0.03","0.06"],"Diameter-Sizes":"1/4\" - 1\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"2.5\" - 6\"","Shank-Sizes":"0.25\" - 1\"","Friendly Name":"VGM7-NIK","CategoryBrand":"HY-PRO CARB"}