MILLING - SOLID - MILLING - BALL NOSE

2010

2010

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%202010/End_Mills_-_End_Mill_-_EXOCARB_AERO_Blizzard_-_List_2010_-_Catalog"],"Number of Flutes":"2","Corner Radius - Inch (R)":["0.0625","0.09375","0.125","0.15625","0.1875","0.21875","0.25","0.3125","0.375","0.5"],"Diameter - Inch (D)":["0.125","0.1875","0.25","0.3125","0.375","0.4375","0.5","0.625","0.75","1"],"Cutting Diameter Tolerance - Inch":"+0 / -0.002","Diameter - Fractional Size (D)":["1/8","3/16","1/4","5/16","3/8","7/16","1/2","5/8","3/4","1"],"Shank Diameter - Inch (d)":["0.125","0.1875","0.25","0.3125","0.375","0.4375","0.5","0.625","0.75","1"],"Product Overview":"2-Flute, Ball, Regular Length, Bright","Benefit 4":"3 - 5 times tool life","Overall Length - Inch (L)":["1.5","2","2.5","2.75","3","3.5","4","5"],"Length of Cut - Inch (Lc)":["0.375","0.5625","0.75","0.8125","1","1.25","1.625","2"],"Helix Angle - Degree":"30","Benefit 2":"Enhances tool life by reducing BUE","List Name":"AERO BLIZZARD","End Cut Type":"Ball Nose","Web Literature 1":"8002024CA-EM,290|8002024CA-EMT,157","Surface Treatment":"BRIGHT","Substrate":"Carbide","Benefit 3":"Ideal for rough and finish contouring","Units":"Inch","Web Literature 4":"800388CA","Cutting Type":"Center Cutting","Benefit 1":"Larger depth of cut and maximum feed per tooth","Shank Tolerance":"h6","Feature 3":"DLC available on request","View Catalog Page":"Here","View Speed and Feed Page":"Here","Weldon Flat":"No","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Mill Type":"Single End","Full Description":"Performance Carbide Ball Mills For Aluminum","Short Description":"Performance Carbide Ball Mills For Aluminum","Feature 1":"Refined geometry","Length of Cut - Specification":"REGULAR","Cutting Direction":"RH","Helix Direction":"RH","Feature 2":"Ultra smooth Flutes","Diameter-Sizes":"1/8\" - 1\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"1.5\" - 5\"","Shank-Sizes":"0.125\" - 1\"","Friendly Name":"2010","CategoryBrand":"EXOCARB"}
2915

2915

{"Number of Flutes":"2","Neck Diameter - Metric (d1)":["0.95","1.95","0.93","0.55"],"Corner Radius - Metric (R)":["0.5","1","0.3"],"Overall Length - Metric (L)":["50","40"],"Shank Diameter - Metric (d)":["4","3"],"Neck Length - Metric (L1)":["16","20","12","6"],"Diameter - Metric (D)":["1","2","0.6"],"Helix Angle - Degree":"30","Length of Cut - Metric (Lc)":["0.8","1.6","0.9","0.5"],"End Cut Type":["Ball Nose"],"PEEK":"Other; Best","Wax/PMMA":"Other; Best","Zirconia":"Other; Good","Substrate":"Carbide","Cutting Type":"Center Cutting","Type (feature)":"Long Neck","Surface Treatment":"DLC","List Name":["DLC-LN-EBD RO","DLC-LN-EBD"],"Coolant Thru":"No","Units":"Metric","Weldon Flat":"No","Mill Type":"Single End","Length of Cut - Specification":"STUB","Cutting Direction":"RH","Radius Tolerance - Metric":["+/- 0.010","+/- 0.008"],"Helix Direction":"RH","Compatible Machine":["Roland","vhf"],"STP Drawing":["Download","Download","Download","Download","Download","Download"],"DXF Drawing":["Download","Download","Download","Download","Download","Download"],"CategoryBrand":"EXOCARB","Diameter-Sizes":"0.6mm - 2mm","Flute-Sizes":"-","Neck-Sizes":"6mm - 20mm","Taper-Sizes":"-","Overall-Sizes":"40mm - 50mm","Shank-Sizes":"3mm - 4mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%202915/End_Mills_-_End_Mill_-_DLC-LN-EBD_-_List_2915_-_R1x17_2_-_1600","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%202915/DLC-LN-EBD_VH"],"Friendly Name":"2915"}
3430

3430

{"Number of Flutes":"4","Diameter - Inch (D)":["0.125","0.1875","0.25","0.3125","0.375","0.5"],"Type":"1","Diameter - Fractional Size (D)":["1/8","3/16","1/4","5/16","3/8","1/2"],"Shank Diameter - Inch (d)":["0.125","0.1875","0.25","0.3125","0.375","0.5"],"Length of Cut - Inch (Lc)":["0.25","0.375","0.5","0.625","0.75","0.875"],"Overall Length - Inch (L)":["2","2.5","3.5","4","4.375"],"Helix Angle - Degree":"30","End Cut Type":["Ball Nose"],"Hardened Steels : 35 HRC":"H; Best","Hardened Steels : 35-45 HRC":"H; Best","Alloy Steels : 4140; 4340":"P; Best","Units":"Inch","Substrate":"Carbide","Die Steels":"P; Best","Cast Iron":"K; Best","High Carbon Steel : 1065":"P; Best","Cutting Type":"Center Cutting","Low Carbon Steel : 1010; 1018":"P; Best","Hardened Steels : 45-50 HRC":"H; Good","Medium Carbon Steel : 1035; 1045":"P; Best","Stainless Steels : 17-4PH":"M; Best","Shank Tolerance":"h6","Stainless Steels : 300":"M; Best","Stainless Steels : 400":"M; Best","Aluminum : Casting":"N; Good","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Good","Mill Type":"Single End","Cutting Direction":"RH","Helix Direction":"RH","Nickel Alloy : Inconel":"S; Good","Surface Treatment":"WXL","Titanium : 6AL4V (30HRC)":"S; Good","Cutting Diameter Tolerance - Inch":"+0 / -0.00078","Radius Tolerance - Inch":["+/- 0.00027","+/- 0.00039"],"L/D Ratio":["2","1.75"],"Length of Cut - Specification":["REGULAR","STUB"],"Weldon Flat":"No","Benefit 1":"The hardest most wear resistant carbide possible for Incredible Wear Resistance.","Benefit 2":"High accuracy all but eliminates need for benching and rework for mold makers.","Benefit 3":"Tools utilize thicker core diameters for Ultimate Strength and Rigidity.","Benefit 4":"Higher coating oxidation temp & hardness dramatically improve wear resistance.","Feature 1":"Ultra-Fine Micro-grain Carbide","Feature 2":"High Precision Geometry","Feature 3":"High Strength Core Diameter","Feature 4":"WXL coating","Full Description":"EXOCARB® WXL end mills are the new industry standard for hard milling. Everything about WXL is designed for rigidity and performance in wide variety of materials and a wide variety of milling applications. Substrates, geometry, and proprietary WXL coating are all specifically tailored for nonferrous materials, mild steels, and steels up to 50HRC.","List Name":"EXOCARB WXL-EBM","Product Overview":"Carbide, 4 Flute, Ball End, Stub & Regular Length, Inch","Short Description":"Premium Performance Carbide End Mills with OSG’s Proprietary WXL® Coating","Web Literature 2":"800438CA","View Catalog Page":"Here","View Speed and Feed Page":"Here","STP Drawing":["Download","Download","Download","Download","Download","Download"],"DXF Drawing":["Download","Download","Download","Download","Download","Download"],"CategoryBrand":"EXOCARB","Diameter-Sizes":"1/8\" - 0.5\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"2\" - 4.375\"","Shank-Sizes":"0.125\" - 0.5\"","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%203430/End_Mills_-_End_Mill_-_EXOCARB_WXL-EBM_-_List_3430","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202430/SEP-EL_-_Group_-_001"],"Friendly Name":"3430"}
3530

3530

{"Length of Cut - Metric (Lc)":["2","3","5","4","9","12","15","18"],"Number of Flutes":"4","Neck Diameter - Metric (d1)":["0.95","1.45","1.95","2.45","2.85","3.85","4.85"],"Overall Length - Metric (L)":["50","60","70","80","90"],"Shank Diameter - Metric (d)":["4","6","8","10","12"],"Type":["1","2"],"Neck Length - Metric (L1)":["8","12","12.1","12.2"],"Non-Taper Neck Length - Metric (L2)":["2","3","5","4","9","12","15","18"],"Diameter - Metric (D)":["1","1.5","2","2.5","3","4","5","6","8","10","12"],"Helix Angle - Degree":"30","End Cut Type":["Ball Nose"],"Hardened Steels : 35 HRC":"H; Best","Hardened Steels : 35-45 HRC":"H; Best","Alloy Steels : 4140; 4340":"P; Best","Substrate":"Carbide","Die Steels":"P; Best","Cast Iron":"K; Best","High Carbon Steel : 1065":"P; Best","Cutting Type":"Center Cutting","Low Carbon Steel : 1010; 1018":"P; Best","Hardened Steels : 45-50 HRC":"H; Good","Medium Carbon Steel : 1035; 1045":"P; Best","Stainless Steels : 17-4PH":"M; Best","Shank Tolerance":"h6","Stainless Steels : 300":"M; Best","Stainless Steels : 400":"M; Best","Aluminum : Casting":"N; Good","Units":"Metric","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Good","Mill Type":"Single End","Cutting Direction":"RH","Helix Direction":"RH","Nickel Alloy : Inconel":"S; Good","Surface Treatment":"WXL","Titanium : 6AL4V (30HRC)":"S; Good","Cutting Diameter Tolerance - Metric":"+0 / -0.020","Radius Tolerance - Metric":["+/- 0.005","+/- 0.007","+/- 0.010"],"Interference Angle - Degree (α)":["11.85","10.15","10.64","9.57","8.15","5.65","2.95"],"Effective Neck Length by Incline Angle 0.5° - Metric":["2.13","2.64","4.19","5.32","6.44","8.49","10.54"],"Effective Neck Length by Incline Angle 1° - Metric":["2.19","2.71","4.3","5.4","6.61","8.71","10.82"],"Effective Neck Length by Incline Angle 1.5° - Metric":["2.25","2.78","4.42","5.52","6.79","8.96","11.12"],"Effective Neck Length by Incline Angle 2° - Metric":["2.32","2.85","4.55","5.64","7","9.22","11.45"],"Effective Neck Length by Incline Angle 3° - Metric":["2.46","3.02","4.85","5.81","7.45","9.81"],"L/D Ratio":["2","1","1.5"],"Length of Cut - Specification":["REGULAR","STUB"],"Weldon Flat":"No","Benefit 1":"The hardest most wear resistant carbide possible for Incredible Wear Resistance.","Benefit 2":"High accuracy all but eliminates need for benching and rework for mold makers.","Benefit 3":"Tools utilize thicker core diameters for Ultimate Strength and Rigidity.","Benefit 4":"Higher coating oxidation temp & hardness dramatically improve wear resistance.","Feature 1":"Ultra-Fine Micro-grain Carbide","Feature 2":"High Precision Geometry","Feature 3":"High Strength Core Diameter","Feature 4":"WXL coating","Full Description":"EXOCARB® WXL end mills are the new industry standard for hard milling. Everything about WXL is designed for rigidity and performance in wide variety of materials and a wide variety of milling applications. Substrates, geometry, and proprietary WXL coating are all specifically tailored for nonferrous materials, mild steels, and steels up to 50HRC.","List Name":"EXOCARB WXL-EBM","Product Overview":"Carbide, 4 Flute, Ball End, Stub & Regular Length, Metric","Short Description":"Premium Performance Carbide End Mills with OSG’s Proprietary WXL® Coating","Web Literature 2":"800438CA","View Catalog Page":"Here","View Speed and Feed Page":"Here","STP Drawing":["Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download"],"DXF Drawing":["Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download"],"CategoryBrand":"EXOCARB","Diameter-Sizes":"1mm - 12mm","Flute-Sizes":"-","Neck-Sizes":"8mm - 12.2mm","Taper-Sizes":"-","Overall-Sizes":"50mm - 90mm","Shank-Sizes":"4mm - 12mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%203530/End_Mills_-_End_Mill_-_EXOCARB_WXL-EBM_-_List_3530"],"Friendly Name":"3530"}
3610

3610

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%203610/End_Mills_-_End_Mill_-_EXOCARB_WXL_-_List_3610_-_Catalog"],"Number of Flutes":"2","Corner Radius - Inch (R)":["0.015625","0.03125","0.046875","0.0625","0.09375","0.125","0.15625","0.1875","0.25","0.078125"],"Diameter - Inch (D)":["0.03125","0.0625","0.09375","0.125","0.1875","0.25","0.3125","0.375","0.5","0.15625"],"Diameter - Fractional Size (D)":["1/32","1/16","3/32","1/8","3/16","1/4","5/16","3/8","1/2","5/32"],"Product Overview":"2 Flute, Regular Length, WXL","Length of Cut - Inch (Lc)":["0.03125","0.0625","0.09375","0.125","0.1875","0.25","0.3125","0.375","0.5","0.15625"],"Shank Diameter - Inch (d)":["0.25","0.3125","0.375","0.5"],"Helix Angle - Degree":"30","Overall Length - Inch (L)":["2.5","3","4"],"Web Literature 4":"800388CA","Feature 2":"High Precision geometry - Ball End Mills have +/-5um radius tolerance","Feature 3":"High strength core diameter","Benefit 4":"Higher coating oxidation temp & hardness dramatically improve wear resistance.","Web Video 1":"https://youtu.be/dNdGq78-DvA","Web Literature 1":"8002024CA-EM,272|8002024CA-EMT,141","End Cut Type":"Ball Nose","Hardened Steels : 35 HRC":"H; Best","Web Literature 2":"800304CA","Hardened Steels : 35-45 HRC":"H; Best","Alloy Steels : 4140; 4340":"P; Best","Units":"Inch","Substrate":"Carbide","Web Literature 3":"800366CA|800365CA","Hardened Steels : 45-50 HRC":"H; Best","Die Steels":"P; Best","Cast Iron":"K; Best","High Carbon Steel : 1065":"P; Best","Cutting Type":"Center Cutting","Low Carbon Steel : 1010; 1018":"P; Best","Hardened Steels : 50-70 HRC":"H; Good","Medium Carbon Steel : 1035; 1045":"P; Best","Stainless Steels : 17-4PH":"M; Best","Shank Tolerance":"h6","Stainless Steels : 300":"M; Best","Benefit 2":"High accuracy all but eliminates need for benching and rework for mold makers.","Stainless Steels : 400":"M; Best","View Catalog Page":"Here","View Speed and Feed Page":"Here","Aluminum : Casting":"N; Good","Weldon Flat":"No","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Good","Mill Type":"Single End","Full Description":"Premium High Performance Carbide Ball Mills for Pre-hardened & Hardened Steels","Short Description":"Premium High Performance Carbide Ball Mills for Pre-hardened & Hardened Steels","Cutting Direction":"RH","Length of Cut - Specification":"STUB","Benefit 1":"The hardest ost wear resistant carbide possible for incredible wear resistance.","Helix Direction":"RH","Radius Tolerance - Inch":["+/- 0.0002","+0.0001 / -0.0003","+/- 0.0004"],"Benefit 3":"Tools utilize thicker core diameters for the ultimate in strength and rigidity.","Feature 1":"Ultra-fine micrograin carbide","Nickel Alloy : Inconel":"S; Good","Surface Treatment":"WXL","Feature 4":"WXL coating - +1100 Celsius Oxidation Temp. & +3100Hv in hardness","List Name":"WXL-EBD","Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"1/32\" - 0.5\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"2.5\" - 4\"","Shank-Sizes":"0.25\" - 0.5\"","Friendly Name":"3610","CategoryBrand":"EXOCARB"}
3690

3690

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%203690/End_Mills_-_End_Mill_-_EXOCARB_WXL_-_List_3690_-_Catalog"],"Number of Flutes":"2","Corner Radius - Inch (R)":["0.007812","0.015625","0.03125","0.046875","0.0625","0.09375","0.125"],"Neck Diameter - Inch (d1)":["0.013385","0.029133","0.060629","0.091732","0.123228","0.185433","0.248031"],"Neck Length - Inch (L1)":["0.046875","0.09375","0.15625","0.3125","0.40625","0.625","0.8125","0.46875","0.9375","1.40625","1.25","1.875","2"],"Diameter - Inch (D)":["0.015625","0.03125","0.0625","0.09375","0.125","0.1875","0.25"],"Diameter - Fractional Size (D)":["1/64","1/32","1/16","3/32","1/8","3/16","1/4"],"Shank Diameter - Inch (d)":["0.125","0.25"],"Product Overview":"2 FLute, Regular Length, Long Neck, Ball End, Rib Processing, WXL","Length of Cut - Inch (Lc)":["0.015625","0.03125","0.0625","0.09375","0.125","0.1875","0.25"],"Helix Angle - Degree":"30","Overall Length - Inch (L)":["2.5","3","2.875","3.125","3.75","3.5","4","4.5"],"Web Literature 4":"800388CA","Feature 2":"High Precision geometry - Ball End Mills have +/-5um radius tolerance","Feature 3":"High strength core diameter","Benefit 4":"Higher coating oxidation temp & hardness dramatically improve wear resistance.","Web Video 1":"https://youtu.be/dNdGq78-DvA","Web Literature 1":"8002024CA-EM,274|8002024CA-EMT,143","End Cut Type":"Ball Nose","Hardened Steels : 35 HRC":"H; Best","Web Literature 2":"800304CA","Hardened Steels : 35-45 HRC":"H; Best","Alloy Steels : 4140; 4340":"P; Best","Units":"Inch","Substrate":"Carbide","Web Literature 3":"800366CA|800365CA","Hardened Steels : 45-50 HRC":"H; Best","Die Steels":"P; Best","Cast Iron":"K; Best","High Carbon Steel : 1065":"P; Best","Cutting Type":"Center Cutting","Low Carbon Steel : 1010; 1018":"P; Best","Hardened Steels : 50-70 HRC":"H; Good","Type (feature)":"Long Neck","Medium Carbon Steel : 1035; 1045":"P; Best","Stainless Steels : 17-4PH":"M; Best","Shank Tolerance":"h6","Stainless Steels : 300":"M; Best","Benefit 2":"High accuracy all but eliminates need for benching and rework for mold makers.","Stainless Steels : 400":"M; Best","View Catalog Page":"Here","View Speed and Feed Page":"Here","Aluminum : Casting":"N; Good","Weldon Flat":"No","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Good","Mill Type":"Single End","Full Description":"Premium High Performance Carbide Ball Mills for Pre-hardened & Hardened Steels","Short Description":"Premium High Performance Carbide Ball Mills for Pre-hardened & Hardened Steels","Cutting Direction":"RH","Length of Cut - Specification":"STUB","Benefit 1":"The hardest ost wear resistant carbide possible for incredible wear resistance.","Helix Direction":"RH","Radius Tolerance - Inch":"+/- 0.0002","Benefit 3":"Tools utilize thicker core diameters for the ultimate in strength and rigidity.","Feature 1":"Ultra-fine micrograin carbide","Nickel Alloy : Inconel":"S; Good","Surface Treatment":"WXL","Feature 4":"WXL coating - +1100 Celsius Oxidation Temp. & +3100Hv in hardness","List Name":"WXL-LN-EBD","Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"1/64\" - 0.25\"","Flute-Sizes":"-","Neck-Sizes":"0.046875\" - 2\"","Taper-Sizes":"-","Overall-Sizes":"2.5\" - 4.5\"","Shank-Sizes":"0.125\" - 0.25\"","Friendly Name":"3690","CategoryBrand":"EXOCARB"}
3710

3710

{"Number of Flutes":"2","Corner Radius - Metric (R)":["0.05","0.1","0.15","0.2","0.25","0.3","0.4","0.5","0.6","0.7","0.75","0.8","1","1.25","1.5","2","1.75","2.5","3","3.5","4","4.5","5","5.5","6","7","8","9","10"],"Overall Length - Metric (L)":["40","50","60","70","80","90","100","110","140","160"],"Shank Diameter - Metric (d)":["4","6","8","10","12","16","20"],"Product Overview":"2 Flute, Regular Length, Ball End, WXL","Diameter - Metric (D)":["0.1","0.2","0.3","0.4","0.5","0.6","0.8","1","1.2","1.4","1.5","1.6","2","2.5","3","4","3.5","5","6","7","8","9","10","11","12","14","16","18","20"],"Helix Angle - Degree":"30","Web Literature 4":"800388CA","Length of Cut - Metric (Lc)":["0.2","0.4","0.6","0.8","1.1","2","1.5","3","3.5","4","4.5","8","2.5","5","6","12","10","14","18","15","22","26","30","34","38"],"Feature 2":"High Precision geometry - Ball End Mills have +/-5um radius tolerance","Feature 3":"High strength core diameter","Benefit 4":"Higher coating oxidation temp & hardness dramatically improve wear resistance.","Web Video 1":["https://youtu.be/dNdGq78-DvA"],"Web Literature 1":"8002024CA-EM,273|8002024CA-EMT,142","Hardened Steels : 35 HRC":"H; Best","End Cut Type":"Ball Nose","Web Literature 2":"800304CA","Hardened Steels : 35-45 HRC":"H; Best","Alloy Steels : 4140; 4340":"P; Best","Substrate":"Carbide","Web Literature 3":"800366CA|800365CA","Hardened Steels : 45-50 HRC":"H; Best","Die Steels":"P; Best","Cast Iron":"K; Best","High Carbon Steel : 1065":"P; Best","Cutting Type":"Center Cutting","Low Carbon Steel : 1010; 1018":"P; Best","Hardened Steels : 50-70 HRC":"H; Good","Medium Carbon Steel : 1035; 1045":"P; Best","Stainless Steels : 17-4PH":"M; Best","Shank Tolerance":"h6","Stainless Steels : 300":"M; Best","Benefit 2":"High accuracy all but eliminates need for benching and rework for mold makers.","Stainless Steels : 400":"M; Best","View Catalog Page":"Here","View Speed and Feed Page":"Here","Aluminum : Casting":"N; Good","Units":"Metric","Weldon Flat":"No","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Good","Mill Type":"Single End","Full Description":"Premium High Performance Carbide Ball Mills for Pre-hardened & Hardened Steels","Short Description":"Premium High Performance Carbide Ball Mills for Pre-hardened & Hardened Steels","Length of Cut - Specification":["REGULAR","STUB"],"Cutting Direction":"RH","Benefit 1":"The hardest ost wear resistant carbide possible for incredible wear resistance.","Helix Direction":"RH","Benefit 3":"Tools utilize thicker core diameters for the ultimate in strength and rigidity.","Radius Tolerance - Metric":["+/- 0.005","+0.003 / -0.007","+/- 0.010"],"Feature 1":"Ultra-fine micrograin carbide","Nickel Alloy : Inconel":"S; Good","Surface Treatment":"WXL","Feature 4":"WXL coating - +1100 Celsius Oxidation Temp. & +3100Hv in hardness","Titanium : 6AL4V (30HRC)":"S; Good","List Name":"WXL-EBD","DXF Drawing":["Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download"],"STP Drawing":["Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download"],"Catalog Page Number(s)":"1068","CategoryBrand":"EXOCARB","Diameter-Sizes":"0.1mm - 20mm","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"40mm - 160mm","Shank-Sizes":"4mm - 20mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%203710/End_Mills_-_End_Mill_-_EXOCARB_WXL_-_List_3710_-_Catalog"],"Friendly Name":"3710"}
3711

3711

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%203711/End_Mills_-_End_Mill_-_EXOCARB_WXL_-_List_3711_-_Catalog"],"Length of Cut - Metric (Lc)":["2.5","5","8","10","12","14","18","22","26","30","34"],"Number of Flutes":"2","Corner Radius - Metric (R)":["0.5","1","1.5","2","2.5","3","3.5","4","5","6","7","8","9"],"Shank Diameter - Metric (d)":["3","4","6","8","10","12","16"],"Overall Length - Metric (L)":["70","80","100","140","160","180","200","220"],"Product Overview":"2 Flute, Regular Length, Long Shank, WXL","Diameter - Metric (D)":["1","2","3","4","5","6","7","8","10","12","14","16","18"],"Helix Angle - Degree":"30","Web Literature 4":"800388CA","Feature 2":"High Precision geometry - Ball End Mills have +/-5um radius tolerance","Feature 3":"High strength core diameter","Benefit 4":"Higher coating oxidation temp & hardness dramatically improve wear resistance.","Web Video 1":"https://youtu.be/dNdGq78-DvA","Web Literature 1":"8002024CA-EM,277|8002024CA-EMT,147","End Cut Type":"Ball Nose","Hardened Steels : 35 HRC":"H; Best","Web Literature 2":"800304CA","Hardened Steels : 35-45 HRC":"H; Best","Alloy Steels : 4140; 4340":"P; Best","Substrate":"Carbide","Web Literature 3":"800366CA|800365CA","Hardened Steels : 45-50 HRC":"H; Best","Die Steels":"P; Best","Cast Iron":"K; Best","High Carbon Steel : 1065":"P; Best","Cutting Type":"Center Cutting","Low Carbon Steel : 1010; 1018":"P; Best","Hardened Steels : 50-70 HRC":"H; Good","Medium Carbon Steel : 1035; 1045":"P; Best","Type (feature)":"Long Shank","Stainless Steels : 17-4PH":"M; Best","Shank Tolerance":"h6","Stainless Steels : 300":"M; Best","Benefit 2":"High accuracy all but eliminates need for benching and rework for mold makers.","Stainless Steels : 400":"M; Best","View Catalog Page":"Here","View Speed and Feed Page":"Here","Aluminum : Casting":"N; Good","Units":"Metric","Weldon Flat":"No","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Good","List Name":"WXL-LS-EBD","Mill Type":"Single End","Full Description":"Premium High Performance Carbide End Mills for Pre-hardened & Hardened Steels","Short Description":"Premium High Performance Carbide End Mills for Pre-hardened & Hardened Steels","Length of Cut - Specification":["REGULAR","STUB"],"Cutting Direction":"RH","Benefit 1":"The hardest ost wear resistant carbide possible for incredible wear resistance.","Helix Direction":"RH","Radius Tolerance - Metric":["+/- 0.005","+/- 0.010"],"Benefit 3":"Tools utilize thicker core diameters for the ultimate in strength and rigidity.","Feature 1":"Ultra-fine micrograin carbide","Nickel Alloy : Inconel":"S; Good","Surface Treatment":"WXL","Feature 4":"WXL coating - +1100 Celsius Oxidation Temp. & +3100Hv in hardness","Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"1mm - 18mm","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"70mm - 220mm","Shank-Sizes":"3mm - 16mm","Friendly Name":"3711","CategoryBrand":"EXOCARB"}
3712

3712

{"Number of Flutes":"2","Corner Radius - Metric (R)":["0.1","0.15","0.2","0.25","0.3","0.4","0.5","0.6","0.75","1","1.5","2","2.5","3"],"Neck Diameter Min - Metric (d1 Min)":["0.19","0.29","0.38","0.48","0.58","0.78","0.95","1.15","1.42","1.93","2.95","3.93","4.95","5.95"],"Overall Length - Metric (L)":["45","50","55","65","70","80","90","100","60","75","85","110","130","120"],"Shank Diameter - Metric (d)":["4","6","8","10","12"],"Neck Taper Angle - Degree (α)":["0.5","1","1.5","2"],"Type":["1","3","4","2"],"Neck Length - Metric (L1)":["1.5","2.5","3","2","5","6","8","10","12","16","4","18","20","30","35","40","50","60","25","26","31.5","70","62.5","47.5","26.9","50.1","80","49","36"],"Product Overview":"2 Flute, Stub Length, Pencil Neck, WXL","Diameter - Metric (D)":["0.2","0.3","0.4","0.5","0.6","0.8","1","1.2","1.5","2","3","4","5","6"],"Helix Angle - Degree":"30","Length of Cut - Metric (Lc)":["0.16","0.24","0.3","0.4","0.5","0.6","0.63","0.76","0.95","1.26","2.4","3.2","5","6"],"Feature 2":"High Precision geometry - Ball End Mills have +/-5um radius tolerance","Feature 3":"High strength core diameter","Benefit 4":"Higher coating oxidation temp & hardness dramatically improve wear resistance.","Web Video 1":["https://youtu.be/dNdGq78-DvA"],"End Cut Type":"Ball Nose","Hardened Steels : 35 HRC":"H; Best","Hardened Steels : 35-45 HRC":"H; Best","Alloy Steels : 4140; 4340":"P; Best","Substrate":"Carbide","Hardened Steels : 45-50 HRC":"H; Best","Die Steels":"P; Best","Cast Iron":"K; Best","High Carbon Steel : 1065":"P; Best","Cutting Type":"Center Cutting","Low Carbon Steel : 1010; 1018":"P; Best","Hardened Steels : 50-70 HRC":"H; Good","Medium Carbon Steel : 1035; 1045":"P; Best","Stainless Steels : 17-4PH":"M; Best","Shank Tolerance":"h6","Stainless Steels : 300":"M; Best","Benefit 2":"High accuracy all but eliminates need for benching and rework for mold makers.","Stainless Steels : 400":"M; Best","Aluminum : Casting":"N; Good","Units":"Metric","Weldon Flat":"No","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Good","List Name":"WXL-PC-EBD","Type (feature)":"Pencil Neck","Mill Type":"Single End","Full Description":"Premium High Performance Carbide End Mills for Pre-hardened & Hardened Steels","Short Description":"Premium High Performance Carbide End Mills for Pre-hardened & Hardened Steels","Cutting Direction":"RH","Length of Cut - Specification":"STUB","Benefit 1":"The hardest most wear resistant carbide possible for incredible wear resistance.","Helix Direction":"RH","Benefit 3":"Tools utilize thicker core diameters for the ultimate in strength and rigidity.","Radius Tolerance - Metric":"+/- 0.005","Feature 1":"Ultra-fine micrograin carbide","Nickel Alloy : Inconel":"S; Good","Surface Treatment":"WXL","Feature 4":"WXL coating - +1100 Celsius Oxidation Temp. & +3100Hv in hardness","Titanium : 6AL4V (30HRC)":"S; Good","Bottom Edge Radius - Metric (R2)":"-","Coating Thickness (µm)":"-","Compatible Machine":"-","Compression Length - Inch (L2)":"-","Corner Chamfer - Inch (C)":"-","Corner Chamfer - Metric (C)":"-","Corner Radius - Inch (R)":"-","Cut Incline Angle - Degree (α)":"-","Cut Incline Angle Tolerance - Degree":"-","Cutting Diameter Tolerance - Inch":"-","Cutting Diameter Tolerance - Metric":"-","Diameter - Fractional Size (D)":"-","Diameter - Inch (D)":"-","Diameter at Center of Radius - Metric (dm)":"-","Edge Radius - Metric (R3)":"-","Effective Diameter - Inch (DCF)":"-","Effective Diameter - Metric (DCF)":"-","Effective Draft Angle - Degree (α)":"-","Effective Neck Length by Incline Angle 0.5° - Inch":"-","Effective Neck Length by Incline Angle 0.5° - Metric":"-","Effective Neck Length by Incline Angle 0° - Inch":"-","Effective Neck Length by Incline Angle 0° - Metric":"-","Effective Neck Length by Incline Angle 1.5° - Inch":"-","Effective Neck Length by Incline Angle 1.5° - Metric":"-","Effective Neck Length by Incline Angle 1° - Inch":"-","Effective Neck Length by Incline Angle 1° - Metric":"-","Effective Neck Length by Incline Angle 2.5° - Metric":"-","Effective Neck Length by Incline Angle 2° - Inch":"-","Effective Neck Length by Incline Angle 2° - Metric":"-","Effective Neck Length by Incline Angle 3° - Inch":"-","Effective Neck Length by Incline Angle 3° - Metric":"-","Effective Radius - Metric (rt)":"-","Form Tolerance - Metric":"-","Included Angle - Degree (α)":"-","Interference Angle - Degree (α)":"-","L/D Ratio":"-","Length of Cut - Inch (Lc)":"-","Length to Center of Radius - Metric (Lm)":"-","Neck Diameter - Inch (d1)":"-","Neck Diameter - Metric (d1)":"-","Neck Diameter Max - Inch (d1 Max)":"-","Neck Diameter Max - Metric (d1 Max)":"-","Neck Diameter Min - Inch (d1 Min)":"-","Neck Draft Angle - Degree (ß)":"-","Neck Length - Inch (L1)":"-","Non-Taper Neck Length - Inch (L2)":"-","Non-Taper Neck Length - Metric (L2)":"-","Overall Length - Inch (L)":"-","Peripheral Edge Radius - Metric (R2)":"-","Radius Tolerance - Inch":"-","Shank Diameter - Inch (d)":"-","Taper Angle Tolerance - Degree":"-","Taper Diameter - Metric (Ds)":"-","Taper per Side - Degree (α)":"-","Tilt Angle - Degree (α/2)":"-","Tip Radius - Metric (R1)":"-","Aramid Fiber (AFRP)":"-","Brass, Bronze":"-","Carbon Fiber (CFRP)":"-","Carbon Fiber / Al / Ti / CRES Stack":"-","Carbon Fiber / Aluminum Stack":"-","Carbon Fiber / Titanium Stack":"-","Carbon/Carbon":"-","Cobalt-Chrome":"-","Contour Milling":"-","Deep Side Milling":"-","Glass Ceramics":"-","Glass Fiber (GFRP)":"-","Graphite":"-","Helical Milling":"-","Honeycomb: AFRP":"-","Honeycomb: AI/AI":"-","Honeycomb: CFRP/AI":"-","Honeycomb: CFRP/Nomex":"-","Honeycomb: GFRP/Nomex":"-","Hybrid Ceramic / Composite":"-","Magnesium":"-","Notes":"-","PEEK":"-","Plunging":"-","Ramping":"-","Side Milling":"-","Slotting":"-","Titanium":"-","Trochoidal Milling":"-","Wax/PMMA":"-","Web Literature 1":"-","Web Literature 2":"-","Web Literature 3":"-","Web Literature 4":"-","Web Video 2":"-","Web Video 3":"-","Zirconia":"-","View Speed and Feed Page":"-","View Catalog Page":"-","CategoryBrand":"EXOCARB","Diameter-Sizes":"0.2mm - 6mm","Flute-Sizes":"-","Neck-Sizes":"1.5mm - 80mm","Taper-Sizes":"-","Overall-Sizes":"45mm - 130mm","Shank-Sizes":"4mm - 12mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%203712/End_Mills_-_End_Mill_-_EXOCARB_WXL_-_List_3712_-_Catalog","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%203712/End_Mills_-_End_Mill_-_EXOCARB_WXL-PC-EBD_-_List_3712_-_ZI"],"Friendly Name":"3712"}
3785 - BALL NOSE

