MICRO

{"Number of Flutes":"2","Drilling L/D Ratio (xD)":"1","Overall Length - Metric (L)":["38"],"Diameter - Inch (D)":["0.00197"],"Shank Diameter - Metric (d)":["3"],"Flute Length - Metric (FL)":["0.075"],"Diameter - Metric (D)":["0.05"],"Helix Angle - Degree":"30","Benefit 2":"Better chip evacuation and lowers friction during drilling process","Substrate":"Carbide","Web Literature 1":"8002024CA-DR,124|8002024CA-DRT,27","Shank Tolerance":"H3","Brand":"EXOCARB","Web Literature 4":"800387CA","Benefit 3":"For optimal results","Web Literature 2":"80060CA-V2","Hardened Steels : 45-50 HRC":"H; Best","Hardened Steels : 35 HRC":"H; Good","Hardened Steels : 35-45 HRC":"H; Good","Aluminum : 6061; 7075":"N; Good","Stainless Steels : 17-4PH":"M; Best","Stainless Steels : 300":"M; Best","Aluminum : Casting":"N; Good","Stainless Steels : 400":"M; Best","Coolant Thru":"No","Feature 3":"Pilot, 5D, 10D flute lengths","Units":"Metric","Short Description":"Micro Drill from 0.0008 Inch (0.02mm) in Diameter","Product Overview":"Miniature, Under 0.1mm","Cutting Direction":"RH","View Speed and Feed Page":"Here","View Catalog Page":"Here","Helix Direction":"RH","Length of Cut - Specification":"STUB","Cutting Diameter Tolerance - Inch":"+0 / -0.0001","Feature 1":"Tungsten Carbide","List Name":"UVM-LDS","Surface Treatment":"Super Smooth","Feature 2":"Super Smooth coating","Benefit 1":"Superior wear resistance for long tool life","Nickel Alloy : Inconel":"S; Best","Cutting Diameter Tolerance - Metric":"+0 / -0.003","Full Description":"The EXOCARB MAX-MINI UVM-DRL drill is the ultra premium solution for unsurpassed performance processing micro-sized holes as small as 0.02mm and up to 0.08mm in super alloys, stainless steels and hardened steel up to 50 HRC. This drill is made of sub-micrograin carbide available in various flute lengths.","Titanium : 6AL4V (30HRC)":"S; Good","Point Angle - Degree (α)":"120","Shank Diameter - Inch (d)":["0.125"],"Diameter-Sizes":"0.00197\" - 0.05mm","Flute-Sizes":"0.075mm","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"38mm","Shank-Sizes":"3mm - 0.125\"","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FOthers%2FList%205315/Drills_-_Drill_-_EXOCARB_MAX-MINI_-_List_5315_-_Catalog"],"Friendly Name":"5315"}

{"Number of Flutes":"2","Drilling L/D Ratio (xD)":"5","Overall Length - Metric (L)":["38"],"Diameter - Inch (D)":["0.00079","0.00118","0.00157","0.00197","0.00315"],"Shank Diameter - Metric (d)":["3"],"Flute Length - Metric (FL)":["0.12","0.18","0.24","0.3","0.48"],"Diameter - Metric (D)":["0.02","0.03","0.04","0.05","0.08"],"Helix Angle - Degree":"30","Benefit 2":"Better chip evacuation and lowers friction during drilling process","Substrate":"Carbide","Web Literature 1":["8002024CA-DR,124|8002024CA-DRT,27","8002024CA-DR,283|8002024CA-DRT,27"],"Shank Tolerance":"H3","Short Description":"High Performance Carbide Miniature Drills under 0.1mm in size","Brand":"EXOCARB","Web Literature 4":"800387CA","Benefit 3":"For optimal results","Length of Cut - Specification":"JOBBER","Web Literature 2":"80060CA-V2","Hardened Steels : 45-50 HRC":"H; Best","Hardened Steels : 35 HRC":"H; Good","Hardened Steels : 35-45 HRC":"H; Good","Aluminum : 6061; 7075":"N; Good","Stainless Steels : 17-4PH":"M; Best","Stainless Steels : 300":"M; Best","Aluminum : Casting":"N; Good","Stainless Steels : 