BALL NOSE

{"Number of Flutes":"2","Corner Radius - Inch (R)":["0.0625","0.09375","0.125","0.15625","0.1875","0.21875","0.25","0.3125","0.375","0.5"],"Diameter - Inch (D)":["0.125","0.1875","0.25","0.3125","0.375","0.4375","0.5","0.625","0.75","1"],"Cutting Diameter Tolerance - Inch":"+0 / -0.002","Diameter - Fractional Size (D)":["1/8","3/16","1/4","5/16","3/8","7/16","1/2","5/8","3/4","1"],"Shank Diameter - Inch (d)":["0.125","0.1875","0.25","0.3125","0.375","0.4375","0.5","0.625","0.75","1"],"Product Overview":"2-Flute, Ball, Regular Length, Bright","Benefit 4":"3 - 5 times tool life","Overall Length - Inch (L)":["1.5","2","2.5","2.75","3","3.5","4","5"],"Length of Cut - Inch (Lc)":["0.375","0.5625","0.75","0.8125","1","1.25","1.625","2"],"Helix Angle - Degree":"30","Benefit 2":"Enhances tool life by reducing BUE","Brand":"EXOCARB","List Name":"AERO BLIZZARD","End Cut Type":"Ball Nose","Web Literature 1":"8002024CA-EM,290|8002024CA-EMT,157","Surface Treatment":"BRIGHT","Substrate":"Carbide","Benefit 3":"Ideal for rough and finish contouring","Units":"Inch","Web Literature 4":"800388CA","Cutting Type":"Center Cutting","Benefit 1":"Larger depth of cut and maximum feed per tooth","Shank Tolerance":"h6","Feature 3":"DLC available on request","View Catalog Page":"Here","View Speed and Feed Page":"Here","Weldon Flat":"No","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Mill Type":"Single End","Full Description":"Performance Carbide Ball Mills For Aluminum","Short Description":"Performance Carbide Ball Mills For Aluminum","Feature 1":"Refined geometry","Length of Cut - Specification":"REGULAR","Cutting Direction":"RH","Helix Direction":"RH","Feature 2":"Ultra smooth Flutes","Diameter-Sizes":"1/8\" - 1\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"1.5\" - 5\"","Shank-Sizes":"0.125\" - 1\"","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%202010/End_Mills_-_End_Mill_-_EXOCARB_AERO_Blizzard_-_List_2010_-_Catalog"],"Friendly Name":"2010"}

{"Number of Flutes":"2","Corner Radius - Inch (R)":["0.015625","0.03125","0.046875","0.0625","0.09375","0.125","0.15625","0.1875","0.25","0.078125"],"Diameter - Inch (D)":["0.03125","0.0625","0.09375","0.125","0.1875","0.25","0.3125","0.375","0.5","0.15625"],"Diameter - Fractional Size (D)":["1/32","1/16","3/32","1/8","3/16","1/4","5/16","3/8","1/2","5/32"],"Product Overview":"2 Flute, Regular Length, WXL","Length of Cut - Inch (Lc)":["0.03125","0.0625","0.09375","0.125","0.1875","0.25","0.3125","0.375","0.5","0.15625"],"Shank Diameter - Inch (d)":["0.25","0.3125","0.375","0.5"],"Helix Angle - Degree":"30","Overall Length - Inch (L)":["2.5","3","4"],"Web Literature 4":"800388CA","Feature 2":"High Precision geometry - Ball End Mills have +/-5um radius tolerance","Feature 3":"High strength core diameter","Benefit 4":"Higher coating oxidation temp & hardness dramatically improve wear resistance.","Brand":"EXOCARB","Web Video 1":"https://youtu.be/dNdGq78-DvA","Web Literature 1":"8002024CA-EM,272|8002024CA-EMT,141","End Cut Type":"Ball Nose","Hardened Steels : 35 HRC":"H; Best","Web Literature 2":"800304CA","Hardened Steels : 35-45 HRC":"H; Best","Alloy Steels : 4140; 4340":"P; Best","Units":"Inch","Substrate":"Carbide","Web Literature 3":"800366CA|800365CA","Hardened Steels : 45-50 HRC":"H; Best","Die Steels":"P; Best","Cast Iron":"K; Best","High Carbon Steel : 1065":"P; Best","Cutting Type":"Center Cutting","Low Carbon Steel : 1010; 1018":"P; Best","Hardened Steels : 50-70 HRC":"H; Good","Medium Carbon Steel : 1035; 1045":"P; Best","Stainless Steels : 17-4PH":"M; Best","Shank Tolerance":"h6","Stainless Steels : 300":"M; Best","Benefit 2":"High accuracy all but eliminates need for benching and rework for mold makers.","Stainless Steels : 400":"M; Best","View Catalog Page":"Here","View Speed and Feed Page":"Here","Aluminum : Casting":"N; Good","Weldon Flat":"No","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Good","Mill Type":"Single End","Full Description":"Premium High Performance Carbide Ball Mills for Pre-hardened & Hardened Steels","Short Description":"Premium High Performance Carbide Ball Mills for Pre-hardened & Hardened Steels","Cutting Direction":"RH","Length of Cut - Specification":"STUB","Benefit 1":"The hardest ost wear resistant carbide possible for incredible wear resistance.","Helix Direction":"RH","Radius Tolerance - Inch":["+/- 0.0002","+0.0001 / -0.0003","+/- 0.0004"],"Benefit 3":"Tools utilize thicker core diameters for the ultimate in strength and rigidity.","Feature 1":"Ultra-fine micrograin carbide","Nickel Alloy : Inconel":"S; Good","Surface Treatment":"WXL","Feature 4":"WXL coating - +1100 Celsius Oxidation Temp. & +3100Hv in hardness","List Name":"WXL-EBD","Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"1/32\" - 0.5\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"2.5\" - 4\"","Shank-Sizes":"0.25\" - 0.5\"","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%203610/End_Mills_-_End_Mill_-_EXOCARB_WXL_-_List_3610_-_Catalog"],"Friendly Name":"3610"}

{"Number of Flutes":"2","Corner Radius - Inch (R)":["0.007812","0.015625","0.03125","0.046875","0.0625","0.09375","0.125"],"Neck Diameter - Inch (d1)":["0.013385","0.029133","0.060629","0.091732","0.123228","0.185433","0.248031"],"Neck Length - Inch (L1)":["0.046875","0.09375","0.15625","0.3125","0.40625","0.625","0.8125","0.46875","0.9375","1.40625","1.25","1.875","2"],"Diameter - Inch (D)":["0.015625","0.03125","0.0625","0.09375","0.125","0.1875","0.25"],"Diameter - Fractional Size (D)":["1/64","1/32","1/16","3/32","1/8","3/16","1/4"],"Shank Diameter - Inch (d)":["0.125","0.25"],"Product Overview":"2 FLute, Regular Length, Long Neck, Ball End, Rib Processing, WXL","Length of Cut - Inch (Lc)":["0.015625","0.03125","0.0625","0.09375","0.125","0.1875","0.25"],"Helix Angle - Degree":"30","Overall Length - Inch (L)":["2.5","3","2.875","3.125","3.75","3.5","4","4.5"],"Web Literature 4":"800388CA","Feature 2":"High Precision geometry - Ball End Mills have +/-5um radius tolerance","Feature 3":"High strength core diameter","Benefit 4":"Higher coating oxidation temp & hardness dramatically improve wear resistance.","Brand":"EXOCARB","Web Video 1":"https://youtu.be/dNdGq78-DvA","Web Literature 1":"8002024CA-EM,274|8002024CA-EMT,143","End Cut Type":"Ball Nose","Hardened Steels : 35 HRC":"H; Best","Web Literature 2":"800304CA","Hardened Steels : 35-45 HRC":"H; Best","Alloy Steels : 4140; 4340":"P; Best","Units":"Inch","Substrate":"Carbide","Web Literature 3":"800366CA|800365CA","Hardened Steels : 45-50 HRC":"H; Best","Die Steels":"P; Best","Cast Iron":"K; Best","High Carbon Steel : 1065":"P; Best","Cutting Type":"Center Cutting","Low Carbon Steel : 1010; 1018":"P; Best","Hardened Steels : 50-70 HRC":"H; Good","Type (feature)":"Long Neck","Medium Carbon Steel : 1035; 1045":"P; Best","Stainless Steels : 17-4PH":"M; Best","Shank Tolerance":"h6","Stainless Steels : 300":"M; Best","Benefit 2":"High accuracy all but eliminates need for benching and rework for mold makers.","Stainless Steels : 400":"M; Best","View Catalog Page":"Here","View Speed and Feed Page":"Here","Aluminum : Casting":"N; Good","Weldon Flat":"No","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Good","Mill Type":"Single End","Full Description":"Premium High Performance Carbide Ball Mills for Pre-hardened & Hardened Steels","Short Description":"Premium High Performance Carbide Ball Mills for Pre-hardened & Hardened Steels","Cutting Direction":"RH","Length of Cut - Specification":"STUB","Benefit 1":"The hardest ost wear resistant carbide possible for incredible wear resistance.","Helix Direction":"RH","Radius Tolerance - Inch":"+/- 0.0002","Benefit 3":"Tools utilize thicker core diameters for the ultimate in strength and rigidity.","Feature 1":"Ultra-fine micrograin carbide","Nickel Alloy : Inconel":"S; Good","Surface Treatment":"WXL","Feature 4":"WXL coating - +1100 Celsius Oxidation Temp. & +3100Hv in hardness","List Name":"WXL-LN-EBD","Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"1/64\" - 0.25\"","Flute-Sizes":"-","Neck-Sizes":"0.046875\" - 2\"","Taper-Sizes":"-","Overall-Sizes":"2.5\" - 4.5\"","Shank-Sizes":"0.125\" - 0.25\"","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%203690/End_Mills_-_End_Mill_-_EXOCARB_WXL_-_List_3690_-_Catalog"],"Friendly Name":"3690"}

{"Number of Flutes":"2","Corner Radius - Metric (R)":["0.05","0.1","0.15","0.2","0.25","0.3","0.4","0.5","0.6","0.7","0.75","0.8","1","1.25","1.5","2","1.75","2.5","3","3.5","4","4.5","5","5.5","6","7","8","9","10"],"Overall Length - Metric (L)":["40","50","60","70","80","90","100","110","140","160"],"Shank Diameter - Metric (d)":["4","6","8","10","12","16","20"],"Product Overview":"2 Flute, Regular Length, Ball End, WXL","Diameter - Metric (D)":["0.1","0.2","0.3","0.4","0.5","0.6","0.8","1","1.2","1.4","1.5","1.6","2","2.5","3","4","3.5","5","6","7","8","9","10","11","12","14","16","18","20"],"Helix Angle - Degree":"30","Web Literature 4":"800388CA","Length of Cut - Metric (Lc)":["0.2","0.4","0.6","0.8","1.1","2","1.5","3","3.5","4","4.5","8","2.5","5","6","12","10","14","18","15","22","26","30","34","38"],"Feature 2":"High Precision geometry - Ball End Mills have +/-5um radius tolerance","Feature 3":"High strength core diameter","Benefit 4":"Higher coating oxidation temp & hardness dramatically improve wear resistance.","Brand":"EXOCARB","Web Video 1":"https://youtu.be/dNdGq78-DvA","Web Literature 1":"8002024CA-EM,273|8002024CA-EMT,142","Hardened Steels : 35 HRC":"H; Best","End Cut Type":"Ball Nose","Web Literature 2":"800304CA","Hardened Steels : 35-45 HRC":"H; Best","Alloy Steels : 4140; 4340":"P; Best","Substrate":"Carbide","Web Literature 3":"800366CA|800365CA","Hardened Steels : 45-50 HRC":"H; Best","Die Steels":"P; Best","Cast Iron":"K; Best","High Carbon Steel : 1065":"P; Best","Cutting Type":"Center Cutting","Low Carbon Steel : 1010; 1018":"P; Best","Hardened Steels : 50-70 HRC":"H; Good","Medium Carbon Steel : 1035; 1045":"P; Best","Stainless Steels : 17-4PH":"M; Best","Shank Tolerance":"h6","Stainless Steels : 300":"M; Best","Benefit 2":"High accuracy all but eliminates need for benching and rework for mold makers.","Stainless Steels : 400":"M; Best","View Catalog Page":"Here","View Speed and Feed Page":"Here","Aluminum : Casting":"N; Good","Units":"Metric","Weldon Flat":"No","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Good","Mill Type":"Single End","Full Description":"Premium High Performance Carbide Ball Mills for Pre-hardened & Hardened Steels","Short Description":"Premium High Performance Carbide Ball Mills for Pre-hardened & Hardened Steels","Length of Cut - Specification":["REGULAR","STUB"],"Cutting Direction":"RH","Benefit 1":"The hardest ost wear resistant carbide possible for incredible wear resistance.","Helix Direction":"RH","Benefit 3":"Tools utilize thicker core diameters for the ultimate in strength and rigidity.","Radius Tolerance - Metric":["+/- 0.005","+0.003 / -0.007","+/- 0.010"],"Feature 1":"Ultra-fine micrograin carbide","Nickel Alloy : Inconel":"S; Good","Surface Treatment":"WXL","Feature 4":"WXL coating - +1100 Celsius Oxidation Temp. & +3100Hv in hardness","Titanium : 6AL4V (30HRC)":"S; Good","List Name":"WXL-EBD","Diameter-Sizes":"0.1mm - 20mm","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"40mm - 160mm","Shank-Sizes":"4mm - 20mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%203710/End_Mills_-_End_Mill_-_EXOCARB_WXL_-_List_3710_-_Catalog"],"Friendly Name":"3710"}

{"Length of Cut - Metric (Lc)":["2.5","5","8","10","12","14","18","22","26","30","34"],"Number of Flutes":"2","Corner Radius - Metric (R)":["0.5","1","1.5","2","2.5","3","3.5","4","5","6","7","8","9"],"Shank Diameter - Metric (d)":["3","4","6","8","10","12","16"],"Overall Length - Metric (L)":["70","80","100","140","160","180","200","220"],"Product Overview":"2 Flute, Regular Length, Long Shank, WXL","Diameter - Metric (D)":["1","2","3","4","5","6","7","8","10","12","14","16","18"],"Helix Angle - Degree":"30","Web Literature 4":"800388CA","Feature 2":"High Precision geometry - Ball End Mills have +/-5um radius tolerance","Feature 3":"High strength core diameter","Benefit 4":"Higher coating oxidation temp & hardness dramatically improve wear resistance.","Brand":"EXOCARB","Web Video 1":"https://youtu.be/dNdGq78-DvA","Web Literature 1":"8002024CA-EM,277|8002024CA-EMT,147","End Cut Type":"Ball Nose","Hardened Steels : 35 HRC":"H; Best","Web Literature 2":"800304CA","Hardened Steels : 35-45 HRC":"H; Best","Alloy Steels : 4140; 4340":"P; Best","Substrate":"Carbide","Web Literature 3":"800366CA|800365CA","Hardened Steels : 45-50 HRC":"H; Best","Die Steels":"P; Best","Cast Iron":"K; Best","High Carbon Steel : 1065":"P; Best","Cutting Type":"Center Cutting","Low Carbon Steel : 1010; 1018":"P; Best","Hardened Steels : 50-70 HRC":"H; Good","Medium Carbon Steel : 1035; 1045":"P; Best","Type (feature)":"Long Shank","Stainless Steels : 17-4PH":"M; Best","Shank Tolerance":"h6","Stainless Steels : 300":"M; Best","Benefit 2":"High accuracy all but eliminates need for benching and rework for mold makers.","Stainless Steels : 400":"M; Best","View Catalog Page":"Here","View Speed and Feed Page":"Here","Aluminum : Casting":"N; Good","Units":"Metric","Weldon Flat":"No","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Good","List Name":"WXL-LS-EBD","Mill Type":"Single End","Full Description":"Premium High Performance Carbide End Mills for Pre-hardened & Hardened Steels","Short Description":"Premium High Performance Carbide End Mills for Pre-hardened & Hardened Steels","Length of Cut - Specification":["REGULAR","STUB"],"Cutting Direction":"RH","Benefit 1":"The hardest ost wear resistant carbide possible for incredible wear resistance.","Helix Direction":"RH","Radius Tolerance - Metric":["+/- 0.005","+/- 0.010"],"Benefit 3":"Tools utilize thicker core diameters for the ultimate in strength and rigidity.","Feature 1":"Ultra-fine micrograin carbide","Nickel Alloy : Inconel":"S; Good","Surface Treatment":"WXL","Feature 4":"WXL coating - +1100 Celsius Oxidation Temp. & +3100Hv in hardness","Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"1mm - 18mm","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"70mm - 220mm","Shank-Sizes":"3mm - 16mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%203711/End_Mills_-_End_Mill_-_EXOCARB_WXL_-_List_3711_-_Catalog"],"Friendly Name":"3711"}

{"Length of Cut - Metric (Lc)":["8.2","9.9","11.7","13.5","18","17.1"],"Length to Center of Radius - Metric (Lm)":["3.43","4.48","5.52","6.57","8.99","8.67"],"Diameter - Metric (D)":["6","8","10","12","16"],"Number of Flutes":["4","6"],"Diameter at Center of Radius - Metric (dm)":["3.27","4.78","6.2","7.7","10.18","10.62"],"Edge Radius - Metric (R3)":"5","Tip Radius - Metric (R1)":["0.5","1","1.5","2","2.5","3"],"Overall Length - Metric (L)":["50","60","70","80","100"],"Shank Diameter - Metric (d)":["6","8","10","12","16"],"Peripheral Edge Radius - Metric (R2)":["150","300","500"],"Helix Angle - Degree":"15","Tilt Angle - Degree (α/2)":"20","Web Literature 4":"800388CA","Web Video 1":"https://youtu.be/1peM44Agm5w","Brand":"EXOCARB","Web Literature 1":"8002024CA-EM,283|8002024CA-EMT,152","Web Video 2":"https://youtu.be/NFy6vtsD1Mk","Hardened Steels : 35-45 HRC":"H; Best","Benefit 3":"Improves surface finish","Web Literature 2":"800320CA","Alloy Steels : 4140; 4340":"P; Best","Hardened Steels : 45-50 HRC":"H; Best","Substrate":"Carbide","Benefit 1":"Increase milling efficiency","Feature 2":"Increased step over","Die Steels":"P; Best","Product Overview":"Carbide, WXL Coating, Taper Barrel Type, Metric Sizes","High Carbon Steel : 1065":"P; Best","Cutting Type":"Center Cutting","Feature 1":"Large peripheral edge radius and multi-flute configuration","Low Carbon Steel : 1010; 1018":"P; Best","Shank Tolerance":"H5","Medium Carbon Steel : 1035; 1045":"P; Best","Full Description":"High Performance Taper Barrel Type End Mills for Finishing","Short Description":"High Performance Taper Barrel Type End Mills for Finishing","View Catalog Page":"Here","View Speed and Feed Page":"Here","Units":"Metric","Weldon Flat":"No","Coolant Thru":"No","Mill Type":"Single End","Feature 3":"Reduced cusp height","Benefit 2":"Reduced machining time compared to ball nose end mills","Cutting Direction":"RH","Length of Cut - Specification":"STUB","End Cut Type":"Taper Barrel","Type (feature)":"Tapered","Form Tolerance - Metric":"+/- 0.010","Helix Direction":"RH","List Name":"VU-TBR","Surface Treatment":"WXL","Diameter-Sizes":"6mm - 16mm","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"50mm - 100mm","Shank-Sizes":"6mm - 16mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%203785/End_Mills_-_End_Mill_-_EXOCARB_VU-TBR_-_List_3785_-_Catalog"],"Friendly Name":"3785"}