3785 - BALL NOSE

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%203785/End_Mills_-_End_Mill_-_EXOCARB_VU-TBR_-_List_3785_-_Catalog"],"Length of Cut - Metric (Lc)":["8.2","9.9","11.7","13.5","18","17.1"],"Length to Center of Radius - Metric (Lm)":["3.43","4.48","5.52","6.57","8.99","8.67"],"Diameter - Metric (D)":["6","8","10","12","16"],"Number of Flutes":["4","6"],"Diameter at Center of Radius - Metric (dm)":["3.27","4.78","6.2","7.7","10.18","10.62"],"Edge Radius - Metric (R3)":"5","Tip Radius - Metric (R1)":["0.5","1","1.5","2","2.5","3"],"Overall Length - Metric (L)":["50","60","70","80","100"],"Shank Diameter - Metric (d)":["6","8","10","12","16"],"Peripheral Edge Radius - Metric (R2)":["150","300","500"],"Helix Angle - Degree":"15","Tilt Angle - Degree (α/2)":"20","Web Literature 4":"800388CA","Web Video 1":"https://youtu.be/1peM44Agm5w","Web Literature 1":"8002024CA-EM,283|8002024CA-EMT,152","Web Video 2":"https://youtu.be/NFy6vtsD1Mk","Hardened Steels : 35-45 HRC":"H; Best","Benefit 3":"Improves surface finish","Web Literature 2":"800320CA","Alloy Steels : 4140; 4340":"P; Best","Hardened Steels : 45-50 HRC":"H; Best","Substrate":"Carbide","Benefit 1":"Increase milling efficiency","Feature 2":"Increased step over","Die Steels":"P; Best","Product Overview":"Carbide, WXL Coating, Taper Barrel Type, Metric Sizes","High Carbon Steel : 1065":"P; Best","Cutting Type":"Center Cutting","Feature 1":"Large peripheral edge radius and multi-flute configuration","Low Carbon Steel : 1010; 1018":"P; Best","Shank Tolerance":"H5","Medium Carbon Steel : 1035; 1045":"P; Best","Full Description":"High Performance Taper Barrel Type End Mills for Finishing","Short Description":"High Performance Taper Barrel Type End Mills for Finishing","View Catalog Page":"Here","View Speed and Feed Page":"Here","Units":"Metric","Weldon Flat":"No","Coolant Thru":"No","Mill Type":"Single End","Feature 3":"Reduced cusp height","Benefit 2":"Reduced machining time compared to ball nose end mills","Cutting Direction":"RH","Length of Cut - Specification":"STUB","End Cut Type":"Taper Barrel","Type (feature)":"Tapered","Form Tolerance - Metric":"+/- 0.010","Helix Direction":"RH","List Name":"VU-TBR","Surface Treatment":"WXL","Diameter-Sizes":"6mm - 16mm","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"50mm - 100mm","Shank-Sizes":"6mm - 16mm","Friendly Name":"3785","CategoryBrand":"EXOCARB"}
3790

3790

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%203790/End_Mills_-_End_Mill_-_EXOCARB_WXL_-_List_3790_-_Catalog","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%203790/End_Mills_-_End_Mill_-_EXOCARB_WXL_-_List_3790_-_Extra_1","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%203790/OSG_-_Website_-_Product_Overview_-_WXL-LN-EBD_-_Type_2","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%203790/OSG_-_Website_-_Product_Overview_-_WXL-LN-EBD_-_Type_1"],"Number of Flutes":"2","Corner Radius - Metric (R)":["0.05","0.1","0.15","0.2","0.25","0.3","0.4","0.5","0.6","0.7","0.75","0.8","0.9","1","1.25","1.5","1.75","2","2.5","3"],"Neck Diameter - Metric (d1)":["0.085","0.18","0.28","0.37","0.45","0.55","0.75","0.95","1.15","1.35","1.45","1.55","1.75","1.95","2.45","2.85","3.35","3.85","4.85","5.85"],"Overall Length - Metric (L)":["45","50","55","60","65","70","75","80","85","90","100","120"],"Shank Diameter - Metric (d)":["4","6","3"],"Neck Length - Metric (L1)":["0.3","0.5","0.75","1","1.25","1.5","1.75","2","2.5","3","0.6","2.25","2.75","3.5","4","4.5","5","5.5","6","7","8","9","10","6.5","7.5","8.5","9.5","11","12","14","16","18","20","24","22","30","25","35","40","15","45","50"],"Product Overview":"2 FLute, Regular Length, Long Neck, Ball End, Rib Processing, WXL","Diameter - Metric (D)":["0.1","0.2","0.3","0.4","0.5","0.6","0.8","1","1.2","1.4","1.5","1.6","1.8","2","2.5","3","3.5","4","5","6"],"Helix Angle - Degree":"30","Length of Cut - Metric (Lc)":["0.1","0.2","0.16","0.24","0.3","0.4","0.5","0.6","0.8","1","1.1","1.2","1.3","1.4","1.6","2","2.4","2.8","3.2","5","4","6","4.8"],"Web Literature 4":"800388CA","Web Video 1":["https://youtu.be/dNdGq78-DvA","https://www.youtube.com/watch?v=cDO3qqnS8L8"],"Web Literature 1":["8002024CA-EM,275|8002024CA-EMT,143","8002024CA-EM,276|8002024CA-EMT,143"],"Hardened Steels : 35 HRC":"H; Best","End Cut Type":"Ball Nose","Hardened Steels : 35-45 HRC":"H; Best","Web Literature 2":"800304CA|800291CA","Alloy Steels : 4140; 4340":"P; Best","Substrate":"Carbide","Web Literature 3":"800366CA|800365CA","Hardened Steels : 45-50 HRC":"H; Best","Die Steels":"P; Best","Cast Iron":"K; Best","High Carbon Steel : 1065":"P; Best","Cutting Type":"Center Cutting","Low Carbon Steel : 1010; 1018":"P; Best","Hardened Steels : 50-70 HRC":"H; Good","Medium Carbon Steel : 1035; 1045":"P; Best","Type (feature)":"Long Neck","Stainless Steels : 17-4PH":"M; Best","Shank Tolerance":"h6","Stainless Steels : 300":"M; Best","Stainless Steels : 400":"M; Best","View Catalog Page":"Here","View Speed and Feed Page":"Here","Aluminum : Casting":"N; Good","Units":"Metric","Weldon Flat":"No","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Good","Mill Type":"Single End","Full Description":["Premium High Performance Carbide Ball Mills for Pre-hardened & Hardened Steels","Premium High Performance Carbide End Mills for Dental Industry"],"Short Description":["Premium High Performance Carbide Ball Mills for Pre-hardened & Hardened Steels","Premium High Performance Carbide End Mills for Dental Industry"],"Cutting Direction":"RH","Length of Cut - Specification":"STUB","Helix Direction":"RH","Radius Tolerance - Metric":"+/- 0.005","Nickel Alloy : Inconel":"S; Good","Surface Treatment":"WXL","Titanium : 6AL4V (30HRC)":"S; Good","List Name":"WXL-LN-EBD","Included Angle - Degree (α)":"-","Web Video 2":"https://youtu.be/dNdGq78-DvA","Wax/PMMA":"Other; Best","Cobalt-Chrome":"Other; Good","PEEK":"Other; Good","Zirconia":"Other; Good","Titanium":"S; Best","Diameter-Sizes":"0.1mm - 6mm","Flute-Sizes":"-","Neck-Sizes":"0.3mm - 50mm","Taper-Sizes":"-","Overall-Sizes":"45mm - 120mm","Shank-Sizes":"3mm - 6mm","Friendly Name":"3790","CategoryBrand":"EXOCARB"}
3990

3990

{"Number of Flutes":"2","Neck Diameter - Metric (d1)":["1.95","0.55","0.93","0.95","2.32","2.3","1.45","2.85","0.28","0.45"],"Corner Radius - Metric (R)":["1","0.3","0.5","1.25","0.75","1.5","0.15","0.25"],"Overall Length - Metric (L)":["50","40","47","45"],"Shank Diameter - Metric (d)":["4","3","6"],"Neck Length - Metric (L1)":["20","6","12","16","17.5","19","17","2.5","8","10","2","7","14"],"Product Overview":"2 FLute, Regular Length, Long Neck, Ball End, Rib Processing, WXL","Helix Angle - Degree":"30","Diameter - Metric (D)":["2","0.6","1","2.5","1.5","3","0.3","0.5"],"Length of Cut - Metric (Lc)":["1.6","0.5","0.8","0.9","2","5","10","6","1.2","2.4","0.24","0.4"],"Web Video 1":"https://www.youtube.com/watch?v=cDO3qqnS8L8","Web Video 2":["https://youtu.be/dNdGq78-DvA"],"End Cut Type":"Ball Nose","Wax/PMMA":"Other; Best","Cobalt-Chrome":["Other; Good","Other; Best"],"PEEK":"Other; Good","Zirconia":"Other; Good","Substrate":"Carbide","Cutting Type":"Center Cutting","Type (feature)":"Long Neck","Shank Tolerance":"h6","Units":"Metric","Weldon Flat":"No","Coolant Thru":"No","Mill Type":"Single End","Full Description":"Premium High Performance Carbide End Mills for Dental Industry","Short Description":"Premium High Performance Carbide End Mills for Dental Industry","Cutting Direction":"RH","Length of Cut - Specification":["STUB","REGULAR","LONG"],"Included Angle - Degree (α)":"-","Helix Direction":"RH","Radius Tolerance - Metric":"+/- 0.005","Titanium":"S; Best","Surface Treatment":"WXL","List Name":["WXL-LN-EBD","WXL-LN-EBD AG","WXL-LN-EBD ZI","WXL-LN-EBD IM","WXL-LN-EBD RO"],"STP Drawing":["Download","Download","Download","Download","Download","Download","Download","Download"],"DXF Drawing":["Download","Download","Download","Download","Download","Download","Download","Download"],"Compatible Machine":["vhf","Amann Girrbach","Zirkonzahn","imes-icore","Roland"],"Notes":["Compatible with S1, S2, K5","Compatible with CORiTEC 350i, 650i"],"CategoryBrand":"EXOCARB","Diameter-Sizes":"0.3mm - 3mm","Flute-Sizes":"-","Neck-Sizes":"2mm - 20mm","Taper-Sizes":"-","Overall-Sizes":"40mm - 50mm","Shank-Sizes":"3mm - 6mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%203990/End_Mills_-_End_Mill_-_EXOCARB_WXL_-_List_3790_-_1000px","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%203990/OSG_-_Website_-_Product_Overview_-_WXL-LN-EBD_-_3","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%203990/OSG_-_Website_-_Product_Overview_-_WXL-LN-EBD_-_4","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%203990/WXL-LN-EBD_AG","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%203990/WXL-LN-EBD_IM","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%203990/WXL-LN-EBD_VH"],"Friendly Name":"3990"}
402BN

402BN

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%20402BN/End_Mills_-_End_Mill_-_Carbide_-_List_402BN_-_Standard_Ball_End_-_Catalog"],"Number of Flutes":"2","Corner Radius - Metric (R)":["0.25","0.5","0.75","1","1.25","1.5","1.75","2","2.25","2.5","3","3.5","4","4.5","5","5.5","6","7","8","9","10","11","12.5"],"Overall Length - Metric (L)":["39","51","64","70","76","89","102"],"Shank Diameter - Metric (d)":["3","4","5","6","8","10","11","12","14","16","18","20","22","25"],"Cutting Diameter Tolerance - Metric":"+0 / -0.050","Product Overview":"2 Flute, Ball End","Diameter - Metric (D)":["0.5","1","1.5","2","2.5","3","3.5","4","4.5","5","6","7","8","9","10","11","12","14","16","18","20","22","25"],"Helix Angle - Degree":"30","Length of Cut - Metric (Lc)":["1.5","3","5","7","8","10","12","14","16","19","21","22","25","30","32","35","38"],"Web Literature 4":"800388CA","Stainless Steels : 300":"M; Good","Stainless Steels : 400":"M; Good","End Cut Type":"Ball Nose","Web Literature 1":["8002024CA-EM,307|8002024CA-EMT,167","8002024CA-EM,309|8002024CA-EMT,167","8002024CA-EM,308|8002024CA-EMT,167"],"Notes":"Other coatings available upon request.","Surface Treatment":["BRIGHT","TiAlN"],"Substrate":"Carbide","Hardened Steels : 35 HRC":"H; Good","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":"Center Cutting","Cast Iron":"K; Good","Alloy Steels : 4140; 4340":"P; Good","Die Steels":"P; Good","High Carbon Steel : 1065":"P; Good","Low Carbon Steel : 1010; 1018":"P; Good","Medium Carbon Steel : 1035; 1045":"P; Good","View Catalog Page":"Here","View Speed and Feed Page":"Here","Aluminum : Casting":"N; Good","Units":["Metric","Inch"],"Weldon Flat":"No","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Good","Mill Type":"Single End","Length of Cut - Specification":["REGULAR","LONG","STUB"],"List Name":"STANDARD CARBIDE BN","Full Description":"Standard Carbide End Mills for General Milling Applications","Short Description":"Standard Carbide End Mills for General Milling Applications","Cutting Direction":"RH","Helix Direction":"RH","Corner Radius - Inch (R)":["0.015625","0.023437","0.03125","0.039062","0.046875","0.5","0.054687","0.0625","0.070312","0.078125","0.085937","0.09375","0.101562","0.109375","0.117187","0.125","0.132812","0.140625","0.148437","0.15625","0.164062","0.171875","0.179687","0.1875","0.195312","0.203125","0.210937","0.21875","0.226562","0.234375","0.242187","0.25","0.28125","0.3125","0.34375","0.375","0.4375"],"Diameter - Inch (D)":["0.03125","0.046875","0.0625","0.078125","0.09375","1","0.109375","0.125","0.140625","0.15625","0.171875","0.1875","0.203125","0.21875","0.234375","0.25","0.265625","0.28125","0.296875","0.3125","0.328125","0.34375","0.359375","0.375","0.390625","0.40625","0.421875","0.4375","0.453125","0.46875","0.484375","0.5","0.5625","0.625","0.6875","0.75","0.875"],"Cutting Diameter Tolerance - Inch":"+0 / -0.002","Diameter - Fractional Size (D)":["1/32","3/64","1/16","5/64","3/32","1","7/64","1/8","9/64","5/32","11/64","3/16","13/64","7/32","15/64","1/4","17/64","9/32","19/64","5/16","21/64","11/32","23/64","3/8","25/64","13/32","27/64","7/16","29/64","15/32","31/64","1/2","9/16","5/8","11/16","3/4","7/8"],"Shank Diameter - Inch (d)":["0.125","1","0.1875","0.25","0.3125","0.375","0.4375","0.5","0.5625","0.625","0.75","0.875"],"Length of Cut - Inch (Lc)":["0.125","0.140625","0.1875","0.25","0.3125","1.5","0.375","0.5","0.5625","0.625","0.75","0.8125","0.875","1","1.125","1.25","1.375"],"Overall Length - Inch (L)":["1.5","4","2","2.5","2.75","3","3.5"],"Diameter-Sizes":"0.5mm - 1\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"1.5\" - 102mm","Shank-Sizes":"3mm - 1\"","Friendly Name":"402BN","CategoryBrand":"OSG"}
403BN

403BN

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%20403BN/End_Mills_-_End_Mill_-_Carbide_-_List_403BN_-_Standard_Ball_End_-_Catalog"],"Number of Flutes":"3","Length of Cut - Metric (Lc)":["3","5","7","8","10","12","14","16","19","21","22","25","30","32","35","38"],"Corner Radius - Metric (R)":["0.5","0.75","1","1.25","1.5","1.75","2","2.25","2.5","3","3.5","4","4.5","5","5.5","6","7","8","9","10","11","12.5"],"Overall Length - Metric (L)":["39","51","64","70","76","89","102"],"Shank Diameter - Metric (d)":["3","4","5","6","8","10","11","12","14","16","18","20","22","25"],"Cutting Diameter Tolerance - Metric":"+0 / -0.050","Product Overview":"3 Flute, Ball End","Diameter - Metric (D)":["1","1.5","2","2.5","3","3.5","4","4.5","5","6","7","8","9","10","11","12","14","16","18","20","22","25"],"Helix Angle - Degree":"30","Web Literature 4":"800388CA","Stainless Steels : 300":"M; Good","Stainless Steels : 400":"M; Good","End Cut Type":"Ball Nose","Web Literature 1":["8002024CA-EM,310|8002024CA-EMT,167","8002024CA-EM,311|8002024CA-EMT,167"],"Notes":"Other coatings available upon request.","Surface Treatment":["BRIGHT","TiAlN"],"Substrate":"Carbide","Hardened Steels : 35 HRC":"H; Good","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":"Center Cutting","Cast Iron":"K; Good","Hardened Steels : 45-50 HRC":"H; Good","Alloy Steels : 4140; 4340":"P; Good","Die Steels":"P; Good","High Carbon Steel : 1065":"P; Good","Low Carbon Steel : 1010; 1018":"P; Good","Medium Carbon Steel : 1035; 1045":"P; Good","View Catalog Page":"Here","View Speed and Feed Page":"Here","Aluminum : Casting":"N; Good","Units":["Metric","Inch"],"Weldon Flat":"No","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Good","Mill Type":"Single End","Length of Cut - Specification":["REGULAR","LONG","STUB"],"List Name":"STANDARD CARBIDE BN","Full Description":"Standard Carbide End Mills for General Milling Applications","Short Description":"Standard Carbide End Mills for General Milling Applications","Cutting Direction":"RH","Helix Direction":"RH","Corner Radius - Inch (R)":["0.03125","0.039062","0.046875","0.5","0.054687","0.0625","0.070312","0.078125","0.085937","0.09375","0.101562","0.109375","0.117187","0.125","0.132812","0.140625","0.148437","0.15625","0.1875","0.21875","0.25","0.28125","0.3125","0.34375","0.375","0.4375"],"Diameter - Inch (D)":["0.0625","0.078125","0.09375","1","0.109375","0.125","0.140625","0.15625","0.171875","0.1875","0.203125","0.21875","0.234375","0.25","0.265625","0.28125","0.296875","0.3125","0.375","0.4375","0.5","0.5625","0.625","0.6875","0.75","0.875"],"Cutting Diameter Tolerance - Inch":"+0 / -0.002","Diameter - Fractional Size (D)":["1/16","5/64","3/32","1","7/64","1/8","9/64","5/32","11/64","3/16","13/64","7/32","15/64","1/4","17/64","9/32","19/64","5/16","3/8","7/16","1/2","9/16","5/8","11/16","3/4","7/8"],"Shank Diameter - Inch (d)":["0.125","1","0.1875","0.25","0.3125","0.375","0.4375","0.5","0.5625","0.625","0.75","0.875"],"Overall Length - Inch (L)":["1.5","4","2","2.5","2.75","3","3.5"],"Length of Cut - Inch (Lc)":["0.1875","0.25","0.3125","1.5","0.375","0.5","0.5625","0.625","0.75","0.8125","1","1.125","1.25","1.375"],"Diameter-Sizes":"1mm - 1\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"1.5\" - 102mm","Shank-Sizes":"3mm - 1\"","Friendly Name":"403BN","CategoryBrand":"OSG"}
404BN

404BN

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%20404BN/End_Mills_-_End_Mill_-_Carbide_-_List_404BN_-_Standard_Ball_End_-_Catalog","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%20404BN/End_Mills_-_End_Mill_-_Carbide_-_List_404BN_-_Standard_Ball_End_-_Angle_1"],"Number of Flutes":"4","Corner Radius - Inch (R)":["0.015625","0.023437","0.03125","0.039062","0.046875","0.5","0.054687","0.0625","0.070312","0.078125","0.085937","0.09375","0.101562","0.109375","0.117187","0.125","0.132812","0.140625","0.148437","0.15625","0.164062","0.171875","0.179687","0.1875","0.195312","0.203125","0.210937","0.21875","0.226562","0.234375","0.242187","0.25","0.28125","0.3125","0.34375","0.375","0.4375"],"Diameter - Inch (D)":["0.03125","0.046875","0.0625","0.078125","0.09375","1","0.109375","0.125","0.140625","0.15625","0.171875","0.1875","0.203125","0.21875","0.234375","0.25","0.265625","0.28125","0.296875","0.3125","0.328125","0.34375","0.359375","0.375","0.390625","0.40625","0.421875","0.4375","0.453125","0.46875","0.484375","0.5","0.5625","0.625","0.6875","0.75","0.875"],"Cutting Diameter Tolerance - Inch":"+0 / -0.002","Diameter - Fractional Size (D)":["1/32","3/64","1/16","5/64","3/32","1","7/64","1/8","9/64","5/32","11/64","3/16","13/64","7/32","15/64","1/4","17/64","9/32","19/64","5/16","21/64","11/32","23/64","3/8","25/64","13/32","27/64","7/16","29/64","15/32","31/64","1/2","9/16","5/8","11/16","3/4","7/8"],"Shank Diameter - Inch (d)":["0.125","1","0.1875","0.25","0.3125","0.375","0.4375","0.5","0.5625","0.625","0.75","0.875"],"Length of Cut - Inch (Lc)":["0.125","0.140625","0.1875","0.25","0.3125","1.5","0.375","0.5","0.5625","0.625","0.75","0.8125","0.875","1","1.125","1.25","1.375"],"Overall Length - Inch (L)":["1.5","4","2","2.5","2.75","3","3.5"],"Helix Angle - Degree":"30","Web Literature 4":"800388CA","Product Overview":"4 Flute, Ball End","Stainless Steels : 300":"M; Good","Stainless Steels : 400":"M; Good","End Cut Type":"Ball Nose","Web Literature 1":["8002024CA-EM,312|8002024CA-EMT,168","8002024CA-EM,314|8002024CA-EMT,168","8002024CA-EM,313|8002024CA-EMT,168"],"Notes":"Other coatings available upon request.","Surface Treatment":["BRIGHT","TiAlN"],"Units":["Inch","Metric"],"Substrate":"Carbide","Hardened Steels : 35 HRC":"H; Good","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":"Center Cutting","Cast Iron":"K; Good","Hardened Steels : 45-50 HRC":"H; Good","Length of Cut - Specification":["LONG","REGULAR","STUB"],"Alloy Steels : 4140; 4340":"P; Good","Die Steels":"P; Good","High Carbon Steel : 1065":"P; Good","Low Carbon Steel : 1010; 1018":"P; Good","Medium Carbon Steel : 1035; 1045":"P; Good","View Catalog Page":"Here","View Speed and Feed Page":"Here","Aluminum : Casting":"N; Good","Weldon Flat":"No","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Good","Mill Type":"Single End","List Name":"STANDARD CARBIDE BN","Full Description":"Standard Carbide End Mills for General Milling Applications","Short Description":"Standard Carbide End Mills for General Milling Applications","Cutting Direction":"RH","Helix Direction":"RH","Length of Cut - Metric (Lc)":["3","5","7","8","10","12","14","16","19","21","22","25","30","32","35","38"],"Corner Radius - Metric (R)":["0.5","0.75","1","1.25","1.5","1.75","2","2.25","2.5","3","3.5","4","4.5","5","5.5","6","7","8","9","10","11","12.5"],"Overall Length - Metric (L)":["39","51","64","70","76","89","102"],"Shank Diameter - Metric (d)":["3","4","5","6","8","10","11","12","14","16","18","20","22","25"],"Cutting Diameter Tolerance - Metric":"+0 / -0.050","Diameter - Metric (D)":["1","1.5","2","2.5","3","3.5","4","4.5","5","6","7","8","9","10","11","12","14","16","18","20","22","25"],"Diameter-Sizes":"1/32\" - 1\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"1.5\" - 102mm","Shank-Sizes":"3mm - 1\"","Friendly Name":"404BN","CategoryBrand":"OSG"}
412BN

412BN

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%20412BN/End_Mills_-_End_Mill_-_Carbide_-_List_412BN_-_Standard_Ball_End_-_Catalog"],"Number of Flutes":"2","Corner Radius - Inch (R)":["0.015625","0.023437","0.03125","0.039062","0.046875","0.054687","0.0625","0.070312","0.078125","0.09375","0.109375","0.125","0.15625","0.1875","0.21875","0.25","0.3125","0.375"],"Diameter - Inch (D)":["0.03125","0.046875","0.0625","0.078125","0.09375","0.109375","0.125","0.140625","0.15625","0.1875","0.21875","0.25","0.3125","0.375","0.4375","0.5","0.625","0.75"],"Cutting Diameter Tolerance - Inch":"+0 / -0.002","Diameter - Fractional Size (D)":["1/32","3/64","1/16","5/64","3/32","7/64","1/8","9/64","5/32","3/16","7/32","1/4","5/16","3/8","7/16","1/2","5/8","3/4"],"Product Overview":"2 Flute, Ball End","Shank Diameter - Inch (d)":["0.125","0.1875","0.25","0.3125","0.375","0.4375","0.5","0.625","0.75"],"Length of Cut - Inch (Lc)":["0.078125","0.09375","0.125","0.15625","0.1875","0.21875","0.25","0.28125","0.3125","0.375","0.4375","0.5","0.625","0.75","1"],"Overall Length - Inch (L)":["1.5","2","2.5","3"],"Helix Angle - Degree":"30","Web Literature 4":"800388CA","Stainless Steels : 300":"M; Good","Stainless Steels : 400":"M; Good","Web Literature 1":"8002024CA-EM,306|8002024CA-EMT,167","End Cut Type":"Ball Nose","Notes":"Other coatings available upon request.","Surface Treatment":["BRIGHT","TiAlN"],"Units":["Inch","Metric"],"Substrate":"Carbide","Hardened Steels : 35 HRC":"H; Good","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":"Center Cutting","Cast Iron":"K; Good","Hardened Steels : 45-50 HRC":"H; Good","Alloy Steels : 4140; 4340":"P; Good","Die Steels":"P; Good","High Carbon Steel : 1065":"P; Good","Low Carbon Steel : 1010; 1018":"P; Good","Medium Carbon Steel : 1035; 1045":"P; Good","View Catalog Page":"Here","View Speed and Feed Page":"Here","Aluminum : Casting":"N; Good","Weldon Flat":"No","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Good","Mill Type":"Single End","Length of Cut - Specification":["REGULAR","STUB"],"List Name":"STANDARD CARBIDE BN","Full Description":"Standard Carbide End Mills for General Milling Applications","Short Description":"Standard Carbide End Mills for General Milling Applications","Cutting Direction":"RH","Helix Direction":"RH","Length of Cut - Metric (Lc)":["2","3","4","5","6","7","8","9","10","12","14","16"],"Corner Radius - Metric (R)":["0.5","0.75","1","1.25","1.5","1.75","2","2.25","2.5","3","3.5","4","4.5","5","5.5","6"],"Overall Length - Metric (L)":["39","51","64"],"Shank Diameter - Metric (d)":["3","4","5","6","8","10","11","12"],"Cutting Diameter Tolerance - Metric":"+0 / -0.050","Diameter - Metric (D)":["1","1.5","2","2.5","3","3.5","4","4.5","5","6","7","8","9","10","11","12"],"Diameter-Sizes":"1/32\" - 0.75\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"1.5\" - 3\"","Shank-Sizes":"3mm - 0.75\"","Friendly Name":"412BN","CategoryBrand":"OSG"}
414BN

414BN

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%20414BN/End_Mills_-_End_Mill_-_Carbide_-_List_414BN_-_Standard_Ball_End_-_Catalog"],"Number of Flutes":"4","Corner Radius - Inch (R)":["0.015625","0.023437","0.03125","0.039062","0.046875","0.054687","0.0625","0.070312","0.078125","0.09375","0.109375","0.125","0.15625","0.1875","0.21875","0.25","0.3125","0.375"],"Diameter - Inch (D)":["0.03125","0.046875","0.0625","0.078125","0.09375","0.109375","0.125","0.140625","0.15625","0.1875","0.21875","0.25","0.3125","0.375","0.4375","0.5","0.625","0.75"],"Cutting Diameter Tolerance - Inch":"+0 / -0.002","Diameter - Fractional Size (D)":["1/32","3/64","1/16","5/64","3/32","7/64","1/8","9/64","5/32","3/16","7/32","1/4","5/16","3/8","7/16","1/2","5/8","3/4"],"Shank Diameter - Inch (d)":["0.125","0.1875","0.25","0.3125","0.375","0.4375","0.5","0.625","0.75"],"Length of Cut - Inch (Lc)":["0.078125","0.09375","0.125","0.15625","0.1875","0.21875","0.25","0.28125","0.3125","0.375","0.4375","0.5","0.625","0.75","1"],"Overall Length - Inch (L)":["1.5","2","2.5","3"],"Helix Angle - Degree":"30","Web Literature 4":"800388CA","Product Overview":"4 Flute, Stub Length, Ball End","Stainless Steels : 300":"M; Good","Stainless Steels : 400":"M; Good","End Cut Type":"Ball Nose","Web Literature 1":"8002024CA-EM,315|8002024CA-EMT,168","Notes":"Other coatings available upon request.","Surface Treatment":["BRIGHT","TiAlN","TiCN"],"Units":["Inch","Metric"],"Substrate":"Carbide","Hardened Steels : 35 HRC":"H; Good","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":"Center Cutting","Cast Iron":"K; Good","Hardened Steels : 45-50 HRC":"H; Good","Alloy Steels : 4140; 4340":"P; Good","Die Steels":"P; Good","High Carbon Steel : 1065":"P; Good","Low Carbon Steel : 1010; 1018":"P; Good","Medium Carbon Steel : 1035; 1045":"P; Good","View Catalog Page":"Here","View Speed and Feed Page":"Here","Aluminum : Casting":"N; Good","Weldon Flat":"No","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Good","Mill Type":"Single End","Length of Cut - Specification":["REGULAR","STUB"],"List Name":"STANDARD CARBIDE BN","Full Description":"Standard Carbide End Mills for General Milling Applications","Short Description":"Standard Carbide End Mills for General Milling Applications","Cutting Direction":"RH","Helix Direction":"RH","Length of Cut - Metric (Lc)":["2","3","4","5","6","7","8","9","10","12","14","16"],"Corner Radius - Metric (R)":["0.5","0.75","1","1.25","1.5","1.75","2","2.25","2.5","3","3.5","4","4.5","5","5.5","6"],"Overall Length - Metric (L)":["39","51","64"],"Shank Diameter - Metric (d)":["3","4","5","6","8","10","11","12"],"Cutting Diameter Tolerance - Metric":"+0 / -0.050","Diameter - Metric (D)":["1","1.5","2","2.5","3","3.5","4","4.5","5","6","7","8","9","10","11","12"],"Diameter-Sizes":"1/32\" - 0.75\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"1.5\" - 3\"","Shank-Sizes":"3mm - 0.75\"","Friendly Name":"414BN","CategoryBrand":"OSG"}
424BN

