COMPOSITE DRILLS

{"Number of Flutes":"4","Drilling L/D Ratio (xD)":["4","8","7","6"],"Shank Diameter - Metric (d)":["2.48","2.77","3.17","3.25","3.26","3.29","3.57","3.65","3.96","3.98","4.08","4.14","4.36","4.74","4.76","4.82","4.85","4.87","4.9","4.91","4.92","5.1","5.15","5.18","5.21","5.53","5.55","5.61","5.79","5.95","6.35","6.37","6.4","6.42","6.74","7.14","7.54","7.92","7.93","7.96","8.33","8.73","8.89","9.12","9.52","9.9","10.31","11.11","12.7"],"Diameter - Inch (D)":["0.098","0.109375","0.125","0.128","0.1285","0.1299","0.140625","0.144","0.15625","0.157","0.161","0.163","0.171875","0.187","0.1875","0.19","0.191","0.192","0.193","0.1935","0.194","0.201","0.203125","0.204","0.2055","0.218","0.21875","0.221","0.228","0.234375","0.25","0.251","0.252","0.253","0.265625","0.28125","0.296875","0.312","0.3125","0.3135","0.328125","0.34375","0.35","0.359375","0.375","0.390625","0.40625","0.4375","0.5"],"Flute Length - Metric (FL)":["14.4","16.1","18.4","31.9","18.9","32","19.2","20.7","21.2","23","23.2","23.7","40.1","24.1","25.4","27.6","27.7","47.3","47.6","47.8","48.1","48.2","48.3","50.1","50.6","50.8","51.2","54.3","54.5","55.1","56.8","58.4","62.3","62.6","62.8","63","66.2","70.1","74","46.1","46.2","46.3","48.4","51.7","53.1","55.4","74.4","77.4","80.6","86.8","99.3"],"Overall Length - Metric (L)":["76.2","152.4","101.6"],"Taper Length - Metric (I)":["5.1","5.6","6.4","6.5","6.6","7.2","7.3","7.9","8","8.2","8.3","8.7","9.4","9.5","9.6","9.7","9.8","10.1","10.2","10.3","10.4","11","11.1","11.5","11.8","12.5","12.6","12.7","13.3","14.1","14.9","15.6","15.7","16.4","17.2","17.5","17.9","18.7","19.4","20.2","21.8","24.9"],"Diameter - Metric (D)":["2.4892","2.77876","3.175","3.2512","3.2639","3.29946","3.57124","3.6576","3.97","3.9878","4.0894","4.1402","4.36626","4.7498","4.7625","4.826","4.8514","4.8768","4.9022","4.9149","4.9276","5.1054","5.15874","5.1816","5.2197","5.5372","5.55752","5.6134","5.7912","5.95376","6.35","6.3754","6.4008","6.4262","6.74624","7.145","7.54126","7.9248","7.9375","7.9629","8.334","8.73252","8.89","9.12876","9.525","9.921","10.32","11.1125","12.7"],"View Catalog Page":"Here","View Speed and Feed Page":"Here","Feature 2":"Elongated double-angle geometry","Feature 3":"Ultra-fine micrograin carbide","Full Description":"The Carbide AERO-D-REAM is a high performance tapered drill/reamer for composites.","Benefit 1":"Limits peel-up at hole entrance","Glass Fiber (GFRP)":"Other; Good","Benefit 2":"Reduces thrust and limits exit delamination","Helix Angle - Degree":"0","Benefit 3":"Smaller grain size yields improved wear resistance and better coating adhesion properties for extended tool life","Honeycomb: AI/AI":"Other; Best","Brand":"OSG","Honeycomb: CFRP/AI":"Other; Best","Honeycomb: CFRP/Nomex":"Other; Best","Honeycomb: GFRP/Nomex":"Other; Best","Carbon Fiber (CFRP)":"Other; Best","List Name":"AERO-D-REAM","Carbon/Carbon":"Other; Best","Coolant Thru":"No","Notes":"Brazed shanks available on request: Threaded, Quick Change and Tri-Flat.","Cutting Diameter Tolerance - Inch":"+0.0005 / -0","Product Overview":"Tapered Reamer","Shank Tolerance":"h6","Short Description":"High Performance Carbide Tapered Reamer","Cutting Direction":"RH","Diameter - Wire Gage (D)":["40","30","27","22","20","11","10","7","6","5","2","1"],"Feature 1":"Straight Flute","Substrate":"Carbide","Surface Treatment":"BRIGHT","Units":["Inch","Metric"],"Web Literature 1":["8002024CA-DR,104|8002024CA-DRT,20","8002024CA-DR,105|8002024CA-DRT,20"],"Web