{"Number of Flutes":"2","Corner Radius - Metric (R)":["0.05","0.1","0.15","0.2","0.25","0.3","0.4","0.5","0.6","0.7","0.75","0.8","0.9","1","1.25","1.5","1.75","2","2.5","3"],"Neck Diameter - Metric (d1)":["0.085","0.18","0.28","0.37","0.45","0.55","0.75","0.95","1.15","1.35","1.45","1.55","1.75","1.95","2.45","2.85","3.35","3.85","4.85","5.85"],"Overall Length - Metric (L)":["45","50","55","60","65","70","75","80","85","90","100","120"],"Shank Diameter - Metric (d)":["4","6","3"],"Neck Length - Metric (L1)":["0.3","0.5","0.75","1","1.25","1.5","1.75","2","2.5","3","0.6","2.25","2.75","3.5","4","4.5","5","5.5","6","7","8","9","10","6.5","7.5","8.5","9.5","11","12","14","16","18","20","24","22","30","25","35","40","15","45","50"],"Product Overview":"2 FLute, Regular Length, Long Neck, Ball End, Rib Processing, WXL","Diameter - Metric (D)":["0.1","0.2","0.3","0.4","0.5","0.6","0.8","1","1.2","1.4","1.5","1.6","1.8","2","2.5","3","3.5","4","5","6"],"Helix Angle - Degree":"30","Length of Cut - Metric (Lc)":["0.1","0.2","0.16","0.24","0.3","0.4","0.5","0.6","0.8","1","1.1","1.2","1.3","1.4","1.6","2","2.4","2.8","3.2","5","4","6","4.8"],"Web Literature 4":"800388CA","Brand":"EXOCARB","Web Video 1":["https://youtu.be/dNdGq78-DvA","https://www.youtube.com/watch?v=cDO3qqnS8L8"],"Web Literature 1":["8002024CA-EM,275|8002024CA-EMT,143","8002024CA-EM,276|8002024CA-EMT,143"],"Hardened Steels : 35 HRC":"H; Best","End Cut Type":"Ball Nose","Hardened Steels : 35-45 HRC":"H; Best","Web Literature 2":"800304CA|800291CA","Alloy Steels : 4140; 4340":"P; Best","Substrate":"Carbide","Web Literature 3":"800366CA|800365CA","Hardened Steels : 45-50 HRC":"H; Best","Die Steels":"P; Best","Cast Iron":"K; Best","High Carbon Steel : 1065":"P; Best","Cutting Type":"Center Cutting","Low Carbon Steel : 1010; 1018":"P; Best","Hardened Steels : 50-70 HRC":"H; Good","Medium Carbon Steel : 1035; 1045":"P; Best","Type (feature)":"Long Neck","Stainless Steels : 17-4PH":"M; Best","Shank Tolerance":"h6","Stainless Steels : 300":"M; Best","Stainless Steels : 400":"M; Best","View Catalog Page":"Here","View Speed and Feed Page":"Here","Aluminum : Casting":"N; Good","Units":"Metric","Weldon Flat":"No","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Good","Mill Type":"Single End","Full Description":["Premium High Performance Carbide Ball Mills for Pre-hardened & Hardened Steels","Premium High Performance Carbide End Mills for Dental Industry"],"Short Description":["Premium High Performance Carbide Ball Mills for Pre-hardened & Hardened Steels","Premium High Performance Carbide End Mills for Dental Industry"],"Cutting Direction":"RH","Length of Cut - Specification":"STUB","Helix Direction":"RH","Radius Tolerance - Metric":"+/- 0.005","Nickel Alloy : Inconel":"S; Good","Surface Treatment":"WXL","Titanium : 6AL4V (30HRC)":"S; Good","List Name":"WXL-LN-EBD","Included Angle - Degree (α)":"-","Web Video 2":"https://youtu.be/dNdGq78-DvA","Wax/PMMA":"Other; Best","Cobalt-Chrome":"Other; Good","PEEK":"Other; Good","Zirconia":"Other; Good","Titanium":"S; Best","Diameter-Sizes":"0.1mm - 6mm","Flute-Sizes":"-","Neck-Sizes":"0.3mm - 50mm","Taper-Sizes":"-","Overall-Sizes":"45mm - 120mm","Shank-Sizes":"3mm - 6mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%203790/End_Mills_-_End_Mill_-_EXOCARB_WXL_-_List_3790_-_Catalog","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%203790/End_Mills_-_End_Mill_-_EXOCARB_WXL_-_List_3790_-_Extra_1","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%203790/OSG_-_Website_-_Product_Overview_-_WXL-LN-EBD_-_Type_2","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%203790/OSG_-_Website_-_Product_Overview_-_WXL-LN-EBD_-_Type_1"],"Friendly Name":"3790"}

{"Number of Flutes":"2","Corner Radius - Metric (R)":["0.25","0.5","0.75","1","1.25","1.5","1.75","2","2.25","2.5","3","3.5","4","4.5","5","5.5","6","7","8","9","10","11","12.5"],"Overall Length - Metric (L)":["39","51","64","70","76","89","102"],"Shank Diameter - Metric (d)":["3","4","5","6","8","10","11","12","14","16","18","20","22","25"],"Cutting Diameter Tolerance - Metric":"+0 / -0.050","Product Overview":"2 Flute, Ball End","Diameter - Metric (D)":["0.5","1","1.5","2","2.5","3","3.5","4","4.5","5","6","7","8","9","10","11","12","14","16","18","20","22","25"],"Helix Angle - Degree":"30","Length of Cut - Metric (Lc)":["1.5","3","5","7","8","10","12","14","16","19","21","22","25","30","32","35","38"],"Web Literature 4":"800388CA","Stainless Steels : 300":"M; Good","Stainless Steels : 400":"M; Good","Brand":"OSG","End Cut Type":"Ball Nose","Web Literature 1":["8002024CA-EM,307|8002024CA-EMT,167","8002024CA-EM,309|8002024CA-EMT,167","8002024CA-EM,308|8002024CA-EMT,167"],"Notes":"Other coatings available upon request.","Surface Treatment":["BRIGHT","TiAlN"],"Substrate":"Carbide","Hardened Steels : 35 HRC":"H; Good","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":"Center Cutting","Cast Iron":"K; Good","Alloy Steels : 4140; 4340":"P; Good","Die Steels":"P; Good","High Carbon Steel : 1065":"P; Good","Low Carbon Steel : 1010; 1018":"P; Good","Medium Carbon Steel : 1035; 1045":"P; Good","View Catalog Page":"Here","View Speed and Feed Page":"Here","Aluminum : Casting":"N; Good","Units":["Metric","Inch"],"Weldon Flat":"No","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Good","Mill Type":"Single End","Length of Cut - Specification":["REGULAR","LONG","STUB"],"List Name":"STANDARD CARBIDE BN","Full Description":"Standard Carbide End Mills for General Milling Applications","Short Description":"Standard Carbide End Mills for General Milling Applications","Cutting Direction":"RH","Helix Direction":"RH","Corner Radius - Inch (R)":["0.015625","0.023437","0.03125","0.039062","0.046875","0.5","0.054687","0.0625","0.070312","0.078125","0.085937","0.09375","0.101562","0.109375","0.117187","0.125","0.132812","0.140625","0.148437","0.15625","0.164062","0.171875","0.179687","0.1875","0.195312","0.203125","0.210937","0.21875","0.226562","0.234375","0.242187","0.25","0.28125","0.3125","0.34375","0.375","0.4375"],"Diameter - Inch (D)":["0.03125","0.046875","0.0625","0.078125","0.09375","1","0.109375","0.125","0.140625","0.15625","0.171875","0.1875","0.203125","0.21875","0.234375","0.25","0.265625","0.28125","0.296875","0.3125","0.328125","0.34375","0.359375","0.375","0.390625","0.40625","0.421875","0.4375","0.453125","0.46875","0.484375","0.5","0.5625","0.625","0.6875","0.75","0.875"],"Cutting Diameter Tolerance - Inch":"+0 / -0.002","Diameter - Fractional Size (D)":["1/32","3/64","1/16","5/64","3/32","1","7/64","1/8","9/64","5/32","11/64","3/16","13/64","7/32","15/64","1/4","17/64","9/32","19/64","5/16","21/64","11/32","23/64","3/8","25/64","13/32","27/64","7/16","29/64","15/32","31/64","1/2","9/16","5/8","11/16","3/4","7/8"],"Shank Diameter - Inch (d)":["0.125","1","0.1875","0.25","0.3125","0.375","0.4375","0.5","0.5625","0.625","0.75","0.875"],"Length of Cut - Inch (Lc)":["0.125","0.140625","0.1875","0.25","0.3125","1.5","0.375","0.5","0.5625","0.625","0.75","0.8125","0.875","1","1.125","1.25","1.375"],"Overall Length - Inch (L)":["1.5","4","2","2.5","2.75","3","3.5"],"Diameter-Sizes":"0.5mm - 1\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"1.5\" - 102mm","Shank-Sizes":"3mm - 1\"","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%20402BN/End_Mills_-_End_Mill_-_Carbide_-_List_402BN_-_Standard_Ball_End_-_Catalog"],"Friendly Name":"402BN"}

{"Number of Flutes":"3","Length of Cut - Metric (Lc)":["3","5","7","8","10","12","14","16","19","21","22","25","30","32","35","38"],"Corner Radius - Metric (R)":["0.5","0.75","1","1.25","1.5","1.75","2","2.25","2.5","3","3.5","4","4.5","5","5.5","6","7","8","9","10","11","12.5"],"Overall Length - Metric (L)":["39","51","64","70","76","89","102"],"Shank Diameter - Metric (d)":["3","4","5","6","8","10","11","12","14","16","18","20","22","25"],"Cutting Diameter Tolerance - Metric":"+0 / -0.050","Product Overview":"3 Flute, Ball End","Diameter - Metric (D)":["1","1.5","2","2.5","3","3.5","4","4.5","5","6","7","8","9","10","11","12","14","16","18","20","22","25"],"Helix Angle - Degree":"30","Web Literature 4":"800388CA","Stainless Steels : 300":"M; Good","Stainless Steels : 400":"M; Good","Brand":"OSG","End Cut Type":"Ball Nose","Web Literature 1":["8002024CA-EM,310|8002024CA-EMT,167","8002024CA-EM,311|8002024CA-EMT,167"],"Notes":"Other coatings available upon request.","Surface Treatment":["BRIGHT","TiAlN"],"Substrate":"Carbide","Hardened Steels : 35 HRC":"H; Good","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":"Center Cutting","Cast Iron":"K; Good","Hardened Steels : 45-50 HRC":"H; Good","Alloy Steels : 4140; 4340":"P; Good","Die Steels":"P; Good","High Carbon Steel : 1065":"P; Good","Low Carbon Steel : 1010; 1018":"P; Good","Medium Carbon Steel : 1035; 1045":"P; Good","View Catalog Page":"Here","View Speed and Feed Page":"Here","Aluminum : Casting":"N; Good","Units":["Metric","Inch"],"Weldon Flat":"No","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Good","Mill Type":"Single End","Length of Cut - Specification":["REGULAR","LONG","STUB"],"List Name":"STANDARD CARBIDE BN","Full Description":"Standard Carbide End Mills for General Milling Applications","Short Description":"Standard Carbide End Mills for General Milling Applications","Cutting Direction":"RH","Helix Direction":"RH","Corner Radius - Inch (R)":["0.03125","0.039062","0.046875","0.5","0.054687","0.0625","0.070312","0.078125","0.085937","0.09375","0.101562","0.109375","0.117187","0.125","0.132812","0.140625","0.148437","0.15625","0.1875","0.21875","0.25","0.28125","0.3125","0.34375","0.375","0.4375"],"Diameter - Inch (D)":["0.0625","0.078125","0.09375","1","0.109375","0.125","0.140625","0.15625","0.171875","0.1875","0.203125","0.21875","0.234375","0.25","0.265625","0.28125","0.296875","0.3125","0.375","0.4375","0.5","0.5625","0.625","0.6875","0.75","0.875"],"Cutting Diameter Tolerance - Inch":"+0 / -0.002","Diameter - Fractional Size (D)":["1/16","5/64","3/32","1","7/64","1/8","9/64","5/32","11/64","3/16","13/64","7/32","15/64","1/4","17/64","9/32","19/64","5/16","3/8","7/16","1/2","9/16","5/8","11/16","3/4","7/8"],"Shank Diameter - Inch (d)":["0.125","1","0.1875","0.25","0.3125","0.375","0.4375","0.5","0.5625","0.625","0.75","0.875"],"Overall Length - Inch (L)":["1.5","4","2","2.5","2.75","3","3.5"],"Length of Cut - Inch (Lc)":["0.1875","0.25","0.3125","1.5","0.375","0.5","0.5625","0.625","0.75","0.8125","1","1.125","1.25","1.375"],"Diameter-Sizes":"1mm - 1\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"1.5\" - 102mm","Shank-Sizes":"3mm - 1\"","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%20403BN/End_Mills_-_End_Mill_-_Carbide_-_List_403BN_-_Standard_Ball_End_-_Catalog"],"Friendly Name":"403BN"}

{"Number of Flutes":"4","Corner Radius - Inch (R)":["0.015625","0.023437","0.03125","0.039062","0.046875","0.5","0.054687","0.0625","0.070312","0.078125","0.085937","0.09375","0.101562","0.109375","0.117187","0.125","0.132812","0.140625","0.148437","0.15625","0.164062","0.171875","0.179687","0.1875","0.195312","0.203125","0.210937","0.21875","0.226562","0.234375","0.242187","0.25","0.28125","0.3125","0.34375","0.375","0.4375"],"Diameter - Inch (D)":["0.03125","0.046875","0.0625","0.078125","0.09375","1","0.109375","0.125","0.140625","0.15625","0.171875","0.1875","0.203125","0.21875","0.234375","0.25","0.265625","0.28125","0.296875","0.3125","0.328125","0.34375","0.359375","0.375","0.390625","0.40625","0.421875","0.4375","0.453125","0.46875","0.484375","0.5","0.5625","0.625","0.6875","0.75","0.875"],"Cutting Diameter Tolerance - Inch":"+0 / -0.002","Diameter - Fractional Size (D)":["1/32","3/64","1/16","5/64","3/32","1","7/64","1/8","9/64","5/32","11/64","3/16","13/64","7/32","15/64","1/4","17/64","9/32","19/64","5/16","21/64","11/32","23/64","3/8","25/64","13/32","27/64","7/16","29/64","15/32","31/64","1/2","9/16","5/8","11/16","3/4","7/8"],"Shank Diameter - Inch (d)":["0.125","1","0.1875","0.25","0.3125","0.375","0.4375","0.5","0.5625","0.625","0.75","0.875"],"Length of Cut - Inch (Lc)":["0.125","0.140625","0.1875","0.25","0.3125","1.5","0.375","0.5","0.5625","0.625","0.75","0.8125","0.875","1","1.125","1.25","1.375"],"Overall Length - Inch (L)":["1.5","4","2","2.5","2.75","3","3.5"],"Helix Angle - Degree":"30","Web Literature 4":"800388CA","Product Overview":"4 Flute, Ball End","Stainless Steels : 300":"M; Good","Stainless Steels : 400":"M; Good","Brand":"OSG","End Cut Type":"Ball Nose","Web Literature 1":["8002024CA-EM,312|8002024CA-EMT,168","8002024CA-EM,314|8002024CA-EMT,168","8002024CA-EM,313|8002024CA-EMT,168"],"Notes":"Other coatings available upon request.","Surface Treatment":["BRIGHT","TiAlN"],"Units":["Inch","Metric"],"Substrate":"Carbide","Hardened Steels : 35 HRC":"H; Good","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":"Center Cutting","Cast Iron":"K; Good","Hardened Steels : 45-50 HRC":"H; Good","Length of Cut - Specification":["LONG","REGULAR","STUB"],"Alloy Steels : 4140; 4340":"P; Good","Die Steels":"P; Good","High Carbon Steel : 1065":"P; Good","Low Carbon Steel : 1010; 1018":"P; Good","Medium Carbon Steel : 1035; 1045":"P; Good","View Catalog Page":"Here","View Speed and Feed Page":"Here","Aluminum : Casting":"N; Good","Weldon Flat":"No","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Good","Mill Type":"Single End","List Name":"STANDARD CARBIDE BN","Full Description":"Standard Carbide End Mills for General Milling Applications","Short Description":"Standard Carbide End Mills for General Milling Applications","Cutting Direction":"RH","Helix Direction":"RH","Length of Cut - Metric (Lc)":["3","5","7","8","10","12","14","16","19","21","22","25","30","32","35","38"],"Corner Radius - Metric (R)":["0.5","0.75","1","1.25","1.5","1.75","2","2.25","2.5","3","3.5","4","4.5","5","5.5","6","7","8","9","10","11","12.5"],"Overall Length - Metric (L)":["39","51","64","70","76","89","102"],"Shank Diameter - Metric (d)":["3","4","5","6","8","10","11","12","14","16","18","20","22","25"],"Cutting Diameter Tolerance - Metric":"+0 / -0.050","Diameter - Metric (D)":["1","1.5","2","2.5","3","3.5","4","4.5","5","6","7","8","9","10","11","12","14","16","18","20","22","25"],"Diameter-Sizes":"1/32\" - 1\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"1.5\" - 102mm","Shank-Sizes":"3mm - 1\"","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%20404BN/End_Mills_-_End_Mill_-_Carbide_-_List_404BN_-_Standard_Ball_End_-_Catalog","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%20404BN/End_Mills_-_End_Mill_-_Carbide_-_List_404BN_-_Standard_Ball_End_-_Angle_1"],"Friendly Name":"404BN"}