424BN

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%20424BN/End_Mills_-_End_Mill_-_Carbide_-_List_424BN_-_Standard_Double_End_-_Catalog"],"Number of Flutes":"4","Corner Radius - Inch (R)":["0.015625","0.023437","0.03125","0.039062","0.046875","0.054687","0.0625","0.070312","0.078125","0.09375","0.109375","0.125","0.15625","0.1875","0.21875","0.25"],"Diameter - Inch (D)":["0.03125","0.046875","0.0625","0.078125","0.09375","0.109375","0.125","0.140625","0.15625","0.1875","0.21875","0.25","0.3125","0.375","0.4375","0.5"],"Cutting Diameter Tolerance - Inch":"+0 / -0.002","Diameter - Fractional Size (D)":["1/32","3/64","1/16","5/64","3/32","7/64","1/8","9/64","5/32","3/16","7/32","1/4","5/16","3/8","7/16","1/2"],"Shank Diameter - Inch (d)":["0.125","0.1875","0.25","0.3125","0.375","0.4375","0.5"],"Length of Cut - Inch (Lc)":["0.078125","0.09375","0.125","0.15625","0.1875","0.21875","0.25","0.28125","0.3125","0.375","0.5","0.5625","0.625"],"Overall Length - Inch (L)":["1.5","2","2.5","2.75","3"],"Helix Angle - Degree":"30","Web Literature 4":"800388CA","Product Overview":"4 Flute, Stub Length, Double End, Ball End","Stainless Steels : 300":"M; Good","Stainless Steels : 400":"M; Good","End Cut Type":"Ball Nose","Web Literature 1":"8002024CA-EM,318|8002024CA-EMT,168","Surface Treatment":["BRIGHT","TiAlN"],"Units":"Inch","Substrate":"Carbide","Hardened Steels : 35 HRC":"H; Good","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":"Center Cutting","Cast Iron":"K; Good","Hardened Steels : 45-50 HRC":"H; Good","Alloy Steels : 4140; 4340":"P; Good","Mill Type":"Double End","Die Steels":"P; Good","High Carbon Steel : 1065":"P; Good","Low Carbon Steel : 1010; 1018":"P; Good","View Catalog Page":"Here","View Speed and Feed Page":"Here","Aluminum : Casting":"N; Good","Weldon Flat":"No","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Good","Medium Carbon Steel : 1035; 1045":"P; Good","Length of Cut - Specification":["REGULAR","STUB"],"List Name":"STANDARD CARBIDE DOUBLE END BN","Full Description":"Standard Carbide End Mills for General Milling Applications","Short Description":"Standard Carbide End Mills for General Milling Applications","Cutting Direction":"RH","Helix Direction":"RH","Diameter-Sizes":"1/32\" - 0.5\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"1.5\" - 3\"","Shank-Sizes":"0.125\" - 0.5\"","Friendly Name":"424BN","CategoryBrand":"OSG"}
440

440

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%20440/End_Mills_-_End_Mill_-_Roughing_Cut_-_List_440_-_Roughing_End_Mills_-_Catalog"],"Overall Length - Inch (L)":["3.25","4","3.75","4.625","3.875","5.25","4.5","6.5","7.75","9.75"],"Number of Flutes":["4","6","8"],"Corner Radius - Inch (R)":["0.25","0.3125","0.375","0.5","0.625","0.75","1"],"Diameter - Fractional Size (D)":["1/2","5/8","3/4","1","1-1/4","1-1/2","2"],"Diameter - Inch (D)":["0.5","0.625","0.75","1","1.25","1.5","2"],"Helix Angle - Degree":"30","Length of Cut - Inch (Lc)":["1.25","2","1.625","2.5","3","4","6"],"Web Literature 4":"800388CA","Shank Diameter - Inch (d)":["0.5","0.625","0.75","1","1.25","2"],"Stainless Steels : 300":"M; Good","Substrate":"HSS-CO","Stainless Steels : 400":"M; Good","End Cut Type":"Ball Nose","Web Literature 1":"8002024CA-EM,324|8002024CA-EMT,171","Surface Treatment":"BRIGHT","Notes":"Other coatings available upon request. 2\" diameter shanks have combination drive.","Units":"Inch","Hardened Steels : 35 HRC":"H; Good","Cutting Type":"Center Cutting","Cast Iron":"K; Good","List Name":"COBALT HSS EX-REB","Full Description":"Cobalt-HSS Roughing Cut End Mills for Ferrous and Non-Ferrous Materials","Short Description":"Cobalt-HSS Roughing Cut End Mills for Ferrous and Non-Ferrous Materials","Alloy Steels : 4140; 4340":"P; Good","Die Steels":"P; Good","High Carbon Steel : 1065":"P; Good","Stainless Steels : 17-4PH":"M; Good","Low Carbon Steel : 1010; 1018":"P; Good","View Catalog Page":"Here","View Speed and Feed Page":"Here","Aluminum : Casting":"N; Good","Product Overview":"Multiple Flute, HSS-Co, Regular Pitch, Ball End, Roughing Cut","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Good","Medium Carbon Steel : 1035; 1045":"P; Good","Weldon Flat":"Yes","Mill Type":"Single End","Length of Cut - Specification":["REGULAR","LONG","STUB"],"Cutting Direction":"RH","Helix Direction":"RH","Type (feature)":"Roughing","Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"1/2\" - 2\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"3.25\" - 9.75\"","Shank-Sizes":"0.5\" - 2\"","Friendly Name":"440","CategoryBrand":"OSG"}
4413

4413

{"Number of Flutes":"2","Corner Radius - Inch (R)":["0.03125","0.046875","0.0625","0.09375","0.125","0.15625","0.1875","0.25"],"Neck Diameter Max - Inch (d1 Max)":["0.0555","0.0833","0.111","0.1856","0.2475","0.3094","0.3712","0.495"],"Neck Diameter Min - Inch (d1 Min)":["0.0555","0.0833","0.111","0.1434","0.1912","0.2391","0.2868","0.3825"],"Neck Length - Inch (L1)":["0.3125","0.4688","0.625","0.9375","1.25","1.5625","1.875","2.5"],"Diameter - Inch (D)":["0.0625","0.09375","0.125","0.1875","0.25","0.3125","0.375","0.5"],"Type":["1","2"],"Diameter - Fractional Size (D)":["1/16","3/32","1/8","3/16","1/4","5/16","3/8","1/2"],"Product Overview":"2 Flute, Ball End, Stub Length, Sphere Type, WXS","Length of Cut - Inch (Lc)":["0.0442","0.0663","0.0884","0.1326","0.1768","0.221","0.2652","0.3536"],"Shank Diameter - Inch (d)":["0.25","0.3125","0.375","0.5"],"Helix Angle - Degree":"30","Overall Length - Inch (L)":["2.5","2.75","3.25","3.5","4","4.25","4.5"],"Web Literature 4":"800388CA","Feature 2":"High Precision geometry - All corner radius & ball mills have +/-5um radius tolerance","Stainless Steels : 300":"M; Good","Feature 3":"High strength core diameter","Benefit 4":"Higher coating oxidation temp & hardness dramatically improve wear resistance.","Stainless Steels : 400":["M; Good"],"Web Literature 1":"8002024CA-EM,278|8002024CA-EMT,148","End Cut Type":"Ball Nose","Hardened Steels : 35 HRC":"H; Best","Hardened Steels : 35-45 HRC":"H; Best","Alloy Steels : 4140; 4340":"P; Best","Hardened Steels : 45-50 HRC":"H; Best","Units":"Inch","Substrate":"Carbide","Hardened Steels : 50-70 HRC":"H; Best","Die Steels":"P; Best","Cast Iron":"K; Best","High Carbon Steel : 1065":"P; Best","Cutting Type":"Center Cutting","Low Carbon Steel : 1010; 1018":"P; Best","Medium Carbon Steel : 1035; 1045":"P; Best","Shank Tolerance":"h6","Benefit 2":"High accuracy all but eliminates need for benching and rework for mold makers.","Stainless Steels : 17-4PH":"M; Good","View Catalog Page":"Here","View Speed and Feed Page":"Here","Weldon Flat":"No","Coolant Thru":"No","Surface Treatment":"WXS","Feature 4":"WXS coating has a +1300 Celsius Oxidation Temp. & +3500Hv in hardness","List Name":"WXS-EQD","Mill Type":"Single End","Full Description":"Premium High Performance Carbide End Mills for Hardened Steels","Short Description":"Premium High Performance Carbide End Mills for Hardened Steels","Type (feature)":"Sphere","Cutting Direction":"RH","Length of Cut - Specification":"STUB","Benefit 1":"The hardest most wear resistant carbide possible for incredible wear resistance.","Helix Direction":"RH","Radius Tolerance - Inch":["+/- 0.0004","+/- 0.0006"],"Benefit 3":"Tools utilize thicker core diameters for the ultimate in strength and rigidity.","Feature 1":"Ultra-fine micrograin carbide","STP Drawing":["Download","Download","Download","Download","Download","Download","Download","Download"],"DXF Drawing":["Download","Download","Download","Download","Download","Download","Download","Download"],"Neck Taper Angle - Degree (α)":"1.5","CategoryBrand":"EXOCARB","Diameter-Sizes":"1/16\" - 0.5\"","Flute-Sizes":"-","Neck-Sizes":"0.3125\" - 2.5\"","Taper-Sizes":"-","Overall-Sizes":"2.5\" - 4.5\"","Shank-Sizes":"0.25\" - 0.5\"","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%204413/End_Mills_-_End_Mill_-_EXOCARB_WXS_-_List_4413_-_Catalog"],"Friendly Name":"4413"}
4513

4513

{"Number of Flutes":"2","Corner Radius - Metric (R)":["0.5","1","1.5","2","3","4","5","6","2.5"],"Neck Diameter Max - Metric (d1 Max)":["0.85","1.7","2.7","3.7","5.9","7.9","9.9","11.9","4.4"],"Neck Diameter Min - Metric (d1 Min)":["0.85","1.7","2.7","3.7","4.6","6.2","7.7","9.2","4.4"],"Overall Length - Metric (L)":["60","70","90","100","110","80"],"Shank Diameter - Metric (d)":["6","8","10","12"],"Type":["1","2"],"Product Overview":"2 Flute, Ball End, Stub Length, Sphere Type, WXS","Neck Length - Metric (L1)":["5","10","15","20","30","40","50","60","25"],"Diameter - Metric (D)":["1","2","3","4","6","8","10","12","5"],"Helix Angle - Degree":"30","Length of Cut - Metric (Lc)":["0.7","1.5","2.3","3","4","5.4","6.7","8.1","3.5"],"Web Literature 4":"800388CA","Feature 2":"High Precision geometry - All corner radius & ball mills have +/-5um radius tolerance","Stainless Steels : 300":"M; Good","Feature 3":"High strength core diameter","Benefit 4":"Higher coating oxidation temp & hardness dramatically improve wear resistance.","Stainless Steels : 400":["M; Good"],"Web Video 2":"https://youtu.be/dNdGq78-DvA","Web Literature 1":"8002024CA-EM,279|8002024CA-EMT,149","Web Video 1":"https://youtu.be/gJImj11Ubbg","End Cut Type":"Ball Nose","Hardened Steels : 35 HRC":"H; Best","Web Literature 2":"800304CA","Hardened Steels : 35-45 HRC":"H; Best","Alloy Steels : 4140; 4340":"P; Best","Hardened Steels : 45-50 HRC":"H; Best","Substrate":"Carbide","Hardened Steels : 50-70 HRC":"H; Best","Die Steels":"P; Best","Cast Iron":"K; Best","High Carbon Steel : 1065":"P; Best","Cutting Type":"Center Cutting","Low Carbon Steel : 1010; 1018":"P; Best","Medium Carbon Steel : 1035; 1045":"P; Best","Shank Tolerance":"h6","Benefit 2":"High accuracy all but eliminates need for benching and rework for mold makers.","Stainless Steels : 17-4PH":"M; Good","View Catalog Page":"Here","View Speed and Feed Page":"Here","Units":"Metric","Weldon Flat":"No","Coolant Thru":"No","Surface Treatment":"WXS","Feature 4":"WXS coating has a +1300 Celsius Oxidation Temp. & +3500Hv in hardness","List Name":"WXS-EQD","Mill Type":"Single End","Full Description":"Premium High Performance Carbide End Mills for Hardened Steels","Short Description":"Premium High Performance Carbide End Mills for Hardened Steels","Type (feature)":"Sphere","Cutting Direction":"RH","Length of Cut - Specification":"STUB","Benefit 1":"The hardest most wear resistant carbide possible for incredible wear resistance.","Helix Direction":"RH","Benefit 3":"Tools utilize thicker core diameters for the ultimate in strength and rigidity.","Radius Tolerance - Metric":["+/- 0.010","+/- 0.015"],"Feature 1":"Ultra-fine micrograin carbide","DXF Drawing":["Download","Download","Download","Download","Download","Download","Download","Download","Download"],"STP Drawing":["Download","Download","Download","Download","Download","Download","Download","Download","Download"],"Neck Taper Angle - Degree (α)":"1.5","CategoryBrand":"EXOCARB","Diameter-Sizes":"1mm - 12mm","Flute-Sizes":"-","Neck-Sizes":"5mm - 60mm","Taper-Sizes":"-","Overall-Sizes":"60mm - 110mm","Shank-Sizes":"6mm - 12mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%204513/End_Mills_-_End_Mill_-_EXOCARB_WXS_-_List_4513_-_Catalog"],"Friendly Name":"4513"}
4530

4530

{"Length of Cut - Metric (Lc)":"22","Number of Flutes":"4","Overall Length - Metric (L)":["110"],"Shank Diameter - Metric (d)":["12"],"Corner Radius - Metric (R)":"6","Helix Angle - Degree":"30","Diameter - Metric (D)":["12"],"Product Overview":"4 Flute, Ball End, Stub Length, \"True\" Four Flute, WXS","Feature 2":"High Precision geometry - All corner radius & ball mills have +/-5um radius tolerance","Stainless Steels : 300":"M; Good","Feature 3":"High strength core diameter","Benefit 4":"Higher coating oxidation temp & hardness dramatically improve wear resistance.","Stainless Steels : 400":["M; Good"],"Web Video 2":"https://youtu.be/dNdGq78-DvA","Web Video 1":"https://youtu.be/gJImj11Ubbg","End Cut Type":"Ball Nose","Hardened Steels : 35 HRC":"H; Best","Hardened Steels : 35-45 HRC":"H; Best","Alloy Steels : 4140; 4340":"P; Best","Hardened Steels : 45-50 HRC":"H; Best","Substrate":"Carbide","Hardened Steels : 50-70 HRC":"H; Best","Die Steels":"P; Best","Cast Iron":"K; Best","High Carbon Steel : 1065":"P; Best","Cutting Type":"Center Cutting","Low Carbon Steel : 1010; 1018":"P; Best","Medium Carbon Steel : 1035; 1045":"P; Best","Shank Tolerance":"h6","Benefit 2":"High accuracy all but eliminates need for benching and rework for mold makers.","Stainless Steels : 17-4PH":"M; Good","Units":"Metric","Weldon Flat":"No","Coolant Thru":"No","Surface Treatment":"WXS","Feature 4":"WXS coating - +1300 Celsius Oxidation Temp. & +3500Hv in hardness","List Name":"WXS-EBM","Mill Type":"Single End","Full Description":"Premium High Performance Carbide End Mills for Hardened Steels","Short Description":"Premium High Performance Carbide End Mills for Hardened Steels","Cutting Direction":"RH","Length of Cut - Specification":"STUB","Benefit 1":"The hardest most wear resistant carbide possible for incredible wear resistance.","Helix Direction":"RH","Benefit 3":"Tools utilize thicker core diameters for the ultimate in strength and rigidity.","Radius Tolerance - Metric":"+/- 0.015","Feature 1":"Ultra-fine micrograin carbide","CategoryBrand":"EXOCARB","Diameter-Sizes":"12mm","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"110mm","Shank-Sizes":"12mm","Friendly Name":"4530"}
4581

4581

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%204581/End_Mills_-_End_Mill_-_EXOCARB_WXS_-_List_4581_-_Catalog"],"Length of Cut - Metric (Lc)":["8","12","10","25","20","16"],"Number of Flutes":"4","Corner Radius - Metric (R)":["0.5","0.75","1","1.25"],"Overall Length - Metric (L)":["45","55","50"],"Shank Diameter - Metric (d)":["4"],"Cut Incline Angle - Degree (α)":["0.5","1.5","2","1","0.75"],"Helix Angle - Degree":"25","Taper Diameter - Metric (Ds)":["1.13","1.39","1.8","1.82","1.9","2.09","2.29","2.42","2.5","2.63","2.84","2.58","3","3.33","3.27","3.74"],"Diameter - Metric (D)":["1","1.5","2","2.5"],"Product Overview":"4 Flute, Ball End, Tapered, Rib Processing, WXS","Web Literature 4":"800388CA","Feature 2":"High Precision geometry - All corner radius & ball mills have +/-5um radius tolerance","Stainless Steels : 300":"M; Good","Feature 3":"High strength core diameter","Benefit 4":"Higher coating oxidation temp & hardness dramatically improve wear resistance.","Stainless Steels : 400":"M; Good","Length of Cut - Specification":["EXTRA LONG","LONG"],"Web Video 2":"https://youtu.be/dNdGq78-DvA","Web Literature 1":"8002024CA-EM,280|8002024CA-EMT,150","Web Video 1":"https://youtu.be/gJImj11Ubbg","End Cut Type":"Ball Nose","Hardened Steels : 35 HRC":"H; Best","Web Literature 2":"800304CA","Hardened Steels : 35-45 HRC":"H; Best","Alloy Steels : 4140; 4340":"P; Best","Hardened Steels : 45-50 HRC":"H; Best","Substrate":"Carbide","Die Steels":"P; Best","Cast Iron":"K; Best","High Carbon Steel : 1065":"P; Best","Cutting Type":"Center Cutting","Low Carbon Steel : 1010; 1018":"P; Best","Hardened Steels : 50-70 HRC":"H; Good","Medium Carbon Steel : 1035; 1045":"P; Best","Shank Tolerance":"h6","Benefit 2":"High accuracy all but eliminates need for benching and rework for mold makers.","Stainless Steels : 17-4PH":"M; Good","View Catalog Page":"Here","View Speed and Feed Page":"Here","Units":"Metric","Weldon Flat":"No","Coolant Thru":"No","Surface Treatment":"WXS","Feature 4":"WXS coating - +1300 Celsius Oxidation Temp. & +3500Hv in hardness","List Name":"WXS-RB-TPB","Mill Type":"Single End","Full Description":"Premium High Performance Carbide End Mills for Hardened Steels","Short Description":"Premium High Performance Carbide End Mills for Hardened Steels","Cutting Direction":"RH","Type (feature)":"Tapered","Benefit 1":"The hardest most wear resistant carbide possible for incredible wear resistance.","Helix Direction":"RH","Cut Incline Angle Tolerance - Degree":"+/- 0°5'","Benefit 3":"Tools utilize thicker core diameters for the ultimate in strength and rigidity.","Feature 1":"Ultra-fine micrograin carbide","Diameter-Sizes":"1mm - 2.5mm","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"45mm - 55mm","Shank-Sizes":"4mm","Friendly Name":"4581","CategoryBrand":"EXOCARB"}
4590

4590

{"Number of Flutes":"2","Corner Radius - Metric (R)":["0.1","0.25","0.3","0.05","0.15","0.2","0.4","0.5","0.6","0.75","0.8","1","1.25","1.5","1.75","2","2.5","3"],"Neck Diameter - Metric (d1)":["0.18","0.45","0.55","0.09","0.28","0.37","0.75","0.95","1.15","1.45","1.55","1.95","2.35","2.85","3.35","3.85","4.85","5.85"],"Overall Length - Metric (L)":["45","50","55","60","70","65","80","90","100","120"],"Shank Diameter - Metric (d)":["4","6"],"Radius Tolerance - Metric":["+0 / -0.005","+0 / -0.007"],"Type":["1","2"],"Neck Length - Metric (L1)":["0.75","1.75","4.5","2.5","7.5","9.5","0.3","1.5","0.8","3.5","5.5","6","5","10","11","12","8","14","16","18","20","22","30","35","25","15","40","45","50"],"Product Overview":"2 Flute, Ball End, Stub Length, Rib Processing Series, WXS","Diameter - Metric (D)":["0.2","0.5","0.6","0.1","0.3","0.4","0.8","1","1.2","1.5","1.6","2","2.5","3","3.5","4","5","6"],"Helix Angle - Degree":"30","Length of Cut - Metric (Lc)":["0.16","0.4","0.5","0.08","0.24","0.3","0.6","0.8","1","1.2","1.3","1.6","2","2.4","2.8","3.2","4","4.8"],"Feature 2":"High Precision geometry - All corner radius & ball mills have +/-5um radius tolerance","Stainless Steels : 300":"M; Good","Feature 3":"High strength core diameter","Benefit 4":"Higher coating oxidation temp & hardness dramatically improve wear resistance.","Stainless Steels : 400":["M; Good"],"Web Video 2":"https://youtu.be/dNdGq78-DvA","End Cut Type":"Ball Nose","Web Video 1":"https://youtu.be/gJImj11Ubbg","Hardened Steels : 35-45 HRC":"H; Best","Substrate":"Carbide","Hardened Steels : 45-50 HRC":"H; Best","Hardened Steels : 50-70 HRC":"H; Best","Hardened Steels : 35 HRC":"H; Good","Cutting Type":"Center Cutting","Cast Iron":"K; Good","Type (feature)":"Long Neck","Shank Tolerance":"h6","Alloy Steels : 4140; 4340":"P; Good","Benefit 2":"High accuracy all but eliminates need for benching and rework for mold makers.","Die Steels":"P; Good","High Carbon Steel : 1065":"P; Good","Stainless Steels : 17-4PH":"M; Good","Low Carbon Steel : 1010; 1018":"P; Good","Medium Carbon Steel : 1035; 1045":"P; Good","Units":"Metric","Weldon Flat":"No","Coolant Thru":"No","Surface Treatment":"WXS","Feature 4":"WXS coating - +1300 Celsius Oxidation Temp. & +3500Hv in hardness","List Name":"WXS-LN-EBD","Mill Type":"Single End","Full Description":"Premium High Performance Carbide End Mills for Hardened Steels","Short Description":"Premium High Performance Carbide End Mills for Hardened Steels","Cutting Direction":"RH","Length of Cut - Specification":"STUB","Benefit 1":"The hardest most wear resistant carbide possible for incredible wear resistance.","Helix Direction":"RH","Benefit 3":"Tools utilize thicker core diameters for the ultimate in strength and rigidity.","Feature 1":"Ultra-fine micrograin carbide","Nickel Alloy : Inconel":"S; Good","Titanium : 6AL4V (30HRC)":"S; Good","CategoryBrand":"EXOCARB","Diameter-Sizes":"0.1mm - 6mm","Flute-Sizes":"-","Neck-Sizes":"0.3mm - 50mm","Taper-Sizes":"-","Overall-Sizes":"45mm - 120mm","Shank-Sizes":"4mm - 6mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%204590/End_Mills_-_End_Mill_-_EXOCARB_WXS_-_List_4590_-_Catalog","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%204590/End_Mills_-_End_Mill_-_EXOCARB_WXS-LN-EBD_-_List_4590_-_Type_1_-_Angle","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%204590/End_Mills_-_End_Mill_-_EXOCARB_WXS-LN-EBD_-_List_4590_-_Type_2_-_Angle","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%204590/End_Mills_-_End_Mill_-_EXOCARB_WXS-LN-EBD_-_List_4590_-_Type_3_-_Angle","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%204590/End_Mills_-_End_Mill_-_EXOCARB_WXS_-_List_4590_-_Material_-_003","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%204590/End_Mills_-_End_Mill_-_EXOCARB_WXS_-_List_4590_-_Material_-_001"],"Friendly Name":"4590"}
4630

4630

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%204630/End_Mills_-_End_Mill_-_EXOCARB_AM-EBT_-_List_4630_-_Catalog_-_Type_2","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%204630/End_Mills_-_End_Mill_-_EXOCARB_AM-EBT_-_List_4630_-_Catalog_-_Type_1"],"Number of Flutes":"3","Corner Radius - Inch (R)":["0.046875","0.0625","0.09375","0.125","0.15625","0.1875","0.25"],"Neck Diameter - Inch (d1)":["0.0905","0.1181","0.1811"],"Effective Neck Length by Incline Angle 0.5° - Inch":["0.192","0.386","0.256","0.515","0.384","0.772"],"Neck Length - Inch (L1)":["0.4961","0.685","0.4921","0.7402","0.5039","0.878"],"Effective Neck Length by Incline Angle 1.5° - Inch":["0.203","0.411","0.27","0.547","0.406","0.821"],"Effective Neck Length by Incline Angle 1° - Inch":["0.197","0.398","0.263","0.531","0.395","0.796"],"Effective Neck Length by Incline Angle 2° - Inch":["0.209","0.424","0.278","0.566","0.417","0.849"],"Diameter - Inch (D)":["0.09375","0.125","0.1875","0.25","0.3125","0.375","0.5"],"Effective Neck Length by Incline Angle 3° - Inch":["0.222","0.455","0.296","0.607","0.444"],"Type":["1","2"],"Interference Angle - Degree (α)":["10.33","7.3819999999999997","8.4960000000000004","5.399","4.7679999999999998","2.4980000000000002"],"Non-Taper Neck Length - Inch (L2)":["0.1875","0.375","0.25","0.5","0.75"],"Length of Cut - Inch (Lc)":["0.09375","0.125","0.1875","0.25","0.3125","0.5625","0.75"],"Diameter - Fractional Size (D)":["3/32","1/8","3/16","1/4","5/16","3/8","1/2"],"Shank Diameter - Inch (d)":["0.25","0.3125","0.375","0.5"],"Overall Length - Inch (L)":["2","2.5","3","3.5","4"],"Helix Angle - Degree":"30","Feature 2":"3D Negative Robust Geometry","Web Literature 4":"800388CA","Surface Treatment":"DUROREY","Benefit 1":"enables superior heat resistance and high toughness optimized for high-hardness steel milling!","Stainless Steels : 300":"M; Good","Benefit 2":"Optimized for additive manufacturing, even applicable to large depth of cut","Web Video 1":"https://youtu.be/DaV7W29Hi-w","List Name":"AM-EBT","Web Literature 1":"8002024CA-EM,281|8002024CA-EMT,151","End Cut Type":"Ball Nose","Web Video 3":"https://youtu.be/rMW62-Jz2Ho","Web Video 2":"https://youtu.be/UIJdxi9oadc","Web Literature 2":"800316CA-V2","Hardened Steels : 35-45 HRC":"H; Best","Hardened Steels : 45-50 HRC":"H; Best","Units":"Inch","Substrate":"Carbide","Full Description":"Carbide End Mills Designed for Additive Manufacturing","Short Description":"Carbide End Mills Designed for Additive Manufacturing","Product Overview":"Carbide, Durorey Coating, Ball End, Inch Sizes","Cutting Type":"Center Cutting","Hardened Steels : 50-70 HRC":"H; Good","Shank Tolerance":"h4","Stainless Steels : 17-4PH":"M; Good","View Catalog Page":"Here","View Speed and Feed Page":"Here","Stainless Steels : 400":"M; Good","Feature 1":"Newly developed DUROREY coating","Weldon Flat":"No","Coolant Thru":"No","Mill Type":"Single End","Cutting Direction":"RH","Length of Cut - Specification":"STUB","Helix Direction":"RH","Cutting Diameter Tolerance - Inch":"+/- 0.0012","Nickel Alloy : Inconel":"S; Best","Titanium : 6AL4V (30HRC)":"S; Best","Diameter-Sizes":"3/32\" - 0.5\"","Flute-Sizes":"-","Neck-Sizes":"0.4921\" - 0.878\"","Taper-Sizes":"-","Overall-Sizes":"2\" - 4\"","Shank-Sizes":"0.25\" - 0.5\"","Friendly Name":"4630","CategoryBrand":"EXOCARB"}
464BN

464BN

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%20464BN/End_Mills_-_End_Mill_-_Carbide_-_List_464BN_-_Standard_Ball_End_-_Catalog"],"Number of Flutes":"4","Overall Length - Inch (L)":["5","2.25","3","4"],"Shank Diameter - Inch (d)":["1","0.125","0.1875","0.25","0.3125","0.375","0.4375","0.5","0.625","0.75"],"Corner Radius - Inch (R)":["0.5","0.0625","0.09375","0.125","0.15625","0.1875","0.21875","0.25","0.3125","0.375"],"Cutting Diameter Tolerance - Inch":"+0 / -0.002","Diameter - Fractional Size (D)":["1","1/8","3/16","1/4","5/16","3/8","7/16","1/2","5/8","3/4"],"Diameter - Inch (D)":["1","0.125","0.1875","0.25","0.3125","0.375","0.4375","0.5","0.625","0.75"],"Helix Angle - Degree":"30","Length of Cut - Inch (Lc)":["2.25","0.75","1.125","2"],"Product Overview":"4 Flute, Long Length, Ball End","Web Literature 4":"800388CA","Stainless Steels : 300":"M; Good","Web Literature 1":"8002024CA-EM,316|8002024CA-EMT,168","End Cut Type":"Ball Nose","Notes":"Other coatings available upon request.","Surface Treatment":["BRIGHT","TiAlN","TiCN"],"Units":["Inch","Metric"],"Substrate":"Carbide","Hardened Steels : 35 HRC":"H; Good","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":"Center Cutting","Cast Iron":"K; Good","Hardened Steels : 45-50 HRC":"H; Good","Alloy Steels : 4140; 4340":"P; Good","Die Steels":"P; Good","High Carbon Steel : 1065":"P; Good","Low Carbon Steel : 1010; 1018":"P; Good","View Catalog Page":"Here","View Speed and Feed Page":"Here","Stainless Steels : 400":"M; Good","Aluminum : Casting":"N; Good","Weldon Flat":"No","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Good","Medium Carbon Steel : 1035; 1045":"P; Good","Mill Type":"Single End","Length of Cut - Specification":["REGULAR","EXTRA LONG","LONG"],"List Name":"STANDARD CARBIDE BN","Full Description":"Standard Carbide End Mills for General Milling Applications","Short Description":"Standard Carbide End Mills for General Milling Applications","Cutting Direction":"RH","Helix Direction":"RH","Length of Cut - Metric (Lc)":["19","25","28","29","32","51","57"],"Diameter - Metric (D)":["3","4","5","6","8","10","12","14","16","18","20","25"],"Corner Radius - Metric (R)":["1.5","2","2.5","3","4","5","6","7","8","9","10","12.5"],"Shank Diameter - Metric (d)":["3","4","5","6","8","10","12","14","16","18","20","25"],"Overall Length - Metric (L)":["57","64","76","102","127"],"Cutting Diameter Tolerance - Metric":"+0 / -0.050","Diameter-Sizes":"3mm - 1\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"57mm - 127mm","Shank-Sizes":"3mm - 1\"","Friendly Name":"464BN","CategoryBrand":"OSG"}
4730

4730

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%204730/End_Mills_-_End_Mill_-_EXOCARB_AM-EBT_-_List_4730_-_Catalog_-_Type_2","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%204730/End_Mills_-_End_Mill_-_EXOCARB_AM-EBT_-_List_4730_-_Catalog_-_Type_1"],"Number of Flutes":"3","Length of Cut - Metric (Lc)":["2","3","4","5","9","12","15","18","24","30"],"Neck Diameter - Metric (d1)":["1.95","2.85","3.85","4.85"],"Corner Radius - Metric (R)":["1","1.5","2","2.5","3","4","5","6","8","10"],"Effective Neck Length by Incline Angle 0.5° - Metric":["4.19","8.33","6.44","12.64","8.49","16.76","10.54","20.87"],"Effective Neck Length by Incline Angle 1.5° - Metric":["4.42","8.86","6.79","13.44","8.96","17.82","11.12"],"Effective Neck Length by Incline Angle 1° - Metric":["4.33","5.58","6.61","13.03","8.71","17.27","10.82","21.52"],"Effective Neck Length by Incline Angle 2° - Metric":["4.55","9.15","7","13.89","9.22","18.42","11.45"],"Effective Neck Length by Incline Angle 3° - Metric":["4.85","9.82","7.45","14.91","9.81","19.76"],"Overall Length - Metric (L)":["60","70","80","90","105","110"],"Shank Diameter - Metric (d)":["6","8","10","12","16","20"],"Type":["1","2"],"Neck Length - Metric (L1)":["11.9","15.9","11.8","17.8","12","20","12.1","22.1"],"Interference Angle - Degree (α)":["10.64","7.79","8.15","5.22","5.65","3.17","2.95","1.46"],"Non-Taper Neck Length - Metric (L2)":["4","8","6","12","16","10","20"],"Helix Angle - Degree":"30","Diameter - Metric (D)":["2","3","4","5","6","8","10","12","16","20"],"Web Literature 4":"800388CA","Feature 2":"3D Negative Robust Geometry","Surface Treatment":"DUROREY","Benefit 1":"enables superior heat resistance and high toughness optimized for high-hardness steel milling!","Stainless Steels : 300":"M; Good","Stainless Steels : 400":"M; Good","Benefit 2":"Optomized for additive manufacturing, even applicable to large depth of cut","Web Video 1":"https://youtu.be/DaV7W29Hi-w","List Name":"AM-EBT","Web Literature 1":"8002024CA-EM,282|8002024CA-EMT,151","End Cut Type":"Ball Nose","Web Video 3":"https://youtu.be/rMW62-Jz2Ho","Web Video 2":"https://youtu.be/UIJdxi9oadc","Hardened Steels : 35-45 HRC":"H; Best","Web Literature 2":"800316CA-V2","Substrate":"Carbide","Hardened Steels : 45-50 HRC":"H; Best","Full Description":"Carbide End Mills Designed for Additive Manufacturing","Short Description":"Carbide End Mills Designed for Additive Manufacturing","Product Overview":"Carbide, Durorey Coating, Ball End, Metric Sizes","Cutting Type":"Center Cutting","Hardened Steels : 50-70 HRC":"H; Good","Shank Tolerance":"h4","Stainless Steels : 17-4PH":"M; Good","View Catalog Page":"Here","View Speed and Feed Page":"Here","Units":"Metric","Feature 1":"Newly developed DUROREY coating","Weldon Flat":"No","Coolant Thru":"No","Mill Type":"Single End","Cutting Direction":"RH","Length of Cut - Specification":"STUB","Helix Direction":"RH","Cutting Diameter Tolerance - Metric":"+/- 0.030","Nickel Alloy : Inconel":"S; Best","Titanium : 6AL4V (30HRC)":"S; Best","Diameter-Sizes":"2mm - 20mm","Flute-Sizes":"-","Neck-Sizes":"11.8mm - 22.1mm","Taper-Sizes":"-","Overall-Sizes":"60mm - 110mm","Shank-Sizes":"6mm - 20mm","Friendly Name":"4730","CategoryBrand":"EXOCARB"}
484BN