400":"M; Best","Coolant Thru":"No","Feature 3":"Pilot, 5D, 10D flute lengths","Units":"Metric","Product Overview":"Miniature, Under 0.1mm","Cutting Direction":"RH","View Speed and Feed Page":"Here","View Catalog Page":"Here","Helix Direction":"RH","Cutting Diameter Tolerance - Inch":"+0 / -0.0001","Feature 1":"Tungsten Carbide","List Name":"UVM-DRL-5D","Surface Treatment":"Super Smooth","Feature 2":"Super Smooth coating","Benefit 1":"Superior wear resistance for long tool life","Nickel Alloy : Inconel":"S; Best","Cutting Diameter Tolerance - Metric":"+0 / -0.003","Full Description":"The EXOCARB MAX-MINI UVM-DRL drill is the ultra premium solution for unsurpassed performance processing micro-sized holes as small as 0.02mm and up to 0.08mm in super alloys, stainless steels and hardened steel up to 50 HRC. This drill is made of sub-micrograin carbide available in various flute lengths.","Titanium : 6AL4V (30HRC)":"S; Good","Point Angle - Degree (α)":"120","Shank Diameter - Inch (d)":["0.125"],"Diameter-Sizes":"0.00079\" - 0.08mm","Flute-Sizes":"0.12mm - 0.48mm","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"38mm","Shank-Sizes":"3mm - 0.125\"","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FJobber%20Drills%2FList%205320/Drills_-_Drill_-_EXOCARB_MAX-MINI_-_List_5320_-_Catalog"],"Friendly Name":"5320"}

{"Number of Flutes":"2","Drilling L/D Ratio (xD)":"10","Overall Length - Metric (L)":["38"],"Diameter - Inch (D)":["0.00079","0.00118","0.00157","0.00197","0.00315"],"Shank Diameter - Metric (d)":["3"],"Flute Length - Metric (FL)":["0.22","0.33","0.44","0.55","0.88"],"Diameter - Metric (D)":["0.02","0.03","0.04","0.05","0.08"],"Helix Angle - Degree":"30","Benefit 2":"Better chip evacuation and lowers friction during drilling process","Substrate":"Carbide","Shank Tolerance":"H3","Web Literature 1":["8002024CA-DR,283|8002024CA-DRT,27","8002024CA-DR,124|8002024CA-DRT,27"],"Brand":"EXOCARB","Web Literature 4":"800387CA","Benefit 3":"For optimal results","Web Literature 2":"80060CA-V2","Hardened Steels : 45-50 HRC":"H; Best","Hardened Steels : 35 HRC":"H; Good","Hardened Steels : 35-45 HRC":"H; Good","Aluminum : 6061; 7075":"N; Good","Stainless Steels : 17-4PH":"M; Best","Stainless Steels : 300":"M; Best","Aluminum : Casting":"N; Good","Stainless Steels : 400":"M; Best","Coolant Thru":"No","Feature 3":"Pilot, 5D, 10D flute lengths","Units":"Metric","Short Description":"Micro Drill from 0.0008 Inch (0.02mm) in Diameter","Product Overview":"Miniature, Under 0.1mm","Cutting Direction":"RH","View Speed and Feed Page":"Here","View Catalog Page":"Here","Helix Direction":"RH","Cutting Diameter Tolerance - Inch":"+0 / -0.0001","Feature 1":"Tungsten Carbide","List Name":"UVM-DRL-10D","Surface Treatment":"Super Smooth","Feature 2":"Super Smooth coating","Benefit 1":"Superior wear resistance for long tool life","Length of Cut - Specification":"TAPER","Nickel Alloy : Inconel":"S; Best","Cutting Diameter Tolerance - Metric":"+0 / -0.003","Full Description":"The EXOCARB MAX-MINI UVM-DRL drill is the ultra premium solution for unsurpassed performance processing micro-sized holes as small as 0.02mm and up to 0.08mm in super alloys, stainless steels and hardened steel up to 50 HRC. This drill is made of sub-micrograin carbide available in various flute lengths.","Titanium : 6AL4V (30HRC)":"S; Good","Point Angle - Degree (α)":"120","Shank Diameter - Inch (d)":["0.125"],"Diameter-Sizes":"0.00079\" - 0.08mm","Flute-Sizes":"0.22mm - 0.88mm","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"38mm","Shank-Sizes":"3mm - 0.125\"","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FTaper%20Drills%2FList%205325/Drills_-_Drill_-_EXOCARB_MAX-MINI_-_List_5325_-_Catalog"],"Friendly Name":"5325"}