{"Number of Flutes":"2","Corner Radius - Inch (R)":["0.015625","0.023437","0.03125","0.039062","0.046875","0.054687","0.0625","0.070312","0.078125","0.09375","0.109375","0.125","0.15625","0.1875","0.21875","0.25","0.3125","0.375"],"Diameter - Inch (D)":["0.03125","0.046875","0.0625","0.078125","0.09375","0.109375","0.125","0.140625","0.15625","0.1875","0.21875","0.25","0.3125","0.375","0.4375","0.5","0.625","0.75"],"Cutting Diameter Tolerance - Inch":"+0 / -0.002","Diameter - Fractional Size (D)":["1/32","3/64","1/16","5/64","3/32","7/64","1/8","9/64","5/32","3/16","7/32","1/4","5/16","3/8","7/16","1/2","5/8","3/4"],"Product Overview":"2 Flute, Ball End","Shank Diameter - Inch (d)":["0.125","0.1875","0.25","0.3125","0.375","0.4375","0.5","0.625","0.75"],"Length of Cut - Inch (Lc)":["0.078125","0.09375","0.125","0.15625","0.1875","0.21875","0.25","0.28125","0.3125","0.375","0.4375","0.5","0.625","0.75","1"],"Overall Length - Inch (L)":["1.5","2","2.5","3"],"Helix Angle - Degree":"30","Web Literature 4":"800388CA","Stainless Steels : 300":"M; Good","Stainless Steels : 400":"M; Good","Brand":"OSG","Web Literature 1":"8002024CA-EM,306|8002024CA-EMT,167","End Cut Type":"Ball Nose","Notes":"Other coatings available upon request.","Surface Treatment":["BRIGHT","TiAlN"],"Units":["Inch","Metric"],"Substrate":"Carbide","Hardened Steels : 35 HRC":"H; Good","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":"Center Cutting","Cast Iron":"K; Good","Hardened Steels : 45-50 HRC":"H; Good","Alloy Steels : 4140; 4340":"P; Good","Die Steels":"P; Good","High Carbon Steel : 1065":"P; Good","Low Carbon Steel : 1010; 1018":"P; Good","Medium Carbon Steel : 1035; 1045":"P; Good","View Catalog Page":"Here","View Speed and Feed Page":"Here","Aluminum : Casting":"N; Good","Weldon Flat":"No","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Good","Mill Type":"Single End","Length of Cut - Specification":["REGULAR","STUB"],"List Name":"STANDARD CARBIDE BN","Full Description":"Standard Carbide End Mills for General Milling Applications","Short Description":"Standard Carbide End Mills for General Milling Applications","Cutting Direction":"RH","Helix Direction":"RH","Length of Cut - Metric (Lc)":["2","3","4","5","6","7","8","9","10","12","14","16"],"Corner Radius - Metric (R)":["0.5","0.75","1","1.25","1.5","1.75","2","2.25","2.5","3","3.5","4","4.5","5","5.5","6"],"Overall Length - Metric (L)":["39","51","64"],"Shank Diameter - Metric (d)":["3","4","5","6","8","10","11","12"],"Cutting Diameter Tolerance - Metric":"+0 / -0.050","Diameter - Metric (D)":["1","1.5","2","2.5","3","3.5","4","4.5","5","6","7","8","9","10","11","12"],"Diameter-Sizes":"1/32\" - 0.75\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"1.5\" - 3\"","Shank-Sizes":"3mm - 0.75\"","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%20412BN/End_Mills_-_End_Mill_-_Carbide_-_List_412BN_-_Standard_Ball_End_-_Catalog"],"Friendly Name":"412BN"}

{"Number of Flutes":"4","Corner Radius - Inch (R)":["0.015625","0.023437","0.03125","0.039062","0.046875","0.054687","0.0625","0.070312","0.078125","0.09375","0.109375","0.125","0.15625","0.1875","0.21875","0.25","0.3125","0.375"],"Diameter - Inch (D)":["0.03125","0.046875","0.0625","0.078125","0.09375","0.109375","0.125","0.140625","0.15625","0.1875","0.21875","0.25","0.3125","0.375","0.4375","0.5","0.625","0.75"],"Cutting Diameter Tolerance - Inch":"+0 / -0.002","Diameter - Fractional Size (D)":["1/32","3/64","1/16","5/64","3/32","7/64","1/8","9/64","5/32","3/16","7/32","1/4","5/16","3/8","7/16","1/2","5/8","3/4"],"Shank Diameter - Inch (d)":["0.125","0.1875","0.25","0.3125","0.375","0.4375","0.5","0.625","0.75"],"Length of Cut - Inch (Lc)":["0.078125","0.09375","0.125","0.15625","0.1875","0.21875","0.25","0.28125","0.3125","0.375","0.4375","0.5","0.625","0.75","1"],"Overall Length - Inch (L)":["1.5","2","2.5","3"],"Helix Angle - Degree":"30","Web Literature 4":"800388CA","Product Overview":"4 Flute, Stub Length, Ball End","Stainless Steels : 300":"M; Good","Stainless Steels : 400":"M; Good","Brand":"OSG","End Cut Type":"Ball Nose","Web Literature 1":"8002024CA-EM,315|8002024CA-EMT,168","Notes":"Other coatings available upon request.","Surface Treatment":["BRIGHT","TiAlN","TiCN"],"Units":["Inch","Metric"],"Substrate":"Carbide","Hardened Steels : 35 HRC":"H; Good","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":"Center Cutting","Cast Iron":"K; Good","Hardened Steels : 45-50 HRC":"H; Good","Alloy Steels : 4140; 4340":"P; Good","Die Steels":"P; Good","High Carbon Steel : 1065":"P; Good","Low Carbon Steel : 1010; 1018":"P; Good","Medium Carbon Steel : 1035; 1045":"P; Good","View Catalog Page":"Here","View Speed and Feed Page":"Here","Aluminum : Casting":"N; Good","Weldon Flat":"No","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Good","Mill Type":"Single End","Length of Cut - Specification":["REGULAR","STUB"],"List Name":"STANDARD CARBIDE BN","Full Description":"Standard Carbide End Mills for General Milling Applications","Short Description":"Standard Carbide End Mills for General Milling Applications","Cutting Direction":"RH","Helix Direction":"RH","Length of Cut - Metric (Lc)":["2","3","4","5","6","7","8","9","10","12","14","16"],"Corner Radius - Metric (R)":["0.5","0.75","1","1.25","1.5","1.75","2","2.25","2.5","3","3.5","4","4.5","5","5.5","6"],"Overall Length - Metric (L)":["39","51","64"],"Shank Diameter - Metric (d)":["3","4","5","6","8","10","11","12"],"Cutting Diameter Tolerance - Metric":"+0 / -0.050","Diameter - Metric (D)":["1","1.5","2","2.5","3","3.5","4","4.5","5","6","7","8","9","10","11","12"],"Diameter-Sizes":"1/32\" - 0.75\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"1.5\" - 3\"","Shank-Sizes":"3mm - 0.75\"","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%20414BN/End_Mills_-_End_Mill_-_Carbide_-_List_414BN_-_Standard_Ball_End_-_Catalog"],"Friendly Name":"414BN"}

{"Number of Flutes":"4","Corner Radius - Inch (R)":["0.015625","0.023437","0.03125","0.039062","0.046875","0.054687","0.0625","0.070312","0.078125","0.09375","0.109375","0.125","0.15625","0.1875","0.21875","0.25"],"Diameter - Inch (D)":["0.03125","0.046875","0.0625","0.078125","0.09375","0.109375","0.125","0.140625","0.15625","0.1875","0.21875","0.25","0.3125","0.375","0.4375","0.5"],"Cutting Diameter Tolerance - Inch":"+0 / -0.002","Diameter - Fractional Size (D)":["1/32","3/64","1/16","5/64","3/32","7/64","1/8","9/64","5/32","3/16","7/32","1/4","5/16","3/8","7/16","1/2"],"Shank Diameter - Inch (d)":["0.125","0.1875","0.25","0.3125","0.375","0.4375","0.5"],"Length of Cut - Inch (Lc)":["0.078125","0.09375","0.125","0.15625","0.1875","0.21875","0.25","0.28125","0.3125","0.375","0.5","0.5625","0.625"],"Overall Length - Inch (L)":["1.5","2","2.5","2.75","3"],"Helix Angle - Degree":"30","Web Literature 4":"800388CA","Product Overview":"4 Flute, Stub Length, Double End, Ball End","Stainless Steels : 300":"M; Good","Stainless Steels : 400":"M; Good","Brand":"OSG","End Cut Type":"Ball Nose","Web Literature 1":"8002024CA-EM,318|8002024CA-EMT,168","Surface Treatment":["BRIGHT","TiAlN"],"Units":"Inch","Substrate":"Carbide","Hardened Steels : 35 HRC":"H; Good","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":"Center Cutting","Cast Iron":"K; Good","Hardened Steels : 45-50 HRC":"H; Good","Alloy Steels : 4140; 4340":"P; Good","Mill Type":"Double End","Die Steels":"P; Good","High Carbon Steel : 1065":"P; Good","Low Carbon Steel : 1010; 1018":"P; Good","View Catalog Page":"Here","View Speed and Feed Page":"Here","Aluminum : Casting":"N; Good","Weldon Flat":"No","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Good","Medium Carbon Steel : 1035; 1045":"P; Good","Length of Cut - Specification":["REGULAR","STUB"],"List Name":"STANDARD CARBIDE DOUBLE END BN","Full Description":"Standard Carbide End Mills for General Milling Applications","Short Description":"Standard Carbide End Mills for General Milling Applications","Cutting Direction":"RH","Helix Direction":"RH","Diameter-Sizes":"1/32\" - 0.5\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"1.5\" - 3\"","Shank-Sizes":"0.125\" - 0.5\"","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%20424BN/End_Mills_-_End_Mill_-_Carbide_-_List_424BN_-_Standard_Double_End_-_Catalog"],"Friendly Name":"424BN"}

{"Overall Length - Inch (L)":["3.25","4","3.75","4.625","3.875","5.25","4.5","6.5","7.75","9.75"],"Number of Flutes":["4","6","8"],"Corner Radius - Inch (R)":["0.25","0.3125","0.375","0.5","0.625","0.75","1"],"Diameter - Fractional Size (D)":["1/2","5/8","3/4","1","1-1/4","1-1/2","2"],"Diameter - Inch (D)":["0.5","0.625","0.75","1","1.25","1.5","2"],"Helix Angle - Degree":"30","Length of Cut - Inch (Lc)":["1.25","2","1.625","2.5","3","4","6"],"Web Literature 4":"800388CA","Shank Diameter - Inch (d)":["0.5","0.625","0.75","1","1.25","2"],"Stainless Steels : 300":"M; Good","Substrate":"HSS-CO","Stainless Steels : 400":"M; Good","Brand":"OSG","End Cut Type":"Ball Nose","Web Literature 1":"8002024CA-EM,324|8002024CA-EMT,171","Surface Treatment":"BRIGHT","Notes":"Other coatings available upon request. 2\" diameter shanks have combination drive.","Units":"Inch","Hardened Steels : 35 HRC":"H; Good","Cutting Type":"Center Cutting","Cast Iron":"K; Good","List Name":"COBALT HSS EX-REB","Full Description":"Cobalt-HSS Roughing Cut End Mills for Ferrous and Non-Ferrous Materials","Short Description":"Cobalt-HSS Roughing Cut End Mills for Ferrous and Non-Ferrous Materials","Alloy Steels : 4140; 4340":"P; Good","Die Steels":"P; Good","High Carbon Steel : 1065":"P; Good","Stainless Steels : 17-4PH":"M; Good","Low Carbon Steel : 1010; 1018":"P; Good","View Catalog Page":"Here","View Speed and Feed Page":"Here","Aluminum : Casting":"N; Good","Product Overview":"Multiple Flute, HSS-Co, Regular Pitch, Ball End, Roughing Cut","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Good","Medium Carbon Steel : 1035; 1045":"P; Good","Weldon Flat":"Yes","Mill Type":"Single End","Length of Cut - Specification":["REGULAR","LONG","STUB"],"Cutting Direction":"RH","Helix Direction":"RH","Type (feature)":"Roughing","Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"1/2\" - 2\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"3.25\" - 9.75\"","Shank-Sizes":"0.5\" - 2\"","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%20440/End_Mills_-_End_Mill_-_Roughing_Cut_-_List_440_-_Roughing_End_Mills_-_Catalog"],"Friendly Name":"440"}

{"Number of Flutes":"2","Corner Radius - Inch (R)":["0.03125","0.046875","0.0625","0.09375","0.125","0.15625","0.1875","0.25"],"Neck Diameter Max - Inch (d1 Max)":["0.0555","0.0833","0.111","0.1856","0.2475","0.3094","0.3712","0.495"],"Neck Diameter Min - Inch (d1 Min)":["0.0555","0.0833","0.111","0.1434","0.1912","0.2391","0.2868","0.3825"],"Neck Length - Inch (L1)":["0.3125","0.4688","0.625","0.9375","1.25","1.5625","1.875","2.5"],"Diameter - Inch (D)":["0.0625","0.09375","0.125","0.1875","0.25","0.3125","0.375","0.5"],"Type":["1","2"],"Diameter - Fractional Size (D)":["1/16","3/32","1/8","3/16","1/4","5/16","3/8","1/2"],"Product Overview":"2 Flute, Ball End, Stub Length, Sphere Type, WXS","Length of Cut - Inch (Lc)":["0.0442","0.0663","0.0884","0.1326","0.1768","0.221","0.2652","0.3536"],"Shank Diameter - Inch (d)":["0.25","0.3125","0.375","0.5"],"Helix Angle - Degree":"30","Overall Length - Inch (L)":["2.5","2.75","3.25","3.5","4","4.25","4.5"],"Web Literature 4":"800388CA","Feature 2":"High Precision geometry - All corner radius & ball mills have +/-5um radius tolerance","Stainless Steels : 300":"M; Good","Feature 3":"High strength core diameter","Benefit 4":"Higher coating oxidation temp & hardness dramatically improve wear resistance.","Brand":"EXOCARB","Stainless Steels : 400":"M; Good","Web Literature 1":"8002024CA-EM,278|8002024CA-EMT,148","End Cut Type":"Ball Nose","Hardened Steels : 35 HRC":"H; Best","Hardened Steels : 35-45 HRC":"H; Best","Alloy Steels : 4140; 4340":"P; Best","Hardened Steels : 45-50 HRC":"H; Best","Units":"Inch","Substrate":"Carbide","Hardened Steels : 50-70 HRC":"H; Best","Die Steels":"P; Best","Cast Iron":"K; Best","High Carbon Steel : 1065":"P; Best","Cutting Type":"Center Cutting","Low Carbon Steel : 1010; 1018":"P; Best","Medium Carbon Steel : 1035; 1045":"P; Best","Shank Tolerance":"h6","Benefit 2":"High accuracy all but eliminates need for benching and rework for mold makers.","Stainless Steels : 17-4PH":"M; Good","View Catalog Page":"Here","View Speed and Feed Page":"Here","Weldon Flat":"No","Coolant Thru":"No","Surface Treatment":"WXS","Feature 4":"WXS coating has a +1300 Celsius Oxidation Temp. & +3500Hv in hardness","List Name":"WXS-EQD","Mill Type":"Single End","Full Description":"Premium High Performance Carbide End Mills for Hardened Steels","Short Description":"Premium High Performance Carbide End Mills for Hardened Steels","Type (feature)":"Sphere","Cutting Direction":"RH","Length of Cut - Specification":"STUB","Benefit 1":"The hardest most wear resistant carbide possible for incredible wear resistance.","Helix Direction":"RH","Radius Tolerance - Inch":["+/- 0.0004","+/- 0.0006"],"Benefit 3":"Tools utilize thicker core diameters for the ultimate in strength and rigidity.","Feature 1":"Ultra-fine micrograin carbide","Neck Taper Angle - Degree (α)":"1.5","Diameter-Sizes":"1/16\" - 0.5\"","Flute-Sizes":"-","Neck-Sizes":"0.3125\" - 2.5\"","Taper-Sizes":"-","Overall-Sizes":"2.5\" - 4.5\"","Shank-Sizes":"0.25\" - 0.5\"","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%204413/End_Mills_-_End_Mill_-_EXOCARB_WXS_-_List_4413_-_Catalog"],"Friendly Name":"4413"}