484BN

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%20484BN/End_Mills_-_End_Mill_-_Carbide_-_List_484BN_-_Standard_Ball_End_-_Catalog"],"Number of Flutes":"4","Overall Length - Inch (L)":["6","3","4"],"Shank Diameter - Inch (d)":["1","0.125","0.1875","0.25","0.3125","0.375","0.4375","0.5","0.625","0.75"],"Corner Radius - Inch (R)":["0.5","0.0625","0.09375","0.125","0.15625","0.1875","0.21875","0.25","0.3125","0.375"],"Cutting Diameter Tolerance - Inch":"+0 / -0.002","Diameter - Fractional Size (D)":["1","1/8","3/16","1/4","5/16","3/8","7/16","1/2","5/8","3/4"],"Diameter - Inch (D)":["1","0.125","0.1875","0.25","0.3125","0.375","0.4375","0.5","0.625","0.75"],"Helix Angle - Degree":"30","Length of Cut - Inch (Lc)":["3","1","1.125","1.5","1.625","1.75"],"Product Overview":"4 Flute, Extra Long Length","Web Literature 4":"800388CA","Stainless Steels : 300":"M; Good","Web Literature 1":"8002024CA-EM,317|8002024CA-EMT,168","End Cut Type":"Ball Nose","Notes":"Other coatings available upon request.","Surface Treatment":["BRIGHT","TiAlN"],"Units":["Inch","Metric"],"Substrate":"Carbide","Hardened Steels : 35 HRC":"H; Good","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":"Center Cutting","Cast Iron":"K; Good","Alloy Steels : 4140; 4340":"P; Good","Die Steels":"P; Good","High Carbon Steel : 1065":"P; Good","Low Carbon Steel : 1010; 1018":"P; Good","View Catalog Page":"Here","View Speed and Feed Page":"Here","Stainless Steels : 400":"M; Good","Aluminum : Casting":"N; Good","Weldon Flat":"No","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Good","Medium Carbon Steel : 1035; 1045":"P; Good","Mill Type":"Single End","Length of Cut - Specification":["REGULAR","EXTRA LONG","LONG"],"List Name":"STANDARD CARBIDE BN","Full Description":"Standard Carbide End Mills for General Milling Applications","Short Description":"Standard Carbide End Mills for General Milling Applications","Cutting Direction":"RH","Helix Direction":"RH","Aramid Fiber (AFRP)":"-","Benefit 1":"-","Benefit 2":"-","Benefit 3":"-","Benefit 4":"-","Bottom Edge Radius - Metric (R2)":"-","Brass, Bronze":"-","Carbon Fiber (CFRP)":"-","Carbon Fiber / Al / Ti / CRES Stack":"-","Carbon Fiber / Aluminum Stack":"-","Carbon Fiber / Titanium Stack":"-","Carbon/Carbon":"-","Coating Thickness (µm)":"-","Cobalt-Chrome":"-","Compatible Machine":"-","Compression Length - Inch (L2)":"-","Contour Milling":"-","Corner Chamfer - Inch (C)":"-","Corner Chamfer - Metric (C)":"-","Corner Radius - Metric (R)":["1.5","2","2.5","3","4","5","6","7","8","9","10","12.5"],"Cut Incline Angle - Degree (α)":"-","Cut Incline Angle Tolerance - Degree":"-","Cutting Diameter Tolerance - Metric":"+0 / -0.050","Deep Side Milling":"-","Diameter - Metric (D)":["3","4","5","6","8","10","12","14","16","18","20","25"],"Diameter at Center of Radius - Metric (dm)":"-","Edge Radius - Metric (R3)":"-","Effective Diameter - Inch (DCF)":"-","Effective Diameter - Metric (DCF)":"-","Effective Draft Angle - Degree (α)":"-","Effective Neck Length by Incline Angle 0.5° - Inch":"-","Effective Neck Length by Incline Angle 0.5° - Metric":"-","Effective Neck Length by Incline Angle 0° - Inch":"-","Effective Neck Length by Incline Angle 0° - Metric":"-","Effective Neck Length by Incline Angle 1.5° - Inch":"-","Effective Neck Length by Incline Angle 1.5° - Metric":"-","Effective Neck Length by Incline Angle 1° - Inch":"-","Effective Neck Length by Incline Angle 1° - Metric":"-","Effective Neck Length by Incline Angle 2.5° - Metric":"-","Effective Neck Length by Incline Angle 2° - Inch":"-","Effective Neck Length by Incline Angle 2° - Metric":"-","Effective Neck Length by Incline Angle 3° - Inch":"-","Effective Neck Length by Incline Angle 3° - Metric":"-","Effective Radius - Metric (rt)":"-","Feature 1":"-","Feature 2":"-","Feature 3":"-","Feature 4":"-","Form Tolerance - Metric":"-","Glass Ceramics":"-","Glass Fiber (GFRP)":"-","Graphite":"-","Hardened Steels : 45-50 HRC":"-","Hardened Steels : 50-70 HRC":"-","Helical Milling":"-","Honeycomb: AFRP":"-","Honeycomb: AI/AI":"-","Honeycomb: CFRP/AI":"-","Honeycomb: CFRP/Nomex":"-","Honeycomb: GFRP/Nomex":"-","Hybrid Ceramic / Composite":"-","Included Angle - Degree (α)":"-","Interference Angle - Degree (α)":"-","L/D Ratio":"-","Length of Cut - Metric (Lc)":["25","28","32","38","42","45","76"],"Length to Center of Radius - Metric (Lm)":"-","Magnesium":"-","Neck Diameter - Inch (d1)":"-","Neck Diameter - Metric (d1)":"-","Neck Diameter Max - Inch (d1 Max)":"-","Neck Diameter Max - Metric (d1 Max)":"-","Neck Diameter Min - Inch (d1 Min)":"-","Neck Diameter Min - Metric (d1 Min)":"-","Neck Draft Angle - Degree (ß)":"-","Neck Length - Inch (L1)":"-","Neck Length - Metric (L1)":"-","Neck Taper Angle - Degree (α)":"-","Nickel Alloy : Inconel":"-","Non-Taper Neck Length - Inch (L2)":"-","Non-Taper Neck Length - Metric (L2)":"-","Overall Length - Metric (L)":["76","102","153"],"PEEK":"-","Peripheral Edge Radius - Metric (R2)":"-","Plunging":"-","Radius Tolerance - Inch":"-","Radius Tolerance - Metric":"-","Ramping":"-","Shank Diameter - Metric (d)":["3","4","5","6","8","10","12","14","16","18","20","25"],"Shank Tolerance":"-","Side Milling":"-","Slotting":"-","Stainless Steels : 17-4PH":"-","Taper Angle Tolerance - Degree":"-","Taper Diameter - Metric (Ds)":"-","Taper per Side - Degree (α)":"-","Tilt Angle - Degree (α/2)":"-","Tip Radius - Metric (R1)":"-","Titanium":"-","Titanium : 6AL4V (30HRC)":"-","Trochoidal Milling":"-","Type":"-","Type (feature)":"-","Wax/PMMA":"-","Web Literature 2":"-","Web Literature 3":"-","Web Video 1":"-","Web Video 2":"-","Web Video 3":"-","Zirconia":"-","Diameter-Sizes":"3mm - 1\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"76mm - 153mm","Shank-Sizes":"3mm - 1\"","Friendly Name":"484BN","CategoryBrand":"OSG"}
521

521

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%20521/End_Mills_-_End_Mill_-_Single_End_Mills_-_List_521_-_Ball_End_-_Catalog"],"Number of Flutes":"2","Corner Radius - Inch (R)":["0.0625","0.09375","0.125","0.15625","0.1875","0.25","0.28125","0.3125","0.375","0.4375","0.5","0.5625","0.625","0.75","0.21875"],"Diameter - Inch (D)":["0.125","0.1875","0.25","0.3125","0.375","0.5","0.5625","0.625","0.75","0.875","1","1.125","1.25","1.5","0.4375"],"Cutting Diameter Tolerance - Inch":"+0.0011 / -0","Diameter - Fractional Size (D)":["1/8","3/16","1/4","5/16","3/8","1/2","9/16","5/8","3/4","7/8","1","1-1/8","1-1/4","1-1/2","7/16"],"Product Overview":"2 Flute, HSS-Co, Regular Length, Ball End, Two Flute","Length of Cut - Inch (Lc)":["0.375","0.5","0.625","0.75","1.5","1","1.125","1.3125","1.375","1.625","1.875","2.25","2","3","2.5"],"Overall Length - Inch (L)":["2.3125","2.375","2.4375","2.5","3.25","3","3.125","3.3125","3.5","3.875","4.125","4.5","4.25","5.25","4.75","5","4"],"Helix Angle - Degree":"30","Shank Diameter - Inch (d)":["0.375","0.5","0.625","0.75","0.875","1","1.25"],"Web Literature 4":"800388CA","Stainless Steels : 300":"M; Good","Substrate":"HSS-CO","Web Literature 1":"8002024CA-EM,321|8002024CA-EMT,170","End Cut Type":"Ball Nose","Notes":"Other coatings available upon request.","Surface Treatment":"BRIGHT","Units":"Inch","Hardened Steels : 35 HRC":"H; Good","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":"Center Cutting","Cast Iron":"K; Good","Low Carbon Steel : 1010; 1018":"P; Best","List Name":"COBALT HSS EBD","Medium Carbon Steel : 1035; 1045":"P; Best","Alloy Steels : 4140; 4340":"P; Good","Full Description":"High Performance Cobalt HSS End Mills for General Milling Applications","Short Description":"High Performance Cobalt HSS End Mills for General Milling Applications","Die Steels":"P; Good","Stainless Steels : 17-4PH":"M; Good","High Carbon Steel : 1065":"P; Good","View Catalog Page":"Here","View Speed and Feed Page":"Here","Stainless Steels : 400":"M; Good","Aluminum : Casting":"N; Good","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Good","Weldon Flat":"Yes","Mill Type":"Single End","Length of Cut - Specification":["REGULAR","LONG","STUB"],"Cutting Direction":"RH","Helix Direction":"RH","Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"1/8\" - 1.5\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"2.3125\" - 5.25\"","Shank-Sizes":"0.375\" - 1.25\"","Friendly Name":"521","CategoryBrand":"OSG"}
523

523

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%20523/End_Mills_-_End_Mill_-_Double_End_Mills_-_List_523_-_Catalog"],"Overall Length - Inch (L)":["3.0625","3.125","3.75","4.5","5","5.875"],"Number of Flutes":"2","Corner Radius - Inch (R)":["0.0625","0.09375","0.125","0.15625","0.1875","0.25","0.3125","0.375","0.5","0.21875"],"Diameter - Inch (D)":["0.125","0.1875","0.25","0.3125","0.375","0.5","0.625","0.75","1","0.4375"],"Diameter - Fractional Size (D)":["1/8","3/16","1/4","5/16","3/8","1/2","5/8","3/4","1","7/16"],"Product Overview":"2 Flute, HSS-Co, Regular Length, Two Flute, Ball End","Length of Cut - Inch (Lc)":["0.375","0.4375","0.5","0.5625","0.8125","1.125","1.3125","1.625"],"Helix Angle - Degree":"30","Shank Diameter - Inch (d)":["0.375","0.5","0.625","0.75","1"],"Web Literature 4":"800388CA","Stainless Steels : 300":"M; Good","Substrate":"HSS-CO","Web Literature 1":"8002024CA-EM,325|8002024CA-EMT,170","End Cut Type":"Ball Nose","Notes":"Other coatings available upon request.","Surface Treatment":"BRIGHT","Units":"Inch","Hardened Steels : 35 HRC":"H; Good","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":"Center Cutting","Cast Iron":"K; Good","Low Carbon Steel : 1010; 1018":"P; Best","List Name":"COBALT HSS DOUBLE END DDEB","Medium Carbon Steel : 1035; 1045":"P; Best","Alloy Steels : 4140; 4340":"P; Good","Mill Type":"Double End","Full Description":"High Performance Cobalt HSS End Mills for General Milling Applications","Short Description":"High Performance Cobalt HSS End Mills for General Milling Applications","Die Steels":"P; Good","Stainless Steels : 17-4PH":"M; Good","High Carbon Steel : 1065":"P; Good","View Catalog Page":"Here","View Speed and Feed Page":"Here","Stainless Steels : 400":"M; Good","Aluminum : Casting":"N; Good","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Good","Weldon Flat":"Yes","Length of Cut - Specification":["REGULAR","STUB"],"Cutting Direction":"RH","Helix Direction":"RH","Cutting Diameter Tolerance - Inch":["+0 / -0.0011","-0.0004 / -0.0015"],"Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"1/8\" - 1\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"3.0625\" - 5.875\"","Shank-Sizes":"0.375\" - 1\"","Friendly Name":"523","CategoryBrand":"OSG"}
526

526

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%20526/End_Mills_-_End_Mill_-_Single_End_Mills_-_List_526_-_Ball_End_-_Catalog"],"Number of Flutes":"2","Corner Radius - Inch (R)":["0.0625","0.09375","0.125","0.15625","0.1875","0.25","0.3125","0.375","0.5","0.21875"],"Neck Length - Inch (L1)":["0.8125","1.125","1.5","1.75","2.25","2.75","3.375","5","1.875"],"Diameter - Inch (D)":["0.125","0.1875","0.25","0.3125","0.375","0.5","0.625","0.75","1","0.4375"],"Cutting Diameter Tolerance - Inch":"+0.0011 / -0","Diameter - Fractional Size (D)":["1/8","3/16","1/4","5/16","3/8","1/2","5/8","3/4","1","7/16"],"Product Overview":"2 Flute, HSS-Co, Regular Length, Ball End, Two Flute, Extension Type","Length of Cut - Inch (Lc)":["0.375","0.5","0.625","0.75","1","1.375","1.625","2.5"],"Overall Length - Inch (L)":["2.375","2.6875","3.0625","3.3125","4","4.625","5.375","7.25","3.6875"],"Helix Angle - Degree":"30","Shank Diameter - Inch (d)":["0.375","0.5","0.625","0.75","1"],"Web Literature 4":"800388CA","Stainless Steels : 300":"M; Good","Substrate":"HSS-CO","Web Literature 1":"8002024CA-EM,322|8002024CA-EMT,170","End Cut Type":"Ball Nose","Notes":"Other coatings available upon request.","Surface Treatment":"BRIGHT","Units":"Inch","Hardened Steels : 35 HRC":"H; Good","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":"Center Cutting","Cast Iron":"K; Good","Low Carbon Steel : 1010; 1018":"P; Best","List Name":"COBALT HSS LS-EBD","Medium Carbon Steel : 1035; 1045":"P; Best","Alloy Steels : 4140; 4340":"P; Good","Full Description":"High Performance Cobalt HSS End Mills for General Milling Applications","Short Description":"High Performance Cobalt HSS End Mills for General Milling Applications","Die Steels":"P; Good","Stainless Steels : 17-4PH":"M; Good","High Carbon Steel : 1065":"P; Good","View Catalog Page":"Here","View Speed and Feed Page":"Here","Stainless Steels : 400":"M; Good","Aluminum : Casting":"N; Good","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Good","Weldon Flat":"Yes","Mill Type":"Single End","Type (feature)":"Reduced Neck","Length of Cut - Specification":"REGULAR","Cutting Direction":"RH","Helix Direction":"RH","Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"1/8\" - 1\"","Flute-Sizes":"-","Neck-Sizes":"0.8125\" - 5\"","Taper-Sizes":"-","Overall-Sizes":"2.375\" - 7.25\"","Shank-Sizes":"0.375\" - 1\"","Friendly Name":"526","CategoryBrand":"OSG"}
544

544

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%20544/End_Mills_-_End_Mill_-_Single_End_Multiple_Flute_-_List_544_-_Catalog"],"Number of Flutes":"4","Corner Radius - Inch (R)":["0.1875","0.25","0.3125","0.375","0.4375","0.5","0.625","0.75","0.21875"],"Cutting Diameter Tolerance - Inch":"+0.0011 / -0","Diameter - Inch (D)":["0.375","0.5","0.625","0.75","0.875","1","1.25","1.5","0.4375"],"Diameter - Fractional Size (D)":["3/8","1/2","5/8","3/4","7/8","1","1-1/4","1-1/2","7/16"],"Length of Cut - Inch (Lc)":["0.75","1.25","1.625","2.5","1.875","2"],"Helix Angle - Degree":"30","Overall Length - Inch (L)":["2.5","3.25","3.75","4.625","3.875","4.125","4.5"],"Shank Diameter - Inch (d)":["0.375","0.5","0.625","0.75","0.875","1","1.25"],"Product Overview":"4 Flute, HSS-Co, Regular Length, Ball End","Web Literature 4":"800388CA","Stainless Steels : 300":"M; Good","Substrate":"HSS-CO","Web Literature 1":"8002024CA-EM,323|8002024CA-EMT,170","End Cut Type":"Ball Nose","Notes":"Other coatings available upon request.","Surface Treatment":"BRIGHT","Alloy Steels : 4140; 4340":"P; Best","Units":"Inch","Die Steels":"P; Best","Hardened Steels : 35 HRC":"H; Good","High Carbon Steel : 1065":"P; Best","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":"Center Cutting","Cast Iron":"K; Good","Low Carbon Steel : 1010; 1018":"P; Best","List Name":"COBALT HSS EBM","Medium Carbon Steel : 1035; 1045":"P; Best","Full Description":"High Performance Cobalt HSS End Mills for General Milling Applications","Short Description":"High Performance Cobalt HSS End Mills for General Milling Applications","Stainless Steels : 17-4PH":"M; Good","View Catalog Page":"Here","View Speed and Feed Page":"Here","Aluminum : 6061; 7075":"N; Good","Stainless Steels : 400":"M; Good","Aluminum : Casting":"N; Good","Coolant Thru":"No","Weldon Flat":"Yes","Mill Type":"Single End","Length of Cut - Specification":["REGULAR","LONG","STUB"],"Cutting Direction":"RH","Helix Direction":"RH","Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"3/8\" - 1.5\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"2.5\" - 4.625\"","Shank-Sizes":"0.375\" - 1.25\"","Friendly Name":"544","CategoryBrand":"OSG"}
570

570

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%20570/End_Mills_-_End_Mill_-_Double_End_Mills_-_List_570_-_Catalog"],"Number of Flutes":"2","Corner Radius - Inch (R)":["0.03125","0.046875","0.0625","0.078125","0.09375"],"Diameter - Inch (D)":["0.0625","0.09375","0.125","0.15625","0.1875"],"Diameter - Fractional Size (D)":["1/16","3/32","1/8","5/32","3/16"],"Product Overview":"2 Flute, HSS-Co, Stub Length, Miniature, Ball End","Shank Diameter - Inch (d)":["0.1875"],"Length of Cut - Inch (Lc)":["0.09375","0.140625","0.1875","0.234375","0.28125"],"Overall Length - Inch (L)":["2"],"Helix Angle - Degree":"30","Web Literature 4":"800388CA","Stainless Steels : 300":"M; Good","Substrate":"HSS-CO","Web Literature 1":"8002024CA-EM,326","End Cut Type":"Ball Nose","Notes":"Other coatings available upon request.","Surface Treatment":"BRIGHT","Units":"Inch","Hardened Steels : 35 HRC":"H; Good","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":"Center Cutting","Cast Iron":"K; Good","Low Carbon Steel : 1010; 1018":"P; Best","List Name":"COBALT HSS DOUBLE END M-DDEB","Medium Carbon Steel : 1035; 1045":"P; Best","Alloy Steels : 4140; 4340":"P; Good","Mill Type":"Double End","Full Description":"High Performance Cobalt HSS End Mills for General Milling Applications","Short Description":"High Performance Cobalt HSS End Mills for General Milling Applications","Die Steels":"P; Good","High Carbon Steel : 1065":"P; Good","Stainless Steels : 17-4PH":"M; Good","View Catalog Page":"Here","Aluminum : 6061; 7075":"N; Good","Stainless Steels : 400":"M; Good","Aluminum : Casting":"N; Good","Weldon Flat":"No","Coolant Thru":"No","Cutting Direction":"RH","Length of Cut - Specification":"STUB","Helix Direction":"RH","Cutting Diameter Tolerance - Inch":["+0 / -0.0011","-0.0004 / -0.0015"],"Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"1/16\" - 0.1875\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"2\"","Shank-Sizes":"0.1875\"","Friendly Name":"570","CategoryBrand":"OSG"}
571

571

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%20571/End_Mills_-_End_Mill_-_Double_End_Mills_-_List_571_-_Catalog"],"Number of Flutes":"2","Corner Radius - Inch (R)":["0.03125","0.046875","0.0625","0.078125","0.09375"],"Diameter - Inch (D)":["0.0625","0.09375","0.125","0.15625","0.1875"],"Diameter - Fractional Size (D)":["1/16","3/32","1/8","5/32","3/16"],"Product Overview":"2 Flute, HSS-Co, Regular Length, Miniature, Ball End","Shank Diameter - Inch (d)":["0.1875"],"Length of Cut - Inch (Lc)":["0.1875","0.28125","0.375","0.4375","0.5"],"Overall Length - Inch (L)":["2.25"],"Helix Angle - Degree":"30","Web Literature 4":"800388CA","Stainless Steels : 300":"M; Good","Substrate":"HSS-CO","Web Literature 1":"8002024CA-EM,327","End Cut Type":"Ball Nose","Notes":"Other coatings available upon request.","Surface Treatment":"BRIGHT","Units":"Inch","Hardened Steels : 35 HRC":"H; Good","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":"Center Cutting","Cast Iron":"K; Good","Low Carbon Steel : 1010; 1018":"P; Best","List Name":"COBALT HSS DOUBLE END M-DDEB","Medium Carbon Steel : 1035; 1045":"P; Best","Alloy Steels : 4140; 4340":"P; Good","Mill Type":"Double End","Full Description":"High Performance Cobalt HSS End Mills for General Milling Applications","Short Description":"High Performance Cobalt HSS End Mills for General Milling Applications","Die Steels":"P; Good","High Carbon Steel : 1065":"P; Good","Stainless Steels : 17-4PH":"M; Good","View Catalog Page":"Here","Aluminum : 6061; 7075":"N; Good","Stainless Steels : 400":"M; Good","Aluminum : Casting":"N; Good","Weldon Flat":"No","Coolant Thru":"No","Length of Cut - Specification":"REGULAR","Cutting Direction":"RH","Helix Direction":"RH","Cutting Diameter Tolerance - Inch":["+0 / -0.0011","-0.0004 / -0.0015"],"Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"1/16\" - 0.1875\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"2.25\"","Shank-Sizes":"0.1875\"","Friendly Name":"571","CategoryBrand":"OSG"}
621

621

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%20621/End_Mills_-_End_Mill_-_EXOMILL_VC-10_-_List_621_-_Catalog"],"Number of Flutes":"2","Corner Radius - Inch (R)":["0.0625","0.09375","0.125","0.15625","0.1875","0.25","0.3125","0.375","0.5","0.625","0.75"],"Diameter - Inch (D)":["0.125","0.1875","0.25","0.3125","0.375","0.5","0.625","0.75","1","1.25","1.5"],"Cutting Diameter Tolerance - Inch":"+0.0011 / -0","Diameter - Fractional Size (D)":["1/8","3/16","1/4","5/16","3/8","1/2","5/8","3/4","1","1-1/4","1-1/2"],"Product Overview":"2 Flute, Regular Length, Ball End","Length of Cut - Inch (Lc)":["0.375","0.5","0.625","0.75","1","1.375","1.625","2.25","2.5"],"Overall Length - Inch (L)":["2.3125","2.375","2.4375","2.5","3","3.5","3.875","4.75","5"],"Helix Angle - Degree":"30","Shank Diameter - Inch (d)":["0.375","0.5","0.625","0.75","1","1.25"],"Web Literature 4":"800388CA","Web Literature 1":"8002024CA-EM,319|8002024CA-EMT,170","End Cut Type":"Ball Nose","Hardened Steels : 35 HRC":"H; Best","Notes":"Other coatings available upon request.","Surface Treatment":"BRIGHT","Alloy Steels : 4140; 4340":"P; Best","Units":"Inch","Die Steels":"P; Best","Cast Iron":"K; Best","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":"Center Cutting","Stainless Steels : 17-4PH":"M; Best","Stainless Steels : 300":"M; Best","Stainless Steels : 400":"M; Best","High Carbon Steel : 1065":"P; Good","Low Carbon Steel : 1010; 1018":"P; Good","View Catalog Page":"Here","View Speed and Feed Page":"Here","Aluminum : 6061; 7075":"N; Good","Aluminum : Casting":"N; Good","Coolant Thru":"No","Medium Carbon Steel : 1035; 1045":"P; Good","Weldon Flat":"Yes","Mill Type":"Single End","Full Description":"Premium Powdered Metal End Mills for Difficult to Machine Materials","Short Description":"Premium Powdered Metal End Mills for Difficult to Machine Materials","Length of Cut - Specification":["REGULAR","STUB"],"Cutting Direction":"RH","Helix Direction":"RH","Substrate":"VC-10","List Name":"VC-10 CPM-EBD","Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"1/8\" - 1.5\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"2.3125\" - 5\"","Shank-Sizes":"0.375\" - 1.25\"","Friendly Name":"621","CategoryBrand":"EXOMILL"}
644

644

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%20644/End_Mills_-_End_Mill_-_EXOMILL_VC-10_-_List_644_-_Catalog"],"Number of Flutes":["4","6"],"Corner Radius - Inch (R)":["0.1875","0.25","0.3125","0.375","0.4375","0.5","0.625","0.75"],"Cutting Diameter Tolerance - Inch":"+0.0011 / -0","Diameter - Inch (D)":["0.375","0.5","0.625","0.75","0.875","1","1.25","1.5"],"Diameter - Fractional Size (D)":["3/8","1/2","5/8","3/4","7/8","1","1-1/4","1-1/2"],"Length of Cut - Inch (Lc)":["0.75","1.25","1.625","1.875","2"],"Helix Angle - Degree":"30","Overall Length - Inch (L)":["2.5","3.25","3.75","3.875","4.125","4.5"],"Shank Diameter - Inch (d)":["0.375","0.5","0.625","0.75","0.875","1","1.25"],"Web Literature 4":"800388CA","Web Literature 1":"8002024CA-EM,320|8002024CA-EMT,170","End Cut Type":"Ball Nose","Hardened Steels : 35 HRC":"H; Best","Notes":"Other coatings available upon request.","Surface Treatment":"BRIGHT","Alloy Steels : 4140; 4340":"P; Best","Units":"Inch","Die Steels":"P; Best","Cast Iron":"K; Best","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":"Center Cutting","Stainless Steels : 17-4PH":"M; Best","Stainless Steels : 300":"M; Best","Stainless Steels : 400":"M; Best","High Carbon Steel : 1065":"P; Good","Low Carbon Steel : 1010; 1018":"P; Good","View Catalog Page":"Here","View Speed and Feed Page":"Here","Aluminum : 6061; 7075":"N; Good","Aluminum : Casting":"N; Good","Coolant Thru":"No","Medium Carbon Steel : 1035; 1045":"P; Good","Weldon Flat":"Yes","Mill Type":"Single End","Full Description":"Premium Powdered Metal End Mills for Difficult to Machine Materials","Short Description":"Premium Powdered Metal End Mills for Difficult to Machine Materials","Length of Cut - Specification":["REGULAR","STUB"],"Product Overview":"Regular Length, Ball End, Multiple Flute","Cutting Direction":"RH","Helix Direction":"RH","Substrate":"VC-10","List Name":"VC-10 CPM-EBM","Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"3/8\" - 1.5\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"2.5\" - 4.5\"","Shank-Sizes":"0.375\" - 1.25\"","Friendly Name":"644","CategoryBrand":"EXOMILL"}
7010

7010

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%207010/End_Mills_-_End_Mill_-_EXOCARB_Diamond_-_List_7010_-_Catalog"],"Number of Flutes":"2","Coating Thickness (µm)":["12","20"],"Corner Radius - Inch (R)":["0.015625","0.023437","0.03125","0.039062","0.046875","0.0625","0.078125","0.09375","0.125","0.15625","0.1875","0.25"],"Neck Diameter - Inch (d1)":["0.028","0.04","0.056","0.07","0.088"],"Neck Length - Inch (L1)":["0.25","0.5"],"Diameter - Inch (D)":["0.03125","0.046875","0.0625","0.078125","0.09375","0.125","0.15625","0.1875","0.25","0.3125","0.375","0.5"],"Radius Tolerance - Inch":"+0 / -0.0020","Diameter - Fractional Size (D)":["1/32","3/64","1/16","5/64","3/32","1/8","5/32","3/16","1/4","5/16","3/8","1/2"],"Shank Diameter - Inch (d)":["0.125","0.15625","0.1875","0.25","0.3125","0.375","0.5"],"Length of Cut - Inch (Lc)":["0.09375","0.1875","0.25","0.375","0.5","0.5625","0.75","0.8125","0.875","1"],"Overall Length - Inch (L)":["1.75","2","2.5","3"],"Helix Angle - Degree":"30","Web Literature 4":"800388CA","Web Literature 1":"8002024CA-EM,291|8002024CA-EMT,49","End Cut Type":"Ball Nose","Graphite":"Other; Best","Substrate":"Carbide","Units":"Inch","Cutting Type":"Center Cutting","Shank Tolerance":"h6","Surface Treatment":"DIAMOND","List Name":"DIAMOND D-RG-EDBR","Full Description":"High Performance Diamond Coated Ball Mills for Graphite & Non-Ferrous Materials","Short Description":"High Performance Diamond Coated Ball Mills for Graphite & Non-Ferrous Materials","View Catalog Page":"Here","View Speed and Feed Page":"Here","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Weldon Flat":"No","Coolant Thru":"No","Mill Type":"Single End","Length of Cut - Specification":["REGULAR","LONG"],"Product Overview":"Standard Series, Ball End, Regular Length, 2 Flute, OSG Diamond","Cutting Direction":"RH","Helix Direction":"RH","Diameter-Sizes":"1/32\" - 0.5\"","Flute-Sizes":"-","Neck-Sizes":"0.25\" - 0.5\"","Taper-Sizes":"-","Overall-Sizes":"1.75\" - 3\"","Shank-Sizes":"0.125\" - 0.5\"","Friendly Name":"7010","CategoryBrand":"EXOCARB"}
7030

7030

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%207030/End_Mills_-_End_Mill_-_EXOCARB_Diamond_-_List_7030_-_Catalog"],"Coating Thickness (µm)":"12","Number of Flutes":"4","Corner Radius - Inch (R)":["0.015625","0.023437","0.03125","0.039062","0.046875","0.0625","0.09375","0.125","0.15625","0.1875","0.25"],"Neck Diameter - Inch (d1)":["0.028","0.04","0.056","0.07","0.088"],"Neck Length - Inch (L1)":["0.25","0.5"],"Diameter - Inch (D)":["0.03125","0.046875","0.0625","0.078125","0.09375","0.125","0.1875","0.25","0.3125","0.375","0.5"],"Radius Tolerance - Inch":"+0 / -0.0015","Diameter - Fractional Size (D)":["1/32","3/64","1/16","5/64","3/32","1/8","3/16","1/4","5/16","3/8","1/2"],"Shank Diameter - Inch (d)":["0.125","0.1875","0.25","0.3125","0.375","0.5"],"Length of Cut - Inch (Lc)":["0.09375","0.1875","0.25","0.375","0.5","0.75","0.8125","0.875","1"],"Overall Length - Inch (L)":["1.75","2","2.5","3"],"Helix Angle - Degree":"30","Web Literature 4":"800388CA","Web Literature 1":"8002024CA-EM,293|8002024CA-EMT,49","End Cut Type":"Ball Nose","Graphite":"Other; Best","Substrate":"Carbide","Units":"Inch","Cutting Type":"Center Cutting","Shank Tolerance":"h6","Surface Treatment":"DIAMOND","List Name":"DIAMOND D-GF-EBMR","Full Description":"High Performance Diamond Coated Ball Mills for Graphite & Non-Ferrous Materials","Short Description":"High Performance Diamond Coated Ball Mills for Graphite & Non-Ferrous Materials","View Catalog Page":"Here","View Speed and Feed Page":"Here","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Weldon Flat":"No","Coolant Thru":"No","Mill Type":"Single End","Length of Cut - Specification":["REGULAR","LONG"],"Product Overview":"Standard Series, Ball End, Regular Length, 4 Flute, OSG Diamond","Cutting Direction":"RH","Helix Direction":"RH","Diameter-Sizes":"1/32\" - 0.5\"","Flute-Sizes":"-","Neck-Sizes":"0.25\" - 0.5\"","Taper-Sizes":"-","Overall-Sizes":"1.75\" - 3\"","Shank-Sizes":"0.125\" - 0.5\"","Friendly Name":"7030","CategoryBrand":"EXOCARB"}
7031