Literature 2":"800212CA-V4","Web Literature 4":"800387CA","Diameter - Fractional Size (D)":["7/64","1/8","9/64","5/32","11/64","3/16","13/64","7/32","15/64","1/4","17/64","9/32","19/64","5/16","21/64","11/32","23/64","3/8","25/64","13/32","7/16","1/2"],"Diameter-Sizes":"0.098\" - 12.7mm","Flute-Sizes":"14.4mm - 99.3mm","Neck-Sizes":"-","Taper-Sizes":"5.1mm - 24.9mm","Overall-Sizes":"76.2mm - 152.4mm","Shank-Sizes":"2.48mm - 12.7mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FOthers%2FList%20257/Composites_-_Drill_-_CARBIDE_AERO-D-REAM_-_List_257_-_Catalog","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FComposite%20Drills%2FList%20257/Composites_-_Drill_-_CARBIDE_AERO-D-REAM_-_List_257_-_Catalog"],"Friendly Name":"257"}

{"Diameter - Metric (D)":["4.8641","6.3754","9.5504","12.7254"],"Number of Flutes":"2","Overall Length - Metric (L)":["101.6","152.4"],"Drilling L/D Ratio (xD)":["8","6","3"],"Shank Diameter - Metric (d)":["4.86","6.37","9.55","12.72"],"Diameter - Inch (D)":["0.1915","0.25","0.376","0.501"],"Flute Length - Metric (FL)":["50.8","101.6"],"List Name":"AERO-H","Helix Angle - Degree":"40","Substrate":"Carbide","Web Literature 1":"8002024CA-DR,122|8002024CA-DRT,22","Shank Tolerance":"h6","Feature 2":"Corner radius and end gash","Notes":"Drills are oversize over nominal.","Web Literature 2":"800212CA-V4","Web Literature 4":"800387CA","Brand":"EXOCARB","Benefit 1":"Improves chip evacuation","Units":["Inch","Metric"],"Coolant Thru":"No","Feature 1":"Parabolic flute form","Short Description":"Premium High Performance TiALN Coated Carbide Stack Drill for All Stacks","Benefit 3":"Provides a sharper cutting edge to reduce burr height","Carbon Fiber (CFRP)":"Other; Best","Carbon Fiber / Al / Ti / CRES Stack":"Other; Best","Carbon Fiber / Titanium Stack":"Other; Best","Carbon Fiber / Aluminum Stack":"Other; Good","Benefit 2":"Resists chipping","Cutting Direction":"RH","View Speed and Feed Page":"Here","View Catalog Page":"Here","Feature 3":"TiALN coating","Helix Direction":"RH","Length of Cut - Specification":["TAPER","STUB"],"Cutting Diameter Tolerance - Inch":"+0 / -0.0011","Full Description":"The EXOCARB® AERO-H is a TiAlN coated carbide drill designed for composite and metal stacks. It features a high helix and parabolic flute form for improved chip evacuation as well as corner radius and end gash to resist chipping.","Surface Treatment":"TiAlN","Product Overview":"Stack Drill for All Stacks","Diameter - Wire Gage (D)":"11","Point Angle - Degree (α)":"140","Diameter - Fractional Size (D)":["1/4","3/8","1/2"],"Diameter-Sizes":"0.1915\" - 12.7254mm","Flute-Sizes":"50.8mm - 101.6mm","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"101.6mm - 152.4mm","Shank-Sizes":"4.86mm - 12.72mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FJobber%20Drills%2FList%205732/Composites_-_Drill_-_EXOCARB_AERO-H_-_List_5732_-_Catalog","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FComposite%20Drills%2FList%205732/Composites_-_Drill_-_EXOCARB_AERO-H_-_List_5732_-_Catalog"],"Friendly Name":"5732"}