{"Number of Flutes":"2","Corner Radius - Metric (R)":["0.5","1","1.5","2","3","4","5","6","2.5"],"Neck Diameter Max - Metric (d1 Max)":["0.85","1.7","2.7","3.7","5.9","7.9","9.9","11.9","4.4"],"Neck Diameter Min - Metric (d1 Min)":["0.85","1.7","2.7","3.7","4.6","6.2","7.7","9.2","4.4"],"Overall Length - Metric (L)":["60","70","90","100","110","80"],"Shank Diameter - Metric (d)":["6","8","10","12"],"Type":["1","2"],"Product Overview":"2 Flute, Ball End, Stub Length, Sphere Type, WXS","Neck Length - Metric (L1)":["5","10","15","20","30","40","50","60","25"],"Diameter - Metric (D)":["1","2","3","4","6","8","10","12","5"],"Helix Angle - Degree":"30","Length of Cut - Metric (Lc)":["0.7","1.5","2.3","3","4","5.4","6.7","8.1","3.5"],"Web Literature 4":"800388CA","Feature 2":"High Precision geometry - All corner radius & ball mills have +/-5um radius tolerance","Stainless Steels : 300":"M; Good","Feature 3":"High strength core diameter","Benefit 4":"Higher coating oxidation temp & hardness dramatically improve wear resistance.","Brand":"EXOCARB","Stainless Steels : 400":"M; Good","Web Video 2":"https://youtu.be/dNdGq78-DvA","Web Literature 1":"8002024CA-EM,279|8002024CA-EMT,149","Web Video 1":"https://youtu.be/gJImj11Ubbg","End Cut Type":"Ball Nose","Hardened Steels : 35 HRC":"H; Best","Web Literature 2":"800304CA","Hardened Steels : 35-45 HRC":"H; Best","Alloy Steels : 4140; 4340":"P; Best","Hardened Steels : 45-50 HRC":"H; Best","Substrate":"Carbide","Hardened Steels : 50-70 HRC":"H; Best","Die Steels":"P; Best","Cast Iron":"K; Best","High Carbon Steel : 1065":"P; Best","Cutting Type":"Center Cutting","Low Carbon Steel : 1010; 1018":"P; Best","Medium Carbon Steel : 1035; 1045":"P; Best","Shank Tolerance":"h6","Benefit 2":"High accuracy all but eliminates need for benching and rework for mold makers.","Stainless Steels : 17-4PH":"M; Good","View Catalog Page":"Here","View Speed and Feed Page":"Here","Units":"Metric","Weldon Flat":"No","Coolant Thru":"No","Surface Treatment":"WXS","Feature 4":"WXS coating has a +1300 Celsius Oxidation Temp. & +3500Hv in hardness","List Name":"WXS-EQD","Mill Type":"Single End","Full Description":"Premium High Performance Carbide End Mills for Hardened Steels","Short Description":"Premium High Performance Carbide End Mills for Hardened Steels","Type (feature)":"Sphere","Cutting Direction":"RH","Length of Cut - Specification":"STUB","Benefit 1":"The hardest most wear resistant carbide possible for incredible wear resistance.","Helix Direction":"RH","Benefit 3":"Tools utilize thicker core diameters for the ultimate in strength and rigidity.","Radius Tolerance - Metric":["+/- 0.010","+/- 0.015"],"Feature 1":"Ultra-fine micrograin carbide","Neck Taper Angle - Degree (α)":"1.5","Diameter-Sizes":"1mm - 12mm","Flute-Sizes":"-","Neck-Sizes":"5mm - 60mm","Taper-Sizes":"-","Overall-Sizes":"60mm - 110mm","Shank-Sizes":"6mm - 12mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%204513/End_Mills_-_End_Mill_-_EXOCARB_WXS_-_List_4513_-_Catalog"],"Friendly Name":"4513"}

{"Length of Cut - Metric (Lc)":["8","12","10","25","20","16"],"Number of Flutes":"4","Corner Radius - Metric (R)":["0.5","0.75","1","1.25"],"Overall Length - Metric (L)":["45","55","50"],"Shank Diameter - Metric (d)":["4"],"Cut Incline Angle - Degree (α)":["0.5","1.5","2","1","0.75"],"Helix Angle - Degree":"25","Taper Diameter - Metric (Ds)":["1.13","1.39","1.8","1.82","1.9","2.09","2.29","2.42","2.5","2.63","2.84","2.58","3","3.33","3.27","3.74"],"Diameter - Metric (D)":["1","1.5","2","2.5"],"Product Overview":"4 Flute, Ball End, Tapered, Rib Processing, WXS","Web Literature 4":"800388CA","Feature 2":"High Precision geometry - All corner radius & ball mills have +/-5um radius tolerance","Stainless Steels : 300":"M; Good","Feature 3":"High strength core diameter","Benefit 4":"Higher coating oxidation temp & hardness dramatically improve wear resistance.","Brand":"EXOCARB","Stainless Steels : 400":"M; Good","Length of Cut - Specification":["EXTRA LONG","LONG"],"Web Video 2":"https://youtu.be/dNdGq78-DvA","Web Literature 1":"8002024CA-EM,280|8002024CA-EMT,150","Web Video 1":"https://youtu.be/gJImj11Ubbg","End Cut Type":"Ball Nose","Hardened Steels : 35 HRC":"H; Best","Web Literature 2":"800304CA","Hardened Steels : 35-45 HRC":"H; Best","Alloy Steels : 4140; 4340":"P; Best","Hardened Steels : 45-50 HRC":"H; Best","Substrate":"Carbide","Die Steels":"P; Best","Cast Iron":"K; Best","High Carbon Steel : 1065":"P; Best","Cutting Type":"Center Cutting","Low Carbon Steel : 1010; 1018":"P; Best","Hardened Steels : 50-70 HRC":"H; Good","Medium Carbon Steel : 1035; 1045":"P; Best","Shank Tolerance":"h6","Benefit 2":"High accuracy all but eliminates need for benching and rework for mold makers.","Stainless Steels : 17-4PH":"M; Good","View Catalog Page":"Here","View Speed and Feed Page":"Here","Units":"Metric","Weldon Flat":"No","Coolant Thru":"No","Surface Treatment":"WXS","Feature 4":"WXS coating - +1300 Celsius Oxidation Temp. & +3500Hv in hardness","List Name":"WXS-RB-TPB","Mill Type":"Single End","Full Description":"Premium High Performance Carbide End Mills for Hardened Steels","Short Description":"Premium High Performance Carbide End Mills for Hardened Steels","Cutting Direction":"RH","Type (feature)":"Tapered","Benefit 1":"The hardest most wear resistant carbide possible for incredible wear resistance.","Helix Direction":"RH","Cut Incline Angle Tolerance - Degree":"+/- 0°5'","Benefit 3":"Tools utilize thicker core diameters for the ultimate in strength and rigidity.","Feature 1":"Ultra-fine micrograin carbide","Diameter-Sizes":"1mm - 2.5mm","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"45mm - 55mm","Shank-Sizes":"4mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%204581/End_Mills_-_End_Mill_-_EXOCARB_WXS_-_List_4581_-_Catalog"],"Friendly Name":"4581"}

{"Number of Flutes":"3","Corner Radius - Inch (R)":["0.046875","0.0625","0.09375","0.125","0.15625","0.1875","0.25"],"Neck Diameter - Inch (d1)":["0.0905","0.1181","0.1811"],"Effective Neck Length by Incline Angle 0.5° - Inch":["0.192","0.386","0.256","0.515","0.384","0.772"],"Neck Length - Inch (L1)":["0.4961","0.685","0.4921","0.7402","0.5039","0.878"],"Effective Neck Length by Incline Angle 1.5° - Inch":["0.203","0.411","0.27","0.547","0.406","0.821"],"Effective Neck Length by Incline Angle 1° - Inch":["0.197","0.398","0.263","0.531","0.395","0.796"],"Effective Neck Length by Incline Angle 2° - Inch":["0.209","0.424","0.278","0.566","0.417","0.849"],"Diameter - Inch (D)":["0.09375","0.125","0.1875","0.25","0.3125","0.375","0.5"],"Effective Neck Length by Incline Angle 3° - Inch":["0.222","0.455","0.296","0.607","0.444"],"Type":["1","2"],"Interference Angle - Degree (α)":["10.33","7.3819999999999997","8.4960000000000004","5.399","4.7679999999999998","2.4980000000000002"],"Non-Taper Neck Length - Inch (L2)":["0.1875","0.375","0.25","0.5","0.75"],"Length of Cut - Inch (Lc)":["0.09375","0.125","0.1875","0.25","0.3125","0.5625","0.75"],"Diameter - Fractional Size (D)":["3/32","1/8","3/16","1/4","5/16","3/8","1/2"],"Shank Diameter - Inch (d)":["0.25","0.3125","0.375","0.5"],"Overall Length - Inch (L)":["2","2.5","3","3.5","4"],"Helix Angle - Degree":"30","Feature 2":"3D Negative Robust Geometry","Web Literature 4":"800388CA","Surface Treatment":"DUROREY","Benefit 1":"enables superior heat resistance and high toughness optimized for high-hardness steel milling!","Stainless Steels : 300":"M; Good","Brand":"EXOCARB","Benefit 2":"Optimized for additive manufacturing, even applicable to large depth of cut","Web Video 1":"https://youtu.be/DaV7W29Hi-w","List Name":"AM-EBT","Web Literature 1":"8002024CA-EM,281|8002024CA-EMT,151","End Cut Type":"Ball Nose","Web Video 3":"https://youtu.be/rMW62-Jz2Ho","Web Video 2":"https://youtu.be/UIJdxi9oadc","Web Literature 2":"800316CA-V2","Hardened Steels : 35-45 HRC":"H; Best","Hardened Steels : 45-50 HRC":"H; Best","Units":"Inch","Substrate":"Carbide","Full Description":"Carbide End Mills Designed for Additive Manufacturing","Short Description":"Carbide End Mills Designed for Additive Manufacturing","Product Overview":"Carbide, Durorey Coating, Ball End, Inch Sizes","Cutting Type":"Center Cutting","Hardened Steels : 50-70 HRC":"H; Good","Shank Tolerance":"h4","Stainless Steels : 17-4PH":"M; Good","View Catalog Page":"Here","View Speed and Feed Page":"Here","Stainless Steels : 400":"M; Good","Feature 1":"Newly developed DUROREY coating","Weldon Flat":"No","Coolant Thru":"No","Mill Type":"Single End","Cutting Direction":"RH","Length of Cut - Specification":"STUB","Helix Direction":"RH","Cutting Diameter Tolerance - Inch":"+/- 0.0012","Nickel Alloy : Inconel":"S; Best","Titanium : 6AL4V (30HRC)":"S; Best","Diameter-Sizes":"3/32\" - 0.5\"","Flute-Sizes":"-","Neck-Sizes":"0.4921\" - 0.878\"","Taper-Sizes":"-","Overall-Sizes":"2\" - 4\"","Shank-Sizes":"0.25\" - 0.5\"","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%204630/End_Mills_-_End_Mill_-_EXOCARB_AM-EBT_-_List_4630_-_Catalog_-_Type_2","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%204630/End_Mills_-_End_Mill_-_EXOCARB_AM-EBT_-_List_4630_-_Catalog_-_Type_1"],"Friendly Name":"4630"}

{"Number of Flutes":"4","Overall Length - Inch (L)":["5","2.25","3","4"],"Shank Diameter - Inch (d)":["1","0.125","0.1875","0.25","0.3125","0.375","0.4375","0.5","0.625","0.75"],"Corner Radius - Inch (R)":["0.5","0.0625","0.09375","0.125","0.15625","0.1875","0.21875","0.25","0.3125","0.375"],"Cutting Diameter Tolerance - Inch":"+0 / -0.002","Diameter - Fractional Size (D)":["1","1/8","3/16","1/4","5/16","3/8","7/16","1/2","5/8","3/4"],"Diameter - Inch (D)":["1","0.125","0.1875","0.25","0.3125","0.375","0.4375","0.5","0.625","0.75"],"Helix Angle - Degree":"30","Length of Cut - Inch (Lc)":["2.25","0.75","1.125","2"],"Product Overview":"4 Flute, Long Length, Ball End","Web Literature 4":"800388CA","Stainless Steels : 300":"M; Good","Brand":"OSG","Web Literature 1":"8002024CA-EM,316|8002024CA-EMT,168","End Cut Type":"Ball Nose","Notes":"Other coatings available upon request.","Surface Treatment":["BRIGHT","TiAlN","TiCN"],"Units":["Inch","Metric"],"Substrate":"Carbide","Hardened Steels : 35 HRC":"H; Good","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":"Center Cutting","Cast Iron":"K; Good","Hardened Steels : 45-50 HRC":"H; Good","Alloy Steels : 4140; 4340":"P; Good","Die Steels":"P; Good","High Carbon Steel : 1065":"P; Good","Low Carbon Steel : 1010; 1018":"P; Good","View Catalog Page":"Here","View Speed and Feed Page":"Here","Stainless Steels : 400":"M; Good","Aluminum : Casting":"N; Good","Weldon Flat":"No","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Good","Medium Carbon Steel : 1035; 1045":"P; Good","Mill Type":"Single End","Length of Cut - Specification":["REGULAR","EXTRA LONG","LONG"],"List Name":"STANDARD CARBIDE BN","Full Description":"Standard Carbide End Mills for General Milling Applications","Short Description":"Standard Carbide End Mills for General Milling Applications","Cutting Direction":"RH","Helix Direction":"RH","Length of Cut - Metric (Lc)":["19","25","28","29","32","51","57"],"Diameter - Metric (D)":["3","4","5","6","8","10","12","14","16","18","20","25"],"Corner Radius - Metric (R)":["1.5","2","2.5","3","4","5","6","7","8","9","10","12.5"],"Shank Diameter - Metric (d)":["3","4","5","6","8","10","12","14","16","18","20","25"],"Overall Length - Metric (L)":["57","64","76","102","127"],"Cutting Diameter Tolerance - Metric":"+0 / -0.050","Diameter-Sizes":"3mm - 1\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"57mm - 127mm","Shank-Sizes":"3mm - 1\"","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%20464BN/End_Mills_-_End_Mill_-_Carbide_-_List_464BN_-_Standard_Ball_End_-_Catalog"],"Friendly Name":"464BN"}

{"Number of Flutes":"3","Length of Cut - Metric (Lc)":["2","3","4","5","9","12","15","18","24","30"],"Neck Diameter - Metric (d1)":["1.95","2.85","3.85","4.85"],"Corner Radius - Metric (R)":["1","1.5","2","2.5","3","4","5","6","8","10"],"Effective Neck Length by Incline Angle 0.5° - Metric":["4.19","8.33","6.44","12.64","8.49","16.76","10.54","20.87"],"Effective Neck Length by Incline Angle 1.5° - Metric":["4.42","8.86","6.79","13.44","8.96","17.82","11.12"],"Effective Neck Length by Incline Angle 1° - Metric":["4.33","5.58","6.61","13.03","8.71","17.27","10.82","21.52"],"Effective Neck Length by Incline Angle 2° - Metric":["4.55","9.15","7","13.89","9.22","18.42","11.45"],"Effective Neck Length by Incline Angle 3° - Metric":["4.85","9.82","7.45","14.91","9.81","19.76"],"Overall Length - Metric (L)":["60","70","80","90","105","110"],"Shank Diameter - Metric (d)":["6","8","10","12","16","20"],"Type":["1","2"],"Neck Length - Metric (L1)":["11.9","15.9","11.8","17.8","12","20","12.1","22.1"],"Interference Angle - Degree (α)":["10.64","7.79","8.15","5.22","5.65","3.17","2.95","1.46"],"Non-Taper Neck Length - Metric (L2)":["4","8","6","12","16","10","20"],"Helix Angle - Degree":"30","Diameter - Metric (D)":["2","3","4","5","6","8","10","12","16","20"],"Web Literature 4":"800388CA","Feature 2":"3D Negative Robust Geometry","Surface Treatment":"DUROREY","Benefit 1":"enables superior heat resistance and high toughness optimized for high-hardness steel milling!","Stainless Steels : 300":"M; Good","Stainless Steels : 400":"M; Good","Brand":"EXOCARB","Benefit 2":"Optomized for additive manufacturing, even applicable to large depth of cut","Web Video 1":"https://youtu.be/DaV7W29Hi-w","List Name":"AM-EBT","Web Literature 1":"8002024CA-EM,282|8002024CA-EMT,151","End Cut Type":"Ball Nose","Web Video 3":"https://youtu.be/rMW62-Jz2Ho","Web Video 2":"https://youtu.be/UIJdxi9oadc","Hardened Steels : 35-45 HRC":"H; Best","Web Literature 2":"800316CA-V2","Substrate":"Carbide","Hardened Steels : 45-50 HRC":"H; Best","Full Description":"Carbide End Mills Designed for Additive Manufacturing","Short Description":"Carbide End Mills Designed for Additive Manufacturing","Product Overview":"Carbide, Durorey Coating, Ball End, Metric Sizes","Cutting Type":"Center Cutting","Hardened Steels : 50-70 HRC":"H; Good","Shank Tolerance":"h4","Stainless Steels : 17-4PH":"M; Good","View Catalog Page":"Here","View Speed and Feed Page":"Here","Units":"Metric","Feature 1":"Newly developed DUROREY coating","Weldon Flat":"No","Coolant Thru":"No","Mill Type":"Single End","Cutting Direction":"RH","Length of Cut - Specification":"STUB","Helix Direction":"RH","Cutting Diameter Tolerance - Metric":"+/- 0.030","Nickel Alloy : Inconel":"S; Best","Titanium : 6AL4V (30HRC)":"S; Best","Diameter-Sizes":"2mm - 20mm","Flute-Sizes":"-","Neck-Sizes":"11.8mm - 22.1mm","Taper-Sizes":"-","Overall-Sizes":"60mm - 110mm","Shank-Sizes":"6mm - 20mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%204730/End_Mills_-_End_Mill_-_EXOCARB_AM-EBT_-_List_4730_-_Catalog_-_Type_2","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%204730/End_Mills_-_End_Mill_-_EXOCARB_AM-EBT_-_List_4730_-_Catalog_-_Type_1"],"Friendly Name":"4730"}