7031

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%207031/End_Mills_-_End_Mill_-_EXOCARB_Diamond_-_List_7031_-_Catalog"],"Coating Thickness (µm)":"12","Number of Flutes":"4","Overall Length - Inch (L)":["4","5"],"Corner Radius - Inch (R)":["0.09375","0.125","0.1875","0.25"],"Radius Tolerance - Inch":"+0 / -0.0015","Diameter - Inch (D)":["0.1875","0.25","0.375","0.5"],"Shank Diameter - Inch (d)":["0.1875","0.25","0.375","0.5"],"Diameter - Fractional Size (D)":["3/16","1/4","3/8","1/2"],"Length of Cut - Inch (Lc)":["1","1.5","2"],"Helix Angle - Degree":"30","Web Literature 4":"800388CA","Length of Cut - Specification":["EXTRA LONG","LONG"],"Web Literature 1":"8002024CA-EM,294|8002024CA-EMT,49","End Cut Type":"Ball Nose","Graphite":"Other; Best","Substrate":"Carbide","Units":"Inch","Cutting Type":"Center Cutting","Shank Tolerance":"h6","Surface Treatment":"DIAMOND","List Name":"DIAMOND D-GF-EBML","Full Description":"High Performance Diamond Coated Ball Mills for Graphite & Non-Ferrous Materials","Short Description":"High Performance Diamond Coated Ball Mills for Graphite & Non-Ferrous Materials","View Catalog Page":"Here","View Speed and Feed Page":"Here","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Weldon Flat":"No","Coolant Thru":"No","Mill Type":"Single End","Product Overview":"Standard Series, Ball End, Long Length, 4 Flute, OSG Diamond","Cutting Direction":"RH","Helix Direction":"RH","Diameter-Sizes":"3/16\" - 0.5\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"4\" - 5\"","Shank-Sizes":"0.1875\" - 0.5\"","Friendly Name":"7031","CategoryBrand":"EXOCARB"}
7032

7032

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%207032/End_Mills_-_End_Mill_-_EXOCARB_Diamond_-_List_7032_-_Catalog"],"Overall Length - Inch (L)":["3","4","6"],"Coating Thickness (µm)":"12","Number of Flutes":"4","Corner Radius - Inch (R)":["0.03125","0.046875","0.0625","0.09375","0.125","0.15625","0.1875","0.25"],"Neck Diameter - Inch (d1)":["0.059","0.089","0.119","0.178","0.238","0.297","0.356","0.475"],"Neck Length - Inch (L1)":["0.313","0.469","0.625","0.938","0.75","1.125","1.5"],"Diameter - Inch (D)":["0.0625","0.09375","0.125","0.1875","0.25","0.3125","0.375","0.5"],"Radius Tolerance - Inch":"+0 / -0.0015","Diameter - Fractional Size (D)":["1/16","3/32","1/8","3/16","1/4","5/16","3/8","1/2"],"Shank Diameter - Inch (d)":["0.0625","0.09375","0.125","0.1875","0.25","0.3125","0.375","0.5"],"Length of Cut - Inch (Lc)":["0.0625","0.09375","0.125","0.1875","0.25","0.3125","0.375","0.5"],"Helix Angle - Degree":"30","Web Literature 4":"800388CA","Web Literature 1":"8002024CA-EM,295|8002024CA-EMT,49","End Cut Type":"Ball Nose","Graphite":"Other; Best","Substrate":"Carbide","Units":"Inch","Cutting Type":"Center Cutting","Type (feature)":"Long Shank","Shank Tolerance":"h6","Surface Treatment":"DIAMOND","List Name":"DIAMOND LS-BN","Full Description":"High Performance Diamond Coated Ball Mills for Graphite & Non-Ferrous Materials","Short Description":"High Performance Diamond Coated Ball Mills for Graphite & Non-Ferrous Materials","View Catalog Page":"Here","View Speed and Feed Page":"Here","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Weldon Flat":"No","Coolant Thru":"No","Mill Type":"Single End","Product Overview":"Standard Series, Stub Length, 4 Flute, Long Shank, Ball End, OSG Diamond","Cutting Direction":"RH","Length of Cut - Specification":"STUB","Helix Direction":"RH","Diameter-Sizes":"1/16\" - 0.5\"","Flute-Sizes":"-","Neck-Sizes":"0.313\" - 1.5\"","Taper-Sizes":"-","Overall-Sizes":"3\" - 6\"","Shank-Sizes":"0.0625\" - 0.5\"","Friendly Name":"7032","CategoryBrand":"EXOCARB"}
7110

7110

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%207110/End_Mills_-_End_Mill_-_EXOCARB_Diamond_-_List_7110_-_Catalog"],"Number of Flutes":"2","Length of Cut - Metric (Lc)":["4","10","15","20","25","30"],"Coating Thickness (µm)":"12","Neck Diameter - Metric (d1)":["0.95","1.95"],"Corner Radius - Metric (R)":["0.5","1","1.5","2","3","4","5","6"],"Overall Length - Metric (L)":["45","50","55","63","75"],"Shank Diameter - Metric (d)":["3","4","6","8","10","12"],"Radius Tolerance - Metric":"+0 / -0.020","Neck Length - Metric (L1)":["4.95","11.95"],"Diameter - Metric (D)":["1","2","3","4","6","8","10","12"],"Helix Angle - Degree":"30","Web Literature 4":"800388CA","Web Literature 1":"8002024CA-EM,292|8002024CA-EMT,49","End Cut Type":"Ball Nose","Graphite":"Other; Best","Substrate":"Carbide","Cutting Type":"Center Cutting","Length of Cut - Specification":["LONG","REGULAR"],"Shank Tolerance":"h6","Surface Treatment":"DIAMOND","List Name":"DIAMOND D-RG-EBD","Full Description":"High Performance Diamond Coated End Mills for Graphite & Non-Ferrous Materials","Short Description":"High Performance Diamond Coated End Mills for Graphite & Non-Ferrous Materials","View Catalog Page":"Here","View Speed and Feed Page":"Here","Units":"Metric","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Weldon Flat":"No","Coolant Thru":"No","Mill Type":"Single End","Product Overview":"Standard Series, Ball End, Regular Length, 2 Flute, OSG Diamond","Cutting Direction":"RH","Helix Direction":"RH","Diameter-Sizes":"1mm - 12mm","Flute-Sizes":"-","Neck-Sizes":"4.95mm - 11.95mm","Taper-Sizes":"-","Overall-Sizes":"45mm - 75mm","Shank-Sizes":"3mm - 12mm","Friendly Name":"7110","CategoryBrand":"EXOCARB"}
7173

7173

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%207173/End_Mills_-_End_Mill_-_EXOCARB_Diamond_-_List_7173_-_Catalog"],"Number of Flutes":["2","4"],"Coating Thickness (µm)":"12","Corner Radius - Metric (R)":["0.25","0.5","0.75","1","1.5","2","3","4","5","6"],"Neck Diameter - Metric (d1)":["0.48","0.96","1.43","1.9","2.85","3.8","5.7","7.6","9.5","11.4"],"Shank Diameter - Metric (d)":["3","4","6","8","10","12"],"Overall Length - Metric (L)":["50","60","75","100","125","150"],"Radius Tolerance - Metric":"+0 / -0.015","Neck Length - Metric (L1)":["2.5","5","7.5","10","15","20","30","32","40","48"],"Diameter - Metric (D)":["0.5","1","1.5","2","3","4","6","8","10","12"],"Helix Angle - Degree":"30","Length of Cut - Metric (Lc)":["0.5","1","1.5","2","3","4","6","8","10","12"],"Web Literature 4":"800388CA","Web Literature 1":"8002024CA-EM,296|8002024CA-EMT,49","End Cut Type":"Ball Nose","Graphite":"Other; Best","Substrate":"Carbide","Cutting Type":"Center Cutting","Type (feature)":"Long Shank","Shank Tolerance":"h6","Surface Treatment":"DIAMOND","List Name":"DIAMOND LS-BN","Full Description":"High Performance Diamond Coated Ball Mills for Graphite & Non-Ferrous Materials","Short Description":"High Performance Diamond Coated Ball Mills for Graphite & Non-Ferrous Materials","View Catalog Page":"Here","View Speed and Feed Page":"Here","Units":"Metric","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Weldon Flat":"No","Coolant Thru":"No","Mill Type":"Single End","Product Overview":"Standard Series, Stub Length, 4 Flute, Long Shank, Ball End, OSG Diamond","Cutting Direction":"RH","Length of Cut - Specification":"STUB","Helix Direction":"RH","Diameter-Sizes":"0.5mm - 12mm","Flute-Sizes":"-","Neck-Sizes":"2.5mm - 48mm","Taper-Sizes":"-","Overall-Sizes":"50mm - 150mm","Shank-Sizes":"3mm - 12mm","Friendly Name":"7173","CategoryBrand":"EXOCARB"}
7230

7230

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%207230/End_Mills_-_End_Mill_-_EXOCARB_Diamond_-_List_7230_-_Catalog","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%207230/End_Mills_-_End_Mill_-_EXOCARB_Diamond_-_List_7230_-_Face","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%207230/End_Mills_-_End_Mill_-_EXOCARB_Diamond_-_List_7230_-_Extra_2","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%207230/End_Mills_-_End_Mill_-_EXOCARB_Diamond_-_List_7230_-_Extra_1","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%207230/End_Mills_-_End_Mill_-_EXOCARB_Diamond_-_List_7230_-_Side_1","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%207230/End_Mills_-_End_Mill_-_EXOCARB_Diamond_-_List_7230_-_Angle_1"],"Number of Flutes":["2","4"],"Coating Thickness (µm)":"12","Corner Radius - Inch (R)":["0.007812","0.015625","0.03125","0.046875","0.0625","0.09375","0.125"],"Diameter - Inch (D)":["0.015625","0.03125","0.0625","0.09375","0.125","0.1875","0.25"],"Diameter - Fractional Size (D)":["1/64","1/32","1/16","3/32","1/8","3/16","1/4"],"Shank Diameter - Inch (d)":["0.125","0.1875","0.25"],"Length of Cut - Inch (Lc)":["0.046875","0.09375","0.1875","0.375","0.75","1"],"Overall Length - Inch (L)":["1.5","2","2.5"],"Helix Angle - Degree":"30","Web Literature 4":"800388CA","Web Literature 1":"8002024CA-EM,297|8002024CA-EMT,158","End Cut Type":"Ball Nose","Graphite":"Other; Best","Substrate":"Carbide","Units":"Inch","Cutting Type":"Center Cutting","Shank Tolerance":"h6","Surface Treatment":"DIAMOND","List Name":"DIAMOND DIA-EBDSS","Product Overview":"Die Mold Series, Ball End, Regular Length, 2 & 4 Flute, OSG Diamond","Full Description":"High Performance Diamond Coated Ball Mills for Graphite & Non-Ferrous Materials","Short Description":"High Performance Diamond Coated Ball Mills for Graphite & Non-Ferrous Materials","View Catalog Page":"Here","View Speed and Feed Page":"Here","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Weldon Flat":"No","Coolant Thru":"No","Mill Type":"Single End","Length of Cut - Specification":["REGULAR","LONG","EXTRA LONG"],"Cutting Direction":"RH","Cutting Diameter Tolerance - Inch":["+0 / -0.0005","+0 / -0.0008"],"Helix Direction":"RH","Diameter-Sizes":"1/64\" - 0.25\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"1.5\" - 2.5\"","Shank-Sizes":"0.125\" - 0.25\"","Friendly Name":"7230","CategoryBrand":"EXOCARB"}
7231

7231

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%207231/End_Mills_-_End_Mill_-_EXOCARB_Diamond_-_List_7231_-_Catalog"],"Number of Flutes":["2","4"],"Coating Thickness (µm)":"12","Corner Radius - Inch (R)":["0.007812","0.015625","0.023437","0.03125","0.046875","0.0625","0.09375","0.125"],"Neck Diameter - Inch (d1)":["0.012","0.027","0.043","0.058","0.088","0.12","0.183","0.245"],"Neck Length - Inch (L1)":["0.16","0.31","0.47","0.63","0.94","1.5","1.88","2.5"],"Diameter - Inch (D)":["0.015625","0.03125","0.046875","0.0625","0.09375","0.125","0.1875","0.25"],"Diameter - Fractional Size (D)":["1/64","1/32","3/64","1/16","3/32","1/8","3/16","1/4"],"Shank Diameter - Inch (d)":["0.125","0.1875","0.25"],"Length of Cut - Inch (Lc)":["0.046875","0.09375","0.1875","0.375","0.75","1"],"Overall Length - Inch (L)":["1.5","2","3","4"],"Helix Angle - Degree":"30","Web Literature 4":"800388CA","Web Literature 1":"8002024CA-EM,298|8002024CA-EMT,158","End Cut Type":"Ball Nose","Graphite":"Other; Best","Substrate":"Carbide","Units":"Inch","Cutting Type":"Center Cutting","Type (feature)":"Long Neck","Shank Tolerance":"h6","Surface Treatment":"DIAMOND","List Name":"DIAMOND DIA-LN-EBM","Product Overview":"Die Mold Series, Ball End, Regular Length, 2 & 4 Flute, Long Reach, OSG Diamond","Full Description":"High Performance Diamond Coated Ball Mills for Graphite & Non-Ferrous Materials","Short Description":"High Performance Diamond Coated Ball Mills for Graphite & Non-Ferrous Materials","View Catalog Page":"Here","View Speed and Feed Page":"Here","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Weldon Flat":"No","Coolant Thru":"No","Mill Type":"Single End","Length of Cut - Specification":["REGULAR","LONG","EXTRA LONG"],"Cutting Direction":"RH","Cutting Diameter Tolerance - Inch":["+0 / -0.0004","+0 / -0.0007"],"Helix Direction":"RH","Diameter-Sizes":"1/64\" - 0.25\"","Flute-Sizes":"-","Neck-Sizes":"0.16\" - 2.5\"","Taper-Sizes":"-","Overall-Sizes":"1.5\" - 4\"","Shank-Sizes":"0.125\" - 0.25\"","Friendly Name":"7231","CategoryBrand":"EXOCARB"}
7430

7430

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%207430/End_Mills_-_End_Mill_-_EXOCARB_DG-EBML_-_List_7430","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%207430/OSG_-_Website_-_New_Products_-_DG-EBML"],"Number of Flutes":"4","Corner Radius - Inch (R)":["0.015625","0.023437","0.03125","0.046875","0.0625","0.09375","0.125","0.1875","0.25"],"Diameter - Inch (D)":["0.03125","0.046875","0.0625","0.09375","0.125","0.1875","0.25","0.375","0.5"],"Diameter - Fractional Size (D)":["1/32","3/64","1/16","3/32","1/8","3/16","1/4","3/8","1/2"],"Shank Diameter - Inch (d)":["0.125","0.1875","0.25","0.375","0.5"],"Length of Cut - Inch (Lc)":["0.15625","0.234375","0.3125","0.46875","0.625","0.9375","1.25","1.875","2.25"],"Overall Length - Inch (L)":["2.5","3","4","6"],"Helix Angle - Degree":"30","Web Literature 4":"800388CA","Web Literature 1":"8002024CA-EM,299|8002024CA-EMT,159","End Cut Type":"Ball Nose","Graphite":"Other; Best","Web Literature 2":"800369CA","Substrate":"Carbide","Units":"Inch","Product Overview":"Carbide, DG Coating, Inch Sizes","Cutting Type":"Center Cutting","Length of Cut - Specification":"LONG","Full Description":"Long Length of Cut DG Coated 4-Fluted Ball Nose End Mills for Graphite","Short Description":"Long Length of Cut DG Coated 4-Fluted Ball Nose End Mills for Graphite","Benefit 1":"Low resistance to minimize the chipping of the work piece, Stable diamond crystals for milling graphite","Shank Tolerance":"h6","Surface Treatment":"DG","Feature 1":"DG Coating","List Name":"DG-EBML","View Catalog Page":"Here","View Speed and Feed Page":"Here","Weldon Flat":"No","Coolant Thru":"No","Mill Type":"Single End","Cutting Direction":"RH","Radius Tolerance - Inch":["+/- 0.00028","+/- 0.00039"],"Helix Direction":"RH","Diameter-Sizes":"1/32\" - 0.5\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"2.5\" - 6\"","Shank-Sizes":"0.125\" - 0.5\"","Friendly Name":"7430","CategoryBrand":"EXOCARB"}
7431

7431

{"Number of Flutes":"4","Corner Radius - Inch (R)":["0.015625","0.023437","0.03125","0.046875","0.0625","0.09375","0.125"],"Neck Length - Inch (L1)":["0.25","0.5","0.625","1","1.25","1.5","2"],"Diameter - Inch (D)":["0.03125","0.046875","0.0625","0.09375","0.125","0.1875","0.25"],"Diameter - Fractional Size (D)":["1/32","3/64","1/16","3/32","1/8","3/16","1/4"],"Shank Diameter - Inch (d)":["0.125","0.1875","0.25"],"Length of Cut - Inch (Lc)":["0.15625","0.234375","0.3125","0.46875","0.625","0.9375","1.25"],"Overall Length - Inch (L)":["2.5","3","4"],"Helix Angle - Degree":"30","Web Literature 4":"800388CA","Web Literature 1":["8002024CA-EM,300|8002024CA-EMT,159"],"End Cut Type":"Ball Nose","Graphite":"Other; Best","Web Literature 2":"800369CA","Substrate":"Carbide","Units":"Inch","Product Overview":"Carbide, DG Coating, Inch Sizes","Cutting Type":"Center Cutting","Length of Cut - Specification":"LONG","Full Description":"Long Length of Cut DG Coated 4-Fluted Long Neck Ball Nose End Mills for Graphite","Short Description":"Long Length of Cut DG Coated 4-Fluted Long Neck Ball Nose End Mills for Graphite","Type (feature)":"Long Neck","Benefit 1":"Low resistance to minimize the chipping of the work piece, Stable diamond crystals for milling graphite","Shank Tolerance":"h6","Surface Treatment":"DG","Feature 1":"DG Coating","List Name":"DG-LN-EBML","View Catalog Page":"Here","View Speed and Feed Page":"Here","Weldon Flat":"No","Coolant Thru":"No","Mill Type":"Single End","Cutting Direction":"RH","Radius Tolerance - Inch":["+/- 0.00028","+/- 0.00039"],"Helix Direction":"RH","STP Drawing":["Download","Download","Download","Download","Download","Download","Download"],"DXF Drawing":["Download","Download","Download","Download","Download","Download","Download"],"CategoryBrand":"EXOCARB","Diameter-Sizes":"1/32\" - 0.25\"","Flute-Sizes":"-","Neck-Sizes":"0.25\" - 2\"","Taper-Sizes":"-","Overall-Sizes":"2.5\" - 4\"","Shank-Sizes":"0.125\" - 0.25\"","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%207431/End_Mills_-_End_Mill_-_EXOCARB_DG-LN-EBML_-_List_7431","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%207431/OSG_-_Website_-_New_Products_-_DG-LN-EBML"],"Friendly Name":"7431"}
7730

7730

{"Corner Radius - Metric (R)":["1.25","0.5","0.75"],"Overall Length - Metric (L)":["40"],"Shank Diameter - Metric (d)":["4","3"],"Neck Length - Metric (L1)":["17","11","9","15"],"Diameter - Metric (D)":["2.5","1","1.5"],"Length of Cut - Metric (Lc)":["14.75","6","10"],"List Name":["ED-BS","ED-BS RO"],"Cutting Type":["End Cutting","Center Cutting"],"Length of Cut - Specification":["EXTRA LONG"],"End Cut Type":"Ball Nose","Substrate":"Carbide","Surface Treatment":"DIAMOND","Coolant Thru":"No","Units":"Metric","Weldon Flat":"No","Mill Type":"Single End","Helix Direction":"RH","STP Drawing":["Download","Download","Download","Download","Download","Download"],"DXF Drawing":["Download","Download","Download","Download","Download","Download"],"Non-Taper Neck Length - Metric (L2)":["6","10","14.75"],"Glass Ceramics":"Other; Best","Hybrid Ceramic / Composite":"Other; Good","Compatible Machine":"Roland","CategoryBrand":"EXOCARB","Diameter-Sizes":"1mm - 2.5mm","Flute-Sizes":"-","Neck-Sizes":"9mm - 17mm","Taper-Sizes":"-","Overall-Sizes":"40mm","Shank-Sizes":"3mm - 4mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%207730/End_Mills_-_End_Mill_-_ED-BS_-_List_7730_-_1600px","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%207730/ED-EB_-_Type_3_-_002","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%207730/ED-EB_-_Type_3_-_003","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%207730/ED-EB_-_Type_1_-_002","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%207730/ED-EB_-_Group_-_001","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%207730/ED-EB_-_Type_2_-_003","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%207730/ED-BS_RO_Ball"],"Friendly Name":"7730"}
8410

8410

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%208410/End_Mills_-_End_Mill_-_A_Brand_AE-BD-H_-_List_8410_-_Catalog"],"Number of Flutes":"2","Corner Radius - Inch (R)":["0.015625","0.03125","0.046875","0.0625","0.09375","0.125","0.15625","0.1875","0.25"],"Neck Diameter - Inch (d1)":["0.029","0.06","0.092","0.123","0.185","0.246","0.308","0.371","0.496"],"Effective Neck Length by Incline Angle 0.5° - Inch":["0.105","0.172","0.208","0.274","0.305"],"Neck Length - Inch (L1)":["0.512","0.52","0.504","0.508","0.425","0.63","0.756","1"],"Diameter - Inch (D)":["0.03125","0.0625","0.09375","0.125","0.1875","0.25","0.3125","0.375","0.5"],"Effective Neck Length by Incline Angle 1.5° - Inch":["0.112","0.183","0.228","0.297","0.328"],"Effective Neck Length by Incline Angle 1° - Inch":["0.108","0.178","0.218","0.286","0.317"],"Effective Neck Length by Incline Angle 2° - Inch":["0.115","0.189","0.237","0.308","0.339"],"Effective Neck Length by Incline Angle 3° - Inch":["0.124","0.202","0.255","0.329","0.36"],"Type":["1","2"],"Diameter - Fractional Size (D)":["1/32","1/16","3/32","1/8","3/16","1/4","5/16","3/8","1/2"],"Interference Angle - Degree (α)":["12.39","10.39","8.89","7.03","4.1900000000000004"],"Helix Angle - Degree":"25","Full Description":"2-flute high-precision finishing carbide ball end mill for high-hardness steels","Short Description":"2-flute high-precision finishing carbide ball end mill for high-hardness steels","Non-Taper Neck Length - Inch (L2)":["0.094","0.157","0.189","0.252","0.283"],"Length of Cut - Inch (Lc)":["0.024","0.051","0.075","0.098","0.15","0.374","0.469","0.563","0.752"],"Overall Length - Inch (L)":["1.5","2","2.5","3","3.5","4"],"Shank Diameter - Inch (d)":["0.25","0.3125","0.375","0.5"],"Surface Treatment":"DUROREY","Web Literature 4":"800388CA","Web Video 1":"https://youtu.be/_apD06jH1vE","List Name":"AE-BD-H","Web Literature 1":"8002024CA-EM,258|8002024CA-EMT,127","End Cut Type":"Ball Nose","Web Literature 2":"800312CA-V5","Hardened Steels : 45-50 HRC":"H; Best","Hardened Steels : 50-70 HRC":"H; Best","Substrate":"Carbide","Units":"Inch","Hardened Steels : 35 HRC":"H; Good","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":"Center Cutting","Shank Tolerance":"h4","Benefit 1":"Controls chipping while securing cutting quality by making the negative angle weaker near the outer periphery; chipping resistance is enhanced in combination with the weaker helix angle specification","Alloy Steels : 4140; 4340":"P; Good","Die Steels":"P; Good","View Catalog Page":"Here","View Speed and Feed Page":"Here","Weldon Flat":"No","Coolant Thru":"No","Mill Type":"Single End","Cutting Direction":"RH","Length of Cut - Specification":"STUB","Feature 2":"Superior Ball R Precision","Feature 4":"Superior Shank Accuracy","Benefit 4":"Supports h4 tolerance (0/-0.004)","Benefit 3":"Thickening of the center core to prevent deformation of the ball tip and improve control of chipping","Feature 3":"Thickness at Center","Cutting Diameter Tolerance - Inch":"+/- 0.00028","Helix Direction":"RH","Feature 1":"Variable Negative Spiral Gash","Benefit 2":"Secures stable R accuracy across 180°","Diameter-Sizes":"1/32\" - 0.5\"","Flute-Sizes":"-","Neck-Sizes":"0.425\" - 1\"","Taper-Sizes":"-","Overall-Sizes":"1.5\" - 4\"","Shank-Sizes":"0.25\" - 0.5\"","Friendly Name":"8410","CategoryBrand":"A Brand"}
8430

8430

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%208430/End_Mills_-_End_Mill_-_A_Brand_AE-BM-H_-_List_8430_-_Catalog"],"Number of Flutes":"4","Corner Radius - Inch (R)":["0.0625","0.09375","0.125","0.15625","0.1875","0.25"],"Diameter - Inch (D)":["0.125","0.1875","0.25","0.3125","0.375","0.5"],"Diameter - Fractional Size (D)":["1/8","3/16","1/4","5/16","3/8","1/2"],"Shank Diameter - Inch (d)":["0.125","0.1875","0.25","0.3125","0.375","0.5"],"Length of Cut - Inch (Lc)":["0.25","0.375","0.5","0.625","0.75","0.875"],"Overall Length - Inch (L)":["2","2.5","3.5","4","4.375"],"Surface Treatment":"DUROREY","Helix Angle - Degree":"40","Web Literature 4":"800388CA","Full Description":"4-flute high-precision finishing carbide ball end mill for high-hardness steels","Short Description":"4-flute high-precision finishing carbide ball end mill for high-hardness steels","Web Video 1":"https://youtu.be/_apD06jH1vE","Web Video 2":"https://youtu.be/3U8QKmlMY3Q","List Name":"AE-BM-H","Web Literature 1":"8002024CA-EM,264|8002024CA-EMT,133","End Cut Type":"Ball Nose","Web Literature 2":"800312CA-V5","Hardened Steels : 45-50 HRC":"H; Best","Hardened Steels : 50-70 HRC":"H; Best","Substrate":"Carbide","Units":"Inch","Hardened Steels : 35 HRC":"H; Good","Feature 3":"Center 2-Flute Specification","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":"Center Cutting","Shank Tolerance":"h4","Benefit 4":"Controls harmonic vibration commonly generated during milling with multiple flutes to enable high-efficiency milling","Benefit 3":"Controls tear when milling flat areas to improve surface accuracy & secures chip pockets to control the clogging of chips","Alloy Steels : 4140; 4340":"P; Good","Die Steels":"P; Good","View Catalog Page":"Here","View Speed and Feed Page":"Here","Weldon Flat":"No","Coolant Thru":"No","Feature 2":"Sharp Spiral Curve","Mill Type":"Single End","Benefit 2":"Reduces cutting resistance and enables stable performance with extended tool life","Length of Cut - Specification":["REGULAR","STUB"],"Cutting Direction":"RH","Benefit 1":"Suitable for a wide range of processes, from roughing to semi-roughing","Feature 1":"Superior Ball R Precision","Cutting Diameter Tolerance - Inch":["+/- 0.00028","+/- 0.00039"],"Helix Direction":"RH","Feature 4":"Unequal Flute Spacing","Diameter-Sizes":"1/8\" - 0.5\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"2\" - 4.375\"","Shank-Sizes":"0.125\" - 0.5\"","Friendly Name":"8430","CategoryBrand":"A Brand"}
8510

8510

{"Number of Flutes":"2","Neck Diameter - Metric (d1)":["0.95","1.45","1.95","2.85","3.85","4.8","5.8","7.7","9.7","11.7","0.19","0.75","1.35","2.35"],"Corner Radius - Metric (R)":["0.5","0.75","1","1.5","2","2.5","3","4","5","6","0.1","0.4","0.7","1.25"],"Effective Neck Length by Incline Angle 0.5° - Metric":["2.14","3.17","4.19","6.44","8.49","10.63","0.21","1.7","2.95","5.21"],"Effective Neck Length by Incline Angle 1.5° - Metric":["2.26","3.34","4.42","6.79","8.96","11.22","0.24","1.79","3.07","5.43"],"Effective Neck Length by Incline Angle 1° - Metric":["2.2","3.25","4.3","6.61","8.71","10.9","0.23","1.74","3.02","5.31"],"Overall Length - Metric (L)":["50","60","70","80","90","100","110","40"],"Effective Neck Length by Incline Angle 2° - Metric":["2.33","3.44","4.55","7","9.22","11.55","0.25","1.84","3.13","5.54"],"Effective Neck Length by Incline Angle 3° - Metric":["2.48","3.66","4.85","7.45","9.81","0.28","1.93","3.27","5.82"],"Shank Diameter - Metric (d)":["4","6","8","10","12"],"Type":["1","2"],"Interference Angle - Degree (α)":["11.71","10.03","10.64","8.15","5.65","2.92","14.78","12.5","10.5","6.46"],"Helix Angle - Degree":"25","Neck Length - Metric (L1)":["7.7","7.9","12","11.9","8","12.1","12.2","7.31","7.66","7.74","8.08"],"Full Description":"2-flute high-precision finishing carbide ball end mill for high-hardness steels","Short Description":"2-flute high-precision finishing carbide ball end mill for high-hardness steels","Non-Taper Neck Length - Metric (L2)":["2","3","4","6","8","10","0.4","1.6","2.8","5"],"Diameter - Metric (D)":["1","1.5","2","3","4","5","6","8","10","12","0.2","0.8","1.4","2.5"],"Length of Cut - Metric (Lc)":["0.8","1.2","1.6","2.4","3.4","4.2","9","12","15","18","0.16","0.6","1.1","2"],"Surface Treatment":"DUROREY","Web Video 1":["https://youtu.be/_apD06jH1vE"],"List Name":"AE-BD-H","Web Literature 1":"8002024CA-EM,259|8002024CA-EMT,127","End Cut Type":"Ball Nose","Web Literature 2":"800312CA-V5","Substrate":"Carbide","Hardened Steels : 45-50 HRC":"H; Best","Web Literature 4":"800388CA","Hardened Steels : 50-70 HRC":"H; Best","Hardened Steels : 35 HRC":"H; Good","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":"Center Cutting","Shank Tolerance":"h4","Benefit 1":"Controls chipping while securing cutting quality by making the negative angle weaker near the outer periphery; chipping resistance is enhanced in combination with the weaker helix angle specification","Alloy Steels : 4140; 4340":"P; Good","Die Steels":"P; Good","View Catalog Page":"Here","View Speed and Feed Page":"Here","Units":"Metric","Weldon Flat":"No","Coolant Thru":"No","Mill Type":"Single End","Cutting Direction":"RH","Length of Cut - Specification":"STUB","Feature 2":"Superior Ball R Precision","Feature 4":"Superior Shank Accuracy","Benefit 4":"Supports h4 tolerance (0/-0.004)","Helix Direction":"RH","Benefit 3":"Thickening of the center core to prevent deformation of the ball tip and improve control of chipping","Feature 3":"Thickness at Center","Cutting Diameter Tolerance - Metric":"+/- 0.005","Feature 1":"Variable Negative Spiral Gash","Benefit 2":"Secures stable R accuracy across 180°","STP Drawing":["Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download"],"DXF Drawing":["Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download"],"Catalog Page Number(s)":"1054","Aluminum : 6061; 7075":"-","Aluminum : Casting":"-","Aramid Fiber (AFRP)":"-","Bottom Edge Radius - Metric (R2)":"-","Brass, Bronze":"-","Carbon Fiber (CFRP)":"-","Carbon Fiber / Al / Ti / CRES Stack":"-","Carbon Fiber / Aluminum Stack":"-","Carbon Fiber / Titanium Stack":"-","Carbon/Carbon":"-","Cast Iron":"-","Coating Thickness (µm)":"-","Cobalt-Chrome":"-","Compatible Machine":"-","Compression Length - Inch (L2)":"-","Contour Milling":"-","Corner Chamfer - Inch (C)":"-","Corner Chamfer - Metric (C)":"-","Corner Radius - Inch (R)":"-","Cut Incline Angle - Degree (α)":"-","Cut Incline Angle Tolerance - Degree":"-","Cutting Diameter Tolerance - Inch":"-","Deep Side Milling":"-","Diameter - Fractional Size (D)":"-","Diameter - Inch (D)":"-","Diameter at Center of Radius - Metric (dm)":"-","Edge Radius - Metric (R3)":"-","Effective Diameter - Inch (DCF)":"-","Effective Diameter - Metric (DCF)":"-","Effective Draft Angle - Degree (α)":"-","Effective Neck Length by Incline Angle 0.5° - Inch":"-","Effective Neck Length by Incline Angle 0° - Inch":"-","Effective Neck Length by Incline Angle 0° - Metric":"-","Effective Neck Length by Incline Angle 1.5° - Inch":"-","Effective Neck Length by Incline Angle 1° - Inch":"-","Effective Neck Length by Incline Angle 2.5° - Metric":"-","Effective Neck Length by Incline Angle 2° - Inch":"-","Effective Neck Length by Incline Angle 3° - Inch":"-","Effective Radius - Metric (rt)":"-","Form Tolerance - Metric":"-","Glass Ceramics":"-","Glass Fiber (GFRP)":"-","Graphite":"-","Helical Milling":"-","High Carbon Steel : 1065":"-","Honeycomb: AFRP":"-","Honeycomb: AI/AI":"-","Honeycomb: CFRP/AI":"-","Honeycomb: CFRP/Nomex":"-","Honeycomb: GFRP/Nomex":"-","Hybrid Ceramic / Composite":"-","Included Angle - Degree (α)":"-","L/D Ratio":"-","Length of Cut - Inch (Lc)":"-","Length to Center of Radius - Metric (Lm)":"-","Low Carbon Steel : 1010; 1018":"-","Magnesium":"-","Medium Carbon Steel : 1035; 1045":"-","Neck Diameter - Inch (d1)":"-","Neck Diameter Max - Inch (d1 Max)":"-","Neck Diameter Max - Metric (d1 Max)":"-","Neck Diameter Min - Inch (d1 Min)":"-","Neck Diameter Min - Metric (d1 Min)":"-","Neck Draft Angle - Degree (ß)":"-","Neck Length - Inch (L1)":"-","Neck Taper Angle - Degree (α)":"-","Nickel Alloy : Inconel":"-","Non-Taper Neck Length - Inch (L2)":"-","Notes":"-","Overall Length - Inch (L)":"-","PEEK":"-","Peripheral Edge Radius - Metric (R2)":"-","Plunging":"-","Product Overview":"-","Radius Tolerance - Inch":"-","Radius Tolerance - Metric":"-","Ramping":"-","Shank Diameter - Inch (d)":"-","Side Milling":"-","Slotting":"-","Stainless Steels : 17-4PH":"-","Stainless Steels : 300":"-","Stainless Steels : 400":"-","Taper Angle Tolerance - Degree":"-","Taper Diameter - Metric (Ds)":"-","Taper per Side - Degree (α)":"-","Tilt Angle - Degree (α/2)":"-","Tip Radius - Metric (R1)":"-","Titanium":"-","Titanium : 6AL4V (30HRC)":"-","Trochoidal Milling":"-","Type (feature)":"-","Wax/PMMA":"-","Web Literature 3":"-","Web Video 2":"-","Web Video 3":"-","Zirconia":"-","CategoryBrand":"A Brand","Diameter-Sizes":"0.2mm - 12mm","Flute-Sizes":"-","Neck-Sizes":"7.31mm - 12.2mm","Taper-Sizes":"-","Overall-Sizes":"40mm - 110mm","Shank-Sizes":"4mm - 12mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%208510/End_Mills_-_End_Mill_-_A_Brand_AE-BD-H_-_List_8510_-_Catalog"],"Friendly Name":"8510"}
8530