{"Number of Flutes":"4","Drilling L/D Ratio (xD)":["4","8","6"],"Shank Diameter - Metric (d)":["2.5","3.26","4.1","4.76","4.82","4.85","4.87","5.53","5.62","6.35","6.37","7.93","7.96","9.52","9.55","11.13","12.72"],"Diameter - Inch (D)":["0.0985","0.1285","0.1615","0.1875","0.19","0.191","0.192","0.21875","0.2215","0.25","0.3125","0.375","0.4375","0.5"],"Flute Length - Metric (FL)":["14.5","18.9","31.9","23.8","40.1","46.7","47.3","28.3","47.7","54.3","55.2","62.3","37.1","62.6","46.2","62","46.3","62.2","55.4","74.4","55.5","74.6","64.8","99.5"],"Overall Length - Metric (L)":["76.2","152.4","101.6"],"Taper Length - Metric (I)":["5","6.5","8.1","9.4","9.5","9.6","10.9","11.1","12.5","15.5","15.6","18.6","18.7","21.7","24.8"],"Diameter - Metric (D)":["2.5019","3.2639","4.1021","4.7625","4.826","4.8514","4.8641","5.5372","5.6261","6.35","6.3754","7.9375","7.9629","9.525","9.5504","11.1379","12.7254"],"View Speed and Feed Page":"Here","View Catalog Page":"Here","Feature 2":"Elongated double-angle geometry","Feature 3":"OSG's patented diamond coating","Full Description":"The EXOPRO® AERO-D-REAM is a diamond coated drill/reamer designed to excel in carbon and glass fiber composites. It features a tapered 4-flute design and OSG's patented diamond coating.","Benefit 1":"Limits peel-up at hole entrance","Benefit 2":"Reduces thrust and limit exit delamination","Glass Fiber (GFRP)":"Other; Good","Benefit 3":"Ensures smoother and sharper cutting edges providing up to 50 times longer tool life","Helix Angle - Degree":"0","Brand":"EXOPRO","Honeycomb: CFRP/AI":"Other; Best","Honeycomb: CFRP/Nomex":"Other; Best","Honeycomb: GFRP/Nomex":"Other; Best","Carbon Fiber (CFRP)":"Other; Best","List Name":"AERO-D-REAM","Carbon/Carbon":"Other; Best","Coolant Thru":"No","Cutting Diameter Tolerance - Inch":"+0 / -0.001","Notes":"Drills are oversize over nominal. Tri-Flat Shank available upon request.","Product Overview":"Tapered Drill/Reamer","Shank Tolerance":"h6","Short Description":"Premium High Performance Diamond Coated Carbide Tapered Reamer","Cutting Direction":"RH","Diameter - Wire Gage (D)":["40","30","20","11","2"],"Feature 1":"Straight Flute","Substrate":"Carbide","Surface Treatment":"DIAMOND","Units":"Inch","Web Literature 1":["8002024CA-DR,122|8002024CA-DRT,20","8002024CA-DR,258|8002024CA-DRT,20"],"Web Literature 2":"800212CA-V4","Web Literature 4":"800387CA","Diameter - Fractional Size (D)":["3/16","7/32","1/4","5/16","3/8","7/16","1/2"],"Diameter-Sizes":"0.0985\" - 12.7254mm","Flute-Sizes":"14.5mm - 99.5mm","Neck-Sizes":"-","Taper-Sizes":"5mm - 24.8mm","Overall-Sizes":"76.2mm - 152.4mm","Shank-Sizes":"2.5mm - 12.72mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FOthers%2FList%207500/Composites_-_Drill_-_EXOPRO_AERO-D-REAM_-_List_7500_-_Catalog","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FComposite%20Drills%2FList%207500/Composites_-_Drill_-_EXOPRO_AERO-D-REAM_-_List_7500_-_Catalog"],"Friendly Name":"7500"}

{"Number of Flutes":"2","Drilling L/D Ratio (xD)":["4","8"],"Shank Diameter - Metric (d)":["2.5","3.27","4.1","4.86","5.62","6.37","7.96","9.55","11.13","12.72"],"Diameter - Inch (D)":["0.0985","0.129","0.1615","0.1915","0.2215","0.25","0.3125","0.375","0.4375","0.5"],"Overall Length - Metric (L)":["50.8","76.2","101.6","88.9","139.7","152.4","127"],"Flute Length - Metric (FL)":["15.2","20.3","25.4","27.9","48.2","33","38.1","63.5","58.4","96.5","66","76.2"],"Taper Length - Metric (I)":["3.8","4.8","5.9","7","8","9","11.2","13.4","15.5","17.7"],"Diameter - Metric (D)":["2.5019","3.2766","4.1021","4.8641","5.6261","6.3754","7.9629","9.5504","11.1379","12.7254"],"List Name":"AERO-STAD","Diameter - Wire Gage (D)":["40","30","20","11","2"],"Substrate":"Carbide","Web Literature 1":["8002024CA-DR,122|8002024CA-DRT,20","8002024CA-DR,258|8002024CA-DRT,20"],"Shank Tolerance":"h6","Surface Treatment":"DIAMOND","Notes":"Drills are oversize over nominal. Tri-Flat Shank available