{"Number of Flutes":"4","Overall Length - Inch (L)":["6","3","4"],"Shank Diameter - Inch (d)":["1","0.125","0.1875","0.25","0.3125","0.375","0.4375","0.5","0.625","0.75"],"Corner Radius - Inch (R)":["0.5","0.0625","0.09375","0.125","0.15625","0.1875","0.21875","0.25","0.3125","0.375"],"Cutting Diameter Tolerance - Inch":"+0 / -0.002","Diameter - Fractional Size (D)":["1","1/8","3/16","1/4","5/16","3/8","7/16","1/2","5/8","3/4"],"Diameter - Inch (D)":["1","0.125","0.1875","0.25","0.3125","0.375","0.4375","0.5","0.625","0.75"],"Helix Angle - Degree":"30","Length of Cut - Inch (Lc)":["3","1","1.125","1.5","1.625","1.75"],"Product Overview":"4 Flute, Extra Long Length","Web Literature 4":"800388CA","Stainless Steels : 300":"M; Good","Brand":"OSG","Web Literature 1":"8002024CA-EM,317|8002024CA-EMT,168","End Cut Type":"Ball Nose","Notes":"Other coatings available upon request.","Surface Treatment":["BRIGHT","TiAlN"],"Units":["Inch","Metric"],"Substrate":"Carbide","Hardened Steels : 35 HRC":"H; Good","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":"Center Cutting","Cast Iron":"K; Good","Alloy Steels : 4140; 4340":"P; Good","Die Steels":"P; Good","High Carbon Steel : 1065":"P; Good","Low Carbon Steel : 1010; 1018":"P; Good","View Catalog Page":"Here","View Speed and Feed Page":"Here","Stainless Steels : 400":"M; Good","Aluminum : Casting":"N; Good","Weldon Flat":"No","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Good","Medium Carbon Steel : 1035; 1045":"P; Good","Mill Type":"Single End","Length of Cut - Specification":["REGULAR","EXTRA LONG","LONG"],"List Name":"STANDARD CARBIDE BN","Full Description":"Standard Carbide End Mills for General Milling Applications","Short Description":"Standard Carbide End Mills for General Milling Applications","Cutting Direction":"RH","Helix Direction":"RH","Aramid Fiber (AFRP)":"-","Benefit 1":"-","Benefit 2":"-","Benefit 3":"-","Benefit 4":"-","Bottom Edge Radius - Metric (R2)":"-","Brass, Bronze":"-","Carbon Fiber (CFRP)":"-","Carbon Fiber / Al / Ti / CRES Stack":"-","Carbon Fiber / Aluminum Stack":"-","Carbon Fiber / Titanium Stack":"-","Carbon/Carbon":"-","Coating Thickness (µm)":"-","Cobalt-Chrome":"-","Compatible Machine":"-","Compression Length - Inch (L2)":"-","Contour Milling":"-","Corner Chamfer - Inch (C)":"-","Corner Chamfer - Metric (C)":"-","Corner Radius - Metric (R)":["1.5","2","2.5","3","4","5","6","7","8","9","10","12.5"],"Cut Incline Angle - Degree (α)":"-","Cut Incline Angle Tolerance - Degree":"-","Cutting Diameter Tolerance - Metric":"+0 / -0.050","Deep Side Milling":"-","Diameter - Metric (D)":["3","4","5","6","8","10","12","14","16","18","20","25"],"Diameter at Center of Radius - Metric (dm)":"-","Edge Radius - Metric (R3)":"-","Effective Diameter - Inch (DCF)":"-","Effective Diameter - Metric (DCF)":"-","Effective Draft Angle - Degree (α)":"-","Effective Neck Length by Incline Angle 0.5° - Inch":"-","Effective Neck Length by Incline Angle 0.5° - Metric":"-","Effective Neck Length by Incline Angle 0° - Inch":"-","Effective Neck Length by Incline Angle 0° - Metric":"-","Effective Neck Length by Incline Angle 1.5° - Inch":"-","Effective Neck Length by Incline Angle 1.5° - Metric":"-","Effective Neck Length by Incline Angle 1° - Inch":"-","Effective Neck Length by Incline Angle 1° - Metric":"-","Effective Neck Length by Incline Angle 2.5° - Metric":"-","Effective Neck Length by Incline Angle 2° - Inch":"-","Effective Neck Length by Incline Angle 2° - Metric":"-","Effective Neck Length by Incline Angle 3° - Inch":"-","Effective Neck Length by Incline Angle 3° - Metric":"-","Effective Radius - Metric (rt)":"-","Feature 1":"-","Feature 2":"-","Feature 3":"-","Feature 4":"-","Form Tolerance - Metric":"-","Glass Ceramics":"-","Glass Fiber (GFRP)":"-","Graphite":"-","Hardened Steels : 45-50 HRC":"-","Hardened Steels : 50-70 HRC":"-","Helical Milling":"-","Honeycomb: AFRP":"-","Honeycomb: AI/AI":"-","Honeycomb: CFRP/AI":"-","Honeycomb: CFRP/Nomex":"-","Honeycomb: GFRP/Nomex":"-","Hybrid Ceramic / Composite":"-","Included Angle - Degree (α)":"-","Interference Angle - Degree (α)":"-","L/D Ratio":"-","Length of Cut - Metric (Lc)":["25","28","32","38","42","45","76"],"Length to Center of Radius - Metric (Lm)":"-","Magnesium":"-","Neck Diameter - Inch (d1)":"-","Neck Diameter - Metric (d1)":"-","Neck Diameter Max - Inch (d1 Max)":"-","Neck Diameter Max - Metric (d1 Max)":"-","Neck Diameter Min - Inch (d1 Min)":"-","Neck Diameter Min - Metric (d1 Min)":"-","Neck Draft Angle - Degree (ß)":"-","Neck Length - Inch (L1)":"-","Neck Length - Metric (L1)":"-","Neck Taper Angle - Degree (α)":"-","Nickel Alloy : Inconel":"-","Non-Taper Neck Length - Inch (L2)":"-","Non-Taper Neck Length - Metric (L2)":"-","Overall Length - Metric (L)":["76","102","153"],"PEEK":"-","Peripheral Edge Radius - Metric (R2)":"-","Plunging":"-","Radius Tolerance - Inch":"-","Radius Tolerance - Metric":"-","Ramping":"-","Shank Diameter - Metric (d)":["3","4","5","6","8","10","12","14","16","18","20","25"],"Shank Tolerance":"-","Side Milling":"-","Slotting":"-","Stainless Steels : 17-4PH":"-","Taper Angle Tolerance - Degree":"-","Taper Diameter - Metric (Ds)":"-","Taper per Side - Degree (α)":"-","Tilt Angle - Degree (α/2)":"-","Tip Radius - Metric (R1)":"-","Titanium":"-","Titanium : 6AL4V (30HRC)":"-","Trochoidal Milling":"-","Type":"-","Type (feature)":"-","Wax/PMMA":"-","Web Literature 2":"-","Web Literature 3":"-","Web Video 1":"-","Web Video 2":"-","Web Video 3":"-","Zirconia":"-","Diameter-Sizes":"3mm - 1\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"76mm - 153mm","Shank-Sizes":"3mm - 1\"","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%20484BN/End_Mills_-_End_Mill_-_Carbide_-_List_484BN_-_Standard_Ball_End_-_Catalog"],"Friendly Name":"484BN"}

{"Number of Flutes":"2","Corner Radius - Inch (R)":["0.0625","0.09375","0.125","0.15625","0.1875","0.25","0.28125","0.3125","0.375","0.4375","0.5","0.5625","0.625","0.75","0.21875"],"Diameter - Inch (D)":["0.125","0.1875","0.25","0.3125","0.375","0.5","0.5625","0.625","0.75","0.875","1","1.125","1.25","1.5","0.4375"],"Cutting Diameter Tolerance - Inch":"+0.0011 / -0","Diameter - Fractional Size (D)":["1/8","3/16","1/4","5/16","3/8","1/2","9/16","5/8","3/4","7/8","1","1-1/8","1-1/4","1-1/2","7/16"],"Product Overview":"2 Flute, HSS-Co, Regular Length, Ball End, Two Flute","Length of Cut - Inch (Lc)":["0.375","0.5","0.625","0.75","1.5","1","1.125","1.3125","1.375","1.625","1.875","2.25","2","3","2.5"],"Overall Length - Inch (L)":["2.3125","2.375","2.4375","2.5","3.25","3","3.125","3.3125","3.5","3.875","4.125","4.5","4.25","5.25","4.75","5","4"],"Helix Angle - Degree":"30","Shank Diameter - Inch (d)":["0.375","0.5","0.625","0.75","0.875","1","1.25"],"Web Literature 4":"800388CA","Stainless Steels : 300":"M; Good","Substrate":"HSS-CO","Brand":"OSG","Web Literature 1":"8002024CA-EM,321|8002024CA-EMT,170","End Cut Type":"Ball Nose","Notes":"Other coatings available upon request.","Surface Treatment":"BRIGHT","Units":"Inch","Hardened Steels : 35 HRC":"H; Good","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":"Center Cutting","Cast Iron":"K; Good","Low Carbon Steel : 1010; 1018":"P; Best","List Name":"COBALT HSS EBD","Medium Carbon Steel : 1035; 1045":"P; Best","Alloy Steels : 4140; 4340":"P; Good","Full Description":"High Performance Cobalt HSS End Mills for General Milling Applications","Short Description":"High Performance Cobalt HSS End Mills for General Milling Applications","Die Steels":"P; Good","Stainless Steels : 17-4PH":"M; Good","High Carbon Steel : 1065":"P; Good","View Catalog Page":"Here","View Speed and Feed Page":"Here","Stainless Steels : 400":"M; Good","Aluminum : Casting":"N; Good","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Good","Weldon Flat":"Yes","Mill Type":"Single End","Length of Cut - Specification":["REGULAR","LONG","STUB"],"Cutting Direction":"RH","Helix Direction":"RH","Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"1/8\" - 1.5\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"2.3125\" - 5.25\"","Shank-Sizes":"0.375\" - 1.25\"","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%20521/End_Mills_-_End_Mill_-_Single_End_Mills_-_List_521_-_Ball_End_-_Catalog"],"Friendly Name":"521"}

{"Overall Length - Inch (L)":["3.0625","3.125","3.75","4.5","5","5.875"],"Number of Flutes":"2","Corner Radius - Inch (R)":["0.0625","0.09375","0.125","0.15625","0.1875","0.25","0.3125","0.375","0.5","0.21875"],"Diameter - Inch (D)":["0.125","0.1875","0.25","0.3125","0.375","0.5","0.625","0.75","1","0.4375"],"Diameter - Fractional Size (D)":["1/8","3/16","1/4","5/16","3/8","1/2","5/8","3/4","1","7/16"],"Product Overview":"2 Flute, HSS-Co, Regular Length, Two Flute, Ball End","Length of Cut - Inch (Lc)":["0.375","0.4375","0.5","0.5625","0.8125","1.125","1.3125","1.625"],"Helix Angle - Degree":"30","Shank Diameter - Inch (d)":["0.375","0.5","0.625","0.75","1"],"Web Literature 4":"800388CA","Stainless Steels : 300":"M; Good","Substrate":"HSS-CO","Brand":"OSG","Web Literature 1":"8002024CA-EM,325|8002024CA-EMT,170","End Cut Type":"Ball Nose","Notes":"Other coatings available upon request.","Surface Treatment":"BRIGHT","Units":"Inch","Hardened Steels : 35 HRC":"H; Good","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":"Center Cutting","Cast Iron":"K; Good","Low Carbon Steel : 1010; 1018":"P; Best","List Name":"COBALT HSS DOUBLE END DDEB","Medium Carbon Steel : 1035; 1045":"P; Best","Alloy Steels : 4140; 4340":"P; Good","Mill Type":"Double End","Full Description":"High Performance Cobalt HSS End Mills for General Milling Applications","Short Description":"High Performance Cobalt HSS End Mills for General Milling Applications","Die Steels":"P; Good","Stainless Steels : 17-4PH":"M; Good","High Carbon Steel : 1065":"P; Good","View Catalog Page":"Here","View Speed and Feed Page":"Here","Stainless Steels : 400":"M; Good","Aluminum : Casting":"N; Good","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Good","Weldon Flat":"Yes","Length of Cut - Specification":["REGULAR","STUB"],"Cutting Direction":"RH","Helix Direction":"RH","Cutting Diameter Tolerance - Inch":["+0 / -0.0011","-0.0004 / -0.0015"],"Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"1/8\" - 1\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"3.0625\" - 5.875\"","Shank-Sizes":"0.375\" - 1\"","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%20523/End_Mills_-_End_Mill_-_Double_End_Mills_-_List_523_-_Catalog"],"Friendly Name":"523"}

{"Number of Flutes":"2","Corner Radius - Inch (R)":["0.0625","0.09375","0.125","0.15625","0.1875","0.25","0.3125","0.375","0.5","0.21875"],"Neck Length - Inch (L1)":["0.8125","1.125","1.5","1.75","2.25","2.75","3.375","5","1.875"],"Diameter - Inch (D)":["0.125","0.1875","0.25","0.3125","0.375","0.5","0.625","0.75","1","0.4375"],"Cutting Diameter Tolerance - Inch":"+0.0011 / -0","Diameter - Fractional Size (D)":["1/8","3/16","1/4","5/16","3/8","1/2","5/8","3/4","1","7/16"],"Product Overview":"2 Flute, HSS-Co, Regular Length, Ball End, Two Flute, Extension Type","Length of Cut - Inch (Lc)":["0.375","0.5","0.625","0.75","1","1.375","1.625","2.5"],"Overall Length - Inch (L)":["2.375","2.6875","3.0625","3.3125","4","4.625","5.375","7.25","3.6875"],"Helix Angle - Degree":"30","Shank Diameter - Inch (d)":["0.375","0.5","0.625","0.75","1"],"Web Literature 4":"800388CA","Stainless Steels : 300":"M; Good","Substrate":"HSS-CO","Brand":"OSG","Web Literature 1":"8002024CA-EM,322|8002024CA-EMT,170","End Cut Type":"Ball Nose","Notes":"Other coatings available upon request.","Surface Treatment":"BRIGHT","Units":"Inch","Hardened Steels : 35 HRC":"H; Good","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":"Center Cutting","Cast Iron":"K; Good","Low Carbon Steel : 1010; 1018":"P; Best","List Name":"COBALT HSS LS-EBD","Medium Carbon Steel : 1035; 1045":"P; Best","Alloy Steels : 4140; 4340":"P; Good","Full Description":"High Performance Cobalt HSS End Mills for General Milling Applications","Short Description":"High Performance Cobalt HSS End Mills for General Milling Applications","Die Steels":"P; Good","Stainless Steels : 17-4PH":"M; Good","High Carbon Steel : 1065":"P; Good","View Catalog Page":"Here","View Speed and Feed Page":"Here","Stainless Steels : 400":"M; Good","Aluminum : Casting":"N; Good","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Good","Weldon Flat":"Yes","Mill Type":"Single End","Type (feature)":"Reduced Neck","Length of Cut - Specification":"REGULAR","Cutting Direction":"RH","Helix Direction":"RH","Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"1/8\" - 1\"","Flute-Sizes":"-","Neck-Sizes":"0.8125\" - 5\"","Taper-Sizes":"-","Overall-Sizes":"2.375\" - 7.25\"","Shank-Sizes":"0.375\" - 1\"","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%20526/End_Mills_-_End_Mill_-_Single_End_Mills_-_List_526_-_Ball_End_-_Catalog"],"Friendly Name":"526"}

{"Number of Flutes":"4","Corner Radius - Inch (R)":["0.1875","0.25","0.3125","0.375","0.4375","0.5","0.625","0.75","0.21875"],"Cutting Diameter Tolerance - Inch":"+0.0011 / -0","Diameter - Inch (D)":["0.375","0.5","0.625","0.75","0.875","1","1.25","1.5","0.4375"],"Diameter - Fractional Size (D)":["3/8","1/2","5/8","3/4","7/8","1","1-1/4","1-1/2","7/16"],"Length of Cut - Inch (Lc)":["0.75","1.25","1.625","2.5","1.875","2"],"Helix Angle - Degree":"30","Overall Length - Inch (L)":["2.5","3.25","3.75","4.625","3.875","4.125","4.5"],"Shank Diameter - Inch (d)":["0.375","0.5","0.625","0.75","0.875","1","1.25"],"Product Overview":"4 Flute, HSS-Co, Regular Length, Ball End","Web Literature 4":"800388CA","Stainless Steels : 300":"M; Good","Substrate":"HSS-CO","Brand":"OSG","Web Literature 1":"8002024CA-EM,323|8002024CA-EMT,170","End Cut Type":"Ball Nose","Notes":"Other coatings available upon request.","Surface Treatment":"BRIGHT","Alloy Steels : 4140; 4340":"P; Best","Units":"Inch","Die Steels":"P; Best","Hardened Steels : 35 HRC":"H; Good","High Carbon Steel : 1065":"P; Best","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":"Center Cutting","Cast Iron":"K; Good","Low Carbon Steel : 1010; 1018":"P; Best","List Name":"COBALT HSS EBM","Medium Carbon Steel : 1035; 1045":"P; Best","Full Description":"High Performance Cobalt HSS End Mills for General Milling Applications","Short Description":"High Performance Cobalt HSS End Mills for General Milling Applications","Stainless Steels : 17-4PH":"M; Good","View Catalog Page":"Here","View Speed and Feed Page":"Here","Aluminum : 6061; 7075":"N; Good","Stainless Steels : 400":"M; Good","Aluminum : Casting":"N; Good","Coolant Thru":"No","Weldon Flat":"Yes","Mill Type":"Single End","Length of Cut - Specification":["REGULAR","LONG","STUB"],"Cutting Direction":"RH","Helix Direction":"RH","Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"3/8\" - 1.5\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"2.5\" - 4.625\"","Shank-Sizes":"0.375\" - 1.25\"","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%20544/End_Mills_-_End_Mill_-_Single_End_Multiple_Flute_-_List_544_-_Catalog"],"Friendly Name":"544"}

{"Number of Flutes":"2","Corner Radius - Inch (R)":["0.03125","0.046875","0.0625","0.078125","0.09375"],"Diameter - Inch (D)":["0.0625","0.09375","0.125","0.15625","0.1875"],"Diameter - Fractional Size (D)":["1/16","3/32","1/8","5/32","3/16"],"Product Overview":"2 Flute, HSS-Co, Stub Length, Miniature, Ball End","Shank Diameter - Inch (d)":["0.1875"],"Length of Cut - Inch (Lc)":["0.09375","0.140625","0.1875","0.234375","0.28125"],"Overall Length - Inch (L)":["2"],"Helix Angle - Degree":"30","Web Literature 4":"800388CA","Stainless Steels : 300":"M; Good","Substrate":"HSS-CO","Brand":"OSG","Web Literature 1":"8002024CA-EM,326","End Cut Type":"Ball Nose","Notes":"Other coatings available upon request.","Surface Treatment":"BRIGHT","Units":"Inch","Hardened Steels : 35 HRC":"H; Good","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":"Center Cutting","Cast Iron":"K; Good","Low Carbon Steel : 1010; 1018":"P; Best","List Name":"COBALT HSS DOUBLE END M-DDEB","Medium Carbon Steel : 1035; 1045":"P; Best","Alloy Steels : 4140; 4340":"P; Good","Mill Type":"Double End","Full Description":"High Performance Cobalt HSS End Mills for General Milling Applications","Short Description":"High Performance Cobalt HSS End Mills for General Milling Applications","Die Steels":"P; Good","High Carbon Steel : 1065":"P; Good","Stainless Steels : 17-4PH":"M; Good","View Catalog Page":"Here","Aluminum : 6061; 7075":"N; Good","Stainless Steels : 400":"M; Good","Aluminum : Casting":"N; Good","Weldon Flat":"No","Coolant Thru":"No","Cutting Direction":"RH","Length of Cut - Specification":"STUB","Helix Direction":"RH","Cutting Diameter Tolerance - Inch":["+0 / -0.0011","-0.0004 / -0.0015"],"Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"1/16\" - 0.1875\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"2\"","Shank-Sizes":"0.1875\"","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%20570/End_Mills_-_End_Mill_-_Double_End_Mills_-_List_570_-_Catalog"],"Friendly Name":"570"}