{"Number of Flutes":"2","Drilling L/D Ratio (xD)":["5","4","3"],"Overall Length - Metric (L)":["38","42","50","56","64"],"Diameter - Inch (D)":["0.00787","0.00827","0.00866","0.00906","0.00945","0.00984","0.01024","0.01063","0.01102","0.01142","0.01181","0.0122","0.0126","0.01299","0.01339","0.01378","0.01417","0.01457","0.01496","0.01535","0.01575","0.01614","0.01654","0.01693","0.01732","0.01772","0.01811","0.0185","0.0189","0.01929","0.01969","0.02008","0.02047","0.02087","0.02126","0.02165","0.02205","0.02244","0.02283","0.02323","0.02362","0.02402","0.02441","0.0248","0.0252","0.02559","0.02598","0.02638","0.02677","0.02717","0.02756","0.02795","0.02835","0.02874","0.02913","0.02953","0.02992","0.03031","0.03071","0.0311","0.0315","0.03189","0.03228","0.03268","0.03307","0.03346","0.03386","0.03425","0.03465","0.03504","0.03543","0.03583","0.03622","0.03661","0.03701","0.0374","0.0378","0.03819","0.03858","0.03898","0.03937","0.03976","0.04016","0.04055","0.04094","0.04134","0.04173","0.04213","0.04252","0.04291","0.04331","0.0437","0.04409","0.04449","0.04488","0.04528","0.04567","0.04606","0.04646","0.04685","0.04724","0.04764","0.04803","0.04843","0.04882","0.04921","0.04961","0.05","0.05039","0.05079","0.05118","0.05157","0.05197","0.05236","0.05276","0.05315","0.05354","0.05394","0.05433","0.05472","0.05512","0.05551","0.05591","0.0563","0.05669","0.05709","0.05748","0.05787","0.05827","0.05866","0.05906","0.05945","0.05984","0.06024","0.06063","0.06102","0.06142","0.06181","0.0622","0.0626","0.06299","0.06339","0.06378","0.06417","0.06457","0.06496","0.06535","0.06575","0.06614","0.06654","0.06693","0.06732","0.06772","0.06811","0.0685","0.0689","0.06929","0.06969","0.07008","0.07047","0.07087","0.07126","0.07165","0.07205","0.07244","0.07283","0.07323","0.07362","0.07402","0.07441","0.0748","0.0752","0.07559","0.07598","0.07638","0.07677","0.07717","0.07756","0.07795","0.07835","0.07874","0.08071","0.08268","0.08465","0.08661","0.08858","0.09055","0.09252","0.09449","0.09646","0.09843","0.10039","0.10236","0.10433","0.1063","0.10827","0.11024","0.1122","0.11417","0.11614","0.11811","0.12008","0.12205","0.12402","0.12598","0.12795","0.12992","0.13189","0.13386","0.13583","0.1378","0.13976","0.14173","0.1437","0.14567","0.14764","0.14961","0.15157","0.15354","0.15551","0.15748","0.15945","0.16142","0.16339","0.16535","0.16732","0.16929","0.17126","0.17323","0.1752","0.17717","0.17913","0.1811","0.18307","0.18504","0.18701","0.18898","0.19094","0.19291","0.19488","0.19685","0.07913","0.07953","0.07992","0.08031","0.0811","0.0815","0.08189","0.08228","0.08307","0.08346","0.08386","0.08425","0.08504","0.08543","0.08583","0.08622","0.08701","0.0874","0.0878","0.08819","0.08898","0.08937","0.08976","0.09016","0.09094","0.09134","0.09173","0.09213","0.09291","0.09331","0.0937","0.09409","0.09488","0.09528","0.09567","0.09606","0.09685","0.09724","0.09764","0.09803","0.09882","0.09921","0.09961","0.1","0.10079","