upon request.","Web Literature 2":"800212CA-V4","Benefit 2":"Eliminates the pull-up entrance delamination","Benefit 3":"Ensures smoother and sharper cutting edges providing up to 50 times longer tool life","Brand":"EXOPRO","Web Literature 4":"800387CA","Units":"Inch","Coolant Thru":"No","Feature 3":"OSG's patented diamond coating","Short Description":"Premium High Performance Diamond Coated Carbide Triple Angle Drill","Carbon Fiber (CFRP)":"Other; Best","Carbon/Carbon":"Other; Best","Honeycomb: CFRP/AI":"Other; Best","Honeycomb: CFRP/Nomex":"Other; Best","Honeycomb: GFRP/Nomex":"Other; Best","Carbon Fiber / Aluminum Stack":"Other; Good","Glass Fiber (GFRP)":"Other; Good","Honeycomb: AI/AI":"Other; Good","Benefit 1":"Reduces push-out exit delamination","Cutting Direction":"RH","View Speed and Feed Page":"Here","View Catalog Page":"Here","Feature 2":"Straight-flute","Length of Cut - Specification":["STUB","TAPER"],"Point Thinning":"Triple Angle","Product Overview":"Triple Angle","Feature 1":"Triple angle geometry","Cutting Diameter Tolerance - Inch":"+0 / -0.001","Full Description":"The EXOPRO® AERO-STAD is a diamond coated triple angle drill for composites. It is specifically designed to eliminate fiber breakout and delamination issues on both the entry and exit of drilled holes. The drill features OSG's patented diamond coating.","Helix Angle - Degree":"0","Point Angle - Degree (α)":"120","Diameter - Fractional Size (D)":["1/4","5/16","3/8","7/16","1/2"],"Diameter-Sizes":"0.0985\" - 12.7254mm","Flute-Sizes":"15.2mm - 96.5mm","Neck-Sizes":"-","Taper-Sizes":"3.8mm - 17.7mm","Overall-Sizes":"50.8mm - 152.4mm","Shank-Sizes":"2.5mm - 12.72mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FOthers%2FList%207501/Composites_-_Drill_-_EXOPRO_AERO-STAD_-_List_7501_-_Catalog","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FComposite%20Drills%2FList%207501/Composites_-_Drill_-_EXOPRO_AERO-STAD_-_List_7501_-_Catalog","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FOthers%2FList%207501/Composites_-_Drill_-_EXOPRO_AERO-STAD_-_List_7501_-_Extra_1","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FComposite%20Drills%2FList%207501/Composites_-_Drill_-_EXOPRO_AERO-STAD_-_List_7501_-_Angle_1","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FOthers%2FList%207501/Composites_-_Drill_-_EXOPRO_AERO-STAD_-_List_7501_-_Extra_2","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FOthers%2FList%207501/Composites_-_Drill_-_EXOPRO_AERO-STAD_-_List_7501_-_Extra_3","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FOthers%2FList%207501/Composites_-_Drill_-_EXOPRO_AERO-STAD_-_List_7501_-_Extra_6","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FComposite%20Drills%2FList%207501/Composites_-_Drill_-_EXOPRO_AERO-STAD_-_List_7501_-_Face_1","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FComposite%20Drills%2FList%207501/Composites_-_Drill_-_EXOPRO_AERO-STAD_-_List_7501_-_Extra_5","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FComposite%20Drills%2FList%207501/Composites_-_Drill_-_EXOPRO_AERO-STAD_-_List_7501_-_Extra_2","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FOthers%2FList%207501/Composites_-_Drill_-_EXOPRO_AERO-STAD_-_List_7501_-_Face_1","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FOthers%2FList%207501/Composites_-_Drill_-_EXOPRO_AERO-STAD_-_List_7501_-_Extra_5","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FOthers%2FList%207501/Composites_-_Drill_-_EXOPRO_AERO-STAD_-_List_7501_-_Side_1"],"Friendly Name":"7501"}