8530

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%208530/End_Mills_-_End_Mill_-_A_Brand_AE-BM-H_-_List_8530_-_Catalog"],"Length of Cut - Metric (Lc)":["2","3","5","4","9","12","15","18"],"Number of Flutes":"4","Neck Diameter - Metric (d1)":["0.95","1.45","2.45","1.95","2.85","3.85","4.85"],"Corner Radius - Metric (R)":["0.5","0.75","1.25","1","1.5","2","2.5","3","4","5","6"],"Effective Neck Length by Incline Angle 0.5° - Metric":["2.13","2.64","5.32","4.19","6.44","8.49","10.54"],"Effective Neck Length by Incline Angle 1.5° - Metric":["2.25","2.78","5.52","4.42","6.79","8.96","11.12"],"Effective Neck Length by Incline Angle 1° - Metric":["2.19","2.71","5.4","4.3","6.61","8.71","10.82"],"Effective Neck Length by Incline Angle 2° - Metric":["2.32","2.85","5.64","4.55","7","9.22","11.45"],"Overall Length - Metric (L)":["50","60","70","80","90"],"Effective Neck Length by Incline Angle 3° - Metric":["2.46","3.02","5.81","4.85","7.45","9.81"],"Shank Diameter - Metric (d)":["4","6","8","10","12"],"Type":["1","2"],"Interference Angle - Degree (α)":["11.85","10.15","9.57","10.64","8.15","5.65","2.95"],"Neck Length - Metric (L1)":["8","12","12.1","12.2"],"Full Description":"4-flute high-precision finishing carbide ball end mill for high-hardness steels","Short Description":"4-flute high-precision finishing carbide ball end mill for high-hardness steels","Non-Taper Neck Length - Metric (L2)":["2","3","5","4","6","8","10"],"Diameter - Metric (D)":["1","1.5","2.5","2","3","4","5","6","8","10","12"],"Surface Treatment":"DUROREY","Helix Angle - Degree":"40","Web Literature 4":"800388CA","Web Video 1":"https://youtu.be/_apD06jH1vE","Web Video 2":"https://youtu.be/3U8QKmlMY3Q","List Name":"AE-BM-H","Web Literature 1":"8002024CA-EM,265|8002024CA-EMT,133","End Cut Type":"Ball Nose","Web Literature 2":"800312CA-V5","Hardened Steels : 45-50 HRC":"H; Best","Hardened Steels : 50-70 HRC":"H; Best","Substrate":"Carbide","Hardened Steels : 35 HRC":"H; Good","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":"Center Cutting","Shank Tolerance":"h4","Benefit 1":"Controls chipping while securing cutting quality by making the negative angle weaker near the outer periphery; chipping resistance is enhanced in combination with the weaker helix angle specification","Alloy Steels : 4140; 4340":"P; Good","Die Steels":"P; Good","View Catalog Page":"Here","View Speed and Feed Page":"Here","Units":"Metric","Weldon Flat":"No","Coolant Thru":"No","Mill Type":"Single End","Length of Cut - Specification":["REGULAR","STUB"],"Cutting Direction":"RH","Feature 2":"Superior Ball R Precision","Feature 4":"Superior Shank Accuracy","Benefit 4":"Supports h4 tolerance (0/-0.004)","Benefit 3":"Thickening of the center core to prevent deformation of the ball tip and improve control of chipping","Feature 3":"Thickness at Center","Cutting Diameter Tolerance - Metric":["+/- 0.005","+/- 0.007","+/- 0.010"],"Helix Direction":"RH","Feature 1":"Variable Negative Spiral Gash","Benefit 2":"Secures stable R accuracy across 180°","Diameter-Sizes":"1mm - 12mm","Flute-Sizes":"-","Neck-Sizes":"8mm - 12.2mm","Taper-Sizes":"-","Overall-Sizes":"50mm - 90mm","Shank-Sizes":"4mm - 12mm","Friendly Name":"8530","CategoryBrand":"A Brand"}
8590

8590

{"Number of Flutes":"2","Corner Radius - Metric (R)":["0.05","0.1","0.15","0.2","0.25","0.3","0.4","0.5","0.6","0.75","0.8","1","1.25","1.5","1.75","2","2.5","3"],"Neck Diameter - Metric (d1)":["0.095","0.19","0.29","0.38","0.48","0.55","0.75","0.95","1.15","1.45","1.55","1.95","2.35","2.85","3.35","3.85","4.85","5.85"],"Effective Neck Length by Incline Angle 0.5° - Metric":["0.3","0.51","0.53","0.79","1.04","1.56","1.82","2.08","0.63","1.3","2.59","3.11","4.14","5.18","0.85","1.06","1.58","2.09","2.61","3.13","3.64","4.16","5.2","6.23","4.68","5.19","8.29","10.36","1.32","2.15","2.67","3.7","4.22","5.25","5.77","6.28","6.8","8.35","10.42","12.49","3.18","4.21","7.31","10.41","2.14","5.24","8.34","9.38","12.48","14.55","16.61","18.68","20.75","22.82","2.55","6.27","20.74","2.65","4.2","10.4","12.47","14.54","16.6","18.67","22.81","31.08","8.33","4.19","6.26","10.39","12.46","14.53","20.73","22.8","25.9","31.07","36.24","41.4","10.58","15.75","20.92","36.42","6.44","8.5","10.57","12.64","14.71","15.74","16.77","20.91","26.08","31.24","15.73","8.49","10.55","12.62","16.76","20.89","26.06","31.23","36.4","41.56","46.73","10.54","15.71","26.04","31.21","41.55"],"Overall Length - Metric (L)":["45","50","55","60","70","65","80","90","100","120"],"Effective Neck Length by Incline Angle 1.5° - Metric":["0.32","0.54","0.56","0.84","1.11","1.67","1.94","2.22","0.66","1.39","1.66","2.77","3.32","4.43","5.54","0.9","1.12","1.68","2.23","2.79","3.34","3.89","4.45","5.56","6.66","2.78","3.33","4.44","5","5.55","8.88","11.09","1.4","2.28","2.84","3.95","4.5","5.61","6.16","6.72","7.27","8.93","11.15","13.37","2.27","3.38","4.49","5.6","6.71","7.81","8.92","11.14","2.26","3.37","4.48","5.59","6.69","7.8","8.91","10.02","11.13","13.34","15.56","17.78","19.99","22.21","24.43","2.69","4.47","6.68","8.9","11.12","22.2","6.67","11.1","13.32","15.53","17.75","19.97","22.18","24.4","33.27","13.31","4.42","6.64","8.86","11.07","13.29","15.51","17.72","22.16","24.37","27.7","33.24","38.78","11.25","16.8","22.34","6.79","9.01","11.23","13.44","15.66","16.77","17.88","22.31","27.85","33.39","16.74","8.96","11.17","13.39","17.82","22.26","27.8","33.34","38.88","16.66"],"Effective Neck Length by Incline Angle 1° - Metric":["0.31","0.53","0.54","0.81","1.08","1.61","1.88","2.15","0.65","1.07","1.34","2.14","2.68","3.21","4.28","5.35","0.88","1.09","1.63","2.16","2.7","3.23","3.76","4.3","5.37","6.44","1.62","2.69","4.83","8.58","10.71","1.36","2.21","2.75","3.82","4.35","5.42","5.96","6.49","7.03","8.63","10.77","12.91","3.28","7.55","8.62","10.76","2.2","3.27","4.34","5.41","6.48","9.69","12.9","15.04","17.18","19.31","21.45","23.59","2.62","4.33","6.47","8.61","10.75","2.72","4.32","6.46","8.6","10.74","12.88","15.02","17.16","19.3","21.44","23.58","32.13","17.15","21.43","10.72","12.86","15","17.14","21.42","23.56","26.77","32.12","37.46","42.81","10.9","16.25","21.6","37.65","6.61","8.75","10.89","13.03","15.17","16.24","17.31","21.58","26.93","32.28","16.22","8.71","10.85","12.99","17.27","21.55","26.9","32.25","37.6","42.94","48.29","10.82","16.17","26.86"],"Effective Neck Length by Incline Angle 2° - Metric":["0.33","0.56","0.58","0.86","1.15","1.73","2.01","2.3","0.68","1.14","1.43","1.72","2.29","2.87","3.44","4.59","5.74","0.93","1.16","2.31","2.88","3.46","4.03","4.61","5.76","6.91","3.45","4.6","5.18","5.75","6.9","9.2","11.5","1.44","2.36","2.93","4.08","4.66","5.81","6.38","6.96","7.53","9.26","11.56","13.86","2.34","3.49","4.64","5.79","6.94","8.09","9.24","11.54","2.33","3.48","4.63","5.78","6.93","8.08","9.23","10.38","11.53","13.83","16.13","18.43","20.73","23.03","25.33","2.77","9.21","11.51","23.01","6.89","9.19","11.49","13.79","16.09","18.39","20.69","22.99","25.29","34.49","9.18","13.78","18.38","22.98","4.55","6.85","9.15","11.45","13.75","16.05","18.35","22.95","25.25","28.7","11.63","17.38","7","9.29","11.59","13.89","16.19","17.34","18.49","23.09","28.84","34.59","17.31","9.22","11.52","13.82","18.42","23.02","28.77"],"Effective Neck Length by Incline Angle 3° - Metric":["0.36","0.6","0.62","0.93","1.24","1.86","2.17","2.48","0.73","1.23","1.54","1.85","2.47","3.09","3.71","4.96","6.2","0.99","3.1","3.72","4.35","4.97","6.21","7.45","4.33","4.95","5.58","7.44","9.93","12.41","1.53","2.53","3.15","4.39","5.01","6.26","6.88","7.5","8.12","9.99","12.47","14.96","2.5","3.75","4.99","6.23","7.48","8.72","9.96","12.45","8.69","9.94","11.18","12.42","14.91","17.4","19.88","22.37","24.86","27.34","2.95","4.94","7.43","9.91","12.4","24.83","3.04","4.91","7.39","9.88","12.36","14.85","17.34","19.82","22.31","9.87","14.84","19.81","4.85","7.33","9.82","12.31","14.79","17.28","19.76","12.48","17.39","18.63","24.85","18.58","9.81","12.3"],"Shank Diameter - Metric (d)":["4","6"],"Type":["1","2"],"Interference Angle - Degree (α)":["14.52","14.16","14.18","13.74","13.33","12.58","12.23","11.9","14.06","13.36","12.96","12.59","11.89","11.27","10.71","9.74","8.93","13.71","13.37","12.57","11.86","11.22","10.65","10.14","9.67","8.85","8.15","13.4","11.85","11.2","10.62","10.09","9.61","9.18","8.78","8.08","6.97","6.12","12.99","11.76","11.1","10.51","9.98","9.5","8.67","8.30","7.96","7.65","6.85","6.01","5.36","11.74","10.42","9.37","8.51","7.8","7.19","6.67","5.83","11.71","10.33","9.23","8.35","7.62","7","6.48","6.03","5.64","4.99","4.47","4.05","3.7","3.41","3.16","11.04","9.08","7.42","6.27","5.43","3.24","10.03","8.81","7.09","5.93","5.09","4.46","3.97","3.58","3.25","2.98","2.75","2.11","5.81","4.35","3.47","2.89","8.25","6.43","5.26","4.45","3.86","3.4","3.04","2.51","2.31","2.06","1.75","1.52","1.34","3.62","2.545","1.97","1.17","6.87","5.22","4.66","4.42","4.2","3.52","2.92","2.5","3.92","5.65","4.73","4.07","3.17","2.6","2.12","1.79","1.55","1.37","1.22","2.95","1.95","0.97","0.73"],"Neck Length - Metric (L1)":["7.6","7.8","7.9","8.1","8.6","8.9","9.1","7.5","8.2","8.4","9.4","9.9","10.9","11.9","8.3","8.8","9.3","9.8","10.3","10.8","11.8","12.8","9.6","10.1","10.6","11.1","11.6","12.6","14.6","16.6","10.4","11.4","12.4","12.9","14.4","16.4","18.4","12.1","13.1","14.1","16.1","7.7","8.7","9.7","10.7","11.7","12.7","13.7","14.7","15.7","17.7","19.7","21.7","23.7","25.7","27.7","11.3","13.3","15.3","25.3","14.8","16.8","18.8","20.8","22.8","24.8","26.8","34.8","20.6","24.6","13.8","15.8","17.8","19.8","23.8","25.8","28.8","33.8","38.8","43.8","18.1","23.1","38.1","13.9","15.9","17.9","19.9","20.9","21.9","25.9","30.9","35.9","12","14","16","20","24","29","34","39","44","49","17.1","27.1","32.1","42.1"],"Full Description":"2-flute high-precision finishing carbide ball end mill for high-hardness steels","Short Description":"2-flute high-precision finishing carbide ball end mill for high-hardness steels","Non-Taper Neck Length - Metric (L2)":["0.3","0.5","0.75","1","1.5","1.75","2","0.6","1.25","2.5","3","4","5","0.8","3.5","6","4.5","8","10","1.2","5.5","6.5","12","7","9","14","16","18","20","22","2.4","30","25","35","40","15","45","50"],"Diameter - Metric (D)":["0.1","0.2","0.3","0.4","0.5","0.6","0.8","1","1.2","1.5","1.6","2","2.5","3","3.5","4","5","6"],"Helix Angle - Degree":"30","Length of Cut - Metric (Lc)":["0.08","0.16","0.24","0.3","0.4","0.5","0.6","0.8","1","1.2","1.3","1.6","2","2.4","2.8","3.2","4","4.8"],"Surface Treatment":"DUROREY","Web Video 1":["https://youtu.be/_apD06jH1vE"],"List Name":"AE-LNBD-H","Web Literature 1":["8002024CA-EM,260|8002024CA-EMT,129","8002024CA-EM,261|8002024CA-EMT,129","8002024CA-EM,262|8002024CA-EMT,129","8002024CA-EM,263|8002024CA-EMT,129"],"End Cut Type":"Ball Nose","Web Literature 2":"800312CA-V5","Substrate":"Carbide","Hardened Steels : 45-50 HRC":"H; Best","Web Literature 4":"800388CA","Hardened Steels : 50-70 HRC":"H; Best","Hardened Steels : 35 HRC":"H; Good","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":"Center Cutting","Type (feature)":"Long Neck","Shank Tolerance":"h4","Alloy Steels : 4140; 4340":"P; Good","Die Steels":"P; Good","View Catalog Page":"Here","View Speed and Feed Page":"Here","Units":"Metric","Weldon Flat":"No","Coolant Thru":"No","Mill Type":"Single End","Cutting Direction":"RH","Benefit 1":"Strong back taper geometry enables milling by point, which prevents chattering and chipping, resulting in improvement of surface accuracy","Length of Cut - Specification":"STUB","Feature 2":"Superior Ball R Precision","Feature 4":"Superior Shank Accuracy","Benefit 4":"Supports h4 tolerance (0/-0.004)","Feature 1":"Teardrop-Shaped Outer Periphery","Helix Direction":"RH","Benefit 3":"Thickening of the center core to prevent deformation of the ball tip and improve control of chipping","Feature 3":"Thickness at Center","Cutting Diameter Tolerance - Metric":["+/- 0.003","+/- 0.005"],"Benefit 2":"Secures stable R accuracy across 180°","STP Drawing":["Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download"],"DXF Drawing":["Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download"],"Catalog Page Number(s)":["1055","1056","1057","1058"],"CategoryBrand":"A Brand","Diameter-Sizes":"0.1mm - 6mm","Flute-Sizes":"-","Neck-Sizes":"7.5mm - 49mm","Taper-Sizes":"-","Overall-Sizes":"45mm - 120mm","Shank-Sizes":"4mm - 6mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%208590/End_Mills_-_End_Mill_-_A_Brand_AE-LNBM-H_-_List_8590_-_Catalog_-_Type_2","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%208590/End_Mills_-_End_Mill_-_A_Brand_AE-LNBM-H_-_List_8590_-_Catalog_-_Type_1"],"Friendly Name":"8590"}
8990

8990

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%208990/End_Mills_-_End_Mill_-_A_Brand_AE-N_-_List_8990_-_AE-LNBD-N_-_Catalog_-_Type_1","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%208990/End_Mills_-_End_Mill_-_A_Brand_AE-N_-_List_8990_-_AE-LNBD-N_-_Catalog_-_Type_2"],"Number of Flutes":"2","Corner Radius - Metric (R)":["0.05","0.075","0.1","0.15","0.2","0.25","0.3","0.4","0.5","0.75","1","1.5","2","3"],"Neck Diameter - Metric (d1)":["0.09","0.135","0.19","0.285","0.38","0.475","0.55","0.75","0.95","1.45","1.95","2.85","3.85","5.85"],"Effective Neck Length by Incline Angle 0.5° - Metric":["0.3","0.53","0.52","1.05","1.06","1.58","0.63","1.57","2.09","1.04","2.08","3.12","4.15","1.03","2.07","3.11","4.14","5.18","1.02","2.06","3.09","4.12","5.16","6.19","2.05","8.25","3.08","5.15","6.18","10.32","12.39","4.18","6.27","12.48","18.68","4.22","6.35","8.47","10.58","12.68","14.78","16.87","21.04","26.24","10.44","12.53","14.62","16.7","20.85","26.03","31.2","10.42","15.64","20.84","26.02","31.18","41.52"],"Overall Length - Metric (L)":["45","55","50","60","65","80","70","90"],"Effective Neck Length by Incline Angle 1.5° - Metric":["0.32","0.59","0.58","1.14","1.15","1.7","0.68","1.13","1.68","2.24","1.11","2.22","3.33","4.44","1.1","2.21","3.32","4.42","5.53","1.07","2.18","3.29","4.4","5.51","6.62","2.17","3.28","4.39","6.61","8.82","2.16","3.27","4.38","5.49","6.59","8.81","11.03","13.24","4.46","6.68","13.33","19.98","4.65","6.96","9.22","11.45","13.67","15.88","18.1","22.53","28.07","11.18","13.4","15.62","17.83","22.27","27.81","33.35","11.13","16.67","22.21","27.75","33.3"],"Effective Neck Length by Incline Angle 1° - Metric":["0.31","0.56","0.55","1.1","1.11","1.65","0.65","1.09","1.63","2.16","1.08","2.15","3.22","4.29","1.07","2.14","3.21","4.28","5.35","1.05","2.12","3.19","4.26","5.33","6.4","2.11","3.18","4.25","6.39","8.53","2.1","3.17","4.24","5.31","6.38","8.52","10.66","12.8","4.33","6.47","12.89","19.31","4.44","6.67","8.87","11.05","13.21","15.36","17.5","21.78","27.13","10.83","12.98","15.12","17.26","21.54","26.89","32.24","10.79","16.16","21.51","26.85","32.2","42.9"],"Effective Neck Length by Incline Angle 2° - Metric":["0.33","0.62","0.6","1.18","0.61","1.19","1.76","0.7","1.17","1.74","2.32","1.15","2.3","3.45","4.6","1.13","2.28","3.43","4.58","5.73","1.1","2.25","3.4","4.55","5.7","6.85","2.24","3.39","4.54","6.84","9.14","2.22","3.37","4.52","5.67","6.82","9.12","11.42","13.72","6.9","13.8","20.7","4.86","7.23","9.54","11.84","14.14","16.44","18.74","23.34","29.09","11.55","13.85","16.15","18.45","23.05","28.8","34.54","11.47","17.22","22.97","28.72"],"Effective Neck Length by Incline Angle 3° - Metric":["0.36","0.67","0.35","0.65","1.27","0.34","0.66","1.28","1.9","0.75","1.25","1.87","2.49","1.23","2.47","3.47","4.95","1.2","2.45","3.69","4.93","6.18","1.17","2.41","3.66","4.9","6.14","7.39","2.39","3.63","4.88","7.36","9.85","2.37","3.61","4.85","6.1","7.34","9.83","12.31","14.8","4.92","7.4","14.86","22.32","5.26","7.75","10.24","12.73","15.21","17.7","12.37","14.85","17.34","19.83","24.8","12.25","18.47"],"Shank Diameter - Metric (d)":["4","6"],"Type":["1","2"],"Interference Angle - Degree (α)":["14.52","14.07","14.55","14.12","13.29","14.59","13.28","12.53","14.02","13.33","12.56","11.87","13.38","10.66","9.68","13.43","10.63","9.6300000000000008","8.7899999999999991","13.5","11.89","10.62","9.59","8.74","8.02","10.53","9.4600000000000009","7.86","6.72","11.85","10.44","9.32","8.42","7.68","6.52","5.67","5.01","8.8000000000000007","7.09","4.46","3.25","7.88","6.2","5.0999999999999996","4.34","3.77","3.33","2.99","2.4700000000000002","2.04","5.95","5.23","4.67","4.21","3.53","2.93","2.5","4.75","3.37","2.61","2.13","1.79","1.37"],"Neck Length - Metric (L1)":["7.6","7.8","7.5","7.7","8.2","7.4","8.1","8.6","7.9","8.4","8.9","8.7","9.7","10.7","9.6","10.6","11.6","7.3","8.3","9.3","10.3","11.3","12.3","8","9.1","10","12","14","13.6","15.6","17.6","8.8","10.8","16.8","22.8","10.2","12.2","14.2","16.2","18.2","20.2","24.2","29.2","15.8","17.8","19.8","21.8","25.8","30.8","35.8","19","24","29","34","44","15","20","30","50"],"Non-Taper Neck Length - Metric (L2)":["0.3","0.5","1","1.5","0.6","2","3","4","5","6","8","10","12","18","14","16","20","25","30","15","40"],"Diameter - Metric (D)":["0.1","0.15","0.2","0.3","0.4","0.5","0.6","0.8","1","1.5","2","3","4","6"],"Helix Angle - Degree":"30","Length of Cut - Metric (Lc)":["0.08","0.12","0.16","0.24","0.3","0.4","0.5","0.6","0.8","1.2","1.6","2.4","3.2","4.8"],"Benefit 2":"Enables High Quality Milling","Benefit 3":"Enables Milling by Point Resulting in Improvement of Surface Accuracy","Full Description":"Advanced Performance Long Neck, Ball Nose End Mills for Non-Ferrous Materials","Short Description":"Advanced Performance Long Neck, Ball Nose End Mills for Non-Ferrous Materials","List Name":"AE-LNBD-N","Web Video 1":"https://youtu.be/BZhAq_MurLI","Web Literature 1":["8002024CA-EM,266|8002024CA-EMT,137","8002024CA-EM,267|8002024CA-EMT,137"],"End Cut Type":"Ball Nose","Web Video 2":"https://youtu.be/UXMQ7bMOGYA","Web Video 3":"https://youtu.be/xWAzG0M9Prs","Substrate":"Carbide","Web Literature 2":"800339CA-V5","Web Literature 4":"800388CA","Product Overview":"Carbide, DLC+IGUSS Coated, 2-Flutes, Stub Length, Long Neck, Ball End, Rib Processing","Cutting Type":"Center Cutting","Type (feature)":"Long Neck","Shank Tolerance":"h4","Surface Treatment":"DLC-IGUSS","View Catalog Page":"Here","View Speed and Feed Page":"Here","Units":"Metric","Weldon Flat":"No","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Mill Type":"Single End","Feature 2":"Precise Ball Specifications","Benefit 1":"Prevents Chattering & Chipping","Cutting Direction":"RH","Feature 3":"Strong Back Taper Geometry","Length of Cut - Specification":"STUB","Feature 1":"Teardrop-Shaped Outer Periphery","Helix Direction":"RH","Radius Tolerance - Metric":["+/- 0.002","+/- 0.003","+/- 0.004"],"Diameter-Sizes":"0.1mm - 6mm","Flute-Sizes":"-","Neck-Sizes":"7.3mm - 50mm","Taper-Sizes":"-","Overall-Sizes":"45mm - 90mm","Shank-Sizes":"4mm - 6mm","Friendly Name":"8990","CategoryBrand":"A Brand"}
9010

9010

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%209010/List_9010"],"Number of Flutes":"2","Corner Radius - Inch (R)":["0.015625","0.03125","0.0625","0.09375","0.125","0.15625","0.1875","0.25"],"Diameter - Inch (D)":["0.03125","0.0625","0.125","0.1875","0.25","0.3125","0.375","0.5"],"Diameter - Fractional Size (D)":["1/32","1/16","1/8","3/16","1/4","5/16","3/8","1/2"],"Length of Cut - Inch (Lc)":["0.046875","0.09375","0.1875","0.28125","0.375","0.46875","0.5625","0.6875"],"Shank Diameter - Inch (d)":["0.25","0.3125","0.375","0.5"],"Overall Length - Inch (L)":["2","2.1875","2.5"],"Helix Angle - Degree":"30","Stainless Steels : 17-4PH":"M; Good","Web Literature 4":"800388CA","Stainless Steels : 300":"M; Good","Web Literature 1":"8002024CA-EM,284|8002024CA-EMT,154","End Cut Type":"Ball Nose","Hardened Steels : 35 HRC":"H; Best","Hardened Steels : 35-45 HRC":"H; Best","Alloy Steels : 4140; 4340":"P; Best","Hardened Steels : 45-50 HRC":"H; Best","Hardened Steels : 50-70 HRC":"H; Best","Units":"Inch","Substrate":"Carbide","Die Steels":"P; Best","Cast Iron":"K; Best","High Carbon Steel : 1065":"P; Best","Cutting Type":"Center Cutting","Low Carbon Steel : 1010; 1018":"P; Best","Medium Carbon Steel : 1035; 1045":"P; Best","Shank Tolerance":"h6","Notes":"Designed for faster speeds and feeds with larger depth of cut.","View Catalog Page":"Here","View Speed and Feed Page":"Here","Coolant Thru":"No","Stainless Steels : 400":"M; Good","List Name":"MAX-BN-EBD","Full Description":"Maximum Performance Carbide Ball Mills for Hardened Steels over 55Rc","Short Description":"Maximum Performance Carbide Ball Mills for Hardened Steels over 55Rc","Weldon Flat":"No","Surface Treatment":"WXS","Mill Type":"Single End","Length of Cut - Specification":"STUB","Cutting Direction":"RH","Product Overview":"Stub Length, 2 Flute, WXS Coating","Radius Tolerance - Inch":["+/- 0.0002","+/- 0.0003"],"Helix Direction":"RH","Nickel Alloy : Inconel":"S; Good","Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"1/32\" - 0.5\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"2\" - 2.5\"","Shank-Sizes":"0.25\" - 0.5\"","Friendly Name":"9010","CategoryBrand":"EXOCARB"}
9011

9011

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%209011/End_Mills_-_End_Mill_-_EXOCARB_MAX_-_List_9011_-_Catalog"],"Overall Length - Inch (L)":["3","3.1875"],"Number of Flutes":"2","Corner Radius - Inch (R)":["0.015625","0.03125","0.0625","0.09375","0.125","0.15625","0.1875"],"Diameter - Inch (D)":["0.03125","0.0625","0.125","0.1875","0.25","0.3125","0.375"],"Diameter - Fractional Size (D)":["1/32","1/16","1/8","3/16","1/4","5/16","3/8"],"Length of Cut - Inch (Lc)":["0.046875","0.09375","0.1875","0.28125","0.375","0.46875","0.5625"],"Shank Diameter - Inch (d)":["0.25","0.3125","0.375"],"Helix Angle - Degree":"30","Stainless Steels : 17-4PH":"M; Good","Web Literature 4":"800388CA","Stainless Steels : 300":"M; Good","Web Literature 1":"8002024CA-EM,286|8002024CA-EMT,154","End Cut Type":"Ball Nose","Hardened Steels : 35 HRC":"H; Best","Hardened Steels : 35-45 HRC":"H; Best","Alloy Steels : 4140; 4340":"P; Best","Hardened Steels : 45-50 HRC":"H; Best","Units":"Inch","Substrate":"Carbide","Die Steels":"P; Best","Cast Iron":"K; Best","High Carbon Steel : 1065":"P; Best","Cutting Type":"Center Cutting","Low Carbon Steel : 1010; 1018":"P; Best","Hardened Steels : 50-70 HRC":"H; Good","Type (feature)":"Long Shank","Medium Carbon Steel : 1035; 1045":"P; Best","Shank Tolerance":"h6","Notes":"Designed for faster speeds and feeds with larger depth of cut.","View Catalog Page":"Here","View Speed and Feed Page":"Here","Coolant Thru":"No","Stainless Steels : 400":"M; Good","List Name":"MAX-BN-LS-EBD","Full Description":"Maximum Performance Carbide Ball Mills for Hardened Steels over 55Rc","Short Description":"Maximum Performance Carbide Ball Mills for Hardened Steels over 55Rc","Weldon Flat":"No","Surface Treatment":"WXS","Mill Type":"Single End","Length of Cut - Specification":"STUB","Cutting Direction":"RH","Product Overview":"Stub Length, 2 Flute, WXS Coating","Radius Tolerance - Inch":"+/- 0.0007","Helix Direction":"RH","Nickel Alloy : Inconel":"S; Good","Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"1/32\" - 0.375\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"3\" - 3.1875\"","Shank-Sizes":"0.25\" - 0.375\"","Friendly Name":"9011","CategoryBrand":"EXOCARB"}
9110

9110

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%209110/End_Mills_-_End_Mill_-_EXOCARB_MAX_-_List_9110_-_Catalog"],"Number of Flutes":"2","Corner Radius - Metric (R)":["0.5","1","1.5","2","3","4","5"],"Overall Length - Metric (L)":["50","55"],"Shank Diameter - Metric (d)":["6","8","10"],"Diameter - Metric (D)":["1","2","3","4","6","8","10"],"Helix Angle - Degree":"30","Length of Cut - Metric (Lc)":["1.5","3","4.5","6","9","12","15"],"Stainless Steels : 17-4PH":"M; Good","Web Literature 4":"800388CA","Stainless Steels : 300":"M; Good","Web Literature 1":"8002024CA-EM,285|8002024CA-EMT,154","End Cut Type":"Ball Nose","Hardened Steels : 35 HRC":"H; Best","Hardened Steels : 35-45 HRC":"H; Best","Alloy Steels : 4140; 4340":"P; Best","Hardened Steels : 45-50 HRC":"H; Best","Hardened Steels : 50-70 HRC":"H; Best","Substrate":"Carbide","Die Steels":"P; Best","Cast Iron":"K; Best","High Carbon Steel : 1065":"P; Best","Cutting Type":"Center Cutting","Low Carbon Steel : 1010; 1018":"P; Best","Product Overview":"Long Length, 2 Flute, WXS Coating","Medium Carbon Steel : 1035; 1045":"P; Best","Shank Tolerance":"h6","Notes":"Designed for faster speeds and feeds with larger depth of cut.","View Catalog Page":"Here","View Speed and Feed Page":"Here","Coolant Thru":"No","Stainless Steels : 400":"M; Good","List Name":"MAX-BN-EBD","Full Description":"Maximum Performance Carbide Ball Mills for Hardened Steels over 55Rc","Short Description":"Maximum Performance Carbide Ball Mills for Hardened Steels over 55Rc","Units":"Metric","Weldon Flat":"No","Surface Treatment":"WXS","Mill Type":"Single End","Length of Cut - Specification":"STUB","Cutting Direction":"RH","Radius Tolerance - Metric":["+/- 0.005","+/- 0.007"],"Helix Direction":"RH","Nickel Alloy : Inconel":"S; Good","Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"1mm - 10mm","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"50mm - 55mm","Shank-Sizes":"6mm - 10mm","Friendly Name":"9110","CategoryBrand":"EXOCARB"}
9111