{"Number of Flutes":"2","Corner Radius - Inch (R)":["0.03125","0.046875","0.0625","0.078125","0.09375"],"Diameter - Inch (D)":["0.0625","0.09375","0.125","0.15625","0.1875"],"Diameter - Fractional Size (D)":["1/16","3/32","1/8","5/32","3/16"],"Product Overview":"2 Flute, HSS-Co, Regular Length, Miniature, Ball End","Shank Diameter - Inch (d)":["0.1875"],"Length of Cut - Inch (Lc)":["0.1875","0.28125","0.375","0.4375","0.5"],"Overall Length - Inch (L)":["2.25"],"Helix Angle - Degree":"30","Web Literature 4":"800388CA","Stainless Steels : 300":"M; Good","Substrate":"HSS-CO","Brand":"OSG","Web Literature 1":"8002024CA-EM,327","End Cut Type":"Ball Nose","Notes":"Other coatings available upon request.","Surface Treatment":"BRIGHT","Units":"Inch","Hardened Steels : 35 HRC":"H; Good","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":"Center Cutting","Cast Iron":"K; Good","Low Carbon Steel : 1010; 1018":"P; Best","List Name":"COBALT HSS DOUBLE END M-DDEB","Medium Carbon Steel : 1035; 1045":"P; Best","Alloy Steels : 4140; 4340":"P; Good","Mill Type":"Double End","Full Description":"High Performance Cobalt HSS End Mills for General Milling Applications","Short Description":"High Performance Cobalt HSS End Mills for General Milling Applications","Die Steels":"P; Good","High Carbon Steel : 1065":"P; Good","Stainless Steels : 17-4PH":"M; Good","View Catalog Page":"Here","Aluminum : 6061; 7075":"N; Good","Stainless Steels : 400":"M; Good","Aluminum : Casting":"N; Good","Weldon Flat":"No","Coolant Thru":"No","Length of Cut - Specification":"REGULAR","Cutting Direction":"RH","Helix Direction":"RH","Cutting Diameter Tolerance - Inch":["+0 / -0.0011","-0.0004 / -0.0015"],"Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"1/16\" - 0.1875\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"2.25\"","Shank-Sizes":"0.1875\"","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%20571/End_Mills_-_End_Mill_-_Double_End_Mills_-_List_571_-_Catalog"],"Friendly Name":"571"}

{"Number of Flutes":"2","Corner Radius - Inch (R)":["0.0625","0.09375","0.125","0.15625","0.1875","0.25","0.3125","0.375","0.5","0.625","0.75"],"Diameter - Inch (D)":["0.125","0.1875","0.25","0.3125","0.375","0.5","0.625","0.75","1","1.25","1.5"],"Cutting Diameter Tolerance - Inch":"+0.0011 / -0","Diameter - Fractional Size (D)":["1/8","3/16","1/4","5/16","3/8","1/2","5/8","3/4","1","1-1/4","1-1/2"],"Product Overview":"2 Flute, Regular Length, Ball End","Length of Cut - Inch (Lc)":["0.375","0.5","0.625","0.75","1","1.375","1.625","2.25","2.5"],"Overall Length - Inch (L)":["2.3125","2.375","2.4375","2.5","3","3.5","3.875","4.75","5"],"Helix Angle - Degree":"30","Shank Diameter - Inch (d)":["0.375","0.5","0.625","0.75","1","1.25"],"Web Literature 4":"800388CA","Brand":"EXOMILL","Web Literature 1":"8002024CA-EM,319|8002024CA-EMT,170","End Cut Type":"Ball Nose","Hardened Steels : 35 HRC":"H; Best","Notes":"Other coatings available upon request.","Surface Treatment":"BRIGHT","Alloy Steels : 4140; 4340":"P; Best","Units":"Inch","Die Steels":"P; Best","Cast Iron":"K; Best","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":"Center Cutting","Stainless Steels : 17-4PH":"M; Best","Stainless Steels : 300":"M; Best","Stainless Steels : 400":"M; Best","High Carbon Steel : 1065":"P; Good","Low Carbon Steel : 1010; 1018":"P; Good","View Catalog Page":"Here","View Speed and Feed Page":"Here","Aluminum : 6061; 7075":"N; Good","Aluminum : Casting":"N; Good","Coolant Thru":"No","Medium Carbon Steel : 1035; 1045":"P; Good","Weldon Flat":"Yes","Mill Type":"Single End","Full Description":"Premium Powdered Metal End Mills for Difficult to Machine Materials","Short Description":"Premium Powdered Metal End Mills for Difficult to Machine Materials","Length of Cut - Specification":["REGULAR","STUB"],"Cutting Direction":"RH","Helix Direction":"RH","Substrate":"VC-10","List Name":"VC-10 CPM-EBD","Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"1/8\" - 1.5\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"2.3125\" - 5\"","Shank-Sizes":"0.375\" - 1.25\"","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%20621/End_Mills_-_End_Mill_-_EXOMILL_VC-10_-_List_621_-_Catalog"],"Friendly Name":"621"}

{"Number of Flutes":["4","6"],"Corner Radius - Inch (R)":["0.1875","0.25","0.3125","0.375","0.4375","0.5","0.625","0.75"],"Cutting Diameter Tolerance - Inch":"+0.0011 / -0","Diameter - Inch (D)":["0.375","0.5","0.625","0.75","0.875","1","1.25","1.5"],"Diameter - Fractional Size (D)":["3/8","1/2","5/8","3/4","7/8","1","1-1/4","1-1/2"],"Length of Cut - Inch (Lc)":["0.75","1.25","1.625","1.875","2"],"Helix Angle - Degree":"30","Overall Length - Inch (L)":["2.5","3.25","3.75","3.875","4.125","4.5"],"Shank Diameter - Inch (d)":["0.375","0.5","0.625","0.75","0.875","1","1.25"],"Web Literature 4":"800388CA","Brand":"EXOMILL","Web Literature 1":"8002024CA-EM,320|8002024CA-EMT,170","End Cut Type":"Ball Nose","Hardened Steels : 35 HRC":"H; Best","Notes":"Other coatings available upon request.","Surface Treatment":"BRIGHT","Alloy Steels : 4140; 4340":"P; Best","Units":"Inch","Die Steels":"P; Best","Cast Iron":"K; Best","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":"Center Cutting","Stainless Steels : 17-4PH":"M; Best","Stainless Steels : 300":"M; Best","Stainless Steels : 400":"M; Best","High Carbon Steel : 1065":"P; Good","Low Carbon Steel : 1010; 1018":"P; Good","View Catalog Page":"Here","View Speed and Feed Page":"Here","Aluminum : 6061; 7075":"N; Good","Aluminum : Casting":"N; Good","Coolant Thru":"No","Medium Carbon Steel : 1035; 1045":"P; Good","Weldon Flat":"Yes","Mill Type":"Single End","Full Description":"Premium Powdered Metal End Mills for Difficult to Machine Materials","Short Description":"Premium Powdered Metal End Mills for Difficult to Machine Materials","Length of Cut - Specification":["REGULAR","STUB"],"Product Overview":"Regular Length, Ball End, Multiple Flute","Cutting Direction":"RH","Helix Direction":"RH","Substrate":"VC-10","List Name":"VC-10 CPM-EBM","Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"3/8\" - 1.5\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"2.5\" - 4.5\"","Shank-Sizes":"0.375\" - 1.25\"","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%20644/End_Mills_-_End_Mill_-_EXOMILL_VC-10_-_List_644_-_Catalog"],"Friendly Name":"644"}

{"Number of Flutes":"2","Coating Thickness (µm)":["12","20"],"Corner Radius - Inch (R)":["0.015625","0.023437","0.03125","0.039062","0.046875","0.0625","0.078125","0.09375","0.125","0.15625","0.1875","0.25"],"Neck Diameter - Inch (d1)":["0.028","0.04","0.056","0.07","0.088"],"Neck Length - Inch (L1)":["0.25","0.5"],"Diameter - Inch (D)":["0.03125","0.046875","0.0625","0.078125","0.09375","0.125","0.15625","0.1875","0.25","0.3125","0.375","0.5"],"Radius Tolerance - Inch":"+0 / -0.0020","Diameter - Fractional Size (D)":["1/32","3/64","1/16","5/64","3/32","1/8","5/32","3/16","1/4","5/16","3/8","1/2"],"Shank Diameter - Inch (d)":["0.125","0.15625","0.1875","0.25","0.3125","0.375","0.5"],"Length of Cut - Inch (Lc)":["0.09375","0.1875","0.25","0.375","0.5","0.5625","0.75","0.8125","0.875","1"],"Overall Length - Inch (L)":["1.75","2","2.5","3"],"Helix Angle - Degree":"30","Web Literature 4":"800388CA","Brand":"EXOCARB","Web Literature 1":"8002024CA-EM,291|8002024CA-EMT,49","End Cut Type":"Ball Nose","Graphite":"Other; Best","Substrate":"Carbide","Units":"Inch","Cutting Type":"Center Cutting","Shank Tolerance":"h6","Surface Treatment":"DIAMOND","List Name":"DIAMOND D-RG-EDBR","Full Description":"High Performance Diamond Coated Ball Mills for Graphite & Non-Ferrous Materials","Short Description":"High Performance Diamond Coated Ball Mills for Graphite & Non-Ferrous Materials","View Catalog Page":"Here","View Speed and Feed Page":"Here","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Weldon Flat":"No","Coolant Thru":"No","Mill Type":"Single End","Length of Cut - Specification":["REGULAR","LONG"],"Product Overview":"Standard Series, Ball End, Regular Length, 2 Flute, OSG Diamond","Cutting Direction":"RH","Helix Direction":"RH","Diameter-Sizes":"1/32\" - 0.5\"","Flute-Sizes":"-","Neck-Sizes":"0.25\" - 0.5\"","Taper-Sizes":"-","Overall-Sizes":"1.75\" - 3\"","Shank-Sizes":"0.125\" - 0.5\"","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%207010/End_Mills_-_End_Mill_-_EXOCARB_Diamond_-_List_7010_-_Catalog"],"Friendly Name":"7010"}

{"Coating Thickness (µm)":"12","Number of Flutes":"4","Corner Radius - Inch (R)":["0.015625","0.023437","0.03125","0.039062","0.046875","0.0625","0.09375","0.125","0.15625","0.1875","0.25"],"Neck Diameter - Inch (d1)":["0.028","0.04","0.056","0.07","0.088"],"Neck Length - Inch (L1)":["0.25","0.5"],"Diameter - Inch (D)":["0.03125","0.046875","0.0625","0.078125","0.09375","0.125","0.1875","0.25","0.3125","0.375","0.5"],"Radius Tolerance - Inch":"+0 / -0.0015","Diameter - Fractional Size (D)":["1/32","3/64","1/16","5/64","3/32","1/8","3/16","1/4","5/16","3/8","1/2"],"Shank Diameter - Inch (d)":["0.125","0.1875","0.25","0.3125","0.375","0.5"],"Length of Cut - Inch (Lc)":["0.09375","0.1875","0.25","0.375","0.5","0.75","0.8125","0.875","1"],"Overall Length - Inch (L)":["1.75","2","2.5","3"],"Helix Angle - Degree":"30","Web Literature 4":"800388CA","Brand":"EXOCARB","Web Literature 1":"8002024CA-EM,293|8002024CA-EMT,49","End Cut Type":"Ball Nose","Graphite":"Other; Best","Substrate":"Carbide","Units":"Inch","Cutting Type":"Center Cutting","Shank Tolerance":"h6","Surface Treatment":"DIAMOND","List Name":"DIAMOND D-GF-EBMR","Full Description":"High Performance Diamond Coated Ball Mills for Graphite & Non-Ferrous Materials","Short Description":"High Performance Diamond Coated Ball Mills for Graphite & Non-Ferrous Materials","View Catalog Page":"Here","View Speed and Feed Page":"Here","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Weldon Flat":"No","Coolant Thru":"No","Mill Type":"Single End","Length of Cut - Specification":["REGULAR","LONG"],"Product Overview":"Standard Series, Ball End, Regular Length, 4 Flute, OSG Diamond","Cutting Direction":"RH","Helix Direction":"RH","Diameter-Sizes":"1/32\" - 0.5\"","Flute-Sizes":"-","Neck-Sizes":"0.25\" - 0.5\"","Taper-Sizes":"-","Overall-Sizes":"1.75\" - 3\"","Shank-Sizes":"0.125\" - 0.5\"","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%207030/End_Mills_-_End_Mill_-_EXOCARB_Diamond_-_List_7030_-_Catalog"],"Friendly Name":"7030"}

{"Coating Thickness (µm)":"12","Number of Flutes":"4","Overall Length - Inch (L)":["4","5"],"Corner Radius - Inch (R)":["0.09375","0.125","0.1875","0.25"],"Radius Tolerance - Inch":"+0 / -0.0015","Diameter - Inch (D)":["0.1875","0.25","0.375","0.5"],"Shank Diameter - Inch (d)":["0.1875","0.25","0.375","0.5"],"Diameter - Fractional Size (D)":["3/16","1/4","3/8","1/2"],"Length of Cut - Inch (Lc)":["1","1.5","2"],"Helix Angle - Degree":"30","Web Literature 4":"800388CA","Brand":"EXOCARB","Length of Cut - Specification":["EXTRA LONG","LONG"],"Web Literature 1":"8002024CA-EM,294|8002024CA-EMT,49","End Cut Type":"Ball Nose","Graphite":"Other; Best","Substrate":"Carbide","Units":"Inch","Cutting Type":"Center Cutting","Shank Tolerance":"h6","Surface Treatment":"DIAMOND","List Name":"DIAMOND D-GF-EBML","Full Description":"High Performance Diamond Coated Ball Mills for Graphite & Non-Ferrous Materials","Short Description":"High Performance Diamond Coated Ball Mills for Graphite & Non-Ferrous Materials","View Catalog Page":"Here","View Speed and Feed Page":"Here","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Weldon Flat":"No","Coolant Thru":"No","Mill Type":"Single End","Product Overview":"Standard Series, Ball End, Long Length, 4 Flute, OSG Diamond","Cutting Direction":"RH","Helix Direction":"RH","Diameter-Sizes":"3/16\" - 0.5\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"4\" - 5\"","Shank-Sizes":"0.1875\" - 0.5\"","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%207031/End_Mills_-_End_Mill_-_EXOCARB_Diamond_-_List_7031_-_Catalog"],"Friendly Name":"7031"}

{"Overall Length - Inch (L)":["3","4","6"],"Coating Thickness (µm)":"12","Number of Flutes":"4","Corner Radius - Inch (R)":["0.03125","0.046875","0.0625","0.09375","0.125","0.15625","0.1875","0.25"],"Neck Diameter - Inch (d1)":["0.059","0.089","0.119","0.178","0.238","0.297","0.356","0.475"],"Neck Length - Inch (L1)":["0.313","0.469","0.625","0.938","0.75","1.125","1.5"],"Diameter - Inch (D)":["0.0625","0.09375","0.125","0.1875","0.25","0.3125","0.375","0.5"],"Radius Tolerance - Inch":"+0 / -0.0015","Diameter - Fractional Size (D)":["1/16","3/32","1/8","3/16","1/4","5/16","3/8","1/2"],"Shank Diameter - Inch (d)":["0.0625","0.09375","0.125","0.1875","0.25","0.3125","0.375","0.5"],"Length of Cut - Inch (Lc)":["0.0625","0.09375","0.125","0.1875","0.25","0.3125","0.375","0.5"],"Helix Angle - Degree":"30","Web Literature 4":"800388CA","Brand":"EXOCARB","Web Literature 1":"8002024CA-EM,295|8002024CA-EMT,49","End Cut Type":"Ball Nose","Graphite":"Other; Best","Substrate":"Carbide","Units":"Inch","Cutting Type":"Center Cutting","Type (feature)":"Long Shank","Shank Tolerance":"h6","Surface Treatment":"DIAMOND","List Name":"DIAMOND LS-BN","Full Description":"High Performance Diamond Coated Ball Mills for Graphite & Non-Ferrous Materials","Short Description":"High Performance Diamond Coated Ball Mills for Graphite & Non-Ferrous Materials","View Catalog Page":"Here","View Speed and Feed Page":"Here","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Weldon Flat":"No","Coolant Thru":"No","Mill Type":"Single End","Product Overview":"Standard Series, Stub Length, 4 Flute, Long Shank, Ball End, OSG Diamond","Cutting Direction":"RH","Length of Cut - Specification":"STUB","Helix Direction":"RH","Diameter-Sizes":"1/16\" - 0.5\"","Flute-Sizes":"-","Neck-Sizes":"0.313\" - 1.5\"","Taper-Sizes":"-","Overall-Sizes":"3\" - 6\"","Shank-Sizes":"0.0625\" - 0.5\"","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%207032/End_Mills_-_End_Mill_-_EXOCARB_Diamond_-_List_7032_-_Catalog"],"Friendly Name":"7032"}

{"Number of Flutes":"2","Length of Cut - Metric (Lc)":["4","10","15","20","25","30"],"Coating Thickness (µm)":"12","Neck Diameter - Metric (d1)":["0.95","1.95"],"Corner Radius - Metric (R)":["0.5","1","1.5","2","3","4","5","6"],"Overall Length - Metric (L)":["45","50","55","63","75"],"Shank Diameter - Metric (d)":["3","4","6","8","10","12"],"Radius Tolerance - Metric":"+0 / -0.020","Neck Length - Metric (L1)":["4.95","11.95"],"Diameter - Metric (D)":["1","2","3","4","6","8","10","12"],"Helix Angle - Degree":"30","Web Literature 4":"800388CA","Brand":"EXOCARB","Web Literature 1":"8002024CA-EM,292|8002024CA-EMT,49","End Cut Type":"Ball Nose","Graphite":"Other; Best","Substrate":"Carbide","Cutting Type":"Center Cutting","Length of Cut - Specification":["LONG","REGULAR"],"Shank Tolerance":"h6","Surface Treatment":"DIAMOND","List Name":"DIAMOND D-RG-EBD","Full Description":"High Performance Diamond Coated End Mills for Graphite & Non-Ferrous Materials","Short Description":"High Performance Diamond Coated End Mills for Graphite & Non-Ferrous Materials","View Catalog Page":"Here","View Speed and Feed Page":"Here","Units":"Metric","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Weldon Flat":"No","Coolant Thru":"No","Mill Type":"Single End","Product Overview":"Standard Series, Ball End, Regular Length, 2 Flute, OSG Diamond","Cutting Direction":"RH","Helix Direction":"RH","Diameter-Sizes":"1mm - 12mm","Flute-Sizes":"-","Neck-Sizes":"4.95mm - 11.95mm","Taper-Sizes":"-","Overall-Sizes":"45mm - 75mm","Shank-Sizes":"3mm - 12mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%207110/End_Mills_-_End_Mill_-_EXOCARB_Diamond_-_List_7110_-_Catalog"],"Friendly Name":"7110"}