{"Number of Flutes":"2","Drilling L/D Ratio (xD)":"4","Shank Diameter - Metric (d)":["2.5","3.27","4.1","4.86","5.62","6.37","7.96","9.55","11.13","12.72"],"Diameter - Inch (D)":["0.0985","0.129","0.1615","0.1915","0.2215","0.25","0.3125","0.375","0.4375","0.5"],"Overall Length - Metric (L)":["50.8","76.2","88.9","101.6","127"],"Flute Length - Metric (FL)":["15.2","20.3","25.4","27.9","33","38.1","48.2","58.4","66","76.2"],"Taper Length - Metric (I)":["7","9","11.2","13.2","15.2","17.2","21.4","25.6","29.8","34"],"Diameter - Metric (D)":["2.5019","3.2766","4.1021","4.8641","5.6261","6.3754","7.9629","9.5504","11.1379","12.7254"],"List Name":"AERO-LHX","Diameter - Wire Gage (D)":["40","30","20","11","2"],"Substrate":"Carbide","Helix Angle - Degree":"5","Web Literature 1":["8002024CA-DR,122|8002024CA-DRT,20","8002024CA-DR,236|8002024CA-DRT,20","8002024CA-DR,224|8002024CA-DRT,20"],"Shank Tolerance":"h6","Surface Treatment":"DIAMOND","Notes":"Drills are oversize over nominal.","Web Literature 2":"800212CA-V4","Benefit 3":"Ensures smoother and sharper cutting edges providing up to 50 times longer tool life","Brand":"EXOPRO","Web Literature 4":"800387CA","Product Overview":"Low helix","Feature 2":"Low helix style","Units":"Inch","Coolant Thru":"No","Feature 3":"OSG's patented diamond coating","Short Description":"Premium High Performance Diamond Coated Carbide Low Helix Drill","Benefit 2":"Provides sharper cutting edge to help shear tough fibers","Carbon Fiber (CFRP)":"Other; Best","Carbon/Carbon":"Other; Best","Honeycomb: CFRP/AI":"Other; Best","Honeycomb: CFRP/Nomex":"Other; Best","Honeycomb: GFRP/Nomex":"Other; Best","Glass Fiber (GFRP)":"Other; Good","Benefit 1":"Reduces push-out exit delamination","Cutting Direction":"RH","View Speed and Feed Page":"Here","View Catalog Page":"Here","Helix Direction":"RH","Length of Cut - Specification":"STUB","Feature 1":"Triple angle geometry","Cutting Diameter Tolerance - Inch":"+0 / -0.001","Full Description":"The EXOPRO® AERO-LHX is a diamond coated low helix drill for composites. It is specifically designed for tough laminates. It eliminates uncut fibers and delamination when other drills are unable to properly cut fibers. The drill features triple angle geom","Point Angle - Degree (α)":"130","Diameter - Fractional Size (D)":["1/4","5/16","3/8","7/16","1/2"],"Diameter-Sizes":"0.0985\" - 12.7254mm","Flute-Sizes":"15.2mm - 76.2mm","Neck-Sizes":"-","Taper-Sizes":"7mm - 34mm","Overall-Sizes":"50.8mm - 127mm","Shank-Sizes":"2.5mm - 12.72mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FOthers%2FList%207520/Composites_-_Drill_-_EXOPRO_AERO-LHX_-_List_7520_-_Catalog","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FComposite%20Drills%2FList%207520/Composites_-_Drill_-_EXOPRO_AERO-LHX_-_List_7520_-_Catalog","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FOthers%2FList%207520/Composites_-_Drill_-_EXOPRO_AERO-LHX_-_List_7520_-_Extra_1","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FOthers%2FList%207520/Composites_-_Drill_-_EXOPRO_AERO-LHX_-_List_7520_-_Extra_3","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FComposite%20Drills%2FList%207520/Composites_-_Drill_-_EXOPRO_AERO-LHX_-_List_7520_-_Face_2","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FComposite%20Drills%2FList%207520/Composites_-_Drill_-_EXOPRO_AERO-LHX_-_List_7520_-_Extra_4","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FOthers%2FList%207520/Composites_-_Drill_-_EXOPRO_AERO-LHX_-_List_7520_-_Face_2","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FComposite%20Drills%2FList%207520/Composites_-_Drill_-_EXOPRO_AERO-LHX_-_List_7520_-_Extra_1","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FOthers%2FList%207520/Composites_-_Drill_-_EXOPRO_AERO-LHX_-_List_7520_-_Extra_4","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FOthers%2FList%207520/Composites_-_Drill_-_EXOPRO_AERO-LHX_-_List_7520_-_Side_1"],"Friendly Name":"7520"}