0.10118","0.10157","0.10197","0.10276","0.10315","0.10354","0.10394","0.10472","0.10512","0.10551","0.10591","0.10669","0.10709","0.10748","0.10787","0.10866","0.10906","0.10945","0.10984","0.11063","0.11102","0.11142","0.11181","0.1126","0.11299","0.11339","0.11378","0.11457","0.11496","0.11535","0.11575","0.11654","0.11693","0.11732","0.11772","0.1185","0.1189","0.11929","0.11969","0.12047","0.12087","0.12126","0.12165","0.12244","0.12283","0.12323","0.12362","0.12441","0.1248","0.1252","0.12559","0.12638","0.12677","0.12717","0.12756","0.12835","0.12874","0.12913","0.12953","0.13031","0.13071","0.1311","0.1315","0.13228","0.13268","0.13307","0.13346","0.13425","0.13465","0.13504","0.13543","0.13622","0.13661","0.13701","0.1374","0.13819","0.13858","0.13898","0.13937","0.14016","0.14055","0.14094","0.14134","0.14213","0.14252","0.14291","0.14331","0.14409","0.14449","0.14488","0.14528","0.14606","0.14646","0.14685","0.14724","0.14803","0.14843","0.14882","0.14921","0.15","0.15039","0.15079","0.15118","0.15197","0.15236","0.15276","0.15315","0.15394","0.15433","0.15472","0.15512","0.15591","0.1563","0.15669","0.15709"],"Shank Diameter - Metric (d)":["3","4","5"],"Flute Length - Metric (FL)":["1.5","2","2.5","3","3.5","4","4.5","5","5.5","6","7","8","9","10","11","12","13","14","16","18","20","22","24","26"],"Diameter - Metric (D)":["0.2","0.21","0.22","0.23","0.24","0.25","0.26","0.27","0.28","0.29","0.3","0.31","0.32","0.33","0.34","0.35","0.36","0.37","0.38","0.39","0.4","0.41","0.42","0.43","0.44","0.45","0.46","0.47","0.48","0.49","0.5","0.51","0.52","0.53","0.54","0.55","0.56","0.57","0.58","0.59","0.6","0.61","0.62","0.63","0.64","0.65","0.66","0.67","0.68","0.69","0.7","0.71","0.72","0.73","0.74","0.75","0.76","0.77","0.78","0.79","0.8","0.81","0.82","0.83","0.84","0.85","0.86","0.87","0.88","0.89","0.9","0.91","0.92","0.93","0.94","0.95","0.96","0.97","0.98","0.99","1","1.01","1.02","1.03","1.04","1.05","1.06","1.07","1.08","1.09","1.1","1.11","1.12","1.13","1.14","1.15","1.16","1.17","1.18","1.19","1.2","1.21","1.22","1.23","1.24","1.25","1.26","1.27","1.28","1.29","1.3","1.31","1.32","1.33","1.34","1.35","1.36","1.37","1.38","1.39","1.4","1.41","1.42","1.43","1.44","1.45","1.46","1.47","1.48","1.49","1.5","1.51","1.52","1.53","1.54","1.55","1.56","1.57","1.58","1.59","1.6","1.61","1.62","1.63","1.64","1.65","1.66","1.67","1.68","1.69","1.7","1.71","1.72","1.73","1.74","1.75","1.76","1.77","1.78","1.79","1.8","1.81","1.82","1.83","1.84","1.85","1.86","1.87","1.88","1.89","1.9","1.91","1.92","1.93","1.94","1.95","1.96","1.97","1.98","1.99","2","2.05","2.1","2.15","2.2","2.25","2.3","2.35","2.4","2.45","2.5","2.55","2.6","2.65","2.7","2.75","2.8","2.85","2.9","2.95","3","3.05","3.1","3.15","3.2","3.25","3.3","3.35","3.4","3.45","3.5","3.55","3.6","3.65","3.7","3.75","3.8","3.85","3.9","3.95","4","4.05","4.1","4.15","4.2","4.25","4.3","4.35","4.4","4.45","4.5","4.55","4.6","4.65","4.7","4.75","4.8","4.85","4.9","4.95","5","2.01","2.02","2.03","2.04","2.06","2.07","2.08","2.09","2.11","2.12","2.13","2.14","2.16","2.17","2.18","2.19","2.21","2.22","2.23","2.24","2.26","2.27","2.28","2.29","2.31","2.32","2.33","2.34","2.36","2.37","2.38","2.39","2.41","2.42","2.43","2.44","2.46","2.47","2.48","2.49","2.51","2.52","2.53","2.54","2.56","2.57","2.58","2.59","2.61","2.62","2.63","2.64","2.66","