{"Number of Flutes":["2","4"],"Coating Thickness (µm)":"12","Corner Radius - Metric (R)":["0.25","0.5","0.75","1","1.5","2","3","4","5","6"],"Neck Diameter - Metric (d1)":["0.48","0.96","1.43","1.9","2.85","3.8","5.7","7.6","9.5","11.4"],"Shank Diameter - Metric (d)":["3","4","6","8","10","12"],"Overall Length - Metric (L)":["50","60","75","100","125","150"],"Radius Tolerance - Metric":"+0 / -0.015","Neck Length - Metric (L1)":["2.5","5","7.5","10","15","20","30","32","40","48"],"Diameter - Metric (D)":["0.5","1","1.5","2","3","4","6","8","10","12"],"Helix Angle - Degree":"30","Length of Cut - Metric (Lc)":["0.5","1","1.5","2","3","4","6","8","10","12"],"Web Literature 4":"800388CA","Brand":"EXOCARB","Web Literature 1":"8002024CA-EM,296|8002024CA-EMT,49","End Cut Type":"Ball Nose","Graphite":"Other; Best","Substrate":"Carbide","Cutting Type":"Center Cutting","Type (feature)":"Long Shank","Shank Tolerance":"h6","Surface Treatment":"DIAMOND","List Name":"DIAMOND LS-BN","Full Description":"High Performance Diamond Coated Ball Mills for Graphite & Non-Ferrous Materials","Short Description":"High Performance Diamond Coated Ball Mills for Graphite & Non-Ferrous Materials","View Catalog Page":"Here","View Speed and Feed Page":"Here","Units":"Metric","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Weldon Flat":"No","Coolant Thru":"No","Mill Type":"Single End","Product Overview":"Standard Series, Stub Length, 4 Flute, Long Shank, Ball End, OSG Diamond","Cutting Direction":"RH","Length of Cut - Specification":"STUB","Helix Direction":"RH","Diameter-Sizes":"0.5mm - 12mm","Flute-Sizes":"-","Neck-Sizes":"2.5mm - 48mm","Taper-Sizes":"-","Overall-Sizes":"50mm - 150mm","Shank-Sizes":"3mm - 12mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%207173/End_Mills_-_End_Mill_-_EXOCARB_Diamond_-_List_7173_-_Catalog"],"Friendly Name":"7173"}

{"Number of Flutes":["2","4"],"Coating Thickness (µm)":"12","Corner Radius - Inch (R)":["0.007812","0.015625","0.03125","0.046875","0.0625","0.09375","0.125"],"Diameter - Inch (D)":["0.015625","0.03125","0.0625","0.09375","0.125","0.1875","0.25"],"Diameter - Fractional Size (D)":["1/64","1/32","1/16","3/32","1/8","3/16","1/4"],"Shank Diameter - Inch (d)":["0.125","0.1875","0.25"],"Length of Cut - Inch (Lc)":["0.046875","0.09375","0.1875","0.375","0.75","1"],"Overall Length - Inch (L)":["1.5","2","2.5"],"Helix Angle - Degree":"30","Web Literature 4":"800388CA","Brand":"EXOCARB","Web Literature 1":"8002024CA-EM,297|8002024CA-EMT,158","End Cut Type":"Ball Nose","Graphite":"Other; Best","Substrate":"Carbide","Units":"Inch","Cutting Type":"Center Cutting","Shank Tolerance":"h6","Surface Treatment":"DIAMOND","List Name":"DIAMOND DIA-EBDSS","Product Overview":"Die Mold Series, Ball End, Regular Length, 2 & 4 Flute, OSG Diamond","Full Description":"High Performance Diamond Coated Ball Mills for Graphite & Non-Ferrous Materials","Short Description":"High Performance Diamond Coated Ball Mills for Graphite & Non-Ferrous Materials","View Catalog Page":"Here","View Speed and Feed Page":"Here","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Weldon Flat":"No","Coolant Thru":"No","Mill Type":"Single End","Length of Cut - Specification":["REGULAR","LONG","EXTRA LONG"],"Cutting Direction":"RH","Cutting Diameter Tolerance - Inch":["+0 / -0.0005","+0 / -0.0008"],"Helix Direction":"RH","Diameter-Sizes":"1/64\" - 0.25\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"1.5\" - 2.5\"","Shank-Sizes":"0.125\" - 0.25\"","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%207230/End_Mills_-_End_Mill_-_EXOCARB_Diamond_-_List_7230_-_Catalog","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%207230/End_Mills_-_End_Mill_-_EXOCARB_Diamond_-_List_7230_-_Face","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%207230/End_Mills_-_End_Mill_-_EXOCARB_Diamond_-_List_7230_-_Extra_2","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%207230/End_Mills_-_End_Mill_-_EXOCARB_Diamond_-_List_7230_-_Extra_1","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%207230/End_Mills_-_End_Mill_-_EXOCARB_Diamond_-_List_7230_-_Side_1","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%207230/End_Mills_-_End_Mill_-_EXOCARB_Diamond_-_List_7230_-_Angle_1"],"Friendly Name":"7230"}

{"Number of Flutes":["2","4"],"Coating Thickness (µm)":"12","Corner Radius - Inch (R)":["0.007812","0.015625","0.023437","0.03125","0.046875","0.0625","0.09375","0.125"],"Neck Diameter - Inch (d1)":["0.012","0.027","0.043","0.058","0.088","0.12","0.183","0.245"],"Neck Length - Inch (L1)":["0.16","0.31","0.47","0.63","0.94","1.5","1.88","2.5"],"Diameter - Inch (D)":["0.015625","0.03125","0.046875","0.0625","0.09375","0.125","0.1875","0.25"],"Diameter - Fractional Size (D)":["1/64","1/32","3/64","1/16","3/32","1/8","3/16","1/4"],"Shank Diameter - Inch (d)":["0.125","0.1875","0.25"],"Length of Cut - Inch (Lc)":["0.046875","0.09375","0.1875","0.375","0.75","1"],"Overall Length - Inch (L)":["1.5","2","3","4"],"Helix Angle - Degree":"30","Web Literature 4":"800388CA","Brand":"EXOCARB","Web Literature 1":"8002024CA-EM,298|8002024CA-EMT,158","End Cut Type":"Ball Nose","Graphite":"Other; Best","Substrate":"Carbide","Units":"Inch","Cutting Type":"Center Cutting","Type (feature)":"Long Neck","Shank Tolerance":"h6","Surface Treatment":"DIAMOND","List Name":"DIAMOND DIA-LN-EBM","Product Overview":"Die Mold Series, Ball End, Regular Length, 2 & 4 Flute, Long Reach, OSG Diamond","Full Description":"High Performance Diamond Coated Ball Mills for Graphite & Non-Ferrous Materials","Short Description":"High Performance Diamond Coated Ball Mills for Graphite & Non-Ferrous Materials","View Catalog Page":"Here","View Speed and Feed Page":"Here","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Weldon Flat":"No","Coolant Thru":"No","Mill Type":"Single End","Length of Cut - Specification":["REGULAR","LONG","EXTRA LONG"],"Cutting Direction":"RH","Cutting Diameter Tolerance - Inch":["+0 / -0.0004","+0 / -0.0007"],"Helix Direction":"RH","Diameter-Sizes":"1/64\" - 0.25\"","Flute-Sizes":"-","Neck-Sizes":"0.16\" - 2.5\"","Taper-Sizes":"-","Overall-Sizes":"1.5\" - 4\"","Shank-Sizes":"0.125\" - 0.25\"","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%207231/End_Mills_-_End_Mill_-_EXOCARB_Diamond_-_List_7231_-_Catalog"],"Friendly Name":"7231"}

{"Number of Flutes":"4","Corner Radius - Inch (R)":["0.015625","0.023437","0.03125","0.046875","0.0625","0.09375","0.125","0.1875","0.25"],"Diameter - Inch (D)":["0.03125","0.046875","0.0625","0.09375","0.125","0.1875","0.25","0.375","0.5"],"Diameter - Fractional Size (D)":["1/32","3/64","1/16","3/32","1/8","3/16","1/4","3/8","1/2"],"Shank Diameter - Inch (d)":["0.125","0.1875","0.25","0.375","0.5"],"Length of Cut - Inch (Lc)":["0.15625","0.234375","0.3125","0.46875","0.625","0.9375","1.25","1.875","2.25"],"Overall Length - Inch (L)":["2.5","3","4","6"],"Helix Angle - Degree":"30","Web Literature 4":"800388CA","Brand":"EXOCARB","Web Literature 1":"8002024CA-EM,299|8002024CA-EMT,159","End Cut Type":"Ball Nose","Graphite":"Other; Best","Web Literature 2":"800369CA","Substrate":"Carbide","Units":"Inch","Product Overview":"Carbide, DG Coating, Inch Sizes","Cutting Type":"Center Cutting","Length of Cut - Specification":"LONG","Full Description":"Long Length of Cut DG Coated 4-Fluted Ball Nose End Mills for Graphite","Short Description":"Long Length of Cut DG Coated 4-Fluted Ball Nose End Mills for Graphite","Benefit 1":"Low resistance to minimize the chipping of the work piece, Stable diamond crystals for milling graphite","Shank Tolerance":"h6","Surface Treatment":"DG","Feature 1":"DG Coating","List Name":"DG-EBML","View Catalog Page":"Here","View Speed and Feed Page":"Here","Weldon Flat":"No","Coolant Thru":"No","Mill Type":"Single End","Cutting Direction":"RH","Radius Tolerance - Inch":["+/- 0.00028","+/- 0.00039"],"Helix Direction":"RH","Diameter-Sizes":"1/32\" - 0.5\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"2.5\" - 6\"","Shank-Sizes":"0.125\" - 0.5\"","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%207430/End_Mills_-_End_Mill_-_EXOCARB_DG-EBML_-_List_7430","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%207430/OSG_-_Website_-_New_Products_-_DG-EBML"],"Friendly Name":"7430"}

{"Number of Flutes":"4","Corner Radius - Inch (R)":["0.015625","0.023437","0.03125","0.046875","0.0625","0.09375","0.125"],"Neck Length - Inch (L1)":["0.25","0.5","0.625","1","1.25","1.5","2"],"Diameter - Inch (D)":["0.03125","0.046875","0.0625","0.09375","0.125","0.1875","0.25"],"Diameter - Fractional Size (D)":["1/32","3/64","1/16","3/32","1/8","3/16","1/4"],"Shank Diameter - Inch (d)":["0.125","0.1875","0.25"],"Length of Cut - Inch (Lc)":["0.15625","0.234375","0.3125","0.46875","0.625","0.9375","1.25"],"Overall Length - Inch (L)":["2.5","3","4"],"Helix Angle - Degree":"30","Web Literature 4":"800388CA","Brand":"EXOCARB","Web Literature 1":"8002024CA-EM,300|8002024CA-EMT,159","End Cut Type":"Ball Nose","Graphite":"Other; Best","Web Literature 2":"800369CA","Substrate":"Carbide","Units":"Inch","Product Overview":"Carbide, DG Coating, Inch Sizes","Cutting Type":"Center Cutting","Length of Cut - Specification":"LONG","Full Description":"Long Length of Cut DG Coated 4-Fluted Long Neck Ball Nose End Mills for Graphite","Short Description":"Long Length of Cut DG Coated 4-Fluted Long Neck Ball Nose End Mills for Graphite","Type (feature)":"Long Neck","Benefit 1":"Low resistance to minimize the chipping of the work piece, Stable diamond crystals for milling graphite","Shank Tolerance":"h6","Surface Treatment":"DG","Feature 1":"DG Coating","List Name":"DG-LN-EBML","View Catalog Page":"Here","View Speed and Feed Page":"Here","Weldon Flat":"No","Coolant Thru":"No","Mill Type":"Single End","Cutting Direction":"RH","Radius Tolerance - Inch":["+/- 0.00028","+/- 0.00039"],"Helix Direction":"RH","Diameter-Sizes":"1/32\" - 0.25\"","Flute-Sizes":"-","Neck-Sizes":"0.25\" - 2\"","Taper-Sizes":"-","Overall-Sizes":"2.5\" - 4\"","Shank-Sizes":"0.125\" - 0.25\"","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%207431/End_Mills_-_End_Mill_-_EXOCARB_DG-LN-EBML_-_List_7431","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%207431/OSG_-_Website_-_New_Products_-_DG-LN-EBML"],"Friendly Name":"7431"}

{"Number of Flutes":"2","Corner Radius - Inch (R)":["0.015625","0.03125","0.046875","0.0625","0.09375","0.125","0.15625","0.1875","0.25"],"Neck Diameter - Inch (d1)":["0.029","0.06","0.092","0.123","0.185","0.246","0.308","0.371","0.496"],"Effective Neck Length by Incline Angle 0.5° - Inch":["0.105","0.172","0.208","0.274","0.305"],"Neck Length - Inch (L1)":["0.512","0.52","0.504","0.508","0.425","0.63","0.756","1"],"Diameter - Inch (D)":["0.03125","0.0625","0.09375","0.125","0.1875","0.25","0.3125","0.375","0.5"],"Effective Neck Length by Incline Angle 1.5° - Inch":["0.112","0.183","0.228","0.297","0.328"],"Effective Neck Length by Incline Angle 1° - Inch":["0.108","0.178","0.218","0.286","0.317"],"Effective Neck Length by Incline Angle 2° - Inch":["0.115","0.189","0.237","0.308","0.339"],"Effective Neck Length by Incline Angle 3° - Inch":["0.124","0.202","0.255","0.329","0.36"],"Type":["1","2"],"Diameter - Fractional Size (D)":["1/32","1/16","3/32","1/8","3/16","1/4","5/16","3/8","1/2"],"Interference Angle - Degree (α)":["12.39","10.39","8.89","7.03","4.1900000000000004"],"Helix Angle - Degree":"25","Full Description":"2-flute high-precision finishing carbide ball end mill for high-hardness steels","Short Description":"2-flute high-precision finishing carbide ball end mill for high-hardness steels","Non-Taper Neck Length - Inch (L2)":["0.094","0.157","0.189","0.252","0.283"],"Length of Cut - Inch (Lc)":["0.024","0.051","0.075","0.098","0.15","0.374","0.469","0.563","0.752"],"Overall Length - Inch (L)":["1.5","2","2.5","3","3.5","4"],"Shank Diameter - Inch (d)":["0.25","0.3125","0.375","0.5"],"Surface Treatment":"DUROREY","Web Literature 4":"800388CA","Brand":"A Brand","Web Video 1":"https://youtu.be/_apD06jH1vE","List Name":"AE-BD-H","Web Literature 1":"8002024CA-EM,258|8002024CA-EMT,127","End Cut Type":"Ball Nose","Web Literature 2":"800312CA-V5","Hardened Steels : 45-50 HRC":"H; Best","Hardened Steels : 50-70 HRC":"H; Best","Substrate":"Carbide","Units":"Inch","Hardened Steels : 35 HRC":"H; Good","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":"Center Cutting","Shank Tolerance":"h4","Benefit 1":"Controls chipping while securing cutting quality by making the negative angle weaker near the outer periphery; chipping resistance is enhanced in combination with the weaker helix angle specification","Alloy Steels : 4140; 4340":"P; Good","Die Steels":"P; Good","View Catalog Page":"Here","View Speed and Feed Page":"Here","Weldon Flat":"No","Coolant Thru":"No","Mill Type":"Single End","Cutting Direction":"RH","Length of Cut - Specification":"STUB","Feature 2":"Superior Ball R Precision","Feature 4":"Superior Shank Accuracy","Benefit 4":"Supports h4 tolerance (0/-0.004)","Benefit 3":"Thickening of the center core to prevent deformation of the ball tip and improve control of chipping","Feature 3":"Thickness at Center","Cutting Diameter Tolerance - Inch":"+/- 0.00028","Helix Direction":"RH","Feature 1":"Variable Negative Spiral Gash","Benefit 2":"Secures stable R accuracy across 180°","Diameter-Sizes":"1/32\" - 0.5\"","Flute-Sizes":"-","Neck-Sizes":"0.425\" - 1\"","Taper-Sizes":"-","Overall-Sizes":"1.5\" - 4\"","Shank-Sizes":"0.25\" - 0.5\"","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%208410/End_Mills_-_End_Mill_-_A_Brand_AE-BD-H_-_List_8410_-_Catalog"],"Friendly Name":"8410"}

{"Number of Flutes":"4","Corner Radius - Inch (R)":["0.0625","0.09375","0.125","0.15625","0.1875","0.25"],"Diameter - Inch (D)":["0.125","0.1875","0.25","0.3125","0.375","0.5"],"Diameter - Fractional Size (D)":["1/8","3/16","1/4","5/16","3/8","1/2"],"Shank Diameter - Inch (d)":["0.125","0.1875","0.25","0.3125","0.375","0.5"],"Length of Cut - Inch (Lc)":["0.25","0.375","0.5","0.625","0.75","0.875"],"Overall Length - Inch (L)":["2","2.5","3.5","4","4.375"],"Surface Treatment":"DUROREY","Helix Angle - Degree":"40","Web Literature 4":"800388CA","Full Description":"4-flute high-precision finishing carbide ball end mill for high-hardness steels","Short Description":"4-flute high-precision finishing carbide ball end mill for high-hardness steels","Brand":"A Brand","Web Video 1":"https://youtu.be/_apD06jH1vE","Web Video 2":"https://youtu.be/3U8QKmlMY3Q","List Name":"AE-BM-H","Web Literature 1":"8002024CA-EM,264|8002024CA-EMT,133","End Cut Type":"Ball Nose","Web Literature 2":"800312CA-V5","Hardened Steels : 45-50 HRC":"H; Best","Hardened Steels : 50-70 HRC":"H; Best","Substrate":"Carbide","Units":"Inch","Hardened Steels : 35 HRC":"H; Good","Feature 3":"Center 2-Flute Specification","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":"Center Cutting","Shank Tolerance":"h4","Benefit 4":"Controls harmonic vibration commonly generated during milling with multiple flutes to enable high-efficiency milling","Benefit 3":"Controls tear when milling flat areas to improve surface accuracy & secures chip pockets to control the clogging of chips","Alloy Steels : 4140; 4340":"P; Good","Die Steels":"P; Good","View Catalog Page":"Here","View Speed and Feed Page":"Here","Weldon Flat":"No","Coolant Thru":"No","Feature 2":"Sharp Spiral Curve","Mill Type":"Single End","Benefit 2":"Reduces cutting resistance and enables stable performance with extended tool life","Length of Cut - Specification":["REGULAR","STUB"],"Cutting Direction":"RH","Benefit 1":"Suitable for a wide range of processes, from roughing to semi-roughing","Feature 1":"Superior Ball R Precision","Cutting Diameter Tolerance - Inch":["+/- 0.00028","+/- 0.00039"],"Helix Direction":"RH","Feature 4":"Unequal Flute Spacing","Diameter-Sizes":"1/8\" - 0.5\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"2\" - 4.375\"","Shank-Sizes":"0.125\" - 0.5\"","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%208430/End_Mills_-_End_Mill_-_A_Brand_AE-BM-H_-_List_8430_-_Catalog"],"Friendly Name":"8430"}