{"Number of Flutes":"2","Drilling L/D Ratio (xD)":"4","Shank Diameter - Metric (d)":["2.5","3.27","4.1","4.86","5.62","6.37","7.96","9.55","11.13","12.72"],"Diameter - Inch (D)":["0.0985","0.129","0.1615","0.1915","0.2215","0.25","0.3125","0.375","0.4375","0.5"],"Overall Length - Metric (L)":["50.8","76.2","101.6","152.4"],"Flute Length - Metric (FL)":["15.2","20.3","25.4","27.9","33","38.1","48.2","58.4","66","76.2"],"Diameter - Metric (D)":["2.5019","3.2766","4.1021","4.8641","5.6261","6.3754","7.9629","9.5504","11.1379","12.7254"],"List Name":"AERO-S","Diameter - Wire Gage (D)":["40","30","20","11","2"],"Helix Angle - Degree":"40","Substrate":"Carbide","Web Literature 1":["8002024CA-DR,122|8002024CA-DRT,21","8002024CA-DR,225|8002024CA-DRT,21","8002024CA-DR,245|8002024CA-DRT,21"],"Shank Tolerance":"h6","Surface Treatment":"DIAMOND","Feature 2":"Drill point designed for cutting stacks","Notes":"Drills are oversize over nominal.","Web Literature 2":"800212CA-V4","Feature 1":"High helix angle","Product Overview":"High Helix, Stack Drill","Benefit 4":"Ensures smoother and sharper cutting edges providing up to 50 times longer tool life","Brand":"EXOPRO","Web Literature 4":"800387CA","Units":"Inch","Coolant Thru":"No","Feature 4":"OSG's patented diamond coating","Short Description":"Premium High Performance Diamond Coated Carbide High Helix Stack Drill","Benefit 2":"Provides optimal cutting geometry for cutting multiple material stacks","Carbon Fiber (CFRP)":"Other; Best","Carbon Fiber / Aluminum Stack":"Other; Best","Glass Fiber (GFRP)":"Other; Best","Honeycomb: AI/AI":"Other; Best","Honeycomb: CFRP/AI":"Other; Best","Honeycomb: CFRP/Nomex":"Other; Good","Honeycomb: GFRP/Nomex":"Other; Good","Benefit 3":"Reduces thrust and improves chip evacuation","Cutting Direction":"RH","View Speed and Feed Page":"Here","View Catalog Page":"Here","Helix Direction":"RH","Length of Cut - Specification":"STUB","Cutting Diameter Tolerance - Inch":"+0 / -0.001","Full Description":"The EXOPRO® AERO-S is a high helix diamond coated drill designed for composites and metal stack materials. It is specifically developed to shear through tough fibers. It features OSG's patented diamond coating and unique geometries such as high helix to a","Feature 3":"Thin web and wide flutes","Benefit 1":"Shears through tough fibers","Point Angle - Degree (α)":"120","Diameter - Fractional Size (D)":["1/4","5/16","3/8","7/16","1/2"],"Diameter-Sizes":"0.0985\" - 12.7254mm","Flute-Sizes":"15.2mm - 76.2mm","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"50.8mm - 152.4mm","Shank-Sizes":"2.5mm - 12.72mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FJobber%20Drills%2FList%207530/Composites_-_Drill_-_EXOPRO_AERO-S_-_List_7530_-_Catalog","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FComposite%20Drills%2FList%207530/Composites_-_Drill_-_EXOPRO_AERO-S_-_List_7530_-_Catalog"],"Friendly Name":"7530"}