2.67","2.68","2.69","2.71","2.72","2.73","2.74","2.76","2.77","2.78","2.79","2.81","2.82","2.83","2.84","2.86","2.87","2.88","2.89","2.91","2.92","2.93","2.94","2.96","2.97","2.98","2.99","3.01","3.02","3.03","3.04","3.06","3.07","3.08","3.09","3.11","3.12","3.13","3.14","3.16","3.17","3.18","3.19","3.21","3.22","3.23","3.24","3.26","3.27","3.28","3.29","3.31","3.32","3.33","3.34","3.36","3.37","3.38","3.39","3.41","3.42","3.43","3.44","3.46","3.47","3.48","3.49","3.51","3.52","3.53","3.54","3.56","3.57","3.58","3.59","3.61","3.62","3.63","3.64","3.66","3.67","3.68","3.69","3.71","3.72","3.73","3.74","3.76","3.77","3.78","3.79","3.81","3.82","3.83","3.84","3.86","3.87","3.88","3.89","3.91","3.92","3.93","3.94","3.96","3.97","3.98","3.99"],"Helix Angle - Degree":"30","Feature 3":"Available in a wide range of micro mm sizes","Substrate":"Carbide","Web Literature 1":["8002024CA-DR,115|8002024CA-DRT,28","8002024CA-DR,116|8002024CA-DRT,28","8002024CA-DR,162|8002024CA-DRT,28","8002024CA-DR,198|8002024CA-DRT,28"],"Shank Tolerance":"h6","Short Description":"High Performance Carbide Miniature Drills from 0.2mm up to 5mm in size","Web Literature 4":"800387CA","Brand":"EXOCARB","Point Thinning":["Four Facet Point","Three Rake Thinning"],"Length of Cut - Specification":["JOBBER","STUB"],"Benefit 2":"Greater resistance to heat and wear","Web Literature 2":"80060CA-V2|800291CA","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Cast Iron":"K; Good","Low Carbon Steel : 1010; 1018":"P; Best","Medium Carbon Steel : 1035; 1045":"P; Best","Benefit 1":"Improves wear resistance for long tool life","Stainless Steels : 17-4PH":"M; Good","Coolant Thru":"No","Alloy Steels : 4140; 4340":"P; Good","Die Steels":"P; Good","Stainless Steels : 300":"M; Good","Stainless Steels : 400":"M; Good","Units":"Metric","Product Overview":"Miniature, 0.2mm up to 5mm","Cutting Direction":"RH","High Carbon Steel : 1065":"P; Best","View Speed and Feed Page":"Here","View Catalog Page":"Here","Helix Direction":"RH","Cutting Diameter Tolerance - Inch":"+0 / -0.0004","Feature 1":"Tungsten Carbide","Benefit 3":"When precision matters","Cutting Diameter Tolerance - Metric":"+0 / -0.010","List Name":"WX-MS-GDS","Titanium : 6AL4V (30HRC)":"S; Good","Full Description":"The EXOCARB MAX-MINI WX-MS series is the ultra-premium solution for processing micro-sized holes from 0.2mm through 5.0mm in difficult to machine materials. Made of sub-micrograin carbide, this drill features a unique flute designed for both rigidity and wide chip room.","Surface Treatment":"TiAlN","Feature 2":"TiALN coating","Point Angle - Degree (α)":["140","130"],"Diameter-Sizes":"0.00787\" - 5mm","Flute-Sizes":"1.5mm - 26mm","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"38mm - 64mm","Shank-Sizes":"3mm - 5mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FJobber%20Drills%2FList%205330/Drills_-_Drill_-_EXOCARB_MAX-MINI_-_List_5330_-_Catalog"],"Friendly Name":"5330"}