{"Number of Flutes":"2","Neck Diameter - Metric (d1)":["0.95","1.45","1.95","2.85","3.85","4.8","5.8","7.7","9.7","11.7","0.19","0.75","1.35","2.35"],"Corner Radius - Metric (R)":["0.5","0.75","1","1.5","2","2.5","3","4","5","6","0.1","0.4","0.7","1.25"],"Effective Neck Length by Incline Angle 0.5° - Metric":["2.14","3.17","4.19","6.44","8.49","10.63","0.21","1.7","2.95","5.21"],"Effective Neck Length by Incline Angle 1.5° - Metric":["2.26","3.34","4.42","6.79","8.96","11.22","0.24","1.79","3.07","5.43"],"Effective Neck Length by Incline Angle 1° - Metric":["2.2","3.25","4.3","6.61","8.71","10.9","0.23","1.74","3.02","5.31"],"Overall Length - Metric (L)":["50","60","70","80","90","100","110","40"],"Effective Neck Length by Incline Angle 2° - Metric":["2.33","3.44","4.55","7","9.22","11.55","0.25","1.84","3.13","5.54"],"Effective Neck Length by Incline Angle 3° - Metric":["2.48","3.66","4.85","7.45","9.81","0.28","1.93","3.27","5.82"],"Shank Diameter - Metric (d)":["4","6","8","10","12"],"Type":["1","2"],"Interference Angle - Degree (α)":["11.71","10.029999999999999","10.64","8.15","5.65","2.92","14.78","12.5","10.5","6.46"],"Helix Angle - Degree":"25","Neck Length - Metric (L1)":["7.7","7.9","12","11.9","8","12.1","12.2","7.31","7.66","7.74","8.08"],"Full Description":"2-flute high-precision finishing carbide ball end mill for high-hardness steels","Short Description":"2-flute high-precision finishing carbide ball end mill for high-hardness steels","Non-Taper Neck Length - Metric (L2)":["2","3","4","6","8","10","0.4","1.6","2.8","5"],"Diameter - Metric (D)":["1","1.5","2","3","4","5","6","8","10","12","0.2","0.8","1.4","2.5"],"Length of Cut - Metric (Lc)":["0.8","1.2","1.6","2.4","3.4","4.2","9","12","15","18","0.16","0.6","1.1","2"],"Surface Treatment":"DUROREY","Brand":"A Brand","Web Video 1":"https://youtu.be/_apD06jH1vE","List Name":"AE-BD-H","Web Literature 1":"8002024CA-EM,259|8002024CA-EMT,127","End Cut Type":"Ball Nose","Web Literature 2":"800312CA-V5","Substrate":"Carbide","Hardened Steels : 45-50 HRC":"H; Best","Web Literature 4":"800388CA","Hardened Steels : 50-70 HRC":"H; Best","Hardened Steels : 35 HRC":"H; Good","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":"Center Cutting","Shank Tolerance":"h4","Benefit 1":"Controls chipping while securing cutting quality by making the negative angle weaker near the outer periphery; chipping resistance is enhanced in combination with the weaker helix angle specification","Alloy Steels : 4140; 4340":"P; Good","Die Steels":"P; Good","View Catalog Page":"Here","View Speed and Feed Page":"Here","Units":"Metric","Weldon Flat":"No","Coolant Thru":"No","Mill Type":"Single End","Cutting Direction":"RH","Length of Cut - Specification":"STUB","Feature 2":"Superior Ball R Precision","Feature 4":"Superior Shank Accuracy","Benefit 4":"Supports h4 tolerance (0/-0.004)","Helix Direction":"RH","Benefit 3":"Thickening of the center core to prevent deformation of the ball tip and improve control of chipping","Feature 3":"Thickness at Center","Cutting Diameter Tolerance - Metric":"+/- 0.005","Feature 1":"Variable Negative Spiral Gash","Benefit 2":"Secures stable R accuracy across 180°","Diameter-Sizes":"0.2mm - 12mm","Flute-Sizes":"-","Neck-Sizes":"7.31mm - 12.2mm","Taper-Sizes":"-","Overall-Sizes":"40mm - 110mm","Shank-Sizes":"4mm - 12mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%208510/End_Mills_-_End_Mill_-_A_Brand_AE-BD-H_-_List_8510_-_Catalog"],"Friendly Name":"8510"}

{"Length of Cut - Metric (Lc)":["2","3","5","4","9","12","15","18"],"Number of Flutes":"4","Neck Diameter - Metric (d1)":["0.95","1.45","2.45","1.95","2.85","3.85","4.85"],"Corner Radius - Metric (R)":["0.5","0.75","1.25","1","1.5","2","2.5","3","4","5","6"],"Effective Neck Length by Incline Angle 0.5° - Metric":["2.13","2.64","5.32","4.19","6.44","8.49","10.54"],"Effective Neck Length by Incline Angle 1.5° - Metric":["2.25","2.78","5.52","4.42","6.79","8.96","11.12"],"Effective Neck Length by Incline Angle 1° - Metric":["2.19","2.71","5.4","4.3","6.61","8.71","10.82"],"Effective Neck Length by Incline Angle 2° - Metric":["2.32","2.85","5.64","4.55","7","9.22","11.45"],"Overall Length - Metric (L)":["50","60","70","80","90"],"Effective Neck Length by Incline Angle 3° - Metric":["2.46","3.02","5.81","4.85","7.45","9.81"],"Shank Diameter - Metric (d)":["4","6","8","10","12"],"Type":["1","2"],"Interference Angle - Degree (α)":["11.85","10.15","9.57","10.64","8.15","5.65","2.95"],"Neck Length - Metric (L1)":["8","12","12.1","12.2"],"Full Description":"2-flute high-precision finishing carbide ball end mill for high-hardness steels","Short Description":"2-flute high-precision finishing carbide ball end mill for high-hardness steels","Non-Taper Neck Length - Metric (L2)":["2","3","5","4","6","8","10"],"Diameter - Metric (D)":["1","1.5","2.5","2","3","4","5","6","8","10","12"],"Surface Treatment":"DUROREY","Helix Angle - Degree":"40","Web Literature 4":"800388CA","Brand":"A Brand","Web Video 1":"https://youtu.be/_apD06jH1vE","Web Video 2":"https://youtu.be/3U8QKmlMY3Q","List Name":"AE-BM-H","Web Literature 1":"8002024CA-EM,265|8002024CA-EMT,133","End Cut Type":"Ball Nose","Web Literature 2":"800312CA-V5","Hardened Steels : 45-50 HRC":"H; Best","Hardened Steels : 50-70 HRC":"H; Best","Substrate":"Carbide","Hardened Steels : 35 HRC":"H; Good","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":"Center Cutting","Shank Tolerance":"h4","Benefit 1":"Controls chipping while securing cutting quality by making the negative angle weaker near the outer periphery; chipping resistance is enhanced in combination with the weaker helix angle specification","Alloy Steels : 4140; 4340":"P; Good","Die Steels":"P; Good","View Catalog Page":"Here","View Speed and Feed Page":"Here","Units":"Metric","Weldon Flat":"No","Coolant Thru":"No","Mill Type":"Single End","Length of Cut - Specification":["REGULAR","STUB"],"Cutting Direction":"RH","Feature 2":"Superior Ball R Precision","Feature 4":"Superior Shank Accuracy","Benefit 4":"Supports h4 tolerance (0/-0.004)","Benefit 3":"Thickening of the center core to prevent deformation of the ball tip and improve control of chipping","Feature 3":"Thickness at Center","Cutting Diameter Tolerance - Metric":["+/- 0.005","+/- 0.007","+/- 0.010"],"Helix Direction":"RH","Feature 1":"Variable Negative Spiral Gash","Benefit 2":"Secures stable R accuracy across 180°","Diameter-Sizes":"1mm - 12mm","Flute-Sizes":"-","Neck-Sizes":"8mm - 12.2mm","Taper-Sizes":"-","Overall-Sizes":"50mm - 90mm","Shank-Sizes":"4mm - 12mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%208530/End_Mills_-_End_Mill_-_A_Brand_AE-BM-H_-_List_8530_-_Catalog"],"Friendly Name":"8530"}

{"Number of Flutes":"2","Corner Radius - Metric (R)":["0.05","0.1","0.15","0.2","0.25","0.3","0.4","0.5","0.6","0.75","0.8","1","1.25","1.5","1.75","2","2.5","3"],"Neck Diameter - Metric (d1)":["0.095","0.19","0.29","0.38","0.48","0.55","0.75","0.95","1.15","1.45","1.55","1.95","2.35","2.85","3.35","3.85","4.85","5.85"],"Effective Neck Length by Incline Angle 0.5° - Metric":["0.3","0.51","0.53","0.79","1.04","1.56","1.82","2.08","0.63","1.3","2.59","3.11","4.14","5.18","0.85","1.06","1.58","2.09","2.61","3.13","3.64","4.16","5.2","6.23","4.68","5.19","8.29","10.36","1.32","2.15","2.67","3.7","4.22","5.25","5.77","6.28","6.8","8.35","10.42","12.49","3.18","4.21","7.31","10.41","2.14","5.24","8.34","9.38","12.48","14.55","16.61","18.68","20.75","22.82","2.55","6.27","20.74","2.65","4.2","10.4","12.47","14.54","16.6","18.67","22.81","31.08","8.33","4.19","6.26","10.39","12.46","14.53","20.73","22.8","25.9","31.07","36.24","41.4","10.58","15.75","20.92","36.42","6.44","8.5","10.57","12.64","14.71","15.74","16.77","20.91","26.08","31.24","15.73","8.49","10.55","12.62","16.76","20.89","26.06","31.23","36.4","41.56","46.73","10.54","15.71","26.04","31.21","41.55"],"Overall Length - Metric (L)":["45","50","55","60","70","65","80","90","100","120"],"Effective Neck Length by Incline Angle 1.5° - Metric":["0.32","0.54","0.56","0.84","1.11","1.67","1.94","2.22","0.66","1.39","1.66","2.77","3.32","4.43","5.54","0.9","1.12","1.68","2.23","2.79","3.34","3.89","4.45","5.56","6.66","2.78","3.33","4.44","5","5.55","8.88","11.09","1.4","2.28","2.84","3.95","4.5","5.61","6.16","6.72","7.27","8.93","11.15","13.37","2.27","3.38","4.49","5.6","6.71","7.81","8.92","11.14","2.26","3.37","4.48","5.59","6.69","7.8","8.91","10.02","11.13","13.34","15.56","17.78","19.99","22.21","24.43","2.69","4.47","6.68","8.9","11.12","22.2","6.67","11.1","13.32","15.53","17.75","19.97","22.18","24.4","33.27","13.31","4.42","6.64","8.86","11.07","13.29","15.51","17.72","22.16","24.37","27.7","33.24","38.78","11.25","16.8","22.34","6.79","9.01","11.23","13.44","15.66","16.77","17.88","22.31","27.85","33.39","16.74","8.96","11.17","13.39","17.82","22.26","27.8","33.34","38.88","16.66"],"Effective Neck Length by Incline Angle 1° - Metric":["0.31","0.53","0.54","0.81","1.08","1.61","1.88","2.15","0.65","1.07","1.34","2.14","2.68","3.21","4.28","5.35","0.88","1.09","1.63","2.16","2.7","3.23","3.76","4.3","5.37","6.44","1.62","2.69","4.83","8.58","10.71","1.36","2.21","2.75","3.82","4.35","5.42","5.96","6.49","7.03","8.63","10.77","12.91","3.28","7.55","8.62","10.76","2.2","3.27","4.34","5.41","6.48","9.69","12.9","15.04","17.18","19.31","21.45","23.59","2.62","4.33","6.47","8.61","10.75","2.72","4.32","6.46","8.6","10.74","12.88","15.02","17.16","19.3","21.44","23.58","32.13","17.15","21.43","10.72","12.86","15","17.14","21.42","23.56","26.77","32.12","37.46","42.81","10.9","16.25","21.6","37.65","6.61","8.75","10.89","13.03","15.17","16.24","17.31","21.58","26.93","32.28","16.22","8.71","10.85","12.99","17.27","21.55","26.9","32.25","37.6","42.94","48.29","10.82","16.17","26.86"],"Effective Neck Length by Incline Angle 2° - Metric":["0.33","0.56","0.58","0.86","1.15","1.73","2.01","2.3","0.68","1.14","1.43","1.72","2.29","2.87","3.44","4.59","5.74","0.93","1.16","2.31","2.88","3.46","4.03","4.61","5.76","6.91","3.45","4.6","5.18","5.75","6.9","9.2","11.5","1.44","2.36","2.93","4.08","4.66","5.81","6.38","6.96","7.53","9.26","11.56","13.86","2.34","3.49","4.64","5.79","6.94","8.09","9.24","11.54","2.33","3.48","4.63","5.78","6.93","8.08","9.23","10.38","11.53","13.83","16.13","18.43","20.73","23.03","25.33","2.77","9.21","11.51","23.01","6.89","9.19","11.49","13.79","16.09","18.39","20.69","22.99","25.29","34.49","9.18","13.78","18.38","22.98","4.55","6.85","9.15","11.45","13.75","16.05","18.35","22.95","25.25","28.7","11.63","17.38","7","9.29","11.59","13.89","16.19","17.34","18.49","23.09","28.84","34.59","17.31","9.22","11.52","13.82","18.42","23.02","28.77"],"Effective Neck Length by Incline Angle 3° - Metric":["0.36","0.6","0.62","0.93","1.24","1.86","2.17","2.48","0.73","1.23","1.54","1.85","2.47","3.09","3.71","4.96","6.2","0.99","3.1","3.72","4.35","4.97","6.21","7.45","4.33","4.95","5.58","7.44","9.93","12.41","1.53","2.53","3.15","4.39","5.01","6.26","6.88","7.5","8.12","9.99","12.47","14.96","2.5","3.75","4.99","6.23","7.48","8.72","9.96","12.45","8.69","9.94","11.18","12.42","14.91","17.4","19.88","22.37","24.86","27.34","2.95","4.94","7.43","9.91","12.4","24.83","3.04","4.91","7.39","9.88","12.36","14.85","17.34","19.82","22.31","9.87","14.84","19.81","4.85","7.33","9.82","12.31","14.79","17.28","19.76","12.48","17.39","18.63","24.85","18.58","9.81","12.3"],"Shank Diameter - Metric (d)":["4","6"],"Type":["1","2"],"Interference Angle - Degree (α)":["14.52","14.16","14.18","13.74","13.33","12.58","12.23","11.9","14.06","13.36","12.96","12.59","11.89","11.27","10.71","9.74","8.93","13.71","13.37","12.57","11.86","11.22","10.65","10.14","9.67","8.85","8.15","13.4","11.85","11.2","10.62","10.09","9.61","9.18","8.7799999999999994","8.08","6.97","6.12","12.99","11.76","11.1","10.51","9.98","9.5","8.67","8.3000000000000007","7.96","7.65","6.85","6.01","5.36","11.74","10.42","9.3699999999999992","8.51","7.8","7.19","6.67","5.83","11.71","10.33","9.23","8.35","7.62","7","6.48","6.03","5.64","4.99","4.47","4.05","3.7","3.41","3.16","11.04","9.08","7.42","6.27","5.43","3.24","10.029999999999999","8.81","7.09","5.93","5.09","4.46","3.97","3.58","3.25","2.98","2.75","2.11","5.81","4.3499999999999996","3.47","2.89","8.25","6.43","5.26","4.45","3.86","3.4","3.04","2.5099999999999998","2.31","2.06","1.75","1.52","1.34","3.62","2.5499999999999998","1.97","1.17","6.87","5.22","4.66","4.42","4.2","3.52","2.92","2.5","3.92","5.65","4.7300000000000004","4.07","3.17","2.6","2.12","1.79","1.55","1.37","1.22","2.95","1.95","0.97","0.73"],"Neck Length - Metric (L1)":["7.6","7.8","7.9","8.1","8.6","8.9","9.1","7.5","8.2","8.4","9.4","9.9","10.9","11.9","8.3","8.8","9.3","9.8","10.3","10.8","11.8","12.8","9.6","10.1","10.6","11.1","11.6","12.6","14.6","16.6","10.4","11.4","12.4","12.9","14.4","16.4","18.4","12.1","13.1","14.1","16.1","7.7","8.7","9.7","10.7","11.7","12.7","13.7","14.7","15.7","17.7","19.7","21.7","23.7","25.7","27.7","11.3","13.3","15.3","25.3","14.8","16.8","18.8","20.8","22.8","24.8","26.8","34.8","20.6","24.6","13.8","15.8","17.8","19.8","23.8","25.8","28.8","33.8","38.8","43.8","18.1","23.1","38.1","13.9","15.9","17.9","19.9","20.9","21.9","25.9","30.9","35.9","12","14","16","20","24","29","34","39","44","49","17.1","27.1","32.1","42.1"],"Full Description":"2-flute high-precision finishing carbide ball end mill for high-hardness steels","Short Description":"2-flute high-precision finishing carbide ball end mill for high-hardness steels","Non-Taper Neck Length - Metric (L2)":["0.3","0.5","0.75","1","1.5","1.75","2","0.6","1.25","2.5","3","4","5","0.8","3.5","6","4.5","8","10","1.2","5.5","6.5","12","7","9","14","16","18","20","22","2.4","30","25","35","40","15","45","50"],"Diameter - Metric (D)":["0.1"