{"Number of Flutes":"2","Drilling L/D Ratio (xD)":"4","Shank Diameter - Metric (d)":["2.5","3.27","4.1","4.86","5.62","6.37","7.96","9.55","11.13","12.72"],"Diameter - Inch (D)":["0.0985","0.129","0.1615","0.1915","0.2215","0.25","0.3125","0.375","0.4375","0.5"],"Overall Length - Metric (L)":["50.8","76.2","101.6","152.4"],"Flute Length - Metric (FL)":["15.2","20.3","25.4","27.9","33","38.1","48.2","58.4","66","76.2"],"Diameter - Metric (D)":["2.5019","3.2766","4.1021","4.8641","5.6261","6.3754","7.9629","9.5504","11.1379","12.7254"],"List Name":"AERO-H","Diameter - Wire Gage (D)":["40","30","20","11","2"],"Helix Angle - Degree":"40","Substrate":"Carbide","Web Literature 1":"8002024CA-DR,122|8002024CA-DRT,22","Shank Tolerance":"h6","Feature 2":"Corner radius and end gash","Surface Treatment":"DIAMOND","Notes":"Drills are oversize over nominal.","Web Literature 2":"800212CA-V4","Benefit 3":"Ensures smoother and sharper cutting edges providing up to 50 times longer tool life","Brand":"EXOPRO","Web Literature 4":"800387CA","Benefit 1":"Improves chip evacuation","Units":"Inch","Coolant Thru":"No","Feature 1":"Parabolic flute form","Feature 3":"OSG's patented diamond coating","Short Description":"Premium High Performance Diamond Coated Carbide Stack Drill for All Stacks","Carbon Fiber (CFRP)":"Other; Best","Carbon Fiber / Al / Ti / CRES Stack":"Other; Best","Carbon Fiber / Titanium Stack":"Other; Best","Carbon Fiber / Aluminum Stack":"Other; Good","Benefit 2":"Resists chipping","Cutting Direction":"RH","View Speed and Feed Page":"Here","View Catalog Page":"Here","Helix Direction":"RH","Length of Cut - Specification":"STUB","Cutting Diameter Tolerance - Inch":"+0 / -0.001","Full Description":"The EXOPRO® AERO-H is a diamond coated carbide drill specifically designed for composite/metal stack applications. It features high helix and parabolic flute form for improved chip evacuation as well as corner radius and end gash to resist chipping.","Product Overview":"Stack Drill for All Stacks","Point Angle - Degree (α)":"140","Diameter - Fractional Size (D)":["1/4","5/16","3/8","7/16","1/2"],"Diameter-Sizes":"0.0985\" - 12.7254mm","Flute-Sizes":"15.2mm - 76.2mm","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"50.8mm - 152.4mm","Shank-Sizes":"2.5mm - 12.72mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FJobber%20Drills%2FList%207532/Composites_-_Drill_-_EXOPRO_AERO-H_-_List_7532_-_Catalog","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FJobber%20Drills%2FList%207532/Composites_-_Drill_-_EXOPRO_AERO-H_-_List_7532_-_Angle_1","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FComposite%20Drills%2FList%207532/Composites_-_Drill_-_EXOPRO_AERO-H_-_List_7532_-_Catalog","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FComposite%20Drills%2FList%207532/Composites_-_Drill_-_EXOPRO_AERO-H_-_List_7532_-_Extra_2","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FJobber%20Drills%2FList%207532/Composites_-_Drill_-_EXOPRO_AERO-H_-_List_7532_-_Extra_2","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FComposite%20Drills%2FList%207532/Composites_-_Drill_-_EXOPRO_AERO-H_-_List_7532_-_Face_1","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FComposite%20Drills%2FList%207532/Composites_-_Drill_-_EXOPRO_AERO-H_-_List_7532_-_Extra_1","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FJobber%20Drills%2FList%207532/Composites_-_Drill_-_EXOPRO_AERO-H_-_List_7532_-_Extra_3","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FJobber%20Drills%2FList%207532/Composites_-_Drill_-_EXOPRO_AERO-H_-_List_7532_-_Extra_5","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FJobber%20Drills%2FList%207532/Composites_-_Drill_-_EXOPRO_AERO-H_-_List_7532_-_Face_1","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FJobber%20Drills%2FList%207532/Composites_-_Drill_-_EXOPRO_AERO-H_-_List_7532_-_Side_1","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FJobber%20Drills%2FList%207532/Composites_-_Drill_-_EXOPRO_AERO-H_-_List_7532_-_Side_2"],"Friendly Name":"7532"}