{"Number of Flutes":"2","Drilling L/D Ratio (xD)":"10","Overall Length - Metric (L)":["42","46","50","54","58","62","66"],"Diameter - Inch (D)":["0.01969","0.02126","0.02165","0.02205","0.02362","0.0248","0.0252","0.02559","0.02756","0.02795","0.02835","0.02874","0.02913","0.02953","0.0315","0.03189","0.03228","0.03543","0.03583","0.03622","0.03937","0.04331","0.0437","0.04409","0.04528","0.04724","0.05","0.05039","0.05079","0.05118","0.05512","0.05709","0.05748","0.05787","0.05906","0.05945","0.05984","0.06024","0.06102","0.06142","0.06181","0.06299","0.06693","0.07087","0.07126","0.07165","0.07205","0.0748","0.07795","0.07835","0.07874","0.08268","0.08346","0.08386","0.08425","0.08661","0.09016","0.09055","0.09094","0.09409","0.09449","0.09488","0.09528","0.09843","0.10039","0.10079","0.10118","0.10236","0.1063","0.10906","0.10945","0.10984","0.11024","0.11417","0.11811"],"Shank Diameter - Metric (d)":["3"],"Flute Length - Metric (FL)":["6","6.6","7.2","7.8","8.4","9","9.6","10.2","10.8","11.4","12","13.2","13.8","14.4","15.6","16.8","17.4","18","18.6","19.2","20.4","21.6","22.2","22.8","24","25.2","25.8","26.4","27.6","28.2","28.8","29.4","30","30.6","31.2","32.4","33.6","34.8","36"],"Diameter - Metric (D)":["0.5","0.54","0.55","0.56","0.6","0.63","0.64","0.65","0.7","0.71","0.72","0.73","0.74","0.75","0.8","0.81","0.82","0.9","0.91","0.92","1","1.1","1.11","1.12","1.15","1.2","1.27","1.28","1.29","1.3","1.4","1.45","1.46","1.47","1.5","1.51","1.52","1.53","1.55","1.56","1.57","1.6","1.7","1.8","1.81","1.82","1.83","1.9","1.98","1.99","2","2.1","2.12","2.13","2.14","2.2","2.29","2.3","2.31","2.39","2.4","2.41","2.42","2.5","2.55","2.56","2.57","2.6","2.7","2.77","2.78","2.79","2.8","2.9","3"],"Helix Angle - Degree":"30","Feature 3":"Available in a wide range of micro mm sizes","Benefit 2":"Better chip evacuation and lowers friction during drilling process","Substrate":"Carbide","Shank Tolerance":"h6","Web Literature 1":"8002024CA-DR,283|8002024CA-DRT,29","Benefit 4":"Enables deeper drilling","Short Description":"High Performance Carbide Miniature Drills from 0.5mm up to 3mm in size. For Stainless Steel applications","Brand":"EXOCARB","Web Literature 4":"800387CA","Point Thinning":["Four Facet Point","X Thinning"],"Web Literature 2":"80060CA-V2|800291CA","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Feature 4":"Longer flute length","Stainless Steels : 17-4PH":"M; Best","Stainless Steels : 300":"M; Best","Stainless Steels : 400":"M; Best","Benefit 1":"Improves wear resistance for long tool life","Alloy Steels : 4140; 4340":"P; Good","Coolant Thru":"No","Die Steels":"P; Good","High Carbon Steel : 1065":"P; Good","Low Carbon Steel : 1010; 1018":"P; Good","Medium Carbon Steel : 1035; 1045":"P; Good","Units":"Metric","Product Overview":"Miniature, 0.5mm up to 3mm, Stainless Steel applications","List Name":"MRS-GDL","Cutting Direction":"RH","View Speed and Feed Page":"Here","View Catalog Page":"Here","Helix Direction":"RH","Cutting Diameter Tolerance - Inch":"+0 / -0.0003","Feature 1":"Tungsten Carbide","Surface Treatment":"Super Smooth","Feature 2":"Super Smooth coating","Length of Cut - Specification":"TAPER","Cutting Diameter Tolerance - Metric":"+0 / -0.008","Benefit 3":"When precision matters","Full Description":"The EXOCARB MAX-MINI MRS series is the ultra-premium solution for machining micro-sized holes as small as 0.5mm in aluminum and stainless steel. Made of sub-micrograin carbide, this drill features a unique flute designed for both rigidity and wide chip room.","Titanium : 6AL4V (30HRC)":"S; Good","Point Angle - Degree (α)":"120","Diameter-Sizes":"0.01969\" - 3mm","Flute-Sizes":"6mm - 36mm","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"42mm - 66mm","Shank-Sizes":"3mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FTaper%20Drills%2FList%205340/Drills_-_Drill_-_EXOCARB_MAX-MINI_-_List_5340_-_Catalog"],"Friendly Name":"5340"}

