Hardened Steel
Hardened Steel
MOQ: 1
PDF generation may take time depending on details of the product.
| Thread Size - Metric | M4 |
| Thread Type | M |
| Pitch | 0.7 |
| Thread Limit | OH3 |
| Chamfer Type | Modified Bottom (3P) |
| Major Diameter - Metric | 4 |
| Thread Length - Metric (Lc) | 13 |
| Tap Drill Size Min - Metric | 3.242 |
| Tap Drill Size Max - Metric | 3.422 |
| Neck Length - Metric (L1) | 21 |
| Overall Length - Metric (L) | 51.9 |
| Shank Diameter - Metric (d) | 5 |
| Square Length - Metric (Ik) | 7 |
| Square Width - Metric (k) | 4 |
| STI Thread | No |
| Substrate | Carbide |
| Surface Treatment | V |
| Coolant Thru | No |
| Number of Flutes | 4 |
| Cutting Direction | RH |
| Helix Angle - Degree | 0 |
| Interrupted Thread | No |
| View Catalog Page | Here |
| STP Drawing | Download |
| Notes | Tapping Guidlines 1. Set tapping speed between 3 ~ 10 SFM. 2. Choose largest hole-size possible, within the recommended tolerance range. 3. Use a non-water soluble cutting fluid. 4. Use highly rigit machine and tool holders. 5. Tapping by hand is NOT |
Downloading may take time depending on number of products.