{"Number of Flutes":"3","Drilling L/D Ratio (xD)":"3","Overall Length - Metric (L)":["38.1"],"Shank Diameter - Metric (d)":["2.48","3.26","4.08","4.85","6.35"],"Diameter - Inch (D)":["0.098","0.1285","0.161","0.191","0.25"],"Flute Length - Metric (FL)":["12.7","15.8"],"Diameter - Metric (D)":["2.49","3.26","4.09","4.85","6.35"],"Helix Angle - Degree":"30","Feature 1":"3-flute design","Diameter - Wire Gage (D)":["40","30","20","11"],"Substrate":"Carbide","Web Literature 1":"8002024CA-DR,283|8002024CA-DRT,23","Shank Tolerance":"h6","Web Literature 2":"800212CA-V4","Product Overview":"Hand Drill","Short Description":"High Performance Carbide Drills for Hand Operations","Web Literature 4":"800387CA","Brand":"HY-PRO CARB","Benefit 1":"Improves stability and increases productivity","List Name":"NEPTUNE","Units":"Inch","Coolant Thru":"No","Benefit 2":"Provides sharper cutting edge","Carbon Fiber (CFRP)":"Other; Best","Carbon Fiber / Al / Ti / CRES Stack":"Other; Best","Carbon Fiber / Aluminum Stack":"Other; Best","Carbon Fiber / Titanium Stack":"Other; Best","View Catalog Page":"Here","View Speed and Feed Page":"Here","Cutting Direction":"RH","Feature 2":"TiALN coating","Notes":"Tri-Flat shank available upon request.","Length of Cut - Specification":"STUB","Helix Direction":"RH","Cutting Diameter Tolerance - Inch":"+0 / -0.001","Full Description":"The HY-PRO CARB® NEPTUNE® is an innovative hand drill designed for a wide variety of tough to machine alloys. The NEPTUNE® features a 3-flute design which provides improved stability and productivity.","Surface Treatment":"TiAlN","Point Angle - Degree (α)":"150","Diameter - Fractional Size (D)":["1/4"],"Pilot Diameter - Metric (Da)":"4.09","Diameter-Sizes":"0.098\" - 6.35mm","Flute-Sizes":"12.7mm - 15.8mm","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"38.1mm","Shank-Sizes":"2.48mm - 6.35mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FJobber%20Drills%2FList%20HP700/Composites_-_Drill_-_HY-PRO_CARB_NEPTUNE_-_List_HP700_-_Catalog","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FComposite%20Drills%2FList%20HP700/Composites_-_Drill_-_HY-PRO_CARB_NEPTUNE_-_List_HP700_-_Catalog","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FJobber%20Drills%2FList%20HP700/Composites_-_Drill_-_HY-PRO_CARB_NEPTUNE_-_List_HP700_-_Extra_1","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FJobber%20Drills%2FList%20HP700/Composites_-_Drill_-_HY-PRO_CARB_NEPTUNE_-_List_HP700_-_Extra_3","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FComposite%20Drills%2FList%20HP700/Composites_-_Drill_-_HY-PRO_CARB_NEPTUNE_-_List_HP700_-_Extra_6","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FComposite%20Drills%2FList%20HP700/Composites_-_Drill_-_HY-PRO_CARB_NEPTUNE_-_List_HP700_-_Extra_4","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FJobber%20Drills%2FList%20HP700/Composites_-_Drill_-_HY-PRO_CARB_NEPTUNE_-_List_HP700_-_Extra_6","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FComposite%20Drills%2FList%20HP700/Composites_-_Drill_-_HY-PRO_CARB_NEPTUNE_-_List_HP700_-_Extra_8"],"Friendly Name":"HP700"}