9111

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%209111/End_Mills_-_End_Mill_-_EXOCARB_MAX_-_List_9111_-_Catalog"],"Number of Flutes":"2","Corner Radius - Metric (R)":["0.5","1","1.5","2","3","4","5"],"Overall Length - Metric (L)":["75","80"],"Shank Diameter - Metric (d)":["6","8","10"],"Diameter - Metric (D)":["1","2","3","4","6","8","10"],"Helix Angle - Degree":"30","Length of Cut - Metric (Lc)":["1.5","3","4.5","6","9","12","15"],"Stainless Steels : 17-4PH":"M; Good","Web Literature 4":"800388CA","Stainless Steels : 300":"M; Good","Web Literature 1":"8002024CA-EM,287|8002024CA-EMT,154","End Cut Type":"Ball Nose","Hardened Steels : 35 HRC":"H; Best","Hardened Steels : 35-45 HRC":"H; Best","Alloy Steels : 4140; 4340":"P; Best","Hardened Steels : 45-50 HRC":"H; Best","Substrate":"Carbide","Die Steels":"P; Best","Cast Iron":"K; Best","High Carbon Steel : 1065":"P; Best","Cutting Type":"Center Cutting","Low Carbon Steel : 1010; 1018":"P; Best","Product Overview":"Long Length, 2 Flute, WXS Coating","Hardened Steels : 50-70 HRC":"H; Good","Type (feature)":"Long Shank","Medium Carbon Steel : 1035; 1045":"P; Best","Shank Tolerance":"h6","Notes":"Designed for faster speeds and feeds with larger depth of cut.","View Catalog Page":"Here","View Speed and Feed Page":"Here","Coolant Thru":"No","Stainless Steels : 400":"M; Good","List Name":"MAX-BN-LS-EBD","Full Description":"Maximum Performance Carbide Ball Mills for Hardened Steels over 55Rc","Short Description":"Maximum Performance Carbide Ball Mills for Hardened Steels over 55Rc","Units":"Metric","Weldon Flat":"No","Surface Treatment":"WXS","Mill Type":"Single End","Length of Cut - Specification":"STUB","Cutting Direction":"RH","Radius Tolerance - Metric":"+/- 0.020","Helix Direction":"RH","Nickel Alloy : Inconel":"S; Good","Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"1mm - 10mm","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"75mm - 80mm","Shank-Sizes":"6mm - 10mm","Friendly Name":"9111","CategoryBrand":"EXOCARB"}
9191

9191

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%209191/End_Mills_-_End_Mill_-_EXOCARB_MAX_-_List_9191_-_Catalog"],"Number of Flutes":"2","Corner Radius - Metric (R)":["0.5","0.55","0.6","0.65","0.7","0.75","0.8","0.85","0.9","0.95","1","1.05","1.1","1.15","1.2","1.25","1.3","1.35","1.4","1.45","1.5","0.2","0.25","0.3","0.35","0.4","0.45"],"Overall Length - Metric (L)":["50","45"],"Shank Diameter - Metric (d)":["6","4"],"Neck Length - Metric (L1)":["2.5","2.8","3","3.3","3.5","3.8","4","4.3","4.5","4.8","5","4.2","4.4","4.6","5.2","5.4","5.6","5.8","6","1.2","1.5","1.8","2.1","2.4","2.7"],"Diameter - Metric (D)":["1","1.1","1.2","1.3","1.4","1.5","1.6","1.7","1.8","1.9","2","2.1","2.2","2.3","2.4","2.5","2.6","2.7","2.8","2.9","3","0.4","0.5","0.6","0.7","0.8","0.9"],"Helix Angle - Degree":"30","Length of Cut - Metric (Lc)":["0.6","0.7","0.8","0.9","1","1.1","1.2","1.3","1.4","1.5","1.6","1.7","1.8","0.3","0.4","0.5"],"Web Literature 4":"800388CA","Feature 3":"5-micron radius tolerance","Benefit 3":"For finishing precision","Benefit 1":"Allows for greater depths of cut","Web Literature 1":"8002024CA-EM,288|8002024CA-EMT,155","End Cut Type":"Ball Nose","Surface Treatment":"BRIGHT","Hardened Steels : 45-50 HRC":"H; Best","Hardened Steels : 50-70 HRC":"H; Best","Substrate":"CBN","Product Overview":"CBN, Finishing, 2-flute","List Name":"CBN-SXB","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":"Center Cutting","Shank Tolerance":"h6","View Catalog Page":"Here","View Speed and Feed Page":"Here","Full Description":"Maximum Performance CBN Ball Mills for Hardened Steels over 55Rc","Short Description":"Maximum Performance CBN Ball Mills for Hardened Steels over 55Rc","Units":"Metric","Weldon Flat":"No","Coolant Thru":"No","Mill Type":"Single End","Feature 1":"Spiral gash","Benefit 2":"Reduces cutting friction","Cutting Direction":"RH","Length of Cut - Specification":"STUB","Radius Tolerance - Metric":"+/- 0.005","Feature 2":"True ground ball with seamless tangency","Helix Direction":"RH","Diameter-Sizes":"0.4mm - 3mm","Flute-Sizes":"-","Neck-Sizes":"1.2mm - 6mm","Taper-Sizes":"-","Overall-Sizes":"45mm - 50mm","Shank-Sizes":"4mm - 6mm","Friendly Name":"9191","CategoryBrand":"EXOCARB"}
9192

9192

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%209192/End_Mills_-_End_Mill_-_EXOCARB_MAX_-_List_9192_-_Catalog"],"Number of Flutes":"2","Corner Radius - Metric (R)":["0.2","0.3","0.5","0.75","1","1.5"],"Overall Length - Metric (L)":["45","50"],"Shank Diameter - Metric (d)":["4","6"],"Neck Length - Metric (L1)":["2","3","4.5","4","5","6","7.5","8","10","12","15"],"Diameter - Metric (D)":["0.4","0.6","1","1.5","2","3"],"Helix Angle - Degree":"30","Length of Cut - Metric (Lc)":["0.3","0.4","0.6","0.9","1.2","1.8"],"Web Literature 4":"800388CA","Feature 3":"5-micron radius tolerance","Benefit 3":"For finishing precision","Benefit 1":"Allows for greater depths of cut","Web Literature 1":"8002024CA-EM,289|8002024CA-EMT,156","End Cut Type":"Ball Nose","Surface Treatment":"BRIGHT","Hardened Steels : 45-50 HRC":"H; Best","Hardened Steels : 50-70 HRC":"H; Best","Substrate":"CBN","Product Overview":"CBN, Finishing, 2-flute, Long Neck","List Name":"CBN-LN-SXB","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":"Center Cutting","Type (feature)":"Long Neck","Shank Tolerance":"h6","View Catalog Page":"Here","View Speed and Feed Page":"Here","Full Description":"Maximum Performance CBN Ball Mills for Hardened Steels over 55Rc","Short Description":"Maximum Performance CBN Ball Mills for Hardened Steels over 55Rc","Units":"Metric","Weldon Flat":"No","Coolant Thru":"No","Mill Type":"Single End","Feature 1":"Spiral gash","Benefit 2":"Reduces cutting friction","Cutting Direction":"RH","Length of Cut - Specification":"STUB","Feature 2":"True ground ball with seamless tangency","Radius Tolerance - Metric":"+/- 0.050","Helix Direction":"RH","Diameter-Sizes":"0.4mm - 3mm","Flute-Sizes":"-","Neck-Sizes":"2mm - 15mm","Taper-Sizes":"-","Overall-Sizes":"45mm - 50mm","Shank-Sizes":"4mm - 6mm","Friendly Name":"9192","CategoryBrand":"EXOCARB"}
9510

9510

{"Number of Flutes":"3","Corner Radius - Metric (R)":["0.5","1","1.5","2","2.5","3","4","5","6","8","10"],"Overall Length - Metric (L)":["60","70","80","90","100","150","110","120","130","140","200"],"Shank Diameter - Metric (d)":["6","8","10","12","16","20"],"Type":["1","2"],"Diameter - Metric (D)":["1","2","3","4","5","6","8","10","12","16","20"],"Length of Cut - Metric (Lc)":["1.5","3","4.5","6","7.5","9","12","15","18","24","30"],"Product Overview":"3-Flute, Ball End, Metric","Stainless Steels : 300":"M; Good","Helix Angle - Degree":"45","Surface Treatment":"EXO","Stainless Steels : 400":"M; Good","Feature 3":["Available in a wide variety of shapes and lengths"],"Hardened Steels : 35 HRC":"H; Best","Web Literature 1":"8002024CA-EM,268|8002024CA-EMT,139","End Cut Type":"Ball Nose","Feature 2":"OSG's WXS nano coating","Web Literature 2":"800304CA","Hardened Steels : 35-45 HRC":"H; Best","Alloy Steels : 4140; 4340":"P; Best","Substrate":"Carbide","Hardened Steels : 45-50 HRC":"H; Best","Web Literature 4":"800388CA","Die Steels":"P; Best","Benefit 1":"Increases edge strength and reduces chip thickness","High Carbon Steel : 1065":"P; Best","Cutting Type":"Center Cutting","Cast Iron":"K; Good","Low Carbon Steel : 1010; 1018":"P; Best","Hardened Steels : 50-70 HRC":"H; Good","Medium Carbon Steel : 1035; 1045":"P; Best","Shank Tolerance":"h6","Type (feature)":"Deep Feed","Stainless Steels : 17-4PH":"M; Good","View Catalog Page":"Here","View Speed and Feed Page":"Here","Units":"Metric","Weldon Flat":"No","Coolant Thru":"No","Benefit 2":"WXS boasts the absolute highest hardness and heat resistance of any OSG coating.","Mill Type":"Single End","Full Description":"Phoenix Deep Feed Ball Nose End Mills","Short Description":"Phoenix Deep Feed Ball Nose End Mills","List Name":"PHX-DBT","Feature 1":"Spiral Gash geometry","Cutting Direction":"RH","Length of Cut - Specification":"STUB","Helix Direction":"RH","Benefit 3":"To reach any mold cavity or core","Radius Tolerance - Metric":"+/- 0.010","STP Drawing":["Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download"],"DXF Drawing":["Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download"],"CategoryBrand":"EXOPRO","Diameter-Sizes":"1mm - 20mm","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"60mm - 200mm","Shank-Sizes":"6mm - 20mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%209510/End_Mills_-_End_Mill_-_EXOPRO_PHX_-_List_9510_-_Catalog","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%209510/End_Mills_-_End_Mill_-_EXOPRO_PHX_-_Group_2","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%209510/End_Mills_-_End_Mill_-_EXOPRO_PHX_-_Group_3","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%209510/End_Mills_-_End_Mill_-_EXOPRO_PHX_-_Group_4","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%209510/End_Mills_-_End_Mill_-_EXOPRO_PHX_-_Group_1"],"Friendly Name":"9510"}
9581

9581

{"Number of Flutes":"3","Corner Radius - Metric (R)":["0.5","0.75","1","1.5","2","2.5","3","4","5","6"],"Neck Diameter Max - Metric (d1 Max)":["1.2","1.1","1.17","1.24","1.31","1.45","1.59","1.77","1.65","2.18","5.43","1.58","1.68","1.79","1.89","2.1","2.41","2.24","2.19","2.36","2.54","2.71","2.89","3.24","3.59","3.88","5.81","5.75","5.67","3.17","3.44","3.61","3.79","4.13","4.48","4.83","5.74","5.7","5.6","4.23","4.73","5.08","5.76","6.48","7.69","7.63","7.5","5.86","6.38","7.08","7.72","7.64","7.56","6.98","7.33","8.72","7.6","9.59","9.49","9.22","9.62","10.62","11.62","9.5","11.49","11.35","11.56","12.16","12.86","13.56","14.26","14.96","11.4","15.38","11.24","15.21","13.36","14.76","15.48","16.85","19.27"],"Neck Diameter Min - Metric (d1 Min)":["0.95","1.45","1.95","2.9","3.9","4.9","5.9","7.9","9.9","11.9"],"Overall Length - Metric (L)":["60","70","80","100","120","130","150","180","160","200","220"],"Shank Diameter - Metric (d)":["6","8","10","12","16","20"],"Effective Draft Angle - Degree (α)":["0.38","0.56000000000000005","0.68","0.75","0.79","0.85","0.88","0.91","1.3","1.39","4.3","0.45","0.65","0.74","0.8","0.86","0.9","0.62","0.76","0.82","0.89","0.92","0.93","1.94","2.85","3.95","0.27","0.69","1.45","1.92","2.81","0.28999999999999998","0.97","1.43","1.47","0.84","0.98","1.91","0.77","1.87","0.99","0.83","0.87","1.48","1.96","0.73"],"Neck Draft Angle - Degree (ß)":["0.5","1","1.5","4.5","2","3","3.8"],"Type":["1","2"],"Neck Length - Metric (L1)":["16","6","8","10","12","20","25","15","30","9","21","40","50","60.3","41.2","60","60.8","46.5","32.1","61.3","80","42.2","80.4","35","70","90.4","61.8","47.5","62.3","90","43.2","81.4","33.6","63.3","120.6","44.2","82.4","64.3","100","120","140","160","45.2","121.6","35.6","92.9","122.6","160.8"],"Diameter - Metric (D)":["1","1.5","2","3","4","5","6","8","10","12"],"Length of Cut - Metric (Lc)":["1.5","2.25","3","4.5","6","7.5","9","12","15","18"],"Product Overview":"3-Flute, Pencil Neck, Ball End, Metric","Stainless Steels : 300":"M; Good","Helix Angle - Degree":"45","Stainless Steels : 400":"M; Good","Feature 3":["Available in a wide variety of shapes and lengths"],"Hardened Steels : 35 HRC":"H; Best","Web Literature 1":["8002024CA-EM,270|8002024CA-EMT,139","8002024CA-EM,271|8002024CA-EMT,139"],"End Cut Type":"Ball Nose","Feature 2":"OSG's WXS nano coating","Web Literature 2":"800304CA","Hardened Steels : 35-45 HRC":"H; Best","Alloy Steels : 4140; 4340":"P; Best","Substrate":"Carbide","Hardened Steels : 45-50 HRC":"H; Best","Web Literature 4":"800388CA","Die Steels":"P; Best","Benefit 1":"Increases edge strength and reduces chip thickness","High Carbon Steel : 1065":"P; Best","Cutting Type":"Center Cutting","Cast Iron":"K; Good","Low Carbon Steel : 1010; 1018":"P; Best","Hardened Steels : 50-70 HRC":"H; Good","Medium Carbon Steel : 1035; 1045":"P; Best","Shank Tolerance":"h6","Stainless Steels : 17-4PH":"M; Good","View Catalog Page":"Here","View Speed and Feed Page":"Here","Units":"Metric","Weldon Flat":"No","Coolant Thru":"No","Surface Treatment":"WXS","Benefit 2":"WXS boasts the absolute highest hardness and heat resistance of any OSG coating.","Type (feature)":"Pencil Neck Deep Feed","Mill Type":"Single End","Full Description":"Phoenix Deep Feed Ball Nose End Mills","Short Description":"Phoenix Deep Feed Ball Nose End Mills","List Name":"PHX-PC-DBT","Feature 1":"Spiral Gash geometry","Cutting Direction":"RH","Length of Cut - Specification":"STUB","Helix Direction":"RH","Benefit 3":"To reach any mold cavity or core","Radius Tolerance - Metric":"+/- 0.010","STP Drawing":["Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download"],"DXF Drawing":["Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download","Download"],"CategoryBrand":"EXOPRO","Diameter-Sizes":"1mm - 12mm","Flute-Sizes":"-","Neck-Sizes":"6mm - 160.8mm","Taper-Sizes":"-","Overall-Sizes":"60mm - 220mm","Shank-Sizes":"6mm - 20mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%209581/List_9581_-_EXOPRO_-_PHX-PC-DBT_-_Catalog_-_Type_2","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%209581/List_9581_-_EXOPRO_-_PHX-PC-DBT_-_Catalog_-_Type_1"],"Friendly Name":"9581"}
9590

9590

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%209590/End_Mills_-_End_Mill_-_EXOPRO_PHX_-_List_9590_-_Catalog","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%209590/End_Mills_-_End_Mill_-_EXOPRO_PHX-LN-DBT_-_List_9590_-_R0.5x6_-_Angle_1","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%209590/End_Mills_-_End_Mill_-_EXOPRO_PHX-LN-DBT_-_List_9590_-_R0.5x6_-_Extra_1","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%209590/End_Mills_-_End_Mill_-_EXOPRO_PHX-LN-DBT_-_List_9590_-_R0.3x1_-_Extra_3","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%209590/End_Mills_-_End_Mill_-_EXOPRO_PHX-LN-DBT_-_List_9590_-_R0.5x6_-_Extra_2","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%209590/End_Mills_-_End_Mill_-_EXOPRO_PHX-LN-DBT_-_List_9590_-_R1.5x16_-_Angle_1","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%209590/End_Mills_-_End_Mill_-_EXOPRO_PHX-LN-DBT_-_List_9590_-_R2x25_-_Face_1","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%209590/End_Mills_-_End_Mill_-_EXOPRO_PHX-LN-DBT_-_List_9590_-_R1.5x16_-_Extra_2","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%209590/End_Mills_-_End_Mill_-_EXOPRO_PHX-LN-DBT_-_List_9590_-_R2x25_-_Extra_1","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%209590/End_Mills_-_End_Mill_-_EXOPRO_PHX_-_Group_2","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%209590/End_Mills_-_End_Mill_-_EXOPRO_PHX_-_Group_3"],"Number of Flutes":"3","Neck Diameter - Metric (d1)":["0.55","0.95","1.45","1.95","2.85","3.85","5.85","0.75"],"Corner Radius - Metric (R)":["0.3","0.5","0.75","1","1.5","2","3","0.4"],"Effective Neck Length by Incline Angle 0.5° - Metric":["1.02","2.06","3.09","4.12","6.19","4.26","6.39","8.5","10.61","12.71","14.81","16.9","6.37","8.49","10.6","12.7","16.89","6.35","8.46","10.57","12.67","14.77","16.86","18.94","21.03","23.13","12.61","16.77","20.92","26.1"],"Effective Neck Length by Incline Angle 1.5° - Metric":["1.08","2.18","3.29","4.4","6.62","4.74","7.03","9.28","11.51","13.71","15.9","18.07","7","9.25","11.48","13.69","18.05","6.94","9.2","11.43","13.64","15.86","18.08","20.29","22.51","24.5","13.57","17.01"],"Effective Neck Length by Incline Angle 1° - Metric":["1.05","2.12","3.19","4.26","6.4","4.5","6.72","8.92","11.09","13.25","15.4","17.54","6.7","8.89","11.07","13.23","17.52","6.65","8.85","11.03","13.19","15.34","17.48","19.62","21.76","23.89","13.1","17.38","21.65"],"Effective Neck Length by Incline Angle 2.5° - Metric":["1.14","2.33","3.53","4.72","7.11","5.18","7.95","9.98","12.37","14.49","16.73","19.53","7.54","9.93","12.32","14.46","18.93","7.46","9.85","12.24","14.63","17.02","18.72","21.02","23.18","25.03","14.08"],"Effective Neck Length by Incline Angle 2° - Metric":["1.11","2.26","3.41","4.56","6.86","4.96","7.32","9.62","11.92","14.12","16.34","18.54","7.28","9.58","11.88","14.09","18.51","7.21","9.52","11.82","16.42"],"Overall Length - Metric (L)":["50","60","70"],"Effective Neck Length by Incline Angle 3° - Metric":["1.17","2.42","3.66","4.9","7.39","5.39","7.88","10.36","12.85","14.83","17.82","20.31","7.82","10.3","12.79","14.8","19.31","7.73","10.21","12.7","15.19","17.67","19.41","21.8"],"Shank Diameter - Metric (d)":["4","6"],"Type":["1","2"],"Neck Length - Metric (L1)":["1","2","3","4","6","8","10","12","14","16","18","20","22","25","30"],"Diameter - Metric (D)":["0.6","1","1.5","2","3","4","6","0.8"],"Length of Cut - Metric (Lc)":["0.45","0.75","1.12","1.5","2.25","3","4.5","0.6"],"Web Literature 4":"800388CA","Product Overview":"3-Flute, Long Neck, Ball End, Metric","Stainless Steels : 300":"M; Good","Helix Angle - Degree":"45","Stainless Steels : 400":"M; Good","Feature 3":"Available in a wide variety of shapes and lengths","Web Literature 1":"8002024CA-EM,269|8002024CA-EMT,139","End Cut Type":"Ball Nose","Hardened Steels : 35 HRC":"H; Best","Feature 2":"OSG's WXS nano coating","Web Literature 2":"800304CA|800291CA","Hardened Steels : 35-45 HRC":"H; Best","Alloy Steels : 4140; 4340":"P; Best","Substrate":"Carbide","Hardened Steels : 45-50 HRC":"H; Best","Die Steels":"P; Best","Benefit 1":"Increases edge strength and reduces chip thickness","High Carbon Steel : 1065":"P; Best","Cutting Type":"Center Cutting","Cast Iron":"K; Good","Low Carbon Steel : 1010; 1018":"P; Best","Hardened Steels : 50-70 HRC":"H; Good","Type (feature)":"Long Neck","Medium Carbon Steel : 1035; 1045":"P; Best","Shank Tolerance":"h6","Stainless Steels : 17-4PH":"M; Good","View Catalog Page":"Here","View Speed and Feed Page":"Here","Units":"Metric","Weldon Flat":"No","Coolant Thru":"No","Surface Treatment":"WXS","Benefit 2":"WXS boasts the absolute highest hardness and heat resistance of any OSG coating.","Mill Type":"Single End","Full Description":"Phoenix Deep Feed Ball Nose End Mills","Short Description":"Phoenix Deep Feed Ball Nose End Mills","List Name":"PHX-LN-DBT","Feature 1":"Spiral Gash geometry","Cutting Direction":"RH","Length of Cut - Specification":"STUB","Helix Direction":"RH","Benefit 3":"To reach any mold cavity or core","Radius Tolerance - Metric":"+/- 0.007","Diameter-Sizes":"0.6mm - 6mm","Flute-Sizes":"-","Neck-Sizes":"1mm - 30mm","Taper-Sizes":"-","Overall-Sizes":"50mm - 70mm","Shank-Sizes":"4mm - 6mm","Friendly Name":"9590","CategoryBrand":"EXOPRO"}
HP413

HP413

{"Number of Flutes":"2","Corner Radius - Inch (R)":["0.015625","0.03125","0.046875","0.0625","0.09375"],"Neck Diameter - Inch (d1)":["0.029","0.06","0.091","0.123","0.183"],"Neck Length - Inch (L1)":["0.15625","0.3125","0.46875","0.625","0.9375"],"Diameter - Inch (D)":["0.03125","0.0625","0.09375","0.125","0.1875"],"Diameter - Fractional Size (D)":["1/32","1/16","3/32","1/8","3/16"],"Product Overview":"2 Flute, Ball End, TiAlN","Length of Cut - Inch (Lc)":["0.03125","0.0625","0.09375","0.125","0.1875"],"Shank Diameter - Inch (d)":["0.25"],"Overall Length - Inch (L)":["2.5","3","4"],"Helix Angle - Degree":"30","End Cut Type":"Ball Nose","List Name":"BN","Units":["Inch","Metric"],"Substrate":"Carbide","Hardened Steels : 35 HRC":"H; Good","Hardened Steels : 35-45 HRC":"H; Good","Cast Iron":"K; Good","Cutting Type":"Center Cutting","Shank Tolerance":"h6","Alloy Steels : 4140; 4340":"P; Good","Die Steels":"P; Good","High Carbon Steel : 1065":"P; Good","Low Carbon Steel : 1010; 1018":"P; Good","Coolant Thru":"No","Weldon Flat":"No","Medium Carbon Steel : 1035; 1045":"P; Good","Full Description":"Performance Carbide TiAlN End Mills for Ferrous and Non-Ferrous Materials","Short Description":"Performance Carbide TiAlN End Mills for Ferrous and Non-Ferrous Materials","Mill Type":"Single End","Length of Cut - Specification":"STUB","Cutting Direction":"RH","Surface Treatment":"TiAlN","Cutting Diameter Tolerance - Inch":"+0 / -0.0015","Helix Direction":"RH","Neck Diameter - Metric (d1)":["0.95","1.15","1.35","1.45","1.55","1.75","1.95","2.4","2.85","3.35","3.85","4.85","5.85"],"Corner Radius - Metric (R)":["0.5","0.6","0.7","0.75","0.8","0.9","1","1.25","1.5","1.75","2","2.5","3"],"Overall Length - Metric (L)":["50"],"Cutting Diameter Tolerance - Metric":"+0 / -0.038","Shank Diameter - Metric (d)":["6"],"Neck Length - Metric (L1)":["2.5","3","3.5","3.8","4","4.5","5","6","7.5","9"],"Diameter - Metric (D)":["1","1.2","1.4","1.5","1.6","1.8","2","2.5","3","3.5","4","5","6"],"Length of Cut - Metric (Lc)":["1","1.2","1.4","1.5","1.6","1.8","2","2.5","3","3.5","4","5","6"],"CategoryBrand":"HY-PRO CARB","Diameter-Sizes":"1/32\" - 6mm","Flute-Sizes":"-","Neck-Sizes":"2.5mm - 0.9375\"","Taper-Sizes":"-","Overall-Sizes":"50mm - 4\"","Shank-Sizes":"6mm - 0.25\"","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%20HP413/End_Mills_-_End_Mill_-_HY-PRO_CARB_-_List_HP413_-_Ball_End_-_Catalog"],"Friendly Name":"HP413"}
HP416

HP416

{"Number of Flutes":"2","Corner Radius - Inch (R)":["0.015625","0.03125","0.046875","0.0625","0.125","0.15625","0.1875"],"Diameter - Inch (D)":["0.03125","0.0625","0.09375","0.125","0.25","0.3125","0.375"],"Diameter - Fractional Size (D)":["1/32","1/16","3/32","1/8","1/4","5/16","3/8"],"Product Overview":"2 Flute, Ball End, TiAlN","Length of Cut - Inch (Lc)":["0.0625","0.125","0.1875","0.25","0.5","0.625","0.75"],"Shank Diameter - Inch (d)":["0.25","0.3125","0.375"],"Overall Length - Inch (L)":["2.5","3","4"],"Helix Angle - Degree":"30","Stainless Steels : 17-4PH":"M; Good","Stainless Steels : 300":"M; Good","End Cut Type":"Ball Nose","List Name":"BN","Units":["Inch","Metric"],"Substrate":"Carbide","Hardened Steels : 35 HRC":"H; Good","Hardened Steels : 35-45 HRC":"H; Good","Cast Iron":"K; Good","Cutting Type":"Center Cutting","Shank Tolerance":"h6","Alloy Steels : 4140; 4340":"P; Good","Die Steels":"P; Good","High Carbon Steel : 1065":"P; Good","Low Carbon Steel : 1010; 1018":"P; Good","Coolant Thru":"No","Stainless Steels : 400":"M; Good","Weldon Flat":"No","Medium Carbon Steel : 1035; 1045":"P; Good","Full Description":"Performance Carbide TiAlN End Mills for Ferrous and Non-Ferrous Materials","Short Description":"Performance Carbide TiAlN End Mills for Ferrous and Non-Ferrous Materials","Mill Type":"Single End","Length of Cut - Specification":["REGULAR","STUB"],"Cutting Direction":"RH","Surface Treatment":"TiAlN","Cutting Diameter Tolerance - Inch":"+0 / -0.0015","Helix Direction":"RH","Nickel Alloy : Inconel":"S; Good","Titanium : 6AL4V (30HRC)":"S; Good","Length of Cut - Metric (Lc)":["2.5","3","3.5","4","4.5","5","6","8","10","12","14","18","22","26","30","34","38","50"],"Corner Radius - Metric (R)":["0.5","0.6","0.7","0.75","0.8","0.9","1","1.25","1.5","1.75","2","2.25","2.5","2.75","3","3.25","3.5","3.75","4.25","4.5","4.75","5","5.5","6","6.5","7","7.5","8","9","10","12.5"],"Overall Length - Metric (L)":["50","60","70","80","90","100","110","140","160","180"],"Shank Diameter - Metric (d)":["4","6","8","10","12","16","20","25"],"Cutting Diameter Tolerance - Metric":"+0 / -0.038","Diameter - Metric (D)":["1","1.2","1.4","1.5","1.6","1.8","2","2.5","3","3.5","4","4.5","5","5.5","6","6.5","7","7.5","8.5","9","9.5","10","11","12","13","14","15","16","18","20","25"],"Aluminum : 6061; 7075":"-","Aluminum : Casting":"-","Aramid Fiber (AFRP)":"-","Benefit 1":"-","Benefit 2":"-","Benefit 3":"-","Benefit 4":"-","Bottom Edge Radius - Metric (R2)":"-","Brass, Bronze":"-","Carbon Fiber (CFRP)":"-","Carbon Fiber / Al / Ti / CRES Stack":"-","Carbon Fiber / Aluminum Stack":"-","Carbon Fiber / Titanium Stack":"-","Carbon/Carbon":"-","Coating Thickness (µm)":"-","Cobalt-Chrome":"-","Compatible Machine":"-","Compression Length - Inch (L2)":"-","Contour Milling":"-","Corner Chamfer - Inch (C)":"-","Corner Chamfer - Metric (C)":"-","Cut Incline Angle - Degree (α)":"-","Cut Incline Angle Tolerance - Degree":"-","Deep Side Milling":"-","Diameter at Center of Radius - Metric (dm)":"-","Edge Radius - Metric (R3)":"-","Effective Diameter - Inch (DCF)":"-","Effective Diameter - Metric (DCF)":"-","Effective Draft Angle - Degree (α)":"-","Effective Neck Length by Incline Angle 0.5° - Inch":"-","Effective Neck Length by Incline Angle 0.5° - Metric":"-","Effective Neck Length by Incline Angle 0° - Inch":"-","Effective Neck Length by Incline Angle 0° - Metric":"-","Effective Neck Length by Incline Angle 1.5° - Inch":"-","Effective Neck Length by Incline Angle 1.5° - Metric":"-","Effective Neck Length by Incline Angle 1° - Inch":"-","Effective Neck Length by Incline Angle 1° - Metric":"-","Effective Neck Length by Incline Angle 2.5° - Metric":"-","Effective Neck Length by Incline Angle 2° - Inch":"-","Effective Neck Length by Incline Angle 2° - Metric":"-","Effective Neck Length by Incline Angle 3° - Inch":"-","Effective Neck Length by Incline Angle 3° - Metric":"-","Effective Radius - Metric (rt)":"-","Feature 1":"-","Feature 2":"-","Feature 3":"-","Feature 4":"-","Form Tolerance - Metric":"-","Glass Ceramics":"-","Glass Fiber (GFRP)":"-","Graphite":"-","Hardened Steels : 45-50 HRC":"-","Hardened Steels : 50-70 HRC":"-","Helical Milling":"-","Honeycomb: AFRP":"-","Honeycomb: AI/AI":"-","Honeycomb: CFRP/AI":"-","Honeycomb: CFRP/Nomex":"-","Honeycomb: GFRP/Nomex":"-","Hybrid Ceramic / Composite":"-","Included Angle - Degree (α)":"-","Interference Angle - Degree (α)":"-","L/D Ratio":"-","Length to Center of Radius - Metric (Lm)":"-","Magnesium":"-","Neck Diameter - Inch (d1)":"-","Neck Diameter - Metric (d1)":"-","Neck Diameter Max - Inch (d1 Max)":"-","Neck Diameter Max - Metric (d1 Max)":"-","Neck Diameter Min - Inch (d1 Min)":"-","Neck Diameter Min - Metric (d1 Min)":"-","Neck Draft Angle - Degree (ß)":"-","Neck Length - Inch (L1)":"-","Neck Length - Metric (L1)":"-","Neck Taper Angle - Degree (α)":"-","Non-Taper Neck Length - Inch (L2)":"-","Non-Taper Neck Length - Metric (L2)":"-","Notes":"-","PEEK":"-","Peripheral Edge Radius - Metric (R2)":"-","Plunging":"-","Radius Tolerance - Inch":"-","Radius Tolerance - Metric":"-","Ramping":"-","Side Milling":"-","Slotting":"-","Taper Angle Tolerance - Degree":"-","Taper Diameter - Metric (Ds)":"-","Taper per Side - Degree (α)":"-","Tilt Angle - Degree (α/2)":"-","Tip Radius - Metric (R1)":"-","Titanium":"-","Trochoidal Milling":"-","Type":"-","Type (feature)":"-","Wax/PMMA":"-","Web Literature 1":"-","Web Literature 2":"-","Web Literature 3":"-","Web Literature 4":"-","Web Video 1":"-","Web Video 2":"-","Web Video 3":"-","Zirconia":"-","View Speed and Feed Page":"-","View Catalog Page":"-","CategoryBrand":"HY-PRO CARB","Diameter-Sizes":"1/32\" - 25mm","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"50mm - 180mm","Shank-Sizes":"4mm - 25mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%20HP416/End_Mills_-_End_Mill_-_HY-PRO_CARB_-_List_HP416_-_Ball_End_-_Catalog"],"Friendly Name":"HP416"}
HP418