{"Number of Flutes":"2","Drilling L/D Ratio (xD)":"2","Diameter - Inch (D)":["0.02756","0.02953","0.0315","0.03346","0.03543","0.0374","0.03937","0.04331","0.04724","0.05118","0.05512","0.05906","0.06299","0.06693","0.07087","0.0748","0.07874"],"Overall Length - Metric (L)":["47","50","53","58"],"Shank Diameter - Metric (d)":["3"],"Flute Length - Metric (FL)":["4.2","4.5","4.8","5.1","5.4","5.7","6","6.6","7.2","7.8","8.4","9","9.6","10.2","10.8","11.4","12"],"Diameter - Metric (D)":["0.7","0.75","0.8","0.85","0.9","0.95","1","1.1","1.2","1.3","1.4","1.5","1.6","1.7","1.8","1.9","2"],"Helix Angle - Degree":"30","Notes":"Can be used as Pilot Drill for long type drills (ADO-MICRO 12D, 20D, and 30D).","Substrate":"Carbide","Benefit 4":"Chips are discharged from the tip of the flute to the extended flute with enhanced evacuation capability","Web Literature 1":"8002024CA-DR,283|8002024CA-DRT,10","Feature 2":"Double Margin","Shank Tolerance":"h6","Web Literature 2":"800311CA","Feature 4":"Extended Flute","Web Literature 4":"800387CA","Hardened Steels : 35 HRC":"H; Best","Cast Iron":"K; Best","Web Video 3":"https://www.youtube.com/watch?v=4-hTRZ9ecOA","High Carbon Steel : 1065":"P; Best","Brand":"A Brand","Benefit 1":"Large flow volume enables superior chip evacuation","Hardened Steels : 35-45 HRC":"H; Good","Web Video 1":"https://www.youtube.com/watch?v=QSKdyt7u9jg","List Name":"ADO-MICRO-2D","Aluminum : 6061; 7075":"N; Good","Stainless Steels : 17-4PH":"M; Best","Web Video 2":"https://www.youtube.com/watch?v=zEjOcYRvrAs","Low Carbon Steel : 1010; 1018":"P; Best","Stainless Steels : 300":"M; Best","Surface Treatment":"IchAda","Feature 3":"IchAda Coating","Aluminum : Casting":"N; Good","Stainless Steels : 400":"M; Best","Medium Carbon Steel : 1035; 1045":"P; Best","Feature 1":"Oil Holes","Benefit 3":"Provides excellent surface smoothness","Units":"Metric","Alloy Steels : 4140; 4340":"P; Best","Die Steels":"P; Best","View Speed and Feed Page":"Here","View Catalog Page":"Here","Cutting Direction":"RH","Length of Cut - Specification":"STUB","Helix Direction":"RH","Benefit 2":"Supports straightness of drill direction","Full Description":"The A Brand ADO-MICRO is ideal for applications in carbon steel, alloy steel, stainless steel, cast iron, ductile cast iron, aluminum alloy, titanium alloy and heat resistant alloy.","Short Description":"The A Brand ADO-MICRO is ideal for applications in carbon steel, alloy steel, stainless steel, cast iron, ductile cast iron, aluminum alloy, titanium alloy and heat resistant alloy.","Nickel Alloy : Inconel":"S; Good","Point Thinning":"X Thinning","Titanium : 6AL4V (30HRC)":"S; Good","Cutting Diameter Tolerance - Inch":"+0.00004 / +0.0004","Cutting Diameter Tolerance - Metric":"+0.001 / +0.010","Coolant Thru":"Yes","Point Angle - Degree (α)":"140","Product Overview":"2xD, Coolant Thru, IchAda Coating","Diameter-Sizes":"0.02756\" - 2mm","Flute-Sizes":"4.2mm - 12mm","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"47mm - 58mm","Shank-Sizes":"3mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FStub%20Drills%2FList%206501/Drills_-_Drill_-_A_Brand_ADO-MICRO_-_List_6501_-_Catalog"],"Friendly Name":"6501"}