HP418

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%20HP418/End_Mills_-_End_Mill_-_HY-PRO_CARB_-_List_HP418_-_Ball_End_-_Catalog"],"Length of Cut - Metric (Lc)":["2.5","5","8","10","12","14","18","22"],"Number of Flutes":"2","Corner Radius - Metric (R)":["0.5","1","1.5","2","2.5","3","4","5","6"],"Neck Diameter Max - Metric (d1 Max)":["3.8","4.8","1.8","4.3","5.5","2.7","5","5.1","6","8","7.5","10","12","16","14.9"],"Overall Length - Metric (L)":["60","80","70","90","110","100","120","130","140","160"],"Cutting Diameter Tolerance - Metric":"+0 / -0.038","Shank Diameter - Metric (d)":["6","8","10","12","16"],"Neck Length - Metric (L1)":["20","40","30","50","28","48","60","33.5","52","35.5","54.5","39.5","58.5","80"],"Product Overview":"2 Flute, Pencil Neck, Ball End, TiAlN","Non-Taper Neck Length - Metric (L2)":["4","7","10.5","12.5","14.5","16.5","20.5","25"],"Diameter - Metric (D)":["1","2","3","4","5","6","8","10","12"],"Helix Angle - Degree":"30","Stainless Steels : 17-4PH":"M; Good","Web Literature 4":"800388CA","Neck Taper Angle - Degree (α)":["5","3","1.5","2"],"Stainless Steels : 300":"M; Good","Web Literature 1":"8002024CA-EM,304|8002024CA-EMT,165","End Cut Type":"Ball Nose","Substrate":"Carbide","Hardened Steels : 35 HRC":"H; Good","Hardened Steels : 35-45 HRC":"H; Good","Cast Iron":"K; Good","Cutting Type":"Center Cutting","Shank Tolerance":"h6","Alloy Steels : 4140; 4340":"P; Good","Die Steels":"P; Good","High Carbon Steel : 1065":"P; Good","Low Carbon Steel : 1010; 1018":"P; Good","View Catalog Page":"Here","View Speed and Feed Page":"Here","Coolant Thru":"No","Stainless Steels : 400":"M; Good","Units":["Metric","Inch"],"Weldon Flat":"No","Medium Carbon Steel : 1035; 1045":"P; Good","List Name":"PC-BN","Type (feature)":"Pencil Neck","Full Description":"Performance Carbide TiAlN End Mills for Ferrous and Non-Ferrous Materials","Short Description":"Performance Carbide TiAlN End Mills for Ferrous and Non-Ferrous Materials","Mill Type":"Single End","Length of Cut - Specification":["REGULAR","STUB"],"Cutting Direction":"RH","Surface Treatment":"TiAlN","Helix Direction":"RH","Nickel Alloy : Inconel":"S; Good","Titanium : 6AL4V (30HRC)":"S; Good","Overall Length - Inch (L)":["3","3.5","4"],"Corner Radius - Inch (R)":["0.046875","0.0625","0.09375","0.125","0.1875"],"Neck Diameter Max - Inch (d1 Max)":["0.24","0.217","0.312","0.375","0.5"],"Diameter - Inch (D)":["0.09375","0.125","0.1875","0.25","0.375"],"Neck Length - Inch (L1)":["1.6","1.9","2.25"],"Non-Taper Neck Length - Inch (L2)":["0.2","0.27","0.39","0.5","0.75"],"Length of Cut - Inch (Lc)":["0.16","0.225","0.312","0.4","0.6"],"Diameter - Fractional Size (D)":["3/32","1/8","3/16","1/4","3/8"],"Shank Diameter - Inch (d)":["0.25","0.3125","0.375","0.5"],"Cutting Diameter Tolerance - Inch":"+0 / -0.0015","Diameter-Sizes":"1mm - 12mm","Flute-Sizes":"-","Neck-Sizes":"20mm - 80mm","Taper-Sizes":"-","Overall-Sizes":"60mm - 160mm","Shank-Sizes":"6mm - 16mm","Friendly Name":"HP418","CategoryBrand":"HY-PRO CARB"}
HP419

HP419

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%20HP419/End_Mills_-_End_Mill_-_HY-PRO_CARB_-_List_HP419_-_Ball_End_-_Catalog"],"Number of Flutes":"2","Neck Diameter - Metric (d1)":["0.45","0.55","0.75","0.95","1.15","1.35","1.45","1.55","1.75","1.95","2.4","2.85","3.35","3.85","4.85","5.85"],"Corner Radius - Metric (R)":["0.25","0.3","0.4","0.5","0.6","0.7","0.75","0.8","0.9","1","1.25","1.5","1.75","2","2.5","3"],"Overall Length - Metric (L)":["60","70","80","90"],"Cutting Diameter Tolerance - Metric":"+0 / -0.038","Shank Diameter - Metric (d)":["6"],"Neck Length - Metric (L1)":["2.5","3","4","5","6","7","7.5","8","9","10","12.5","15","17.5","20","25","30"],"Product Overview":"2 Flute, Long Neck,Ball End, TiAlN","Diameter - Metric (D)":["0.5","0.6","0.8","1","1.2","1.4","1.5","1.6","1.8","2","2.5","3","3.5","4","5","6"],"Helix Angle - Degree":"30","Length of Cut - Metric (Lc)":["0.5","0.6","0.8","1","1.2","1.4","1.5","1.6","1.8","2","2.5","3","3.5","4","5","6"],"Web Literature 4":"800388CA","Web Literature 1":"8002024CA-EM,303|8002024CA-EMT,163","End Cut Type":"Ball Nose","Substrate":"Carbide","Hardened Steels : 35 HRC":"H; Good","Hardened Steels : 35-45 HRC":"H; Good","Cast Iron":"K; Good","List Name":"LN-BN","Cutting Type":"Center Cutting","Type (feature)":"Long Neck","Shank Tolerance":"h6","Alloy Steels : 4140; 4340":"P; Good","Die Steels":"P; Good","High Carbon Steel : 1065":"P; Good","Low Carbon Steel : 1010; 1018":"P; Good","View Catalog Page":"Here","View Speed and Feed Page":"Here","Coolant Thru":"No","Units":["Metric","Inch"],"Weldon Flat":"No","Medium Carbon Steel : 1035; 1045":"P; Good","Full Description":"Performance Carbide TiAlN End Mills for Ferrous and Non-Ferrous Materials","Short Description":"Performance Carbide TiAlN End Mills for Ferrous and Non-Ferrous Materials","Mill Type":"Single End","Length of Cut - Specification":"STUB","Cutting Direction":"RH","Surface Treatment":"TiAlN","Helix Direction":"RH","Corner Radius - Inch (R)":["0.015625","0.03125","0.046875","0.0625","0.09375"],"Neck Diameter - Inch (d1)":["0.029","0.06","0.091","0.123","0.183"],"Neck Length - Inch (L1)":["0.3125","0.625","0.9375","1.25","1.875"],"Diameter - Inch (D)":["0.03125","0.0625","0.09375","0.125","0.1875"],"Diameter - Fractional Size (D)":["1/32","1/16","3/32","1/8","3/16"],"Length of Cut - Inch (Lc)":["0.03125","0.0625","0.09375","0.125","0.1875"],"Shank Diameter - Inch (d)":["0.25"],"Overall Length - Inch (L)":["2.5","3","4"],"Cutting Diameter Tolerance - Inch":"+0 / -0.0015","Diameter-Sizes":"0.5mm - 6mm","Flute-Sizes":"-","Neck-Sizes":"2.5mm - 1.875\"","Taper-Sizes":"-","Overall-Sizes":"60mm - 4\"","Shank-Sizes":"6mm - 0.25\"","Friendly Name":"HP419","CategoryBrand":"HY-PRO CARB"}
HP419L

HP419L

{"Number of Flutes":"2","Neck Diameter - Metric (d1)":["0.55","0.75","0.95","1.15","1.45","1.55","1.75","1.95","2.85"],"Corner Radius - Metric (R)":["0.3","0.4","0.5","0.6","0.75","0.8","0.9","1","1.5"],"Overall Length - Metric (L)":["60","70"],"Cutting Diameter Tolerance - Metric":"+0 / -0.038","Shank Diameter - Metric (d)":["6"],"Product Overview":"2 Flute, Long Neck,Ball End, TiAlN","Neck Length - Metric (L1)":["6","8","10","12","16","30"],"Diameter - Metric (D)":["0.6","0.8","1","1.2","1.5","1.6","1.8","2","3"],"Helix Angle - Degree":"30","Length of Cut - Metric (Lc)":["0.6","0.8","1","1.2","1.5","1.6","1.8","2","3"],"End Cut Type":"Ball Nose","Substrate":["Carbide"],"Hardened Steels : 35 HRC":"H; Good","Hardened Steels : 35-45 HRC":"H; Good","Cast Iron":"K; Good","List Name":"LN-BN","Cutting Type":"Center Cutting","Type (feature)":"Long Neck","Shank Tolerance":"h6","Alloy Steels : 4140; 4340":"P; Good","Die Steels":"P; Good","High Carbon Steel : 1065":"P; Good","Low Carbon Steel : 1010; 1018":"P; Good","Coolant Thru":"No","Units":"Metric","Weldon Flat":"No","Medium Carbon Steel : 1035; 1045":"P; Good","Full Description":"Performance Carbide TiAlN End Mills for Ferrous and Non-Ferrous Materials","Short Description":"Performance Carbide TiAlN End Mills for Ferrous and Non-Ferrous Materials","Mill Type":"Single End","Length of Cut - Specification":"STUB","Cutting Direction":"RH","Surface Treatment":"TiAlN","Helix Direction":"RH","CategoryBrand":"HY-PRO CARB","Diameter-Sizes":"0.6mm - 3mm","Flute-Sizes":"-","Neck-Sizes":"6mm - 30mm","Taper-Sizes":"-","Overall-Sizes":"60mm - 70mm","Shank-Sizes":"6mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%20HP419L/End_Mills_-_End_Mill_-_HY-PRO_CARB_-_List_HP419L_-_Ball_End_-_Catalog"],"Friendly Name":"HP419L"}
HP421BN

HP421BN

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%20HP421BN/End_Mills_-_End_Mill_-_HY-PRO_CARB_-_List_HP421BN_-_Ball_End_-_Catalog","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%20HP421BN/End_Mills_-_End_Mill_-_HY-PRO_CARB_-_List_HP421BN_-_Ball_End_-_Side_1","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%20HP421BN/End_Mills_-_End_Mill_-_HY-PRO_CARB_-_List_HP421BN_-_Ball_End_-_Angle_3"],"Length of Cut - Metric (Lc)":["3","5","7","8","10","12","14","16","19","21","22","25","30","32","35","38"],"Number of Flutes":"2","Corner Radius - Metric (R)":["0.5","0.75","1","1.25","1.5","1.75","2","2.25","2.5","3","3.5","4","4.5","5","5.5","6","7","8","9","10","11","12.5"],"Overall Length - Metric (L)":["39","51","64","70","76","89","102"],"Shank Diameter - Metric (d)":["3","4","5","6","8","10","11","12","14","16","18","20","22","25"],"Cutting Diameter Tolerance - Metric":"+0 / -0.038","Product Overview":"2 Flute, Ball End, TiAlN","Diameter - Metric (D)":["1","1.5","2","2.5","3","3.5","4","4.5","5","6","7","8","9","10","11","12","14","16","18","20","22","25"],"Helix Angle - Degree":"35","Stainless Steels : 17-4PH":"M; Good","Web Literature 4":"800388CA","Stainless Steels : 300":"M; Good","Web Literature 1":"8002024CA-EM,302|8002024CA-EMT,161","End Cut Type":"Ball Nose","List Name":"BN","Substrate":"Carbide","Hardened Steels : 35 HRC":"H; Good","Hardened Steels : 35-45 HRC":"H; Good","Cast Iron":"K; Good","Cutting Type":"Center Cutting","Hardened Steels : 45-50 HRC":"H; Good","Shank Tolerance":"h6","Alloy Steels : 4140; 4340":"P; Good","Die Steels":"P; Good","High Carbon Steel : 1065":"P; Good","Low Carbon Steel : 1010; 1018":"P; Good","View Catalog Page":"Here","View Speed and Feed Page":"Here","Coolant Thru":"No","Stainless Steels : 400":"M; Good","Units":["Metric","Inch"],"Weldon Flat":"No","Medium Carbon Steel : 1035; 1045":"P; Good","Full Description":"Performance Carbide TiAlN End Mills for Ferrous and Non-Ferrous Materials","Short Description":"Performance Carbide TiAlN End Mills for Ferrous and Non-Ferrous Materials","Mill Type":"Single End","Length of Cut - Specification":["REGULAR","LONG","STUB"],"Cutting Direction":"RH","Surface Treatment":"TiAlN","Helix Direction":"RH","Nickel Alloy : Inconel":"S; Good","Titanium : 6AL4V (30HRC)":"S; Good","Corner Radius - Inch (R)":["0.023437","0.03125","0.039062","0.046875","0.5","0.054687","0.0625","0.070312","0.078125","0.085937","0.09375","0.101562","0.109375","0.125","0.140625","0.15625","0.171875","0.1875","0.203125","0.21875","0.25","0.28125","0.3125","0.34375","0.375","0.4375"],"Diameter - Inch (D)":["0.046875","0.0625","0.078125","0.09375","1","0.109375","0.125","0.140625","0.15625","0.171875","0.1875","0.203125","0.21875","0.25","0.28125","0.3125","0.34375","0.375","0.40625","0.4375","0.5","0.5625","0.625","0.6875","0.75","0.875"],"Shank Diameter - Inch (d)":["0.125","1","0.1875","0.25","0.3125","0.375","0.4375","0.5","0.5625","0.625","0.75","0.875"],"Length of Cut - Inch (Lc)":["0.140625","0.1875","0.25","0.3125","1.5","0.375","0.5","0.5625","0.625","0.75","0.8125","0.875","1","1.125","1.25","1.375"],"Overall Length - Inch (L)":["1.5","4","2","2.5","2.75","3","3.5"],"Diameter - Fractional Size (D)":["3/64","1/16","5/64","3/32","1","7/64","1/8","9/64","5/32","11/64","3/16","13/64","7/32","1/4","9/32","5/16","11/32","3/8","13/32","7/16","1/2","9/16","5/8","11/16","3/4","7/8"],"Cutting Diameter Tolerance - Inch":"+0 / -0.0015","Diameter-Sizes":"1mm - 1\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"1.5\" - 102mm","Shank-Sizes":"3mm - 1\"","Friendly Name":"HP421BN","CategoryBrand":"HY-PRO CARB"}
HP441BN

HP441BN

{"Length of Cut - Metric (Lc)":["3","5","7","8","10","12","14","16","19","21","22","25","30","32","35","38"],"Number of Flutes":"4","Corner Radius - Metric (R)":["0.5","0.75","1","1.25","1.5","1.75","2","2.25","2.5","3","3.5","4","4.5","5","5.5","6","7","8","9","10","11","12.5"],"Overall Length - Metric (L)":["39","51","64","70","76","89","102"],"Shank Diameter - Metric (d)":["3","4","5","6","8","10","11","12","14","16","18","20","22","25"],"Cutting Diameter Tolerance - Metric":"+0 / -0.038","Diameter - Metric (D)":["1","1.5","2","2.5","3","3.5","4","4.5","5","6","7","8","9","10","11","12","14","16","18","20","22","25"],"Helix Angle - Degree":"35","Product Overview":"4 Flute, Ball End, TiAlN","Stainless Steels : 17-4PH":"M; Good","Web Literature 4":"800388CA","Stainless Steels : 300":"M; Good","Web Literature 1":"8002024CA-EM,305|8002024CA-EMT,161","End Cut Type":"Ball Nose","List Name":"BN","Substrate":["Carbide"],"Hardened Steels : 35 HRC":"H; Good","Hardened Steels : 35-45 HRC":"H; Good","Cast Iron":"K; Good","Cutting Type":"Center Cutting","Hardened Steels : 45-50 HRC":"H; Good","Shank Tolerance":"h6","Alloy Steels : 4140; 4340":"P; Good","Die Steels":"P; Good","High Carbon Steel : 1065":"P; Good","Low Carbon Steel : 1010; 1018":"P; Good","View Catalog Page":"Here","View Speed and Feed Page":"Here","Coolant Thru":"No","Stainless Steels : 400":"M; Good","Units":["Metric","Inch"],"Weldon Flat":"No","Medium Carbon Steel : 1035; 1045":"P; Good","Full Description":"Performance Carbide TiAlN End Mills for Ferrous and Non-Ferrous Materials","Short Description":"Performance Carbide TiAlN End Mills for Ferrous and Non-Ferrous Materials","Mill Type":"Single End","Length of Cut - Specification":["REGULAR","LONG","STUB"],"Cutting Direction":"RH","Surface Treatment":"TiAlN","Helix Direction":"RH","Nickel Alloy : Inconel":"S; Good","Titanium : 6AL4V (30HRC)":"S; Good","Corner Radius - Inch (R)":["0.023437","0.03125","0.039062","0.046875","0.5","0.054687","0.0625","0.070312","0.078125","0.085937","0.09375","0.101562","0.109375","0.125","0.140625","0.15625","0.171875","0.1875","0.203125","0.21875","0.25","0.28125","0.3125","0.34375","0.375","0.4375"],"Diameter - Inch (D)":["0.046875","0.0625","0.078125","0.09375","1","0.109375","0.125","0.140625","0.15625","0.171875","0.1875","0.203125","0.21875","0.25","0.28125","0.3125","0.34375","0.375","0.40625","0.4375","0.5","0.5625","0.625","0.6875","0.75","0.875"],"Shank Diameter - Inch (d)":["0.125","1","0.1875","0.25","0.3125","0.375","0.4375","0.5","0.5625","0.625","0.75","0.875"],"Length of Cut - Inch (Lc)":["0.140625","0.1875","0.25","0.3125","1.5","0.375","0.5","0.5625","0.625","0.75","0.8125","0.875","1","1.125","1.25","1.375"],"Overall Length - Inch (L)":["1.5","4","2","2.5","2.75","3","3.5"],"Diameter - Fractional Size (D)":["3/64","1/16","5/64","3/32","1","7/64","1/8","9/64","5/32","11/64","3/16","13/64","7/32","1/4","9/32","5/16","11/32","3/8","13/32","7/16","1/2","9/16","5/8","11/16","3/4","7/8"],"Cutting Diameter Tolerance - Inch":"+0 / -0.0015","CategoryBrand":"HY-PRO CARB","Diameter-Sizes":"1mm - 1\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"1.5\" - 102mm","Shank-Sizes":"3mm - 1\"","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%20HP441BN/End_Mills_-_End_Mill_-_HY-PRO_CARB_-_List_HP441BN_-_Ball_End"],"Friendly Name":"HP441BN"}
VG441BN

VG441BN

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FBall%20Nose%2FList%20VG441BN/End_Mills_-_End_Mill_-_HY-PRO_CARB_-_List_VG441BN_-_Variable_Geometry_-_Catalog"],"Overall Length - Inch (L)":["4","5","2","2.25","2.5","3","3.5"],"Number of Flutes":"4","Shank Diameter - Inch (d)":["1","1.25","0.125","0.1875","0.25","0.3125","0.375","0.4375","0.5","0.625","0.75"],"Corner Radius - Inch (R)":["0.5","0.625","0.0625","0.09375","0.125","0.15625","0.1875","0.21875","0.25","0.3125","0.375"],"Diameter - Fractional Size (D)":["1","1-1/4","1/8","3/16","1/4","5/16","3/8","7/16","1/2","5/8","3/4"],"Diameter - Inch (D)":["1","1.25","0.125","0.1875","0.25","0.3125","0.375","0.4375","0.5","0.625","0.75"],"Length of Cut - Inch (Lc)":["1.5","2.25","0.5","0.625","0.75","0.875","1","1.25"],"Helix Angle - Degree":"35","Product Overview":"4-Flute, Ball Nose, Multiple Lengths","Web Literature 4":"800388CA","Web Video 2":"https://youtu.be/4DglWE9T5Vc","Web Video 1":"https://youtu.be/BY9mzA6_rUw","Web Video 3":"https://youtu.be/FA4u_qWSK2k","Web Literature 1":"8002024CA-EM,301|8002024CA-EMT,160","End Cut Type":"Ball Nose","Hardened Steels : 35 HRC":"H; Best","Hardened Steels : 35-45 HRC":"H; Best","Alloy Steels : 4140; 4340":"P; Best","Units":"Inch","Substrate":"Carbide","Die Steels":"P; Best","Cast Iron":"K; Best","High Carbon Steel : 1065":"P; Best","Low Carbon Steel : 1010; 1018":"P; Best","Cutting Type":"Center Cutting","Hardened Steels : 45-50 HRC":"H; Good","Medium Carbon Steel : 1035; 1045":"P; Best","Stainless Steels : 17-4PH":"M; Best","Shank Tolerance":"h6","Stainless Steels : 300":"M; Best","Stainless Steels : 400":"M; Best","Full Description":"High Performance Variable Index End Mills for Difficult to Machine Materials","Short Description":"High Performance Variable Index End Mills for Difficult to Machine Materials","View Catalog Page":"Here","View Speed and Feed Page":"Here","Coolant Thru":"No","Weldon Flat":["Yes","No"],"Mill Type":"Single End","Benefit 2":"Provides additional stability when taking deeper depths of cut for more consistent performance during roughing.","Benefit 3":"Provides stable wear resistance in high temperature milling conditions.","Feature 2":"Raised Land Configuration","Benefit 1":"Reduces vibration from harmonic vibration, increasing life and enabling more aggressive milling.","Length of Cut - Specification":["STUB","LONG","REGULAR"],"Cutting Direction":"RH","Feature 3":"TiAIN Coating","Surface Treatment":"TiAlN","Cutting Diameter Tolerance - Inch":"+0 / -0.0015","Feature 1":"Unequal Flute Spacing","Helix Direction":"RH","Nickel Alloy : Inconel":"S; Best","Titanium : 6AL4V (30HRC)":"S; Best","List Name":"VGX BN","Diameter-Sizes":"1/8\" - 1.25\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"2\" - 5\"","Shank-Sizes":"0.125\" - 1.25\"","Friendly Name":"VG441BN","CategoryBrand":"HY-PRO CARB"}

R1 x 4 EXOCARB AM-EBT

EDP: 3187240

AM-EBT
List 4730

Carbide, Durorey Coating, Ball End, Metric Sizes

Product Overview

Loading...

Check availability

Quantity
1

1

ALTERNATIVE PRODUCT

VIEW PRODUCT

Quick view

R1 x 4 EXOCARB AM-EBT

EDP: 3187240

AM-EBT
List 4730

Carbide, Durorey Coating, Ball End, Metric Sizes

Please login to view pricing

Loading...

Check availability

Quantity
1

1

ALTERNATIVE PRODUCT

VIEW PRODUCT
R1 x 8 EXOCARB AM-EBT

EDP: 3187280

AM-EBT
List 4730

Carbide, Durorey Coating, Ball End, Metric Sizes

Product Overview

Loading...

Check availability

Quantity
1

1

ALTERNATIVE PRODUCT

VIEW PRODUCT

Quick view

R1 x 8 EXOCARB AM-EBT

EDP: 3187280

AM-EBT
List 4730

Carbide, Durorey Coating, Ball End, Metric Sizes

Please login to view pricing

Loading...

Check availability

Quantity
1

1

ALTERNATIVE PRODUCT

VIEW PRODUCT
R1.5 x 6 EXOCARB AM-EBT

EDP: 3187360

AM-EBT
List 4730

Carbide, Durorey Coating, Ball End, Metric Sizes

Product Overview

Loading...

Check availability

Quantity
1

1

ALTERNATIVE PRODUCT

VIEW PRODUCT

Quick view

R1.5 x 6 EXOCARB AM-EBT

EDP: 3187360

AM-EBT
List 4730

Carbide, Durorey Coating, Ball End, Metric Sizes

Please login to view pricing

Loading...

Check availability

Quantity
1

1

ALTERNATIVE PRODUCT

VIEW PRODUCT
R1.5 x 12 EXOCARB AM-EBT

EDP: 3187392

AM-EBT
List 4730

Carbide, Durorey Coating, Ball End, Metric Sizes

Product Overview

Loading...

Check availability

Quantity
1

1

ALTERNATIVE PRODUCT

VIEW PRODUCT

Quick view

R1.5 x 12 EXOCARB AM-EBT

EDP: 3187392

AM-EBT
List 4730

Carbide, Durorey Coating, Ball End, Metric Sizes

Please login to view pricing

Loading...

Check availability

Quantity
1

1

ALTERNATIVE PRODUCT

VIEW PRODUCT
R2 x 8 EXOCARB AM-EBT

EDP: 3187408

AM-EBT
List 4730

Carbide, Durorey Coating, Ball End, Metric Sizes

Product Overview

Loading...

Check availability

Quantity
1

1

ALTERNATIVE PRODUCT

VIEW PRODUCT

Quick view

R2 x 8 EXOCARB AM-EBT

EDP: 3187408

AM-EBT
List 4730

Carbide, Durorey Coating, Ball End, Metric Sizes

Please login to view pricing

Loading...

Check availability

Quantity
1

1

ALTERNATIVE PRODUCT

VIEW PRODUCT
R2 x 16 EXOCARB AM-EBT

EDP: 3187416

AM-EBT
List 4730

Carbide, Durorey Coating, Ball End, Metric Sizes

Product Overview

Loading...

Check availability

Quantity
1

1

ALTERNATIVE PRODUCT

VIEW PRODUCT

Quick view

R2 x 16 EXOCARB AM-EBT

EDP: 3187416

AM-EBT
List 4730

Carbide, Durorey Coating, Ball End, Metric Sizes

Please login to view pricing

Loading...

Check availability

Quantity
1

1

ALTERNATIVE PRODUCT

VIEW PRODUCT
R2.5 x 10 EXOCARB AM-EBT

EDP: 3187510

AM-EBT
List 4730

Carbide, Durorey Coating, Ball End, Metric Sizes

Product Overview

Loading...

Check availability

Quantity
1

1

ALTERNATIVE PRODUCT

VIEW PRODUCT

Quick view

R2.5 x 10 EXOCARB AM-EBT

EDP: 3187510

AM-EBT
List 4730

Carbide, Durorey Coating, Ball End, Metric Sizes

Please login to view pricing

Loading...

Check availability

Quantity
1

1

ALTERNATIVE PRODUCT

VIEW PRODUCT
R2.5 x 20 EXOCARB AM-EBT

EDP: 3187520

AM-EBT
List 4730

Carbide, Durorey Coating, Ball End, Metric Sizes

Product Overview

Loading...

Check availability

Quantity
1

1

ALTERNATIVE PRODUCT

VIEW PRODUCT

Quick view

R2.5 x 20 EXOCARB AM-EBT

EDP: 3187520

AM-EBT
List 4730

Carbide, Durorey Coating, Ball End, Metric Sizes

Please login to view pricing

Loading...

Check availability

Quantity
1

1

ALTERNATIVE PRODUCT

VIEW PRODUCT
R3 x 6 EXOCARB AM-EBT

EDP: 3188060

AM-EBT
List 4730

Carbide, Durorey Coating, Ball End, Metric Sizes

Product Overview

Loading...

Check availability

Quantity
1

1

ALTERNATIVE PRODUCT

VIEW PRODUCT

Quick view

R3 x 6 EXOCARB AM-EBT

EDP: 3188060

AM-EBT
List 4730

Carbide, Durorey Coating, Ball End, Metric Sizes

Please login to view pricing

Loading...

Check availability

Quantity
1

1

ALTERNATIVE PRODUCT

VIEW PRODUCT
R4 x 8 EXOCARB AM-EBT

EDP: 3188080

AM-EBT
List 4730

Carbide, Durorey Coating, Ball End, Metric Sizes

Product Overview

Loading...

Check availability

Quantity
1

1

ALTERNATIVE PRODUCT

VIEW PRODUCT

Quick view

R4 x 8 EXOCARB AM-EBT

EDP: 3188080

AM-EBT
List 4730

Carbide, Durorey Coating, Ball End, Metric Sizes

Please login to view pricing

Loading...

Check availability

Quantity
1

1

ALTERNATIVE PRODUCT

VIEW PRODUCT
R5 x 10 EXOCARB AM-EBT

EDP: 3188100

AM-EBT
List 4730

Carbide, Durorey Coating, Ball End, Metric Sizes

Product Overview

Loading...

Check availability

Quantity
1

1

ALTERNATIVE PRODUCT

VIEW PRODUCT

Quick view

R5 x 10 EXOCARB AM-EBT

EDP: 3188100

AM-EBT
List 4730

Carbide, Durorey Coating, Ball End, Metric Sizes

Please login to view pricing

Loading...

Check availability

Quantity
1

1

ALTERNATIVE PRODUCT

VIEW PRODUCT
R6 x 12 EXOCARB AM-EBT

EDP: 3188120

AM-EBT
List 4730

Carbide, Durorey Coating, Ball End, Metric Sizes

Product Overview

Loading...

Check availability

Quantity
1

1

ALTERNATIVE PRODUCT

VIEW PRODUCT

Quick view

R6 x 12 EXOCARB AM-EBT

EDP: 3188120

AM-EBT
List 4730

Carbide, Durorey Coating, Ball End, Metric Sizes

Please login to view pricing

Loading...

Check availability

Quantity
1

1

ALTERNATIVE PRODUCT

VIEW PRODUCT
R8 x 16 EXOCARB AM-EBT

EDP: 3188160

AM-EBT
List 4730

Carbide, Durorey Coating, Ball End, Metric Sizes

Product Overview

Loading...

Check availability

Quantity
1

1

ALTERNATIVE PRODUCT

VIEW PRODUCT

Quick view

R8 x 16 EXOCARB AM-EBT

EDP: 3188160

AM-EBT
List 4730

Carbide, Durorey Coating, Ball End, Metric Sizes

Please login to view pricing

Loading...

Check availability

Quantity
1

1

ALTERNATIVE PRODUCT

VIEW PRODUCT
R10 x 20 EXOCARB AM-EBT

EDP: 3188200

AM-EBT
List 4730

Carbide, Durorey Coating, Ball End, Metric Sizes

Product Overview

Loading...

Check availability

Quantity
1

1

ALTERNATIVE PRODUCT

VIEW PRODUCT

Quick view

R10 x 20 EXOCARB AM-EBT

EDP: 3188200

AM-EBT
List 4730

Carbide, Durorey Coating, Ball End, Metric Sizes

Please login to view pricing

Loading...

Check availability

Quantity
1

1

ALTERNATIVE PRODUCT

VIEW PRODUCT

Stocked

Discontinued

Globally Stocked

Made to Order

While Supplies Last

BALL NOSE

Preview PDF

AM-EBT

Carbide, Durorey Coating, Ball End, Metric Sizes

Product Overview

AM-EBT

Carbide, Durorey Coating, Ball End, Metric Sizes

AM-EBT

Carbide, Durorey Coating, Ball End, Metric Sizes

Product Overview

AM-EBT

Carbide, Durorey Coating, Ball End, Metric Sizes

AM-EBT

Carbide, Durorey Coating, Ball End, Metric Sizes

Product Overview

AM-EBT

Carbide, Durorey Coating, Ball End, Metric Sizes

AM-EBT

Carbide, Durorey Coating, Ball End, Metric Sizes

Product Overview

AM-EBT

Carbide, Durorey Coating, Ball End, Metric Sizes

AM-EBT

Carbide, Durorey Coating, Ball End, Metric Sizes

Product Overview

AM-EBT

Carbide, Durorey Coating, Ball End, Metric Sizes

AM-EBT

Carbide, Durorey Coating, Ball End, Metric Sizes

Product Overview

AM-EBT

Carbide, Durorey Coating, Ball End, Metric Sizes

AM-EBT

Carbide, Durorey Coating, Ball End, Metric Sizes

Product Overview

AM-EBT

Carbide, Durorey Coating, Ball End, Metric Sizes

AM-EBT

Carbide, Durorey Coating, Ball End, Metric Sizes

Product Overview

AM-EBT

Carbide, Durorey Coating, Ball End, Metric Sizes

AM-EBT

Carbide, Durorey Coating, Ball End, Metric Sizes

Product Overview

AM-EBT

Carbide, Durorey Coating, Ball End, Metric Sizes

AM-EBT

Carbide, Durorey Coating, Ball End, Metric Sizes

Product Overview

AM-EBT

Carbide, Durorey Coating, Ball End, Metric Sizes

AM-EBT

Carbide, Durorey Coating, Ball End, Metric Sizes

Product Overview

AM-EBT

Carbide, Durorey Coating, Ball End, Metric Sizes

AM-EBT

Carbide, Durorey Coating, Ball End, Metric Sizes

Product Overview

AM-EBT

Carbide, Durorey Coating, Ball End, Metric Sizes

AM-EBT

Carbide, Durorey Coating, Ball End, Metric Sizes

Product Overview

AM-EBT

Carbide, Durorey Coating, Ball End, Metric Sizes

AM-EBT

Carbide, Durorey Coating, Ball End, Metric Sizes

Product Overview

AM-EBT

Carbide, Durorey Coating, Ball End, Metric Sizes

Download PDF